Search

Yellow fluorescent proteins (YFPs) are commonly used in biology to track cellular processes, particularly as acceptors in experiments using the Förster Resonant Energy Transfer (FRET) phenomenon. However, their fluorescence intensity is strongly pH-dependent, limiting their utility in acidic environments. Here, we explore the pH sensitivity of YFPs upon binding with an artificial repeat protein (αRep) both in vitro and in living cells. We show that αRep binds to Citrine, with high affinity in the nanomolar range at physiological and acidic pHs, leading to increased thermal stability of the complex. Moreover, αRep binding reduces Citrine's pK a by 0.75 pH units, leading to a decreased sensitivity to pH fluctuations. This effect can be generalized to other YFPs as Venus and EYFP in vitro. An efficient binding of αRep to Citrine has also been observed in living cells both at pH 7.4 and pH 6. This interaction leads to reduced variations of Citrine fluorescence intensity in response to pH variations in cells. Overall, the study highlights the potential of αReps as a tool to modulate the pH sensitivity of YFPs, paving the way for future exploration of biological events in acidic environments by FRET in combination with a pH-insensitive cyan donor., (© 2024 The Authors. ChemBioChem published by Wiley-VCH GmbH.)

Red fluorescent protein (RFP)-based fluorescent probes that can selectively interact with specific nucleic acids are of great importance for therapeutic and bioimaging applications. Herein, we have reported the synthesis of RFP chromophores for selective recognition of G-quadruplex nucleic acids in vitro and ex vivo. We identified DFHBI-DM as a fluorescent turn-on probe that binds to the dimeric NG16 parallel quadruplex with superior selectivity and sensitivity over various parallel, antiparallel, and hybrid topologies. The binding of DFHBI-DM to NG16 exhibited excellent photophysical properties, including high binding affinity, large Stokes shift, high photostability, and quantum yield. The MD simulation study supports the 1:1 binding stoichiometry. It confirms the planar conformation of DFHBI-DM , which makes strong binding interactions with a flat quartet of NG16 compared to other antiparallel and hybrid topologies. The cell imaging and MTT assays revealed that DFHBI-DM is a biocompatible and efficient fluorescent probe for intracellular imaging of NG16. Overall, these results demonstrated that DFHBI-DM could be an effective fluorescent G4-stabilizing agent for the dimeric NG16 parallel quadruplex, and it could be a promising candidate for further exploration of bioimaging and therapeutic applications.

To enhance the photoconversion performance of biphotochromic moxSAASoti protein, a substitution F97 M was introduced. In addition to enhancing the target properties, this substitution also resulted in the crystallization of the recombinant protein within living HeLa cells (also referred to as in cellulo crystallization). The phenomenon of protein crystallization in living cells is not unique, yet the mechanisms and application of in cellulo crystallization remain significant for further research. However, in cellulo crystallization is atypical for fluorescent proteins and detrimental for their biotechnological application. The objective of this study was to elucidate the underlying mechanisms responsible for the crystallization of moxSAASoti F97M in cellulo. For this purpose, the crystal structure of the green form of biphotochromic protein moxSAASoti F97M was determined at high resolution, which surprisingly has a space group, different from those of parent mSAASoti C21N . The analysis provided allowed to propose a mechanism of new crystal contacts formation, which might be a cause of in cellulo protein crystallization., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2024 Elsevier Inc. All rights reserved.)

In 2015, we reported primed conversion, a novel way to convert green-to-red photoconvertible fluorescent proteins, which emerges as a powerful tool for precision optical imaging. Primed conversion uses the intercept of blue and red-to-far-red light instead of traditional violet or near-UV light illumination which offers a series of advantages. Here, we review the fundamental principles and applications of primed conversion with a focus on its use in single-cell labelling and lineage tracing. We provide a historical perspective of lineage tracing techniques, thereby covering basic principles of fluorescence, photoconvertible fluorescent proteins, and eventually primed conversion. We then present the molecular requirements for primed conversion to take place and showcase how it can be used for dual-colour high-fidelity lineage tracing. Further, we discuss potential future developments of the primed conversion imaging toolkit that can benefit the study of both development and disease progression., (© 2023 The Author(s). Journal of Microscopy published by John Wiley & Sons Ltd on behalf of Royal Microscopical Society.)

Branched-chain amino acids (BCAAs) play an important role in the functioning of mammalian cells and the central nervous system. However, available genetically encoded indicators for BCAAs are based on Förster resonance energy transfer and have a limited dynamic range. We developed a single fluorescent protein-based sensor for BCAAs, called NeIle, which is composed of circularly permutated mNeonGreen protein inserted into the leucine-isoleucine-valine binding protein (LIVBP) from Escherichia coli bacteria. In solution, the NeIle indicator displayed a positive fluorescence response to adding isoleucine, leucine, and valin amino acids with high Δ F / F dynamic ranges of 27-, 19-, and 11-fold and the corresponding affinity values of 5.0, 2.9, and 75 mM, respectively. The spectral and biochemical properties of the NeIle indicator were characterized in solution. We characterized the brightness of the NeIle indicator in living mammalian cells, including cultured neurons. Using the NeIle indicator, we successfully visualized the dynamics of isoleucine transients in different organelles of mammalian cells. We obtained and analyzed the X-ray crystal structure of the NeIle indicator in an isoleucine-bound state. Structure-guided directed mutagenesis of the NeIle indicator revealed the basis of its fluorescence response and selectivity to isoleucine.

Although several imaging strategies for dual fluorescence (or Förster) resonance energy transfer (FRET) biosensors have been reported, their implementation is challenging because of the limited performance of fluorescent proteins and the spectral overlap of FRET biosensors. These processes often require additional data calibration to eliminate artifacts. Many CFP/YFP FRET biosensors have been developed. In this study, we introduced the mKate3/HT7(JFX650) FRET pair, which effectively formed two pairs of FRET pairs for dual-FRET imaging when combined with the CFP/YFP FRET pair. The FRET donor mKate3 exhibited higher brightness than its predecessor mKate. The FRET acceptor, HT7(JFX650), is a HaloTag7 protein covalently conjugated with a far-red JFX650-THL ligand. The pair comprising mKate3 and HT7(JFX650) represents an excellent FRET dyad, exhibiting a high FRET efficiency ratio. To use the FRET pair for dual FRET biosensor imaging, we constructed PKA and K + biosensors based on the mKate3/HT7(JFX650) FRET pair. These biosensors can be used along with CFP/YFP biosensors to simultaneously detect the responses of intracellular PKA/Src, PKA/Ca 2+ , and K + /Ca 2+ under different stimuli. The findings revealed that dual FRET biosensors, which are based on the combination of CFP/YFP and mKate3/HT7 (JFX650), exhibit adequate compatibility and can be used to visualize multiple molecular activities in a live cell.

