Search

Context. Understanding planetesimal formation is an essential first step towards understanding planet formation. The distribution of these first solid bodies drives the locations where planetary embryos, which eventually form fully-fledged planets, grow. Aims. We seek to understand the parameter space of possible protoplanetary disk formation and evolution models of our Solar System. A good protoplanetary disk scenario for the Solar System must meet at least the following three criteria: (1) It must produce an extended gas and dust disk (e.g. 45 au for the dust); (2) within the disk, the local dust-to-gas ratio in at least two distinct locations must sufficiently increase to explain the early formation of the parent bodies of non-carbonaceous and carbonaceous iron meteorites; and (3) dust particles, which have condensed at high temperatures (i.e. calcium–aluminium-rich inclusions), must be transported to the outer disk. Though current protoplanetary disk models are able to satisfy one or two of these criteria, none have been successful in recreating all three. We aim to find scenarios that satisfy all three. Methods. In this study we used a 1D disk model that tracks the evolution of the gas and dust disks. Planetesimals are formed within the disk at locations where the streaming instability can be triggered. We explored a large parameter space to study the effect of the disk viscosity, the timescale of infall of material into the disk, the distance within which material is deposited into the disk, and the fragmentation threshold of dust particles. Results. We find that scenarios with a large initial disk viscosity (α > 0.05), a relatively short infall timescale (Tinfall < 100–200kyr), and a small centrifugal radius (RC~ 0.4 au; i.e. the distance within which material falls into the disk) result in disks that satisfy all three criteria needed to represent the protoplanetary disk of the Solar System. The large initial viscosity and short infall timescale result in a rapid initial expansion of the disk, which we dub the 'inflationary phase' of the disk. Furthermore, a temperature-dependent fragmentation threshold, which accounts for cold icy particles breaking more easily, results in larger and more massive disks. This, in turn, results in more 'icy' than 'rocky' planetesimals. Such scenarios are also better in line with our Solar System, which has small terrestrial planets and massive giant planet cores. Finally, we find that scenarios with large RC cannot transport calcium–aluminium-rich inclusions to the outer disk and do not produce planetesimals at two locations within the disk. [ABSTRACT FROM AUTHOR]

Mercury is notoriously difficult to form in Solar System simulations, due to its small mass and iron-rich composition. Smooth particle hydrodynamics simulations of collisions have found that a Mercury-like body could be formed by one or multiple giant impacts, but due to the chaotic nature of collisions, it is difficult to create a scenario where such impacts will take place. Recent work has found more success forming Mercury analogues by adding additional embryos near Mercury's orbit. In this work, we aim to form Mercury by simulating the formation of the Solar System in the presence of the giant planets Jupiter and Saturn. We test out the effect of an inner disk of embryos added on to the commonly used narrow annulus of initial material. We form Mercury analogues with core-mass fractions (CMFs) > 0.4 in ∼10% of our simulations, and twice that number of Mercury analogues form during the formation process but are unstable and do not last to the end of the simulations. Mercury analogues form at similar rates for both disks with and without an inner component, and most of our Mercury analogues have lower CMFs than that of Mercury, ∼0.7, due to significant accretion of debris material. We suggest that a more in-depth understanding of the fraction of debris mass that is lost to collisional grinding is necessary to understand Mercury's formation, or some additional mechanism is required to stop this debris from accreting. [ABSTRACT FROM AUTHOR]

The Dwarf Planet Ceres revealed the presence of ammonia and other unique properties compared to other asteroids in the main belt which suggests that it was not formed in situ. We model the early dynamical evolution of the outer Solar System to study possible dynamical mechanisms to implant a Ceres-sized planetesimal in the asteroid belt from the trans-Saturnian region. We calculate that the fraction of the population of Ceres-sized planetesimals that are captured in the asteroid belt is in the range of 2. 8 × 1 0 − 5 to 1. 2 × 1 0 − 3 depending on the initial location in the outer planetesimal disk. The captured bodies have a 70% probability to have a semimajor axis between 2.5 and 3 au, a 33% probability to have an eccentricity smaller than 0.2 and a 45% probability to have an orbital inclination smaller than 10°. Assuming the existence of 3,600 Ceres-size planetesimals in the inner part of the trans-Saturnian disk, consistent with the estimate of Nesvorný and Vokrouhlický (2016) for the trans-Neptunian disk, our estimated capture probability and a final 80% depletion of the asteroid belt during the subsequent giant planet instability, lead to capture ∼ 1 Ceres in the asteroid belt, with a probability of 15%, 34%, and 51% to be located in the inner, middle and outer belt respectively. • We model the early evolution of Solar System to investigate the origin of Ceres. • Our model can lead to capture of one Ceres in the Asteroid Belt. • The probability of Ceres is in the inner belt is 15%. • The probability of Ceres is in the middle belt is 34%. • The probability of Ceres is in the outer belt is 51%. [ABSTRACT FROM AUTHOR]

