Search

JET experiments using the fuel mixture envisaged for fusion power plants, deuterium and tritium (D–T), provide a unique opportunity to validate existing D–T fusion power prediction capabilities in support of future device design and operation preparation. The 2021 JET D–T experimental campaign has achieved D–T fusion powers sustained over 5 s in ITER-relevant conditions i.e. operation with the baseline or hybrid scenario in the full metallic wall. In preparation of the 2021 JET D–T experimental campaign, extensive D–T predictive modelling was carried out with several assumptions based on D discharges. To improve the validity of ITER D–T predictive modelling in the future, it is important to use the input data measured from 2021 JET D–T discharges in the present core predictive modelling, and to specify the accuracy of the D–T fusion power prediction in comparison with the experiments. This paper reports on the validation of the core integrated modelling with TRANSP, JINTRAC, and ETS coupled with a quasilinear turbulent transport model (Trapped Gyro Landau Fluid or QualLiKiz) against the measured data in 2021 JET D–T discharges. Detailed simulation settings and the heating and transport models used are described. The D–T fusion power calculated with the interpretive TRANSP runs for 38 D–T discharges (12 baseline and 26 hybrid discharges) reproduced the measured values within 20 $\%$ . This indicates the additional uncertainties, that could result from the measurement error bars in kinetic profiles, impurity contents and neutron rates, and also from the beam-thermal fusion reaction modelling, are less than $20\%$ in total. The good statistical agreement confirms that we have the capability to accurately calculate the D–T fusion power if correct kinetic profiles are predicted, and indicates that any larger deviation of the D–T fusion power prediction from the measured fusion power could be attributed to the deviation of the predicted kinetic profiles from the measured kinetic profiles in these plasma scenarios. Without any posterior adjustment of the simulation settings, the ratio of predicted D–T fusion power to the measured fusion power was found as 65%–96% for the D–T baseline and 81%–97% for D–T hybrid discharge. Possible reasons for the lower D–T prediction are discussed and future works to improve the fusion power prediction capability are suggested. The D–T predictive modelling results have also been compared to the predictive modelling of the counterpart D discharges, where the key engineering parameters are similar. Features in the predicted kinetic profiles of D–T discharges such as underprediction of n _e are also found in the prediction results of the counterpart D discharges, and it leads to similar levels of the normalized neutron rate prediction between the modelling results of D–T and the counterpart D discharges. This implies that the credibility of D–T fusion power prediction could be a priori estimated by the prediction quality of the preparatory D discharges, which will be attempted before actual D–T experiments.

The present paper is dedicated to the study of the discrepancies encountered in electron temperature (Te) measurements carried out with electron cyclotron emission (ECE) and Thomson scattering (TS) diagnostics in the core of the JET tokamak. A large database of discharges has been collected, including high-performance scenarios performed with deuterium only and deuterium–tritium mixtures. Discrepancies have been found between core Te measurements taken with an X-mode ECE interferometer (TECE) and a LIDAR TS system (TLID) for T e > 5 keV. Depending on the plasma scenario, TECE has been found to be systematically higher or lower than TLID. Discrepancies have also been observed between the peaks of the ECE spectrum in the second (X2) and third (X3) harmonic domains, even in high optical thickness conditions. These discrepancies can be interpreted as evidence of the presence of non-Maxwellian features in the electron energy distribution function (EEDF). In order to investigate the relation between the shape of the EEDF and the measured discrepancies, a model for bipolar perturbations of Maxwellian EEDF has been developed. The model allows analytical calculations of ECE absorption and emission coefficients; hence, the comparison of modeled ECE spectra with experimental data. The different experimental results observed for the various JET scenarios have been found to be qualitatively reproducible by adapting the model parameters, suggesting that bipolar distortions of the bulk EEDF could play a role in giving rise to the reported discrepancies between ECE and TS measurements. [ABSTRACT FROM AUTHOR]