A sustainable operation for harvesting metals in the lanthanide series is needed to meet the rising demand for rare earth elements across diverse global industries. However, existing methods are limited in their capacity for detection and capture at environmentally and industrially relevant lanthanide concentrations. Supercharged fluorescent proteins have solvent-exposed, negatively charged residues that potentially create multiple direct chelation pockets for free lanthanide cations. Here, we demonstrate that negatively supercharged proteins can bind and quantitatively report concentrations of lanthanides via an underutilized lanthanide-to-chromophore pathway of energy transfer. The top-performing sensors detect lanthanides in the micromolar to millimolar range and remain unperturbed by environmentally significant concentrations of competing metals. As a demonstration of the versatility and adaptability of this energy transfer method, we show proximity and signal transmission between the lanthanides and a supramolecular assembly of supercharged proteins, paving the way for the detection of lanthanides via programmable protein oligomers and materials., (© 2024. The Author(s).)

Super-resolved cryogenic correlative light and electron microscopy is a powerful approach which combines the single-molecule specificity and sensitivity of fluorescence imaging with the nanoscale resolution of cryogenic electron tomography. Key to this method is active control over the emissive state of fluorescent labels to ensure sufficient sparsity to localize individual emitters. Recent work has identified fluorescent proteins (FPs) that photoactivate or photoswitch efficiently at cryogenic temperatures, but long on-times due to reduced quantum yield of photobleaching remain a challenge for imaging structures with a high density of localizations. In this work, we explore the photophysical properties of the red photoactivatable FP PAmKate and identify a 2-color process leading to enhanced turn-off of active emitters, improving localization rate. Specifically, after excitation of ground state molecules, we find that a transient state forms with a lifetime of ∼2 ms under cryogenic conditions, which can be bleached by exposure to a second wavelength. We measure the response of the transient state to different wavelengths, demonstrate how this mechanism can be used to improve imaging, and provide a blueprint for the study of other FPs at cryogenic temperatures.

One pot sensor by multiplexing in the array is an attractive system for rapid discrimination of multiple analytes. Multiplexing can be achieved in two ways, i.e., using multiple signal transducers or adding sequential agents to the sensor media. Herein, we have used a combination of both multichannel and sequential ON-OFF strategies for the discrimination of different bioanalytes. The sensor array was constructed by implementing positively charged MoS 2 as a receptor and different fluorescent proteins possessing distinguishable emission profiles as signal transducers. The sensing setup was constructed with the interaction between oppositely charged MoS 2 and the host-guest combination between a cationic headgroup of MoS 2 and Cucurbit [7] uril (CB7) to alter the fluorescence of signal transducers in situ noncovalently. Electrodynamic analysis and optical assays suggest that the electrostatic interaction played a major role in the modulation of the fluorescence outcomes in the array. Both cationic and anionic proteins were discriminated at a 50 nM concentration. The detection limit of the sensor array by using β-gal protein was found to be 1 nM. The sensor array was further implemented for the discrimination of normal and diseased cell lines and lysates, which indicates the versatile detection ability of this reported sensor array.

Finding a unified fluorescence mechanism is essential to develop and utilize fluorescent proteins appropriately. Here, we report the unified role of the 145th residue on the fluorescence efficiency of fluorescent proteins developed from the jellyfish Aequorea victoria by demonstrating the difference and similarity between two representative fluorescent proteins, enhanced green fluorescent protein (eGFP), and enhanced yellow fluorescent protein (eYFP). We determined the fluorescence lifetimes of the 19 different Y145 mutants of eGFP and eYFP by picosecond time-resolved fluorescence spectroscopy. We found that the effect of the 145th mutation on the fluorescence lifetime is significant for eYFP but moderate for eGFP. We compared known crystal structures to clarify the observed difference between eGFP and eYFP. As a result, we conclude that the efficiency of the steric restriction of the chromophore motion by the 145th side chain is essentially the same for both eGFP and eYFP. Meanwhile, the restriction of the chromophore motion by hydrogen bonds is more pronounced for eGFP than for YFP. Balance of the steric effect and hydrogen bonding controls the lifetime of the Y145 mutants for eGFP and eYFP. Furthermore, the steric restriction is induced by the electrostatic effect; the different 145th residue induces a different electrostatic environment around the chromophore. The finding in this study reasonably explains the reported lifetimes of other fluorescent proteins and allows the prediction of the lifetime of unknown fluorescent proteins from jellyfish.

Cell wall peptidoglycan binding domains (CBDs) of cell lytic enzymes, including bacteriocins, autolysins and bacteriophage endolysins, enable highly selective bacterial binding, and thus, have potential as biorecognition molecules for nondestructive bacterial detection. Here, a novel design for a self-complementing split fluorescent protein (FP) complex is proposed, where a multimeric FP chain fused with specific CBDs ((FP-CBD) n ) is assembled inside the cell, to improve sensitivity by enhancing the signal generated upon Staphylococcus aureus or Bacillus anthracis binding. Flow cytometry shows enhanced fluorescence on the cell surface with increasing FP stoichiometry and surface plasmon resonance reveals nanomolar binding affinity to isolated peptidoglycan. The breadth of function of these complexes is demonstrated through the use of CBD modularity and the ability to attach enzymatic detection modalities. Horseradish peroxidase-coupled (FP-CBD) n complexes generate a catalytic amplification, with the degree of amplification increasing as a function of FP length, reaching a limit of detection (LOD) of 10 3 cells/droplet (approximately 0.1 ng S. aureus or B. anthracis) within 15 min on a polystyrene surface. These fusion proteins can be multiplexed for simultaneous detection. Multimeric split FP-CBD fusions enable use as a biorecognition molecule with enhanced signal for use in bacterial biosensing platforms., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

StayGold is an exceptionally bright and stable fluorescent protein that is highly resistant to photobleaching. Despite favorable fluorescence properties, use of StayGold as a fluorescent tag is limited because it forms a natural dimer. Here we report the 1.6 Å structure of StayGold and generate a derivative, mStayGold, that retains the brightness and photostability of the original protein while being fully monomeric., (© 2023. The Author(s).)

Intracellular temperature is a fundamental parameter in biochemical reactions. Genetically encoded fluorescent temperature indicators (GETIs) have been developed to visualize intracellular thermogenesis; however, the temperature sensitivity or localization capability in specific organelles should have been further improved to clearly capture when and where intracellular temperature changes at the subcellular level occur. Here, we developed a new GETI, gMELT, composed of donor and acceptor subunits, in which cyan and yellow fluorescent proteins, respectively, as a Förster resonance energy transfer (FRET) pair were fused with temperature-sensitive domains. The donor and acceptor subunits associated and dissociated in response to temperature changes, altering the FRET efficiency. Consequently, gMELT functioned as a fluorescence ratiometric indicator. Untagged gMELT was expressed in the cytoplasm, whereas versions fused with specific localization signals were targeted to the endoplasmic reticulum (ER) or mitochondria. All gMELT variations enabled more sensitive temperature measurements in cellular compartments than those in previous GETIs. The gMELTs, tagged with ER or mitochondrial targeting sequences, were used to detect thermogenesis in organelles stimulated chemically, a method previously known to induce thermogenesis. The observed temperature changes were comparable to previous reports, assuming that the fluorescence readout changes were exclusively due to temperature variations. Furthermore, we demonstrated how macromolecular crowding influences gMELT fluorescence given that this factor can subtly affect the fluorescence readout. Investigating thermogenesis with gMELT, accounting for factors such as macromolecular crowding, will enhance our understanding of intracellular thermogenesis phenomena.