Rocky planets both in and outside of our solar system are observed to have a range of core-mass fractions (CMFs). Imperfect collisions can preferentially strip mantle material from a planet, changing its CMF, and are therefore thought to be the most likely cause of this observed CMF variation. However, previous work that implements these collisions into N -body simulations of planet formation has struggled to reliably form high CMF super-Earths. In this work, we specify our initial conditions and simulation parameters to maximize the prevalence of high-energy, CMF-changing collisions in order to form planets with highly diverse CMFs. High-energy collisions have a large v imp/ v esc ratio, so we maximize this ratio by starting simulations with high eccentricity and inclination disks to increase the difference in their orbital velocities, maximizing v imp. Additionally, we minimize v esc by starting with small embryos. The final planets undergo more high-energy, debris-producing collisions, and experience significant CMF change over their formation. However, we find that a number of processes work together to average out the CMF of a planet over time; therefore, we do not consistently form high CMF, high-mass planets. We do form high CMF planets below 0.5 M ⊕. Additionally, we find, in these highly eccentric environments, loss of debris mass due to collisional grinding has a significant effect on final planet masses and CMFs, resulting in smaller planets and a higher average planet CMF. This work highlights the importance of improving measurements of high-density planets to better constrain their CMFs. [ABSTRACT FROM AUTHOR]

The article presents a study that explores the terrestrial planet formation from lost inner solar system material . It mentions about the low fraction of outer solar system material in Earth and Mars indicates the presence of a persistent dust-drift barrier in the disk, highlighting the specific pathway of rocky planet formation in the solar system.

The giant planets of the Solar System formed on initially compact orbits, which transitioned to the current wider configuration by means of an orbital instability. The timing of that instability is poorly constrained. In this work, we use dynamical simulations to demonstrate that the instability implanted planetesimal fragments from the terrestrial planet region into the asteroid main belt. We use meteorite data to show that the implantation occurred >60 million years (Myr) after the Solar System began to form. Combining this constraint with a previous upper limit derived from JupiterÕs trojan asteroids, we conclude that the orbital instability occurred 60 to 100 Myr after the beginning of Solar System formation. The giant impact that formed the Moon occurred within this range, so it might be related to the giant planet instability. [ABSTRACT FROM AUTHOR]

Uncovering the formation process that reproduces the distinct properties of compact super-Earth exoplanet systems is a major goal of planet formation theory. The most successful model argues that non-resonant systems begin as resonant chains of planets that later experience a dynamical instability. However, both the boundary of stability in resonant chains and the mechanism of the instability itself are poorly understood. Previous work postulated that a secondary resonance between the fastest libration frequency and a difference in synodic frequencies destabilizes the system. Here, we use that hypothesis to produce a simple and general criterion for resonant chain stability that depends only on planet orbital periods and masses. We show that the criterion accurately predicts the maximum mass of planets in synthetic resonant chains up to six planets. More complicated resonant chains produced in population synthesis simulations are found to be less stable than expected, although our criterion remains useful and superior to machine learning models. • Resonant chain stability is set by interaction of synodic and libration frequencies • A simple criterion for stability accurately predicts emergence of chaotic behavior • Resonant chains formed in population synthesis models are less stable than expected [ABSTRACT FROM AUTHOR]

The lunar crater record features ∼ 50 basins. The radiometric dating of Apollo samples indicates that the Imbrium basin formed relatively late — from the planet formation perspective — some ≃ 3. 9 Ga. Here we develop a dynamical model for impactors in the inner solar system to provide context for the interpretation of the lunar crater record. The contribution of cometary impactors is found to be insignificant. Asteroids produced most large impacts on the terrestrial worlds in the last ≃ 3 Gyr. The great majority of early impactors were rocky planetesimals left behind at ∼ 0. 5 –1.5 au after the terrestrial planet accretion. The population of terrestrial planetesimals was reduced by disruptive collisions in the first t ∼ 20 Myr after the gas disk dispersal. We estimate that there were ∼ 4 × 1 0 5 diameter d > 10 km bodies when the Moon formed (total planetesimal mass ∼ 0. 015 M Earth at t ∼ 50 Myr). The early bombardment of the Moon was intense. To accommodate ∼ 50 known basins, the lunar basins that formed before ≃ 4. 35 –4.41 Ga must have been erased. The late formation of Imbrium occurs with a ∼ 15 –35% probability in our model. About 20 d > 10 -km bodies were expected to hit the Earth between 2.5 and 3.5 Ga, which is comparable to the number of known spherule beds in the late Archean. We discuss implications of our model for the lunar/Martian crater chronologies, Late Veneer, and noble gases in the Earth atmosphere. • The leftover planetesimals produced most lunar impacts in the first 1 Gyr. • The early lunar crater record in the first 200 Myr must have been erased. • The Imbrium basin formation happens with a 15%–35% probability in our model. • Applying the lunar chronology to Mars can lead to incorrect age estimates. • The model explains the terrestrial spherule beds found in the late Archean. [ABSTRACT FROM AUTHOR]