JET experiments using the fuel mixture envisaged for fusion power plants, deuterium and tritium (D–T), provide a unique opportunity to validate existing D–T fusion power prediction capabilities in support of future device design and operation preparation. The 2021 JET D–T experimental campaign has achieved D–T fusion powers sustained over 5 s in ITER-relevant conditions i.e. operation with the baseline or hybrid scenario in the full metallic wall. In preparation of the 2021 JET D–T experimental campaign, extensive D–T predictive modelling was carried out with several assumptions based on D discharges. To improve the validity of ITER D–T predictive modelling in the future, it is important to use the input data measured from 2021 JET D–T discharges in the present core predictive modelling, and to specify the accuracy of the D–T fusion power prediction in comparison with the experiments. This paper reports on the validation of the core integrated modelling with TRANSP, JINTRAC, and ETS coupled with a quasilinear turbulent transport model (Trapped Gyro Landau Fluid or QualLiKiz) against the measured data in 2021 JET D–T discharges. Detailed simulation settings and the heating and transport models used are described. The D–T fusion power calculated with the interpretive TRANSP runs for 38 D–T discharges (12 baseline and 26 hybrid discharges) reproduced the measured values within 20 %. This indicates the additional uncertainties, that could result from the measurement error bars in kinetic profiles, impurity contents and neutron rates, and also from the beam-thermal fusion reaction modelling, are less than 20 % in total. The good statistical agreement confirms that we have the capability to accurately calculate the D–T fusion power if correct kinetic profiles are predicted, and indicates that any larger deviation of the D–T fusion power prediction from the measured fusion power could be attributed to the deviation of the predicted kinetic profiles from the measured kinetic profiles in these plasma scenarios. Without any posterior adjustment of the simulation settings, the ratio of predicted D–T fusion power to the measured fusion power was found as 65%–96% for the D–T baseline and 81%–97% for D–T hybrid discharge. Possible reasons for the lower D–T prediction are discussed and future works to improve the fusion power prediction capability are suggested. The D–T predictive modelling results have also been compared to the predictive modelling of the counterpart D discharges, where the key engineering parameters are similar. Features in the predicted kinetic profiles of D–T discharges such as underprediction of ne are also found in the prediction results of the counterpart D discharges, and it leads to similar levels of the normalized neutron rate prediction between the modelling results of D–T and the counterpart D discharges. This implies that the credibility of D–T fusion power prediction could be a priori estimated by the prediction quality of the preparatory D discharges, which will be attempted before actual D–T experiments. [ABSTRACT FROM AUTHOR]

Experimental analysis of two couples of pulses in the range of input power of 26–32 MW, shows that addition of pellet throughput to high gas dosing pulses does not modify the plasma energy, but leads to better conditions as far as the tungsten concentration and core radiation are concerned. Significantly decreasing the gas dosing with addition of high pellet throughput causes the increase of plasma energy, but the W concentration increases from 5.2 × 10−5 to 6.9 × 10−5 and the core radiation from 7.5 to 11 MW. From the numerical results of the self‐consistent core‐SOL COREDIV code two mechanisms appear to be responsible for the observed different W concentrations: the core residence time of W, which is related to the energy and particle confinement time, and the divertor impurity screening efficiency, dependent on the electron density and on the perpendicular transport coefficient in the SOL. [ABSTRACT FROM AUTHOR]

The high confinement mode (H-mode) is considered the optimal regime for the production of energy through nuclear fusion for industrial purposes since it allows to increase the energy confinement time of the plasma roughly by a factor of two. Consequently, it has been selected at the moment as the standard scenario for the next generation of devices, such as ITER. However, pressure-driven edge instabilities, known as edge localized modes (ELMs), are a distinct feature of this plasma regime. Their extrapolated thermal and particle peak loads on the plasma-facing components (PFC) of the next generation of devices are expected to be so high as to damage such structures, compromising the normal operations of the reactors themselves. Consequently, the induced loads have to be controlled; this can be achieved by mitigating ELMs. A possibility then lays in increasing the ELMs frequency to lower the loads on the PFCs. As already demonstrated at JET, the pellet pacing of ELMs is considered one of the most promising techniques for such scope, and its optimization is therefore of great interest for present and future operations of nuclear fusion facilities. In this work, we suggest a method to access primary pieces of information to perform statistics, assess and characterize the pacing efficiency. The method, tested on JET data, is based on the clustering (k-means) of convoluted signals, using so-called spectrogram cross-correlation, between the measured pellets and ELMs time traces. Results have also been obtained by taking advantage of a new type of diagnostic for measuring the ELMs dynamic, based on synthetic diamond sensors, faster than the standard spectroscopic cameras used at JET. [ABSTRACT FROM AUTHOR]