Search

Hydrogen (H 2) is pivotal to phasing out fossil fuel-based energy systems. It can be produced from different sources and using different technologies. Very few studies comprehensively discuss all available state-of-the-art technologies for H 2 production, the challenges facing each process, and their economic feasibility and sustainability. The current study thus addresses these gaps to effectively direct future research towards improving H 2 production techniques. Many conventional methods contribute to large greenhouse gas footprints, with high production costs and low efficiency. Steam methane reforming and coal gasification dominate the supply side of H 2 , due to their low production costs (<$3.50/kg). Water-splitting offers one of the most environmentally benign production methods when integrated with renewable energy sources. However, it is considerably expensive and ridden with the flaw of production of harmful by-products that affect efficiency. Fossil fuel processing technologies remain one of the most efficient forms of H 2 production sources, with yields exceeding 80% and reaching up to 100%, with the lowest cost despite their high reliance on expensive catalysts. Whereas solar-driven power systems cost slightly less than $10 kg−1, coal gasification and steam reforming cost below $3.05 kg−1. Future research thus needs to be directed towards cost reduction of renewable energy-based H 2 production systems, as well as in their decarbonization and designing more robust H 2 storage systems that are compatible with long-distance distribution networks with adequate fuelling stations. • H 2 production technologies, their economic feasibility and sustainability are reviewed. • Low-cost steam methane reforming and coal gasification dominate the supply side of H 2. • Water-splitting coupled with renewable sources offers one of the most eco-friendly methods. • Future research should focus on decarbonizing and lowering renewable H 2 production cost. [ABSTRACT FROM AUTHOR]

Microalgae originating from wastewater has been exhibiting particularly promising results in terms of biohydrogen production and wastewater treatment. This paper aims to review the factors affecting production, pretreatment techniques to improve synthesis, advanced technologies utilized for enhancing biohydrogen production, and techno-economic feasibility evaluation of the processes at a commercial scale. Microalgae possess metabolic components to synthesize biohydrogen using photobiological and fermentative processes but must undergo pretreatment for efficient biohydrogen production. The efficiency of these processes is influenced by factors such as the microalgae species, light intensity, cell density, pH, temperature, substrates, and the type of bioreactors. Moreover, many limitations, such as oxygen sensitivity, altered thylakoid constitution, low photon conversion efficiency, light capture disruption, and the evolution of harmful by-products hinder the sustainability of biohydrogen production processes. High operational and maintenance costs serve as the major bottleneck in the scaling up of the process as an industrial technology. Therefore, future research needs to be directed towards increasing optimization of the processes by reducing energy and resource demand, recycling metabolic wastes and process components, genetically engineered microalgae to adopt more efficient routes, and conducting pilot studies for commercialization. • Wastewater-based microalgae is a potential source of biohydrogen. • Factors affecting the biohydrogen production from microalgal biomass are discussed. • Technologies related to biohydrogen production from microalgae are reviewed. • Key challenges of biohydrogen production process from microalgae are highlighted. [ABSTRACT FROM AUTHOR]

Biogas production is rising in the context of fossil fuel decline and the future circular economy, yet raw biogas requires purification steps before use. Here, we review biogas upgrading using physical, chemical and biological methods such as water scrubbing, physical absorption, pressure swing adsorption, cryogenic separation, membrane separation, chemical scrubbing, chemoautotrophic methods, photosynthetic upgrading and desorption. We also discuss their techno-economic feasibility. We found that physical and chemical upgrading technologies are near-optimal, but still require high energy and resources. Biological methods are less explored despite their promising potential. High-pressure water scrubbing is more economic for small-sized plants, whereas potassium carbonate scrubbing provides the maximum net value for large-sized plants. [ABSTRACT FROM AUTHOR]

This paper offers a comprehensive analysis of algal-based membrane bioreactors (AMBRs) and their potential for removing hazardous and toxic contaminants from wastewater. Through an identification of contaminant types and sources, as well as an explanation of AMBR operating principles, this study sheds light on the promising capabilities of AMBRs in eliminating pollutants like nitrogen, phosphorus, and organic matter, while generating valuable biomass and energy. However, challenges and limitations, such as the need for process optimization and the risk of algal-bacterial imbalance, have been identified. To overcome these obstacles, strategies like mixed cultures and bioaugmentation techniques have been proposed. Furthermore, this study explores the wider applications of AMBRs beyond wastewater treatment, including the production of value-added products and the removal of emerging contaminants. The findings underscore the significance of factors such as appropriate algal-bacterial consortia selection, hydraulic and organic loading rate optimization, and environmental factor control for the success of AMBRs. A comprehensive understanding of these challenges and opportunities can pave the way for more efficient and effective wastewater treatment processes, which are crucial for safeguarding public health and the environment. [Display omitted] • Algal-based MBRs effectively remove hazardous contaminants. • Challenges remain in biomass accumulation, nutrient limitation, and toxicity. • Mitigation strategies include system optimization and use of renewable energy. • Potential applications beyond wastewater treatment include biofuel and bioproduct production. [ABSTRACT FROM AUTHOR]

[Display omitted] • Marine emission possesses both environmental and human health risks. • Alternative fuels including hydrogen can reduce harmful emissions from marine transport. • Alternative fuels have the potential to promote UN Sustainable Development Goals. • The potential challenges of alternative fuel in marine transport are highlighted. The International Maritime Organization (IMO) has placed stricter controls on several aspects of global maritime transport operations to protect the environment. In light of this, the goal of this study is to examine and assess the different prospective paths and technologies that will assist the shipping industry in decarbonizing its operations. We consider how the utilisation of various alternative energy sources reduces greenhouse gas (GHG) emissions from marine transportation and contributes to the promotion of the United Nations Sustainable Development Goals (SGDs). The complexities associated with maritime industry operations using alternative energy sources are also explored. Biofuel as an alternative energy source, including biomethanol and biodiesel, can reduce greenhouse gas emissions in the shipping industry by 25% to 100%. However, the current supply of biofuels can only meet about 15% of the total demand which is not sufficient to sustainably power the entire marine fleet. There are several issues associated with these biofuels, including oxidation, ecological consequences, feedstock availability, technical and operational constraints, and economic factors that must be addressed before their full potential may be achieved. [ABSTRACT FROM AUTHOR]

• Novel conceptual methods for tuning microalgae to aviation biofuel were presented. • Conversion methods that directly act on wet algae biomass are highly desired. • Chemical methods are able to obtain a maximum lipid yield of 98% • Microalgae bio-jet fuel parameters are compiled with ASTM standards. • Zeolite catalytic pyrolysis increased the bio-oil yield from Microalgae to 80 %. Concerns have been raised about the effects of fossil fuel combustion on global warming and climate change. Fuel consumer behavior is also heavily influenced by factors such as fluctuating fuel prices and the need for a consistent and reliable fuel supply. Microalgae fuel is gaining popularity in the aviation industry as a potential source of energy diversification. Microalgae can grow in saltwater or wastewater, capture CO 2 from the atmosphere and produce lipids without requiring a large amount of land. As a result, the production of oil from microalgae poses no threat to food availability. The low carbon footprint of microalgae-derived fuels has the potential to mitigate the impact of traditional aviation fuels derived from petroleum on climate change and global warming. Therefore, aviation fuels derived from microalgae have the potential to be a more environmentally friendly and sustainable alternative to conventional fuels. Gathering microalgal species with a high lipid content, drying them, and turning them into aviation fuel is an expensive process. The use of biofuels derived from microalgae in the aviation industry is still in its infancy, but there is room for growth. This study analyses the potential routes already researched, their drawbacks in implementation, and the many different conceptual approaches that can be used to produce sustainable aviation fuel from microalgal lipids. Microalgae species with fast-growing rates require less space and generate lipids that can be converted into biofuel without imperiling food security. The key challenges in algal-based aviation biofuel include decreased lipid content, harvesting expenses, and drying procedure that should be enhanced and optimized to increase process viability. [ABSTRACT FROM AUTHOR]