Genetically-encoded redox biosensors have become invaluable tools for monitoring cellular redox processes with high spatiotemporal resolution, coupling the presence of the redox-active analyte with a change in fluorescence signal that can be easily recorded. This review summarizes the available fluorescence recording methods and presents an in-depth classification of the redox biosensors, organized by the analytes they respond to. In addition to the fluorescent protein-based architectures, this review also describes the recent advances on fluorescent, chemigenetic-based redox biosensors and other emerging chemigenetic strategies. This review examines how these biosensors are designed, the biosensors sensing mechanism, and their practical advantages and disadvantages., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Fluorescent proteins (FPs) are essential tools for advanced microscopy techniques such as super-resolution imaging, single-particle tracking, and quantitative single-molecule counting. Various FPs fused to DNA-binding proteins have been used to observe the subcellular location and movement of specific gene loci in living and fixed bacterial cells. However, quantitative assessments of the properties of FPs for gene locus measurements are still lacking. Here, we assessed various FPs to observe specific gene loci in live and fixed Escherichia coli cells using a fluorescent repressor-operator binding system (FROS), tet operator-Tet repressor proteins (TetR). Tsr-fused FPs were used to assess the intensity and photostability of various FPs (five red FPs: mCherry2, FusionRed, mRFP, mCrimson3, and dKatushka; and seven yellow FPs: SYFP2, Venus, mCitrine, YPet, mClover3, mTopaz, and EYFP) at the single-molecule level in living cells. These FPs were then used for gene locus measurements using FROS. Our results indicate that TetR-mCrimson3 (red) and TetR-EYFP (yellow) had better properties for visualizing gene loci than the other TetR-FPs. Furthermore, fixation procedures affected the clustering of diffusing TetR-FPs and altered the locations of the TetR-FP foci. Fixation with formaldehyde consistently disrupted proper DNA locus observations using TetR-FPs. Notably, the foci measured using TetR-mCrimson3 remained close to their original positions in live cells after glyoxal fixation. This in vivo study provides a cell-imaging guide for the use of FPs for gene-locus observation in E. coli and a scheme for evaluating the use of FPs for other cell-imaging purposes.

The ability of cells to sense and respond to mechanical forces is critical in many physiological and pathological processes. However, determining the mechanisms by which forces affect protein function inside cells remains challenging. Motivated by in vitro demonstrations of fluorescent proteins (FPs) undergoing reversible mechanical switching of fluorescence, we investigated whether force-sensitive changes in FP function could be visualized in cells. Guided by a computational model of FP mechanical switching, we develop a formalism for its detection in Förster resonance energy transfer (FRET)-based biosensors and demonstrate its occurrence in cellulo within a synthetic actin crosslinker and the mechanical linker protein vinculin. We find that in cellulo mechanical switching is reversible and altered by manipulation of cell force generation, external stiffness, and force-sensitive bond dynamics of the biosensor. This work describes a framework for assessing FP mechanical stability and provides a means of probing force-sensitive protein function inside cells., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Antibodies are crucial in various biological applications due to their specific binding to target molecules, altering protein function and structure. The advent of single-chain antibodies such as nanobodies has paved the way for broader applicability in both research and therapies due to their small size and efficient tissue penetration. Recently, several approaches have been reported to optically control the antigen-binding affinity of nanobodies. Here, we show an alternative strategy for creating photo-activatable nanobodies. By fusing the photocleavable protein PhoCl with the N-terminus of the nanobody (named optoNb60), we successfully demonstrated light-dependent restoration of the antigen-binding ability and the following modulation of the activity of a target protein, the beta-2 adrenergic receptor. Moreover, the activation of optoNb60 was monitored by the fluorescence changes upon photoconversion. The compatibility of the uncaging design with the previously reported optogenetic molecules using nanobodies will contribute to the further optimization of the response capabilities of existing optogenetic tools, thereby expanding their applicability.

Red fluorescent protein (RFP) variants are highly sought after for in vivo imaging since longer wavelengths improve depth and contrast in fluorescence imaging. However, the lower energy emission wavelength usually correlates with a lower fluorescent quantum yield compared to their green emitting counterparts. To guide the rational design of bright variants, we have theoretically assessed two variants (mScarlet and mRouge) which are reported to have very different brightness. Using an α-CASSCF QM/MM framework (chromophore and all protein residues within 6 Å of it in the QM region, for a total of more than 450 QM atoms), we identify key points on the ground and first excited state potential energy surfaces. The brighter variant mScarlet has a rigid scaffold, and the chromophore stays largely planar on the ground state. The dimmer variant mRouge shows more flexibility and can accommodate a pretwisted chromophore conformation which provides easier access to conical intersections. The main difference between the variants lies in the intersection seam regions, which appear largely inaccessible in mScarlet but partially accessible in mRouge. This observation is mainly related with changes in the cavity charge distribution, the hydrogen-bonding network involving the chromophore and a key ARG/THR mutation (which changes both charge and steric hindrance).

Large Stokes shift red fluorescent proteins (LSS-RFPs) are genetically encoded and exhibit a significant difference of a few hundreds of nanometers between their excitation and emission peak maxima (i.e., the Stokes shift). These LSS-RFPs (absorbing blue light and emitting red light) feature a unique photocycle responsible for their significant Stokes shift. The photocycle associated with this LSS characteristic in certain RFPs is quite perplexing, hinting at the complex nature of excited-state photophysics. This article provides a brief review on the fundamental mechanisms governing the photocycle of various LSS-RFPs, followed by a discussion on experimental results on mKeima emphasizing its relaxation pathways which garnered attention due to its >200 nm Stokes shift. Corroborating steady-state spectroscopy with computational studies, four different forms of chromophore of mKeima contributing to the cis-trans conformers of the neutral and anionic forms were identified in a recent study. Furthering these findings, in this account a detailed discussion on the photocycle of mKeima, which encompasses sequential excited-state isomerization, proton transfer, and subsequent structural reorganization involving three isomers, leading to an intriguing temperature and pH-dependent dual fluorescence, is explored using broadband femtosecond transient absorption spectroscopy., (© 2024 American Society for Photobiology.)

Photoconvertible fluorescent proteins (pcFPs) undergo a slow photochemical transformation when irradiated with blue light. Since their emission is shifted from green to red, pcFPs serve as convenient fusion tags in several cutting-edge biological imaging technologies. Here, a pcFP termed the Least Evolved Ancestor (LEA) was used as a model system to determine the rate-limiting step of photoconversion. Perdeuterated histidine residues were introduced by isotopic enrichment and chromophore content was monitored by absorbance. pH-dependent photoconversion experiments were carried out by exposure to 405-nm light followed by dark equilibration. The loss of green chromophore correlated well with the rise of red, and maximum photoconversion rates were observed at pH 6.5 (0.059 ± 0.001 min -1 for red color acquisition). The loss of green and the rise of red provided deuterium kinetic isotope effects (DKIEs) that were identical within error, 2.9 ± 0.9 and 3.8 ± 0.6, respectively. These data indicate that there is one rate-determining step in the light reactions of photoconversion, and that CH bond cleavage occurs in the transition state of this step. We propose that these reactions are rate-limited on the min time scale by the abstraction of a proton at the His62 beta-carbon. A conformational intermediate such as a twisted or isomerized chromophore is proposed to slowly equilibrate in the dark to generate the red form. Additionally, His62 may shuttle protons to activate Glu211 to serve as a general base, while also facilitating beta-elimination. This idea is supported by a recent X-ray structure of methylated His62., (© 2024 The Protein Society.)

Generating active, pure, and monodisperse protein remains a major bottleneck for structural studies using X-ray crystallography and cryo-electron microscopy (cryo-EM). The current methodology heavily relies on overexpressing the recombinant protein fused with a histidine tag in conventional expression systems and evaluating the quality and stability of purified protein using size exclusion chromatography (SEC). This requires a large amount of protein and can be highly laborious and time consuming. Therefore, this approach is not suitable for high-throughput screening and low-expressing macromolecules, particularly eukaryotic membrane proteins. Using fluorescent proteins fused to the target protein (applicable to both soluble and membrane proteins) enables rapid and efficient screening of expression level and monodispersity of tens of unpurified constructs using fluorescence-based size exclusion chromatography (FSEC). Moreover, FSEC proves valuable for screening multiple detergents to identify the most stabilizing agent in the case of membrane proteins. Additionally, FSEC can facilitate nanodisc reconstitution by determining the optimal ratio of membrane scaffold protein (MSP), lipids, and target protein. The distinct advantages offered by FSEC indicate that fluorescent proteins can serve as a viable alternative to commonly used affinity tags for both characterization and purification purposes. In this review, I will summarize the advantages of this technique using examples from my own work. It should be noted that this article is not intended to provide an exhaustive review of all available literature, but rather to offer representative examples of FSEC applications., (© 2023 Federation of European Biochemical Societies.)

The development of new or improved single fluorescent protein (FP)-based biosensors (SFPBs), particularly those with excitation and emission at near-infrared wavelengths, is important for the continued advancement of biological imaging applications. In an effort to accelerate the development of new SFPBs, we report modified transposons for the transposase-based creation of libraries of FPs randomly inserted into analyte binding domains, or vice versa. These modified transposons feature ends that are optimized to minimize the length of the linkers that connect the FP to the analyte binding domain. We rationalized that shorter linkers between the domains should result in more effective allosteric coupling between the analyte binding-dependent conformational change in the binding domain and the fluorescence modulation of the chromophore of the FP domain. As a proof of concept, we employed end-modified Mu transposons for the discovery of SFPB prototypes based on the insertion of two circularly permuted red FPs (mApple and FusionRed) into binding proteins for l-lactate and spermidine. Using an analogous approach, we discovered calcium ion (Ca 2+ )-specific SFPBs by random insertion of calmodulin (CaM)-RS20 into miRFP680, a particularly bright near-infrared (NIR) FP based on a biliverdin (BV)-binding fluorescent protein. Starting from an miRFP680-based Ca 2+ biosensor prototype, we performed extensive directed evolution, including under BV-deficient conditions, to create highly optimized biosensors designated the NIR-GECO3 series. We have extensively characterized the NIR-GECO3 series and explored their utility for biological Ca 2+ imaging. The methods described in this work will serve to accelerate SFPB development and open avenues for further exploration and optimization of SFPBs across a spectrum of biological applications.

In-cell self-assembly of natural viral capsids is an event that can be visualized under transmission electron microscopy (TEM) observations. By mimicking the self-assembly of natural viral capsids, various artificial protein- and peptide-based nanocages were developed; however, few studies have reported the in-cell self-assembly of such nanocages. Our group developed a β-Annulus peptide that can form a nanocage called artificial viral capsid in vitro, but in-cell self-assembly of the capsid has not been achieved. Here, we designed an artificial viral capsid decorated with a fluorescent protein, StayGold, to visualize in-cell self-assembly. Fluorescence anisotropy measurements and fluorescence resonance energy transfer imaging, in addition to TEM observations of the cells and super-resolution microscopy, revealed that StayGold-conjugated β-Annulus peptides self-assembled into the StayGold-decorated artificial viral capsid in a cell. Using these techniques, we achieved the in-cell self-assembly of an artificial viral capsid.

Site-specific installation of non-natural functionality onto proteins has enabled countless applications in biotechnology, chemical biology, and biomaterials science. Though the N-terminus is an attractive derivatization location, prior methodologies targeting this site have suffered from low selectivity, a limited selection of potential chemical modifications, and/or challenges associated with divergent protein purification/modification steps. In this work, we harness the atypically split VidaL intein to simultaneously N-functionalize and purify homogeneous protein populations in a single step. Our method─referred to as VidaL-tagged expression and protein ligation (VEPL)─enables modular and scalable production of N-terminally modified proteins with native bioactivity. Demonstrating its flexibility and ease of use, we employ VEPL to combinatorially install 4 distinct (multi)functional handles (e.g., biotin, alkyne, fluorophores) to the N-terminus of 4 proteins that span three different classes: fluorescent (Enhanced Green Fluorescent Protein, mCherry), enzymatic (β-lactamase), and growth factor (epidermal growth factor). Moving forward, we anticipate that VEPL's ability to rapidly generate and isolate N-modified proteins will prove useful across the growing fields of applied chemical biology.

Genetically encoded Ca 2+ indicators (GECIs) are versatile for live imaging of cellular activities. Besides the brightness and dynamic range of signal change of GECIs, Ca 2+ affinity is another critical parameter for successful Ca 2+ imaging, as the concentration range of Ca 2+ dynamics differs from low nanomolar to sub-millimolar depending on the celltype and organism. However, ultrahigh-affinity GECIs, particularly the single fluorescent protein (1FP)-type, are lacking. Here, we report a simple strategy that increases Ca 2+ affinity through the linker length optimization in topology mutants of existing 1FP-type GECIs. The resulting ultrahigh-affinity GECIs, CaMPARI-nano, BGECO-nano, and RCaMP-nano (K d  = 17-25 nM), enable unique biological applications, including the detection of low nanomolar Ca 2+ dynamics, highlighting active signaling cells, and multi-functional imaging with other second messengers. The linker length optimization in topology mutants could be applied to other 1FP-type indicators of glutamate and potassium, rendering it a widely applicable technique for modulating indicator affinity., (© 2024. The Author(s).)

Far-red and near-infrared fluorescent proteins have regions of maximum transmission in most tissues and can be widely used as fluorescent biomarkers. We report that fluorescent phycobiliproteins originating from the phycobilisome core subunit ApcF2 can covalently bind biliverdin, named BDFPs. To further improve BDFPs, we conducted a series of studies. Firstly, we mutated K53Q and T144A of BDFPs to increase their effective brightness up to 190 % in vivo. Secondly, by homochromatic tandem fusion of high-brightness BDFPs to achieve monomerization, which increases the effective brightness by up to 180 % in vivo, and can effectively improve the labeling effect. By combining the above two approaches, the brightness of the tandem BDFPs was much improved compared with that of the previously reported fluorescent proteins in a similar spectral range. The tandem BDFPs were expressed stably while maintaining fluorescence in mammalian cells and Caenorhabditis elegans. They were also photostable and resistant to high temperature, low pH, and chemical denaturation. The tandem BDFPs advantages were proved in applications as biomarkers for imaging in super-resolution microscopy., (© 2024 Wiley-VCH GmbH.)