• Second-generation feedstocks have potential to be used as aviation fuel. • A multicriteria decision analysis tool is used to assess the suitability of the feedstocks. • The fatty acid-based properties of more than 50% feedstocks meet international biofuel standards. • The modification of some fuel properties is needed to meet the strict aviation fuel standards. This paper examines the potential of suitable second-generation feedstocks for sustainable aviation fuel production, theoretically based on fatty acid-based fuel properties. The fatty acid composition of 38 s-generation feedstocks was collected from the literature. The fuel properties of these feedstocks were then calculated using empirical formula and assessed according to international fuel standards including American and European standards. The selected feedstocks were assessed and ranked using a multi-criteria decision analysis (MCDA) tool, i.e., PROMETHEE GAIA, to identify the suitability of the sources based on kinematic viscosity (KV), density (D), higher heating value (HHV), cetane number (CN), iodine value (IV), oxidation stability (OS), and cold filter plugging point (CFPP). It was found that 20 of the 38 feedstocks meet international fuel standards. The utilisation of the MCDA tool indicates that Ricinus communis is the highest-ranked feedstock for sustainable aviation fuel production, followed by the Azadirachta indica feedstock, with Sterculia feotida L. the lowest-ranked feedstock. The assessment of the properties of ranked feedstock against aviation fuel standards, including Jet A and Jet A1, reveals that the kinematic viscosity of all the feedstocks meets both these standards. However, fatty acid-based fuel properties could not satisfy the international aviation fuel standards for D, HHV, and freezing points. Further experimental work is recommended, including improvements in the processing and modification of biofuel produced from second-generation feedstocks. It is recommended that a comprehensive action plan is required to facilitate the introduction of sustainable biofuel from non-edible sources for the aviation industry, such as the adjustment of the current jet fuel standards. [ABSTRACT FROM AUTHOR]

The goal of this review is to offer an all-encompassing evaluation of an integrated solar energy system within the framework of solar energy utilization. This holistic assessment encompasses photovoltaic technologies, solar thermal systems, and energy storage solutions, providing a comprehensive understanding of their interplay and significance. It emphasizes the importance of solar energy as a renewable resource and its role in addressing global energy demand and mitigating climate change. The review highlights the significance of advancements in various solar energy technologies, focusing on their environmental benefits, including greenhouse gas emissions reduction and air and water pollution mitigation. It explores the evolution of photovoltaic technologies, categorizing them into first-, second-, and third-generation photovoltaic cells, and discusses the applications of solar thermal systems such as water heaters, air heaters, and concentrators. The paper examines key advancements in energy storage solutions for solar energy, including battery-based systems, pumped hydro storage, thermal storage, and emerging technologies. It references recent published literature to present findings on energy payback time, carbon footprint, and performance metrics. Challenges to widespread adoption are discussed, including cost and economic viability, intermittency, environmental impacts, and grid integration. Strategies to overcome these challenges, such as cost reduction, policy support, energy storage integration, and sustainable practices, are presented based on published literature. By bridging gaps in existing literature, this comprehensive resource aims to equip researchers, policymakers, and industry professionals with insights into forging a sustainable and renewable energy future. [ABSTRACT FROM AUTHOR]

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO 2) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment. [Display omitted] • The current state of nanotechnology research for wastewater treatment is reviewed. • Iron oxides showed to be more effective than traditional CNTs. • Iron oxide achieved 75.9% COD removal efficiency while TiO 2 could remove 75.5%. • Long-term effects on wastewater treatment could be achieved by using nanocomposites. • Before nanotechnology to be widely used, it must become affordable and commercialized. [ABSTRACT FROM AUTHOR]

Bio-electrochemical systems, such as microbial fuel cells (MFCs), serve as greener alternatives to conventional fuel energy. Despite the burgeoning review works on MFCs, comprehensive discussions are lacking on MFC designs and applications. This review paper provides insights into MFC applications, substrates used in MFC and the various design, technological, and chemical factors affecting MFC performance. MFCs have demonstrated efficacy in wastewater treatment of at least 50% and up to 98%. MFCs have been reported to produce ∼30 W/m2 electricity and ∼1 m3/d of biohydrogen, depending on the design and feedstock. Electricity generation rates of up to 5.04 mW/m−2–3.6 mW/m−2, 75–513 mW/m−2, and 135.4 mW/m−2 have been found for SCMFCs, double chamber MFCs, and stacked MFCs with the highest being produced by the single/hybrid single-chamber type using microalgae. Hybrid MFCs may emerge as financially promising technologies worth investigating due to their low operational costs, integrating low-cost proton exchange membranes such as PVA-Nafion-borosilicate, and electrodes made of natural materials, carbon, metal, and ceramic. MFCs are mostly used in laboratories due to their low power output and the difficulties in assessing the economic feasibility of the technology. The MFCs can generate incomes of as much as $2,498.77 × 10−2/(W/m2) annually through wastewater treatment and energy generation alone. The field application of MFC technology is also narrow due to its microbiological, electrochemical, and technological limitations, exacerbated by the gap in knowledge between laboratory and commercial-scale applications. Further research into novel and economically feasible electrode and membrane materials, the improvement of electrogenicity of the microbes used, and the potential of hybrid MFCs will provide opportunities to launch MFCs from the laboratory to the commercial-scale as a bid to improve the global energy security in an eco-friendly way. [Display omitted] • MFCs, serve as greener alternatives to conventional fuel energy. • 30 days of MFC operation can yield up to 10.38 mA current and remove 94.3% of COD by bacterial strains. • MFCs are capable of generating ∼30 W/m2 of electricity and ∼1 m3/d of biohydrogen. • MFCs have a wastewater treatment efficacy of at least 50% and up to 98%. • MFC technology is narrow due to its microbiological, electrochemical, and technological limitations. [ABSTRACT FROM AUTHOR]

• Physical and chemical pretreatment show great effectiveness but need huge energy. • Biological pretreatment can address most challenges but with long incubation times. • Hybrid technologies gain popularity and improve the chemical yield. • Pretreatment of lignocellulosic biomass account for 40% of total production costs. • Optimization of process parameters need for techno-economically feasible. As the world attempts to transition from fossil fuels, lignocellulosic biomass (LCB) serves as a promising alternative due to its high abundance. Hydrolysing LCB can generate various bioproducts, such as biofuels and value-added chemicals. However, the presence of lignin inhibits the solubilization of LCBs, presenting a major techno-economic challenge in the biorefinery concept. Therefore, this paper addresses the gaps left by most of the recent review works that fail to comprehensively review different pretreatment methods and the full scope of applications of LCBs, and do not incorporate techno-economic considerations of the technologies, the latter being the greatest bottleneck in the commercialization of the processes. The literature review revealed that while many of the physical and chemical pretreatment methods exhibit great effectiveness, they have a huge dependence on energy, chemicals, water, and/or specialized equipment, and produce harmful waste and inhibitory compounds. The pretreatment of lignocellulosic biomass can account for 40% of total production costs. Biological pretreatment can address these challenges but is limited by long incubation times. For instance, the bacterial pretreatment can noticeably reduce sawdust cellulose, hemicelluloses, and lignin contents by 35.8%, 37.1%, and 46.2%, respectively. Recently, integrated/coupling (hybrid) methods, such as chemical-assisted liquid hot water/steam and microwave or ultrasound-assisted alkaline pretreatment, have been gaining popularity due to their potential to improve chemical yield, but at the expense of the high cost of operation. To make pretreatment processes more techno-economically feasible, there is a need for process integration and the standardization and optimization of process parameters. [ABSTRACT FROM AUTHOR]

Green synthesis approaches of nanomaterials (NMs) have received considerable attention in recent years as it addresses the sustainability issues posed by conventional synthesis methods. However, recent works of literature do not present the complete picture of biogenic NMs. This paper addresses the previous gaps by providing insights into the stability and toxicity of NMs, critically reviewing the various biological agents and solvents required for synthesis, sheds light on the factors that affect biosynthesis, and outlines the applications of NMs across various sectors. Despite the advantages of green synthesis, current methods face challenges with safe and appropriate solvent selection, process parameters that affect the synthesis process, nanomaterial cytotoxicity, bulk production and NM morphology control, tedious maintenance, and knowledge deficiencies. Consequently, the green synthesis of NMs is largely trapped in the laboratory phase. Nevertheless, the environmental friendliness, biocompatibility, and sensitivities of the resulting NMs have wider applications in biomedical science, environmental remediation, and consumer industries. To the scale-up application of biogenic NMs, future research should be focused on understanding the mechanisms of the synthesis processes, identifying more biological and chemical agents that can be used in synthesis, and developing the practicality of green synthesis at the industrial scale, and optimizing the factors affecting the synthesis process. • Technological advancements of green approaches in synthesizing NMs are reviewed. • Applications and challenges of green synthesis technologies for NMs are highlighted. • Environmental friendly and biocompatibility of synthesized NM has wider application. • The green synthesis of NMs is largely trapped in the laboratory phase. • Future direction on the scale-up of biogenic NMs has been provided. [ABSTRACT FROM AUTHOR]

[Display omitted] • A new method is demonstrated for selecting microalgae strain for jetfuel production. • 17 microalgae strains were evaluated against all relevant jet fuel standards. • Chlorella sp. NT8a was the most suitable but could not meet some jet fuel standards. • Further biofuel modification is needed to satisfy all jet fuel standards. This study develops and applies the PROMETHEE-GAIA method as a new tool to select microalgae strains for aviation fuel production. Assessment involves 19 criteria with equal weighting in three aspects, namely biomass production, lipid quality, and fatty acid methylester properties. Here, the method is demonstrated for evaluating 17 candidate microalgae strains. Chlorella sp. NT8a is assessed as the most suitable strain for aviation fuel production. The results also show that unmodified biofuel from the most suitable strain could not meet all jet fuel standards. In particular, microalgae-based fuel could not satisfy the required density, heating value and freezing points of the international jet fuel standards. These results highlight the need for a broad action plan including improvement in the processing or modification of biofuel produced from microalgae and revision of the current jet fuel standards to facilitate the introduction of microalgae-based biofuel for the aviation industry. [ABSTRACT FROM AUTHOR]

[Display omitted] • Biorefinery concept for sustainable processing of microalgae biomass has been discussed. • Reactor technologies for cultivating microalgae has been reviewed. • Factors affecting the microalgae culture system has been reviewed. • Different technologies to convert microalgae into biofuel and value-added products have been presented. • The utilisation of a biorefinery concept can make the valorisation of microalgae economically viable. Microalgal biomass has been proved to be a sustainable source for biofuels including bio-oil, biodiesel, bioethanol, biomethane, etc. One of the collateral benefits of integrating the use of microalgal technologies in the industry is microalgae's ability to capture carbon dioxide during the application and biomass production process and consequently reducing carbon dioxide emissions. Although microalgae are a feasible source of biofuel, industrial microalgae applications face energy and cost challenges. To overcome these challenges, researchers have been interested in applying the bio-refinery approach to extract the important components encapsulated in microalgae. This review discusses the key steps of microalgae-based biorefinery including cultivation and harvesting, cell disruption, biofuel and value-added compound extraction along with the detailed technologies associated with each step of biorefinery. This review found that suitable microalgae species are selected based on their carbohydrate, lipid and protein contents and selecting the suitable species are crucial for high-quality biofuel and value-added products production. Microalgae species contain carbohydrates, proteins and lipids in the range of 8% to 69.7%, 5% to 74% and 7% to 65% respectively which proved their ability to be used as a source of value-added commodities in multiple industries including agriculture, animal husbandry, medicine, culinary, and cosmetics. This review suggests that lipid and value-added products from microalgae can be made more economically viable by integrating upstream and downstream processes. Therefore, a systematically integrated genome sequencing and process-scale engineering approach for improving the extraction of lipids and co-products is critical in the development of future microalgal biorefineries. [ABSTRACT FROM AUTHOR]

The utilization of microalgae in treating wastewater has been an emerging topic focussed on finding an economically sustainable and environmentally friendly approach to treating wastewater. Over the last several years, different types of con microalgae and bacteria consortia have been experimented with to explore their potential in effectively treating wastewater from different sources. The basic features considered while determining efficiency is their capacity to remove nutrients including nitrogen (N) and phosphorus (P) and heavy metals like arsenic (As), lead (Pb), and copper (Cu). This paper reviews the efficiency of microalgae as an approach to treating wastewater from different sources and compares conventional and microalgae-based treatment systems. The paper also discusses the characteristics of wastewater, conventional methods of wastewater treatment that have been used so far, and the technological mechanisms for removing nutrients and heavy metals from contaminated water. Microalgae can successfully eliminate the suspended nutrients and have been reported to successfully remove N, P, and heavy metals by up to 99.6 %, 100 %, and 13%–100 % from different types of wastewater. However, although a microalgae-based wastewater treatment system offers some benefits, it also presents some challenges as outlined in the last section of this paper. Performance in eliminating nutrients from wastewater is affected by different parameters such as temperature, biomass productivity, osmotic ability, pH, O 2 concentration. Therefore, the conducting of pilot-scale studies and exploration of the complexities of contaminants under complex environmental conditions is recommended. • Utilization of Microalgae is an environment-friendly method to treat the wastewater. • Microalgae removes the suspended nutrients and polluting compounds from wastewater. • The efficiency of microalgae-based wastewater treatment technology is presented. • Challenges of using microalgae in wastewater treatment is discussed. [ABSTRACT FROM AUTHOR]

Emerging contaminants (ECs) in wastewater have recently attracted the attention of researchers as they pose significant risks to human health and wildlife. This paper presents the state-of-art technologies used to remove ECs from wastewater through a comprehensive review. It also highlights the challenges faced by existing EC removal technologies in wastewater treatment plants and provides future research directions. Many treatment technologies like biological, chemical, and physical approaches have been advanced for removing various ECs. However, currently, no individual technology can effectively remove ECs, whereas hybrid systems have often been found to be more efficient. A hybrid technique of ozonation accompanied by activated carbon was found significantly effective in removing some ECs, particularly pharmaceuticals and pesticides. Despite the lack of extensive research, nanotechnology may be a promising approach as nanomaterial incorporated technologies have shown potential in removing different contaminants from wastewater. Nevertheless, most existing technologies are highly energy and resource-intensive as well as costly to maintain and operate. Besides, most proposed advanced treatment technologies are yet to be evaluated for large-scale practicality. Complemented with techno-economic feasibility studies of the treatment techniques, comprehensive research and development are therefore necessary to achieve a full and effective removal of ECs by wastewater treatment plants. [Display omitted] • Emerging contaminants (EC) pose significant risks to public health and wildlife. • Different treatment techniques of EC in wastewater have been reviewed. • Hybrid systems have often been found to be more successful at EC removal. • Challenges of EC and direction of further research have been presented. [ABSTRACT FROM AUTHOR]

The corrosiveness of biodiesel affects the fuel processing infrastructure and different parts of an internal combustion (IC) engine. The present study investigates the corrosion behaviour of automotive materials such as stainless steel, aluminium, cast iron, and copper in 20% (B20) and 30% (B30) by volume second-generation Jatropha biodiesel using an immersion test. The results were compared with petro-diesel (B0). Various fuel properties such as the viscosity, density, water content, total acid number (TAN), and oxidation stability were investigated after the immersion test using ASTM D341, ASTM D975, ASTM D445, and ASTM D6751 standards. The morphology of the corroded materials was investigated using optical microscopy and scanning electron microscopy SEM), whereas the elemental analysis was carried out using energy-dispersive X-ray spectroscopy (EDS). The highest corrosion using biodiesel was detected in copper, while the lowest was detected in stainless steel. Using B20, the rate of corrosion in copper and stainless steel was 17% and 14% higher than when using diesel, which further increased to 206% and 86% using B30. After the immersion test, the viscosity, water content, and TAN of biodiesel were increased markedly compared to petro-diesel. [ABSTRACT FROM AUTHOR]

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is continuously evolving and four variants of concern have been identified so far, including Alpha, Beta, Gamma and Delta variants. Here we review the indirect effect of preventive measures such as the implementation of lockdowns, mandatory face masks, and vaccination programs, to control the spread of the different variants of this infectious virus on the environment. We found that all these measures have a considerable environmental impact, notably on waste generation and air pollution. Waste generation is increased due to the implementation of all these preventive measures. While lockdowns decrease air pollution, unsustainable management of face mask waste and temperature-controlled supply chains of vaccination potentially increases air pollution. [ABSTRACT FROM AUTHOR]