The Keima family comprises large Stokes shift fluorescent proteins that are useful for dual-color fluorescence cross-correlation spectroscopy and multicolor imaging. The tKeima is a tetrameric large Stokes shift fluorescent protein and serves as the ancestor fluorescent protein for both dKeima and mKeima. The spectroscopic properties of tKeima have been previously reported; however, its structural basis and molecular properties have not yet been elucidated. In this study, we present the crystallographic results of the large Stokes shift fluorescent protein tKeima. The purified tKeima protein spontaneously crystallized after purification without further crystallization. The crystal structure of tKeima was determined at 3.0 Å resolution, revealing a β-barrel fold containing the Gln-Tyr-Gly chromophores mainly with cis-conformation. The tetrameric interfaces of tKeima were stabilized by numerous hydrogen bonds and salt-bridge interactions. These key residues distinguish the substituted residues in dKeima and mKeima. The key structure-based residues involved in the tetramer formation of tKeima provide insights into the generation of a new type of monomeric mKeima. This structural analysis expands our knowledge of the Keima family and provides insights into its protein engineering., Competing Interests: The authors declare no conflicts of interest.

Background: The accurate and rapid detection of blood lead concentration is of paramount importance for assessing human lead exposure levels. Fluorescent protein-based probes, known for their high detection capabilities and low toxicity, are extensively used in analytical sciences. However, there is currently a shortage of such probes designed for ultrasensitive detection of Pb 2+ , and no reported probes exist for the quantitative detection of Pb 2+ in blood samples. This study aims to fill this critical void by developing and evaluating a novel fluorescent protein-based probe that promises accurate and rapid lead quantification in blood., Results: A simple and small-molecule fluorescent protein-based probe was successfully constructed herein using a peptide PbrBD designed for Pb 2+ recognition coupled to a single fluorescent protein, sfGFP. The probe retains a three-coordinate configuration to identify Pb 2+ and has a high affinity for it with a K d ' of 1.48 ± 0.05 × 10 -17  M. It effectively transfers the conformational changes of the peptide to the chromophore upon Pb 2+ binding, leading to fast fluorescence quenching and a sensitive response to Pb 2+ . The probe offers a broad dynamic response range of approximately 37-fold and a linear detection range from 0.25 nM to 3500 nM. More importantly, the probe can resist interference of metal ions in living organisms, enabling quantitative analysis of Pb 2+ in the picomolar to millimolar range in serum samples with a recovery percentage of 96.64%-108.74 %., Significance: This innovative probe, the first to employ a single fluorescent protein-based probe for ultrasensitive and precise analysis of Pb 2+ in animal and human serum, heralds a significant advancement in environmental monitoring and public health surveillance. Furthermore, as a genetically encoded fluorescent probe, this probe also holds potential for the in vivo localization and concentration monitoring of Pb 2+ ., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Flavin-based fluorescent proteins are oxygen-independent reporters that hold great promise for imaging anaerobic and hypoxic biological systems. In this study, we explored the feasibility of applying circular permutation, a valuable method for the creation of fluorescent sensors, to flavin-based fluorescent proteins. We used rational design and structural data to identify a suitable location for circular permutation in iLOV, a flavin-based reporter derived from A. thaliana. However, relocating the N- and C-termini to this position resulted in a significant reduction in fluorescence. This loss of fluorescence was reversible, however, by fusing dimerizing coiled coils at the new N- and C-termini to compensate for the increase in local chain entropy. Additionally, by inserting protease cleavage sites in circularly permuted iLOV, we developed two protease sensors and demonstrated their application in mammalian cells. In summary, our work establishes the first approach to engineer circularly permuted FbFPs optimized for high fluorescence and further showcases the utility of circularly permuted FbFPs to serve as a scaffold for sensor engineering., (© 2024 Wiley-VCH GmbH.)

Small extracellular vesicles (sEVs) are nanosized vesicles enclosed in a lipid membrane released by nearly all cell types. sEVs have been considered as reliable biomarkers for diagnostics and effective carriers. Despite the clear importance of sEV functionality, sEV research faces challenges imposed by the small size and precise imaging of sEVs. Recent advances in live and high-resolution microscopy, combined with efficient labeling strategies, enable us to investigate the composition and behavior of EVs within living organisms. Here, a modified sEVs was generated with a near infrared fluorescence protein mKate2 using a VSVG viral pseudotyping-based approach for monitoring sEVs. An observed was made that the mKate2-tagged protein can be incorporated into the membranes of sEVs without altering their physical properties. In vivo imaging demonstrates that sEVs labeled with mKate2 exhibit excellent brightness and high photostability, allowing the acquisition of long-term investigation comparable to those achieved with mCherry labeling. Importantly, the mKate2-tagged sEVs show a low toxicity and exhibit a favorable safety profile. Furthermore, the co-expression of mKate2 and rabies virus glycoprotein (RVG) peptide on sEVs enables brain-targeted visualization, suggesting the mKate2 tag does not alter the biodistribution of sEVs. Together, the study presents the mKate2 tag as an efficient tracker for sEVs to monitor tissue-targeting and biodistribution in vivo., (© 2024 Wiley‐VCH GmbH.)

Light-sheet fluorescence microscopy is an invaluable tool for four-dimensional biological imaging of multicellular systems due to the rapid volumetric imaging and minimal illumination dosage. However, it is challenging to retrieve fine subcellular information, especially in living cells, due to the width of the sheet of light (>1 μm). Here, using reversibly switchable fluorescent proteins (RSFPs) and a periodic light pattern for photoswitching, we demonstrate a super-resolution imaging method for rapid volumetric imaging of subcellular structures called multi-sheet RESOLFT. Multiple emission-sheets with a width that is far below the diffraction limit are created in parallel increasing recording speed (1-2 Hz) to provide super-sectioning ability (<100 nm). Our technology is compatible with various RSFPs due to its minimal requirement in the number of switching cycles and can be used to study a plethora of cellular structures. We track cellular processes such as cell division, actin motion and the dynamics of virus-like particles in three dimensions., (© 2024. The Author(s).)

The background light from out-of-focus planes hinders resolution enhancement in structured illumination microscopy when observing volumetric samples. Here we used selective plane illumination and reversibly photoswitchable fluorescent proteins to realize structured illumination within the focal plane and eliminate the out-of-focus background. Theoretical investigation of the imaging properties and experimental demonstrations show that selective plane activation is beneficial for imaging dense microstructures in cells and cell spheroids., (© 2024. The Author(s), under exclusive licence to Springer Nature America, Inc.)