The majority of research in the carbon-based nanomaterials (CNMs) field has concentrated on the classification and synthesis of CNMs, with relatively few studies focusing on CNMs' roles in photocatalytic hydrogen production. CNMs have proven their potential as an effective addition to the appeal of photocatalytic hydrogen evolution because of their superior chemical and physical properties. This paper explores the recent advancements in photocatalytic hydrogen (H 2) production utilizing CNMs. As evidenced in the literature, carbon quantum dot (CQD)-sensitized titanium dioxide (TiO 2) can demonstrate to have a photocatalytic hydrogen generation activity of 472 mol g−1 h−1 and 1458 mol g−1 h−1 without and with loading metal co-catalyst (Pt). The optimum catalyst, 0.4 CQD/CdS, contributes to the highest H 2 production rate of 309 mmol g−1 h−1 (apparent quantum yield of 32.6%), which is 1.5 times greater than that of bare CdS. This would significantly accelerate the hydrogen production process. There are still challenges to reaching maximum photocatalytic hydrogen production, including low hydrogen storage. The overall price of hydrogen produced via photocatalysis is also higher because of the energy needed to store the hydrogen. Even though the problem is not directly related to the usage of CNMs, this restriction generates uncertainty and limits commercial investment. Given the rising demand for energy and the trend toward green power, it is recommended that extensive industrial uses of photocatalytic hydrogen produced by employing CNMs be investigated for better and more sustainable energy frameworks. • Recent advances in photocatalytic H 2 production are investigated utilizing CNMs. • The optimum catalyst, 0.4 CQD/CdS can produce the highest H 2 at 309 mmol g−1 h−1. • CQD-sensitized TiO 2 can generate 1458 mol g−1 h−1 photocatalytic hydrogen with Pt. • Photocatalytic H 2 production using CNMs should be investigated for industrial use. [ABSTRACT FROM AUTHOR]

There is actually an intense research in ethanol dry reforming because bioethanol and carbon dioxide, a greenhouse gas, can be converted into syngas and, in turn, into chemicals and energy such as dihydrogen (H2). Here we review dry reforming of ethanol with focus on thermodynamics, catalysts and effect of operating conditions. Noble metal-based catalysts typically exhibit both ethanol and CO2 conversions above 85% in the range of 923‒1073 K, yet the high cost of precious metals has restrained their potential applications. H2 yield of 90% and above is achieved at 1073 K or above due to the endothermic nature of ethanol dry reforming. Improving catalytic performance and inhibiting coke formation may be achieved by using bimetallic catalysts and other types of metal oxides. [ABSTRACT FROM AUTHOR]

Microalgae are photosynthetic cell factories of global interest for fuels, food, feed, bioproducts, carbon sequestration, waste mitigation, and environmental remediation. Actually, microalgal monocultures are used for biomass production and pollutant removal, yet are limited by moderate production and contaminations. Here we review binary cultures of autotrophic microalgae with bacteria, yeast, fungi, and heterotrophic microalgae, with focus on growth, lipid accumulation, bioremediation, wastewater treatment, and cost-effective harvesting. We found that a controlled, symbiotic binary culture facilitates waste bioremediation and biomass harvesting, with 96% efficiency, and reduces cost by 20–30%. Noteworthy, in binary or polyculture systems, autotrophic microalgae often develop a symbiosis by exchanging nutrients and metabolites with heterotrophic microalgae, bacteria, yeast, fungi, which may help to achieve higher biomass production. [ABSTRACT FROM AUTHOR]

The application of waste oils as pyrolysis feedstocks to produce high-grade biofuels is receiving extensive attention, which will diversify energy supplies and address environmental challenges caused by waste oils treatment and fossil fuel combustion. Waste oils are the optimal raw materials to produce biofuels due to their high hydrogen and volatile matter content. However, traditional disposal methods such as gasification, transesterification, hydrotreating, solvent extraction, and membrane technology are difficult to achieve satisfactory effects owing to shortcomings like enormous energy demand, long process time, high operational cost, and hazardous material pollution. The usage of clean and safe pyrolysis technology can break through the current predicament. The bio-oil produced by the conventional pyrolysis of waste oils has a high yield and HHV with great potential to replace fossil fuel, but contains a high acid value of about 120 mg KOH/g. Nevertheless, the application of CaO and NaOH can significantly decrease the acid value of bio-oil to close to zero. Additionally, the addition of coexisting bifunctional catalyst, SBA-15@MgO@Zn in particular, can simultaneously reduce the acid value and positively influence the yield and quality of bio-oil. Moreover, co-pyrolysis with plastic waste can effectively save energy and time, and improve bio-oil yield and quality. Consequently, this paper presents a critical and comprehensive review of the production of biofuels using conventional and advanced pyrolysis of waste oils. [Display omitted] • The advance in the pyrolysis of waste oils is discussed in detail. • Waste oils are excellent materials for the production of biofuels. • Plastic wastes are the optimal co-feedstocks for the pyrolysis with waste oils. • SBA-15@MgO@Zn is the best catalyst for the pyrolysis of waste cooking oil. • Catalytic co-pyrolysis of hazardous waste oils is economical and feasible. [ABSTRACT FROM AUTHOR]

[Display omitted] • Continuous algae growth could be achieved by MPR using sludge centrate. • Nutrient loading had indiscernible impact on biomass growth. • Nutrient removal efficiency increased as nutrient loading rate decreased. • Nutrient removal efficiency increased as HRT increased. • Backwashing completely restored water flux decline caused by microalgae deposition. This study aims to evaluate the performance of C. vulgaris microalgae to simultaneously recover nutrients from sludge centrate and produce biomass in a membrane photobioreactor (MPR). Microalgae growth and nutrient removal were evaluated at two different nutrient loading rates (sludge centrate). The results show that C. vulgaris microalgae could thrive in sludge centrate. Nutrient loading has an indiscernible impact on biomass growth and a notable impact on nutrient removal efficiency. Nutrient removal increased as the nutrient loading rate decreased and hydraulic retention time increased. There was no membrane fouling observed in the MPR and the membrane water flux was fully restored by backwashing using only water. However, the membrane permeability varies with the hydraulic retention time (HRT) and biomass concentration in the reactor. Longer HRT offers higher permeability. Therefore, it is recommended to operate the MPR system in lower HRT to improve the membrane resistance and energy consumption. [ABSTRACT FROM AUTHOR]

Globally, 150–170 billion cubic metres of gas are being flared annually from petroleum refineries, petrochemical industries and from landfills. In this paper, we critically review the flaring technology, the impact of flare gas on the environment, and recovery options. We also discuss flare gas challenges such as technical, structural, economic, and regulatory challenges. We found that ground flaring is preferred whenever the facility is situated in a highly populated area or close to an aviation zone. Gas flaring produces major pollutants including benzene, benzopyrene and toluene. The recovery of this gas should be intensified to minimise impacts. [ABSTRACT FROM AUTHOR]

• Seaweed, a marine biomass, identified as an underutilized renewable resource with potential for biofuel. • Seaweed conversion demonstrated to aid carbon sequestration, nutrient recycling, and waste management. • Marine biomass utilization seen as promising yet intricate pathway to global sustainability. • Future research proposed to involve rigorous feasibility analysis and interdisciplinary collaboration. Amid the global energy crisis and environmental concerns, marine biomass, specifically seaweed, serves as a type of marine biomass with potential for conversion into sustainable energy in alignment with the United Nations Sustainable Development Goals (UN SDGs). There is a pressing need to shift towards sustainable energy resources, and seaweed emerges as an underexplored renewable energy source. A thorough analysis of past, current, and emerging trends in seaweed biomass conversion takes place. Thermochemical processes and other conversion methods are detailed, evaluating their efficiencies, limitations, and advancements. Due to its rapid growth and rich carbohydrate content, seaweed proves to be a prime candidate for bioenergy production. Converting seaweed aids in carbon capture, nutrient recycling, and waste management, which positively impacts several UN SDGs. Challenges, including technological barriers, economic feasibility, and environmental concerns related to large-scale seaweed farming and energy conversion, are present. The potential of marine biomass, especially seaweed, in sustainable energy production becomes evident, highlighting its intricate nature. Advancements in conversion technologies, thorough life-cycle assessments, and stringent sustainability protocols are recommended. Future efforts should concentrate on in-depth feasibility studies and foster inter-disciplinary collaborations to address the multifaceted challenges of this energy transition, aligning it with the UN's sustainability aspirations. [ABSTRACT FROM AUTHOR]

• Implications for efficient pyrolysis processes using municipal green waste. • Potential for increased process economics and sustainability. • Optimal parameters boost bio-oil yield (52.8%) and energy efficiency (72.9%). • Holding time enhances bio-oil and syngas yields, while decreases biochar yields. • Smaller feedstock particle size leads to higher energy and exergy efficiency. This study aims to determine how different operating conditions for a fast pyrolysis process employing municipal green waste (MGW) in an auger reactor affect product yields, overall energy efficiency, and total exergy efficiency. In this study, a range of pyrolysis conditions, including temperatures from 400 to 600 °C (in 50 °C increments), holding times from 1 to 5 min (in 1-minute increments), and feedstock particle sizes from 2 to 10 mm (in 2-mm increments) were used. MGW and pyrolysis products were characterised using separate pieces of equipment and in accordance with applicable ASTM standards. The results demonstrate that a yield of 52.8% for bio-oil and a yield of 23.7% for syngas can be achieved at temperatures of 500 and 600 °C, respectively. At 400 °C, the biochar production was highest as 21.5%. Bio-oil and syngas yields improved with holding times, whereas biochar yields declined. At a feedstock particle size of 2 mm, the overall energy efficiency was at its maximum (72.9%), while the total exergy efficiency was also at its highest (68.4%). As feedstock particle size increased, overall energy efficiency and total exergy efficiency dropped. In conclusion, this study provides valuable insights into the effects of different operating parameters on the pyrolysis process using MGW, which can be used to optimize the process and increase its efficiency. [ABSTRACT FROM AUTHOR]

Discharging microplastics into the environment with treated wastewater is becoming a major concern around the world. Wastewater treatment plants (WWTPs) release microplastics into terrestrial and aquatic habitats, mostly from textile, laundry, and cosmetic industries. Despite extensive research on microplastics in the environment, their removal, and WWTP management strategies, highlighting their environmental effects, little is known about microplastics' fate and behaviour during various treatment processes. Microplastics interact with treatment technologies differently due to their diverse physical and chemical characteristics, resulting in varying removal efficiency. Microplastics removed from WWTPs may accumulate in soil and harm terrestrial ecosystems. Few studies have examined the cost, energy use, and trade-offs of large-scale implementation of modern treatment methods for the removal of microplastics. To safeguard aquatic and terrestrial habitats from microplastics' contamination, focused and efficient management techniques must bridge these knowledge gaps. This review summarizes microplastic detection, collection, removal and management strategies. A compilation of treatment process studies on microplastics' removal efficiency and their destiny and transit paths shows recent improvement. Bioremediation, membrane bioreactor (MBR), electrocoagulation, sol-gel technique, flotation, enhanced filtering, and AOPs are evaluated for microplastic removal. The fate and behaviour of microplastics in WWTPs suggest they may be secondary suppliers of microplastics to receiving ecosystems. Innovative microplastic removal strategies and technologies such as nanoparticles, microorganism-based remediation, and tertiary treatment raise issues. These new WWTP technologies are examined for feasibility, limitations, and implementation issues. Pretreatment modifies microplastic size, adsorption potential, and surface morphology to remove microplastics from WWTPs. Membrane bioreactors (MBR) can remove 99.9% of microplastics more efficiently than other approaches. MBR systems require membrane cleaning and fouling control, which raises operational and capital costs. To reduce MPs, plastic alternatives and strict controls, including microplastic waste transformation, should be prioritized. Microplastics must be controlled through monitoring policy execution and awareness. [Display omitted] • Discharging microplastics (MPs) via industrial wastewater is a pressing global issue. • MPs harm soil and ecosystems requiring a search for effective removal technologies. • Membrane bioreactor (MBR) showed effectiveness in removing more than 99.9 % of MPs. • Despite being expensive, bioremediation is demonstrated as an effective approach. • Plastic alternatives and stringent control approaches should be prioritized. [ABSTRACT FROM AUTHOR]

Increasing population and urbanization call for smarter cities where the cycles of matter and energy are optimized, notably in buildings which are actually a source of pollution consuming a lot of energy. The efficiency of building energy has been improved by modelling earth-air heat exchangers, yet selecting the suitable models is challenging. Here we review data-driven earth-air heat exchanger models used for buildings. We discuss issues brought about by assumptions, unmeasured disruptions, and uncertainties in numerical and experimental works. We found that high accuracy can be reached if sufficient data is available. Models are appropriate for real-time activity due to their structure simplicity, yet they display a poor generalization capacity. Model development is limited by the constrained parameters and the complex boundary conditions of the heat exchangers. [ABSTRACT FROM AUTHOR]

Nanoparticles are the magic bullets and at the leading edge in the field of nanotechnology, and their unique properties make these materials indispensable and superior in many areas, including the electronic field. Extensive applications of nanomaterials are incontrovertibly entering our living system. The increasing use of nanomaterials into the ecosystem is one of the crucial environmental factors that human being is facing. Nanomaterials raise noticeable toxicological concerns; particularly their accumulation in plants and the resultant toxicity may affect the food chain. Here, we analyzed the characterization of nanomaterials, such as graphene, Al2O3, TiO2, and semi‐insulating or conducting nanoparticles. Quantitative evaluation of the nanomaterials was conducted and their commercialization aspects were discussed. Various characterization techniques, scanning electron microscopy, X‐ray diffraction, and ultraviolet rays were utilized to identify the morphology, phase, absorbance, and crystallinity. In addition, we analyzed the effects of nanomaterials on plants. The toxicity of nanoparticles has severe effects on loss of morphology of the plants. Potential mechanisms including physical and physiological effects were analyzed. In future studies, it is indispensable to assess widely accepted toxicity evaluation for safe production and use of nanomaterials. [ABSTRACT FROM AUTHOR]

Global energy sources are being transformed from hydrocarbon-based energy sources to renewable and carbon-free energy sources such as wind, solar and hydrogen. The biggest challenge with hydrogen as a renewable energy carrier is the storage and delivery system's complexity. Therefore, other media such as ammonia for indirect storage are now being considered. Research has shown that at reasonable pressures, ammonia is easily contained as a liquid. In this form, energy density is approximately half of that of gasoline and ten times more than batteries. Ammonia can provide effective storage of renewable energy through its existing storage and distribution network. In this article, we aimed to analyse the previous studies and the current research on the preparation of ammonia as a next-generation renewable energy carrier. The study focuses on technical advances emerging in ammonia synthesis technologies, such as photocatalysis, electrocatalysis and plasmacatalysis. Ammonia is now also strongly regarded as fuel in the transport, industrial and power sectors and is relatively more versatile in reducing CO2 emissions. Therefore, the utilisation of ammonia as a renewable energy carrier plays a significant role in reducing GHG emissions. Finally, the simplicity of ammonia processing, transport and use makes it an appealing choice for the link between the development of renewable energy and demand. [ABSTRACT FROM AUTHOR]

The purpose of the current study is to identify the potential of energy-efficient hydrogen (H 2) production from date seeds as biomass via steam gasification process along with heat integration in Gulf countries. A reaction kinetics model has been established for steam gasification with in-situ carbon dioxide (CO 2) capture of date seeds using MATLAB software. The kinetics of reactions involved in the gasification process was calculated using the optimization parameters fitting approach. The heat integration model has been developed via mixed integer nonlinear programming (MINLP) in MATLAB. In the parametric study, temperature and steam/biomass ratio considered their impact on syngas composition and energy recovery. Results showed that both variables have a strong positive effect on H 2 production and depicted maximum production of 68 mol% at a temperature of 750 °C with steam/biomass ratio of 1.2. Methane (CH 4) and CO 2 production were low in the product gas, which showed the activity of water gas shift reaction, methanation reaction, and carbonation reaction. Utilization of waste heat via process heat integration within the system reduced system's external heat load. More than 70% of energy recovered, which could be utilized for gasification and steam production. Energy analysis and process heat integration proved a prospective approach for energy-efficient and sustainable hydrogen production from date seeds. [Display omitted] • Reaction kinetic model developed for the steam gasification of date seeds. • Kinetics of reactions calculated using parameters fitting approach. • Heat integration model developed via mixed-integer non-linear programming. • Energy analysis and process heat integration carried out for the heat recovery. [ABSTRACT FROM AUTHOR]