Autophagy is a widely conserved and multistep cellular catabolic process and maintains cellular homeostasis and normal cellular functions via the degradation of some harmful intracellular components. It was reported that high basal autophagic activity may be closely related to tumorigenesis. So far, the fluorescence imaging technique has been widely used to study autophagic processes, but this method is only suitable for distinguishing autophagosomes and autolysosomes. Simultaneously monitoring multiple autophagic processes remains a significant challenge due to the lack of an efficient detection method. Here, we demonstrated a new method for simultaneously monitoring multiple autophagic processes and assessing autophagic flux in single cells based on in situ fluorescence cross-correlation spectroscopy (FCCS). In this study, microtubule-associated protein 1A/1B-light chain 3B (LC3B) was fused with two tandem fluorescent proteins [mCherry red fluorescent protein (mCherry) and enhanced green fluorescent protein (EGFP)] to achieve the simultaneous labeling and distinguishing of multiple autophagic structures based on the differences in characteristic diffusion time (τ D ). Furthermore, we proposed a new parameter "delivery efficiency of autophagosome ( DE AP )" to assess autophagic flux based on the cross correlation ( CC ) value. Our results demonstrate that FCCS can efficiently distinguish three autophagic structures, assess the induced autophagic flux, and discriminate different autophagy regulators. Compared with the commonly used fluorescence imaging technique, the resolution of FCCS remains unaffected by Brownian motion and fluorescent monomers in the cytoplasm and is well suitable to distinguishing differently colored autophagic structures and monitoring autophagy.

Protein phase separation plays a very important role in many biological processes and is closely related to the occurrence and development of some serious diseases. So far, the fluorescence imaging method and fluorescence correlation spectroscopy (FCS) have been frequently used to study the phase separation behavior of proteins. Due to the wide size distribution of protein condensates in phase separation from nano-scale to micro-scale in solution and living cells, it is difficult for the fluorescence imaging method and conventional FCS to fully reflect the real state of protein phase separation in the solution due to the low spatio-temporal resolution of the conventional fluorescence imaging method and the limited detection area of FCS. Here, we proposed a novel method for studying the protein phase separation process by objective scanning-based fluorescence cross-correlation spectroscopy (Scan-FCCS). In this study, CRDBP proteins were used as a model and respectively fused with fluorescent proteins (EGFP and mCherry). We first compared conventional FCS and Scan-FCS methods for characterizing the CRDBP protein phase separation behaviors and found that the reproducibility of Scan-FCS is significantly improved by the scanning mode. We studied the self-fusion process of mCherry-CRDBP and EGFP-CRDBP and observed that the phase change concentration of CRDBP was 25 nM and the fusion of mCherry-CRDBP and EGFP-CRDBP at 500 nM was completed within 70 min. We studied the effects of salt concentration and molecular crowding agents on the phase separation of CRDBP and found that salt can prevent the self-fusion of CRDBP and molecular crowding agents can improve the self-fusion of CRDBP. Furthermore, we found the recruitment behavior of CRDBP to β-catenin proteins and studied their recruitment dynamics. Compared to conventional FCS, Scan-FCCS can significantly improve the reproducibility of measurements due to the dramatic increase of detection zone, and more importantly, this method can provide information about self-fusion and recruitment dynamics in protein phase separation.

To monitor the Ca 2+ dynamics in cells, various genetically encoded Ca 2+ indicators (GECIs) based on Förster resonance energy transfer (FRET) between fluorescent proteins are widely used for live imaging. Conventionally, cyan and yellow fluorescent proteins have been often used as FRET pairs. Meanwhile, bathochromically shifted indicators with green and red fluorescent protein pairs have various advantages, such as low toxicity and autofluorescence in cells. However, it remains difficult to develop them with a similar level of dynamic range as cyan and yellow fluorescent protein pairs. To improve this, we used Gamillus, which has a unique trans-configuration chromophore, as a green fluorescent protein. Based on one of the best high-dynamic-range GECIs, Twitch-NR, we developed a GECI with 1.5-times higher dynamic range (253%), Twitch-GmRR, using RRvT as a red fluorescent protein. Twitch-GmRR had high brightness and photostability and was successfully applied for imaging the Ca 2+ dynamics in live cells. Our results suggest that Gamillus with trans-type chromophores contributes to improving the dynamic range of GECIs. Therefore, selection of the cis-trans isomer of the chromophore may be a fundamental approach to improve the dynamic range of green-red FRET indicators, unlimited by GECIs.

Förster resonance energy transfer (FRET) spectrometry is a method for determining the quaternary structure of protein oligomers from distributions of FRET efficiencies that are drawn from pixels of fluorescence images of cells expressing the proteins of interest. FRET spectrometry protocols currently rely on obtaining spectrally resolved fluorescence data from intensity-based experiments. Another imaging method, fluorescence lifetime imaging microscopy (FLIM), is a widely used alternative to compute FRET efficiencies for each pixel in an image from the reduction of the fluorescence lifetime of the donors caused by FRET. In FLIM studies of oligomers with different proportions of donors and acceptors, the donor lifetimes may be obtained by fitting the temporally resolved fluorescence decay data with a predetermined number of exponential decay curves. However, this requires knowledge of the number and the relative arrangement of the fluorescent proteins in the sample, which is precisely the goal of FRET spectrometry, thus creating a conundrum that has prevented users of FLIM instruments from performing FRET spectrometry. Here, we describe an attempt to implement FRET spectrometry on temporally resolved fluorescence microscopes by using an integration-based method of computing the FRET efficiency from fluorescence decay curves. This method, which we dubbed time-integrated FRET (or tiFRET), was tested on oligomeric fluorescent protein constructs expressed in the cytoplasm of living cells. The present results show that tiFRET is a promising way of implementing FRET spectrometry and suggest potential instrument adjustments for increasing accuracy and resolution in this kind of study.

Genetically encoded fluorescent metal ion sensors are powerful tools for elucidating metal dynamics in living systems. Over the last 25 years since the first examples of genetically encoded fluorescent protein-based calcium indicators, this toolbox of probes has expanded to include other essential and non-essential metal ions. Collectively, these tools have illuminated fundamental aspects of metal homeostasis and trafficking that are crucial to fields ranging from neurobiology to human nutrition. Despite these advances, much of the application of metal ion sensors remains limited to mammalian cells and tissues and a limited number of essential metals. Applications beyond mammalian systems and in vivo applications in living organisms have primarily used genetically encoded calcium ion sensors. The aim of this Perspective is to provide, with the support of historical and recent literature, an updated and critical view of the design and use of fluorescent protein-based sensors for detecting essential metal ions in various organisms. We highlight the historical progress and achievements with calcium sensors and discuss more recent advances and opportunities for the detection of other essential metal ions. We also discuss outstanding challenges in the field and directions for future studies, including detecting a wider variety of metal ions, developing and implementing a broader spectral range of sensors for multiplexing experiments, and applying sensors to a wider range of single- and multi-species biological systems.

Wild-type SAASoti and its monomeric variant mSAASoti can undergo phototransformations, including reversible photoswitching of the green form to a nonfluorescent state and irreversible green-to-red photoconversion. In this study, we extend the photochemistry of mSAASoti variants to enable reversible photoswitching of the red form. This result is achieved by rational and site-saturated mutagenesis of the M163 and F177 residues. In the case of mSAASoti it is M163T substitution that leads to the fastest switching and the most photostable variant, and reversible photoswitching can be observed for both green and red forms when expressed in eukaryotic cells. We obtained a 13-fold increase in the switching efficiency with the maximum switching contrast of the green form and the appearance of comparable switching of the red form for the C21N/M163T mSAASoti variant. The crystal structure of the C21N mSAASoti in its green on-state was obtained for the first time at 3.0 Å resolution, and it is in good agreement with previously calculated 3D-model. Dynamic network analysis reveals that efficient photoswitching occurs if motions of the 66H residue and phenyl fragment of chromophore are correlated and these moieties belong to the same community., (© 2024. The Author(s).)