Biodiesel is an alternative to fossil fuels for diesel engines, yet actual biofuel properties need to be tuned to comply with fuel standards. In particular, fuel stability is required for efficiency and commercial use. Fuel stability varies with the nature and proportion of chemical functional groups of biodiesel. Optimum oxidation stability is required because degradation by oxidation gives products that compromise fuel properties and impair fuel quality and engine performance. For instance, oxidation induces the formation of short-chain corrosive acids and deposits. Here, we review techniques to improve the oxidation stability of biodiesel. For instance, stability is improved by additives such as antioxidants. Factors influencing oxidation stability include composition of fatty acids, acid content, peroxide content, iodine content, viscosity, insoluble impurities, external conditions, and storage material. Antioxidants reduce lipid peroxidation at the beginning of the chain reaction and increase the onset temperatures. [ABSTRACT FROM AUTHOR]

[Display omitted] • Rice bran biodiesel is produced using ultrasound and infrared radiation. • ANN-GWO is a reliable tool to optimize the transesterification process. • The predicted rice bran yield is 98.16%. • The optimum yield obtained from the experiment is 97.74%. • The FAME content of the optimized biodiesel is 95%. A system combining ultrasound and infrared radiation was used to increase the chemical reactions between incompressible reactants by enhancing their mass transfers with the aim to reduce the energy usage and reaction time. In this study, biodiesel from RBO was produced via transesterification, and the process variables were optimized using the combination of ANN and GWO algorithm. Process parameters considered in this study are ratio of methanol to oil, catalyst concentration, and reaction time. Based on the ANN-GWO algoritm used, the optimum conditions for the process parameters were (1) methanol to oil ratio: 60%, (2) concentration of catalyst: 1 wt%, (3) time: 7.76 min, leading to the metyl ester yield of 98.16 wt%. The algoritm was verified by conducting a triplicate independent experiments using the suggested optimum values, resulting in an average methyl ester yield of 97.74 wt%. Subsequently, properties of rice bran biodiesel were compared to ASTM D6751 and EN 14214 standards, and the obtained values met both the standards. [ABSTRACT FROM AUTHOR]

The rapid increase in the global population and its ever-rising standards of living are imposing a huge burden on global resources. Apart from the rising energy needs, the demand for freshwater is correspondingly increasing. A population of around 3.8 billion people will face water scarcity by 2030, as per the reports of the World Water Council. This may be due to global climate change and the deficiency in the treatment of wastewater. Conventional wastewater treatment technologies fail to completely remove several emerging contaminants, especially those containing pharmaceutical compounds. Hence, leading to an increase in the concentration of harmful chemicals in the human food chain and the proliferation of several diseases. MXenes are transition metal carbide/nitride ceramics that primarily structure the leading 2D material group. MXenes act as novel nanomaterials for wastewater treatment due to their high surface area, excellent adsorption properties, and unique physicochemical properties, such as high electrical conductivity and hydrophilicity. MXenes are highly hydrophilic and covered with active functional groups (i.e., hydroxyl, oxygen, fluorine, etc.), which makes them efficient adsorbents for a wide range of species and promising candidates for environmental remediation and water treatment. This work concludes that the scaling up process of MXene-based materials for water treatment is currently of high cost. The up-to-date applications are still limited because MXenes are currently produced mainly in the laboratory with limited yield. It is recommended to direct research efforts towards lower synthesis cost procedures coupled with the use of more environmentally friendly materials to avoid secondary contamination. [Display omitted] [ABSTRACT FROM AUTHOR]

Corn stover (CS) is one of the most abundant agricultural wastes and is ubiquitous around the world that is left over after grain harvest and accounts for 47–50% dry mass of the total grain yield. The global CS yield is 1661.25 million tons/year, which is 27.2% of the total agricultural waste. CS consists of about 34.5% stems, 32.3% leaves, 14.3% husks, 12.3% cobs and 6.6% flowers, with up to 45% cellulose, 30% hemicellulose and 20% lignin. Due to its favorable economic and environmental potential, CS is considered an ideal raw material for producing biofuels and biobased chemicals, which can largely be divided into carbohydrate and lignin platforms. However, the techno-economic perspectives of CS-based biorefineries have remained questionable due to the inadequate supply chain logistics, lack of cost-effective conversion technologies, limited scale-up of the product-specific technologies, and lower competitiveness in the market compared to their counterparts, such as sugar and starch-based biorefineries. While CS is converted by thermochemical and biochemical approaches, the latter is considered to be more sustainable for its selective conversion under mild conditions using microorganisms. This review aimed to critically discuss the latest research and developments on the biochemical conversion of CS into biofuels and chemicals. In particular, this paper covers the market potential of biofuels and chemicals to which CS can make a significant contribution, technological developments in the microbial conversion of CS, major biofuels and chemicals produced from CS-derived carbohydrates and lignin, and the technoeconomic perspectives of CS-based biorefinery. [ABSTRACT FROM AUTHOR]

[Display omitted] • Thermal degradation behavior, kinetic and thermodynamic analyses of surface fibers of date palm. • Kinetic analysis was performed on the devolatilization region using the Coats–Redfern model–fitting method. • Surface fibers pyrolysis governed by two diffusion models: one–way transport and Valensi equation. • E a and A were estimated to be 91.40 kJ/mol and 1.59 × 103 –29.39 × 103 min−1, respectively. The potential of the least-exploited date pam waste was presented as feedstock for bio-oil production. The surface fibers of the date palm are widely available as waste material in the Gulf region, the Middle East, and Africa. Chemical composition analysis and physiochemical characterization showed that surface fibers are valuable feedstock for energy production. Surface fibers were analyzed thermogravimetrically at different heating rates (10, 20, and 30 °C /min) in an inert atmosphere. Decomposition was carried out in three stages: dehydration, devolatilization, and solid combustion. Kinetic analysis was performed on the devolatilization region using the Coats–Redfern model–fitting method using twenty–one reaction mechanisms from four different solid-state reaction mechanisms. Two diffusion models: one–way transport (g(x) = α2) and Valensi equation (g(x) = α+(1-α) × ln(1-α)) showed the highest regression coefficient (R2) with the experimental data. The activation energy (E a) and the pre-exponential factor (A) was estimated to be 91.40 kJ/mol and 1.59 × 103 –29.39 × 103 min−1, respectively. The kinetic parameters were found to be dependent on the heating rate. The surface fibers' thermodynamic parameters ΔH, ΔG, and ΔS were 80–97, 151–164, and −0.17- −0.18 kJ/mol, respectively. This indicates that the pyrolysis of surface fibers is endothermal and not spontaneous. Since there is not much experimental work on the pyrolysis of surface fibers available in the literature, the reported results are crucial for designing the pyrolysis process. [ABSTRACT FROM AUTHOR]

Increasing human population, deforestation and man-made climate change are likely to exacerbate the negative effects on freshwater ecosystems and species endangerment. Consequently, the biodiversity of freshwater continues to dwindle at an alarming rate. However, this particular topic lacks sufficient attention from conservation ecologists and policymakers, resulting in a dearth of data and comprehensive reviews on freshwater biodiversity, specifically. Despite the widespread awareness of risks to freshwater biodiversity, organized action to reverse this decline has been lacking. This study reviews prospective conservation and management strategies for freshwater biodiversity and their associated challenges, identifying current key threats to freshwater biodiversity. Engineered nanomaterials pose a significant threat to aquatic species, and will make controlling health risks to freshwater biodiversity increasingly challenging in the future. When fish are exposed to nanoparticles, the surface area of their respiratory and ion transport systems can decline to 60% of their total surface area, posing serious health risks. Also, about 50% of freshwater fish species are threatened by climate change, globally. Freshwater biodiversity that is heavily reliant on calcium perishes when the calcium content of their environments degrades, posing another severe threat to world biodiversity. To improve biodiversity, variables such as species diversity, population and water quality, and habitat are essential components that must be monitored continuously. Existing research on freshwater biota and ecosystems is still lacking. Therefore, data collection and the establishment of specialized policies for the conservation of freshwater biodiversity should be prioritized. • Key threats and impacts of climate change on freshwater biodiversity have been reviewed. • Potential conservation and management strategies for freshwater biodiversity are highlighted. • Engineered nanomaterials pose a serious threat to aquatic species. • Climate change threatens around 50% of all freshwater fish species worldwide. • Species variety, population, and water quality must be regularly monitored to improve biodiversity. [ABSTRACT FROM AUTHOR]

Membrane technology has rapidly gained popularity in wastewater treatment due to its cost-effectiveness, environmentally friendly tools, and elevated productivity. Although membrane performance in wastewater treatment has been reviewed in several past studies, the key techniques for improving membrane performance, as well as their challenges, and solutions associated with the membrane process, were not sufficiently highlighted in those studies. Also, very few studies have addressed hybrid techniques to improve membrane performance. The present review aims to fill those gaps and achieve public health benefits through safe water processing. Despite its higher cost, membrane performance can result in a 36% reduction in flux degradation. The issue with fouling has been identified as one of the key challenges of membrane technology. Chemical cleaning is quite effective in removing accumulated foulant. Fouling mitigation techniques have also been shown to have a positive effect on membrane photobioreactors that handle wastewater effluent, resulting in a 50% and 60% reduction in fouling rates for backwash and nitrogen bubble scouring techniques. Membrane hybrid approaches such as hybrid forward-reverse osmosis show promise in removing high concentrations of phosphorus, ammonium, and salt from wastewater. The incorporation of the forward osmosis process can reject 99% of phosphorus and 97% of ammonium, and the reverse osmosis approach can achieve a 99% salt rejection rate. The control strategies for membrane fouling have not been successfully optimized yet and more research is needed to achieve a realistic, long-term direct membrane filtering operation. [Display omitted] • Strategies to improve membrane performance in wastewater treatment are reviewed. • Despite its increased cost, membrane performance can reduce flow degradation by 36%. • The fouling issue is identified as one of the key issues of membrane technology. • Mitigation techniques like nitrogen bubble scouring can reduce fouling rates by 60%. [ABSTRACT FROM AUTHOR]

Anaerobic digestion (AD) is a viable technique to address food waste (FW) problems by converting FW into sustainable energy. Despite the advantages of the AD process, large-scale AD plants like in Germany and the USA have not been developed in Australia. Therefore, this paper aims to study the technological, economic, and environmental feasibility of sustainable energy production from household FW in Australia. In addition, this paper discusses the different waste to energy (WtE) technologies along with the operational parameters as well as the challenges in developing a biogas plant. The energy and economic potential analysis of the AD process indicates that the processing of 10% FW from Australian states and territories can generate 1.22 GWh to 35.4 GWh electricity which can subsequently earn AUD 0.54 million to AUD 15.7 million revenue per year. The greenhouse gas (GHG) emissions analysis indicates that conversion of the 10% of Australian FW has the potential to lower GHG emissions by 639,852 tonnes per annum. Hence, it can be said that FW plays a vital role as a promising source of sustainable energy and is capable of benefiting the country's economy significantly and reducing GHG emissions. • FW is a potential source of sustainable energy. • AD is a useful waste to energy process for producing clean energy. • Conversion of FW into energy can significantly lower GHG emissions. [ABSTRACT FROM AUTHOR]

[Display omitted] • Importance of microbial biotechnology for waste utilization is reviewed. • Utilization of microbes for lignocelluloses utilization and value-addition are discussed. • Importance and possibilities for microbial degradation of plastics are elaborated. • Role of microbes in global warming is demonstrated. This review provides an update on the state-of-the art technologies for the valorization of solid waste and its mechanism to generate various bio-products. The organic content of these wastes can be easily utilized by the microbes and produce value-added compounds. Microbial fermentation techniques can be utilized for developing waste biorefinery processes. The utilization of lignocellulosic and plastics wastes for the generation of carbon sources for microbial utilization after pre-processing steps will make the process a multi-product biorefinery. The C1 and C2 gases generated from different industries could also be utilized by various microbes, and this will help to control global warming. The review seeks to expand expertise about the potential application through several perspectives, factors influencing remediation, issues, and prospects. [ABSTRACT FROM AUTHOR]

Phase change materials (PCMs) have garnered significant attention as low-cost thermal energy storage systems that efficiently capture and store solar energy. Recent review works have largely focused only on thermal conductivity enhancement techniques, and/or applications of PCMs, while others have mainly discussed the performance enhancement of either heating, cooling, or clean energy storage systems integrating with PCMs. However, not enough studies recently reviewed all of these techniques/systems comprehensively to provide insights into them. This paper thus comprehensively reviews the integration of PCMs as an enhancement to most types of heating, cooling, and clean energy storage system performance, and the techniques to enhance thermal conductivity. The integration of PCMs with these systems has shown promising performance. For instance, an improvement of 13.5% is found in the efficiency of photovoltaic (PV) system when it is integrated with PCM/Al 2 O 3 nanoparticles. In addition, the solar air heater's daily energy efficiency reaches 17% on its own, but when combined with PCM, it reaches 33%. However, the major drawback of using PCM–TES (thermal energy storage) for cooling is that PCM does not entirely solidify at night. The literature also shows that the issues related to PCMs' low thermal conductivity, phase separation, and subcooling/supercooling, their poor compatibility with other materials, and the environmental hazards they pose hinder their application on a large scale. It is necessary to implement international standards for assessing the thermophysical properties of PCMs and compile data to better facilitate the utilization of PCMs by end-users. [ABSTRACT FROM AUTHOR]

[Display omitted] • Cationic PAETAC & PAmPTAC were synthesized by UV-induced radical polymerization. • New polymers showed good flocculation performance of freshwater & marine microalgae. • Optimal doses of PAETAC were 50 and 4.8 mg/g for C. vulgaris & P. purpureum. • PAETAC and PAmPTAC produced stable flocs, supporting simple dewatering step. This study addresses the challenge of microalgae harvesting through the development of flocculants. Two positively charged cationic polymers including poly[2 (acryloyloxy)ethyl]trimethylammonium chloride (PAETAC) and poly(3 acrylamidopropyl)trimethylammonium chloride (PAmPTAC) were synthesized using the UV-induced radical polymerization, for harvesting both freshwater and marine microalgae. The results show that the synthesized polymers have excellent flocculation performance for both freshwater green microalgae (Chlorella vulgaris) and marine red microalgae (Porphyridium purpureum). PAETAC outperformed PAmPTAC for both Chlorella vulgaris and Porphyridium purpureum microalgae. The optimal PAETAC doses for Chlorella vulgaris and Porphyridium purpureum microalgae were 50 and 4.8 mg/g of dry biomass while the optimal PAmPTAC doses were 252 and 35 mg/g of dry biomass respectively. Additionally, the floc formation with the PAETAC was more stable than PAmPTAC, which supported the dewatering step via sieving. The superior performance can be attributed to the higher molecular weight of the PAETAC polymer when compared to the PAmPTAC polymer. In comparison to commercially available polydiallyldimethylammonium chloride (PolyDADMAC), the newly synthesised PAETAC and PAmPTAC polymers demonstrated superior flocculation efficiency at a lower dose. The findings of this study established a platform technology for designing and synthesising cationic flocculants for use in microalgae harvesting. [ABSTRACT FROM AUTHOR]

This study explores the role of renewable energy (RE) penetration in Malaysia's energy security (ES) and its implications for the country's target of 20% capacity in the energy mix by 2025. Renewable energy (RE) is a critical driver of long-term energy security. In 2018, the share of renewable energy in Malaysia's energy mix was 9%, falling far short of the national target of 20% penetration by 2025. This study employs a system dynamics approach to investigate the relationship between RE penetration and correlated indicators from energy security (ES) dimensions: energy availability, environmental sustainability, and socio-economics. The causal relationships between the three-dimensional indicators of ES have been established using causal and stock and flow logic. Simulated results show that energy consumption has increased sharply, while energy efficiency and economic growth have only increased by a small margin with an increase in RE from 2015 to 2020. The energy intensity is expected to rise slightly by the end of the fifth year. As a result, the overall impact is positive for Malaysia's environmental sustainability while reducing its reliance on energy imports and meeting national economic growth demands. • 1. Increase in RE share improves pollution remediation. • 2. RE improves the short and long-term ES of a nation. • 3. Energy intensity, energy efficiency and growth in economic health is noticed. • 4. Reduces dependency on fossil fuels and promotes the use of alternatives such as biofuels. [ABSTRACT FROM AUTHOR]