We used site-specific mutagenesis by targeting E179 and F190 on the structure of photoprotein Mnemiopsin 2 (Mn2) from Mnemiopsis leidyi. The tertiary structure of E179S and F190L mutants was made by the MODELLER program. Far-ultraviolet circular dichroism data showed that the overall secondary structural content of photoprotein is not changed upon mutation, however the helicity and stabilizing interactions in helical structure decreases in mutants as compared with the wild-type (WT) photoprotein. Fluorescence spectra data revealed that the tertiary structure of the mutants is more compact than that of WT Mn2. According to the heat-induced denaturation experiments data, the melting temperature (T m ) for the unfolding of tertiary structure of the F190L variant increases by 3°C compared with that of the WT and E179S mutant. Interestingly, the conformational enthalpy of the F190L mutant (86 kcal mol -1 ) is considerably lower than those in the WT photoprotein (102 kcal mol -1 ) and E179S mutant (106 kcal mol -1 ). The significant difference in the enthalpy of the thermal unfolding process could be explained by considering that the thermally denatured state of the F190L mutant is structurally less expanded than the WT and E179S variants. Bioluminescence activity data showed that the maximum characteristic wavelengths of the mutants undergo blue shift as compared with the WT protein. Initial intensity of the F190L and E179S variants was recorded to be 137.5% and 55.9% of the WT protein, respectively., (© 2024 John Wiley & Sons Ltd.)

Photoconvertible fluorescent proteins (PCFP) are important cellular markers in advanced imaging modalities such as photoactivatable localization microscopy (PALM). However, their complex photophysical and photochemical behavior hampers applications such as quantitative and single-particle-tracking PALM. This work employs multidimensional NMR combined with ensemble fluorescence measurements to show that the popular mEos4b in its Green state populates two conformations (A and B), differing in side-chain protonation of the conserved residues E212 and H62,  altering the hydrogen-bond network in the chromophore pocket. The interconversion (protonation/deprotonation) between these two states, which occurs on the minutes time scale in the dark, becomes strongly accelerated in the presence of UV light, leading to a population shift. This work shows that the reversible photoswitching and Green-to-Red photoconversion properties differ between the A and B states. The chromophore in the A-state photoswitches more efficiently and is proposed to be more prone to photoconversion, while the B-state shows a higher level of photobleaching. Altogether, this data highlights the central role of conformational heterogeneity in fluorescent protein photochemistry., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Artificial molecular photoswitches that can be reversibly controlled into different configurations by external light stimulation have broad application prospects in various fields, such as materials and chemical biology. Among them, the pyrrole hemithioindigo (PHT) photoswitch has a geometric structure similar to that of the fluorescent protein chromophore. What happens when the chromophore is replaced by PHT, and does it achieve similar functions to the original one? To answer these questions, we carried out ONIOM(QM/MM) and classical molecular dynamics studies on the photoisomerization mechanism and spectroscopic properties of PHT in the fluorescent protein. The results showed that in the protein environment, the fate of excited PHT is governed by the competition between fluorescence emission and hula-twist isomerization. Due to the strong steric hindrance effects caused by the interlacing residues in the protein that restrict the PHT conformation transformation, the cis-to-trans isomerization process of PHT needs to overcome a barrier of at least 4.9 kcal/mol; thus, fluorescence emission is more dominant in competition. It is also found that the intermolecular interaction between LYS67 and the carbonyl oxygen of PHT has a significant effect on the fluorescence emission. These results revealed the photochemical reaction mechanism of a light-driven molecular switch in the fluorescent protein and provided further theoretical support for the field of chemical biology.

The development of an easy-to-use and rapid method for the determination of dopamine levels is desirable for the diagnosis of neurological conditions, such as Parkinson's disease, which are characterized by low levels of dopamine. Herein, a polydiacetylene liposomal aequorin bioluminescent device (PLABD) containing octadecylboronic acid (OBA) as a recognition material (PLABD-OBA) was prepared for the determination of dopamine concentrations in aqueous solution. The bioluminescent signals of the photoprotein aequorin in PLABD-OBA increased according to increasing dopamine concentrations. The calibration curve showed good linearity over a dopamine concentration range of 70-700 µM (r = 0.918), with a detection limit of 7.5 µM. The addition of other catecholamines to the PLABD-OBA resulted in low bioluminescent signals of aequorin. Because the physiological levels of dopamine are generally 0.001-1.0 µM, this system had insufficient sensitivity for the clinical monitoring of dopamine levels. However, the PLABD-OBA developed herein is an easy-to-use and rapid analytical method that is specific for dopamine., (© 2023. The Author(s), under exclusive licence to The Japan Society for Analytical Chemistry.)

Genetically encoded sensors enable quantitative imaging of analytes in live cells. Sensors are commonly constructed by combining ligand-binding domains with one or more sensitized fluorescent protein (FP) domains. Sensors based on a single FP can be susceptible to artifacts caused by changes in sensor levels or distribution in vivo. To develop intensiometric sensors with the capacity for ratiometric quantification, dual-FP Matryoshka sensors were generated by using a single cassette with a large Stokes shift (LSS) reference FP nested within the reporter FP (cpEGFP). Here, we present a genetically encoded calcium sensor that employs green apple (GA) Matryoshka technology by incorporating a newly designed red LSSmApple fluorophore. LSSmApple matures faster and provides an optimized excitation spectrum overlap with cpEGFP, allowing for monochromatic coexcitation with blue light. The LSS of LSSmApple results in improved emission spectrum separation from cpEGFP, thereby minimizing fluorophore bleed-through and facilitating imaging using standard dichroic and red FP (RFP) emission filters. We developed an image analysis pipeline for yeast ( Saccharomyces cerevisiae ) timelapse imaging that utilizes LSSmApple to segment and track cells for high-throughput quantitative analysis. In summary, we engineered a new FP, constructed a genetically encoded calcium indicator (GA-MatryoshCaMP6s), and performed calcium imaging in yeast as a demonstration.

Assembly of de novo peptides designed from scratch is in a semi-rational manner and creates artificial supramolecular structures with unique properties. Considering that the functions of various proteins in living cells are highly regulated by their assemblies, building artificial assemblies within cells holds the potential to simulate the functions of natural protein assemblies and engineer cellular activities for controlled manipulation. How can we evaluate the self-assembly of designed peptides in cells? The most effective approach involves the genetic fusion of fluorescent proteins (FPs). Expressing a self-assembling peptide fused with an FP within cells allows for evaluating assemblies through fluorescence signal. When µm-scale assemblies such as condensates are formed, the peptide assemblies can be directly observed by imaging. For sub-µm-scale assemblies, fluorescence correlation spectroscopy analysis is more practical. Additionally, the fluorescence resonance energy transfer (FRET) signal between FPs is valuable evidence of proximity. The decrease in fluorescence anisotropy associated with homo-FRET reveals the properties of self-assembly. Furthermore, by combining two FPs, one acting as a donor and the other as an acceptor, the heteromeric interaction between two different components can be studied through the FRET signal. In this chapter, we provide detailed protocols, from designing and constructing plasmid DNA expressing the peptide-fused protein to analysis of self-assembly in living cells., (Copyright © 2024. Published by Elsevier Inc.)

Akanes are fluorescent proteins that have several fluorescence maxima. In this report, Akane1 and Akane3 from Scleronephthya gracillima were selected, successfully overexpressed in Escherichia coli and purified by affinity chromatography. Fluorescence spectra of the recombinant Akanes matured in darkness, or ambient light were found to have several fluorescence peaks. SDS-PAGE analysis revealed that Akanes matured in ambient light have two fragments. MS/MS analysis of Akanes digested with trypsin showed that the cleavage site is the same as observed for the photoconvertible fluorescent protein Kaede. The differences between the calculated masses from the amino acid sequence of Akane1 and the measured masses of Akane1 fragments obtained under ambient light coincided with those of Kaede. In contrast, a mass difference between the measured N-terminal Akane3 fragment and the calculated mass indicated that Akane3 is modified in the N-terminal region. These results indicate that numerous peaks in the fluorescent spectra of Akanes partly arise from isoproteins of Akanes and photoconversion. Photoconversion of Akane1 caused a fluorescence change from green to red, which was also observed for Akane3; however, the fluorescent intensity decreased dramatically when compared with that of Akane3., (© The Author(s) 2023. Published by Oxford University Press on behalf of the Japanese Biochemical Society. All rights reserved.)

Photoswitchable Dronpa (psDronpa) is a unique member of the fluorescent protein family that can undergo reversible photoinduced switching between fluorescent and dark states and has recently been engineered into a dimer (pdDronpaV) that can dissociate and reassociate as part of its photoswitchable pathway. However, the specific details of the protein structure-function relationship of the dimer interface along with how the dimer proteins interact with each other upon chromophore isomerization are not yet clear. Classical molecular dynamics simulations were performed on psDronpa as monomers and dimers as well as the pdDronpaV dimer and with cis / trans chromophore structures. Analysis of the cis and trans isomers of the chromophore illustrated key differences between their interactions with residues in the protein in both the monomer and dimer forms of psDronpa. Examination of the psDronpa dimer showed nonidentical chromophore interactions between the domains, indicating domain directional favoring. Examination of the trans form of pdDronpaV illuminated the importance of hydrogen bonding between the monomeric domains in maintaining their association, as well as illustrating the motion of dissociation of the domains. This discovery offers important information for possible future mutations of pdDronpaV that might be made to accelerate dissociation.

Mnemiopsin 1 (Mn1) and Mnemiopsin 2 (Mn2) are photoproteins found in Mnemiopsis leidyi. We have tried to answer the question of whether the structural features of photoproteins can explain the observed activity data. According to the activity measurements data, they have the same characteristic wavelength. However, the initial intensity of Mn2 is significantly higher than that of Mn1, and decay time of Mn1 (0.92 s -1 ) is lower than that of Mn2 (1.46 s -1 ). The phylogenetic analysis demonstrates that, compared with Obelin and Aequorin from Obelia longissima and Aequorea victoria, respectively, a gene modification event may have caused the expansion of the N-terminal side of all photoproteins from M. leidyi. An in silico study has shown that the stability of the photoprotein-substrate complex of Mn2 is higher than that of Mn1, indicating a higher affinity of the substrate for Mn2 compared with Mn1. It was revealed that the active EF-hand loops 1 and III in Mn2 is locally more rigid compared with those in Mn1. We concluded that different stability of the photoprotein complexes leads to different initial intensity. While different patterns of the local dynamics of loops I and III may influence the decay rate., (© 2023 John Wiley & Sons Ltd.)

Red fluorescent proteins (RFPs) represent an increasingly popular class of genetically encodable bioprobes and biomarkers that can advance next-generation breakthroughs across the imaging and life sciences. Since the rational design of RFPs with improved functions or enhanced versatility requires a mechanistic understanding of their working mechanisms, while fluorescence is intrinsically an ultrafast event, a suitable toolset involving steady-state and time-resolved spectroscopic techniques has become powerful in delineating key structural features and dynamic steps which govern irreversible photoconverting or reversible photoswitching RFPs, and large Stokes shift (LSS)RFPs. The pertinent cis-trans isomerization and protonation state change of RFP chromophores in their local environments, involving key residues in protein matrices, lead to rich and complicated spectral features across multiple timescales. In particular, ultrafast excited-state proton transfer in various LSSRFPs showcases the resolving power of wavelength-tunable femtosecond stimulated Raman spectroscopy (FSRS) in mapping a photocycle with crucial knowledge about the red-emitting species. Moreover, recent progress in noncanonical RFPs with a site-specifically modified chromophore provides an appealing route for efficient engineering of redder and brighter RFPs, highly desirable for bioimaging. Such an effective feedback loop involving physical chemists, protein engineers, and biomedical microscopists will enable future successes to expand fundamental knowledge and improve human health., (© 2023 Wiley-VCH GmbH.)

Molecules of fluorescent proteins (FPs) exhibit distinct optical directionality. This optical directionality is characterized by transition dipole moments (TDMs), and their orientation with respect to the molecular structures. Although our recent observations of FP crystals allowed us to determine the mean TDM directions with respect to the framework of representative FP molecules, the dynamics of TDM orientations within FP molecules remain to be ascertained. Here we describe the results of our investigations of the dynamics of TDM directions in the fluorescent proteins eGFP, mTurquoise2 and mCherry, through time-resolved fluorescence polarization measurements and microsecond time scale all-atom molecular dynamics (MD) simulations. The investigated FPs exhibit initial fluorescence anisotropies ( r 0 ) consistent with significant differences in the orientation of the excitation and emission TDMs. However, based on MD data, we largely attribute this observation to rapid (sub-nanosecond) fluorophore motions within the FP molecular framework. Our results allow improved determinations of orientational distributions of FP molecules by polarization microscopy, as well as more accurate interpretations of fluorescence resonance energy transfer (FRET) observations.

We recently converted the GAF domain of NpR3784 cyanobacteriochrome into near-infrared (NIR) fluorescent proteins (FPs). Unlike cyanobacterichrome, which incorporates phycocyanobilin tetrapyrrole, engineered NIR FPs bind biliverdin abundant in mammalian cells, thus being the smallest scaffold for it. Here, we determined the crystal structure of the brightest blue-shifted protein of the series, miRFP670nano3, at 1.8 Å resolution, characterized its chromophore environment and explained the molecular basis of its spectral properties. Using the determined structure, we have rationally designed a red-shifted NIR FP, termed miRFP704nano, with excitation at 680 nm and emission at 704 nm. miRFP704nano exhibits a small size of 17 kDa, enhanced molecular brightness, photostability and pH-stability. miRFP704nano performs well in various protein fusions in live mammalian cells and should become a versatile genetically-encoded NIR probe for multiplexed imaging across spatial scales in different modalities., (© 2023 The Authors. Protein Science published by Wiley Periodicals LLC on behalf of The Protein Society.)