[Display omitted] • Conversion of toxic and hazardous Zanthoxylum armatum seed into biodiesel. • Catalytic application of green nanoparticles of silver oxide has been discussed. • Use of Central Composite Design for optimization reactions of transesterification. • Characterization of nanoparticles using analytical techniques. The cleaner and sustainable production of biodiesel from toxic and hazardous non-edible seed oils offer a remarkable opportunity to deal with energy crises and provide a renewable substitute to depleting fossil fuels. In the current study, the potential of the novel, toxic and non-edible seed oil of Zanthoxylum armatum was investigated for eco-friendly production of biodiesel catalysed by green nanoparticles of silver oxide. Silver oxide nanoparticles were synthesised with aqueous leaf extract of Silybum marianum. Heterogeneous green nanocatalysts were preferred due to their recyclable nature and easy recovery. The maximum yield of 95% of methyl ester was obtained at optimum reaction conditions of oil to methanol molar ratio 1:7, catalyst loading 0.5 (wt.%), reaction temperature 90 °C and reaction time 2 h. Characterisation of synthesised nanoparticles of silver oxide was carried out with X-Ray diffraction (XRD), scanning electron microscopy (SEM), and energy diffraction X-ray (EDX). Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) confirmed the formation of methyl esters. 5, 8-octadecenoic acid was found to be the major fatty acid methyl ester in the biodiesel sample. Fuel properties of biodiesel were investigated and found comparable to international standards of ASTM D-6571 and EN-14214. It was concluded from the current investigation that Zanthoxylum armatum is a potential biomass feedstock for the sustainable production of biodiesel using green nanoparticles of silver oxide. [ABSTRACT FROM AUTHOR]

• Food waste is a potential source of sustainable gaseous biofuel. • Anaerobic digestion is an efficient technology to convert food waste into fuel. • Turning food waste into energy can assist the decarbonisation of the economy. • Converting food waste into sustainable fuel can significantly lower the GHG emission. Food waste is a type of organic waste generated by restaurants, food processing plants, households, and commercial and institutions. This study aims to assess the sustainable biofuel, electricity production and greenhouse gas emission reduction potential of food waste using anaerobic digestion technology. Food waste data was collected from the Australian government database to estimate the biomethane and biogas yield and to evaluate the opportunities to convert the biomethane into electricity and heat. This study found that food waste can yield 47% biomethane and hence for Australia, an estimated total of 0.07 million m3 to 1.54 million m3 of biogas can be produced and up to 414,898 tonnes of greenhouse gas emissions reduced annually. The study also estimated that the generated biogas can replace fossil fuel-based electricity generation of up to 52.36 GW and 554.4 TJ heat per year. The environmental assessment indicated that the complete conversion of food waste can lower greenhouse gas emissions (GHG) by up to 5,07,434 tonnes per year and Australia can earn about $52.38 M revenue from electricity production. Therefore, conversion of food waste into biofuel through the anaerobic digestion process can play a significant role in generating electricity from non-fossil-based sources, reducing GHG emissions and earning revenue. [ABSTRACT FROM AUTHOR]

The utilization of renewable lignocellulosic biomasses for bioenergy synthesis is believed to facilitate competitive commercialization and realize affordable clean energy sources in the future. Among the pathways for biomass pretreatment methods that enhance the efficiency of the whole biofuel production process, the combined microwave irradiation and physicochemical approach is found to provide many economic and environmental benefits. Several studies on microwave-based pretreatment technologies for biomass conversion have been conducted in recent years. Although some reviews are available, most did not comprehensively analyze microwave–physicochemical pretreatment techniques for biomass conversion. The study of these techniques is crucial for sustainable biofuel generation. Therefore, the biomass pretreatment process that combines the physicochemical method with microwave-assisted irradiation is reviewed in this paper. The effects of this pretreatment process on lignocellulosic structure and the ratio of achieved components were also discussed in detail. Pretreatment processes for biomass conversion were substantially affected by temperature, irradiation time, initial feedstock components, catalyst loading, and microwave power. Consequently, neoteric technologies utilizing high efficiency-based green and sustainable solutions should receive further focus. In addition, methodologies for quantifying and evaluating effects and relevant trade-offs should be develop to facilitate the take-off of the biofuel industry with clean and sustainable goals. • Fundamental and characteristic of microwave assisted pretreatment were introduced. • Effects of microwave irradiation on the lignocellulosic biomass reviewed. • Combination of microwave physicochemical methods obtained higher efficiency. • Energy and economic aspects of microwave-physicochemical methods evaluated. [ABSTRACT FROM AUTHOR]

• High dependency on fossil fuel as main energy source brings excessive CO 2 emission. • CO 2 and CH 4 utilization is one of the solutions to mitigate climate change. • Alternative energy technology has potential in meeting the increasing energy demand. • Four main technologies that used to mitigateclimate change is reviewed. • Their mechanism, limitations, and suggestions for up-scaling purpose are highlighted. The excessive global emission of greenhouse gases (mainly carbon dioxide, CO 2 and methane, CH 4), especially due to the burning of fossil fuel for energy and power generation, is the main cause to the air pollution and greenhouse effect. This has eventually brought many issues, such as climate change and global warming, that will affect the standard life of human beings. Many strategies have been proposed to further reduce the excessive emission of greenhouse gases, including CO 2 and CH 4 utilization. This method not only reduce the CO 2 concentration in the atmosphere, but also producing renewable energy (syngas) at the same time. Hence, CO 2 and CH 4 utilization is also a promising approach to assist in overcoming the energy crisis due to the increasing population in time. Basically, the utilization of CO 2 and CH 4 system can be categorized into four: (i) electrochemical reduction, (ii) advanced catalyst system, (iii) photocatalytic reduction, and (iv) plasma technology. In this review paper, the mechanism implemented on the four abovementioned categories and their respective limitations are presented. Besides, future recommendations to optimize the greenhouse gases utilization system for up-scaling purpose is also highlighted. [ABSTRACT FROM AUTHOR]

In the present study, a micro combined heat and power (micro-CHP) system using compressed natural gas (CNG) and biogas fuels, was developed. The objective of this research study was to investigate the utilization of nanofluids as a working fluid to improve thermal performance of the micro-CHP system. Three different nanofluids based on the CNT, Al 2 O 3 , and SiO 2 have been investigated. The nanofluids was used as the circulating fluid to recover the heating power from the micro-CHP system. Three different concentration of nanoparticles (25, 50 and 100 ppm) have been used. The efficiency of separated heat and power (SHP) system was 27.6% while using combined heat and power, the total efficiency increased up to 65.3%. The results showed that by using CNG gas thermal efficiency of micro-CHP improve compared to the biogas. The result of the present study showed that nanofluids enhances the thermal efficiency of the micro-CHP system. By using the Al 2 O 3 nanofluid the efficiency of micro-CHP efficiency is 73%. While by using the SiO 2 and CNTs nanofluids the efficiency of micro-CHP efficiency is 70% and 66.3% respectively. So, we can coclude that by using the Al 2 O 3 nanofluid thermal performance of micro-CHP systems improves. [ABSTRACT FROM AUTHOR]

Bioresource valorization to obtain valuable phenolic compounds for medicinal, nutraceutical, food, and cosmetic applications are critical for a current and future sustainable and bio-based economy. Renewable, environmentally friendly, and non-toxic choline chloride-based deep eutectic solvents are the newest and utmost environmentally friendly alternatives to conventional organic solvents for the pretreatment and extraction of phenolic compounds. Recently, numerous studies have focused on phenolic compound extraction using choline chloride-based deep eutectic solvents as solvents or catalysts. Process variable optimization has been reported in terms of kinetic modeling and mechanisms involved in phenolic compounds extraction. This paper describes the cutting-edge methods used to extract phenolic compounds from different bio-based sources using choline chloride-based deep eutectic solvents. In addition, the factors affecting, kinetic models, and mechanisms involved in phenolic compound extraction using choline chloride-based deep eutectic solvents are thoroughly summarized. Moreover, future predictions, challenges, and anticipated growth in this field are addressed and can be used for biomass valorization. • Extraction of phenolic compounds using deep eutectic solvents is promising. • Extraction mechanism depends on the nature of the deep eutectic solvent components. • Scaling up should be optimized using experimental and computational approaches. • Recovery of phenolic compound from solvent is difficult due to low vapor pressure. [ABSTRACT FROM AUTHOR]