Search

Lithium‐sulfur (Li−S) batteries are one of the most potential new energy storage systems due to their high theoretical capacity (1675 mAh g−1) and high energy density (2600 Wh kg−1). However, the application of Li−S batteries is currently restricted due to the dissolution of polysulfides in the electrolyte, which leads to the shuttle effect of lithium polysulfides (LiPSs). Here, we present a Co@MXene‐derived TiO2 heterostructure decorated on carbon sheets derived from folic acid (Co@M‐TiO2/C) as a functional separator coating to trap polysulfide and accelerate redox kinetics in Li−S batteries. The interconnected porous structure with good electrical conductivity of the heterostructure boasts rapid ion diffusion and efficient electron transfer within the battery. By attaching Co and MXene‐derived dual‐phased TiO2 to two‐dimensional carbon sheets, heterostructures are formed, ensuring complete exposure of the active sites. These heterostructures exhibit catalytic effects on LiPSs and excellent adsorption capabilities, effectively inhibiting the shuttle effect and accelerating the redox kinetics. Considering these advantages, the Li−S battery with the optimized Co@M‐TiO2/C modified separator demonstrates a high specific capacity of 1481.7 mAh g−1 at 0.2 C, superior rate performance of 855.5 mAh g−1 at 2 C, and excellent cycling performance under a high sulfur load of 4.4 mg cm−2. [ABSTRACT FROM AUTHOR]

Sodium (Na) metal anodes are promising candidates for various batteries with high energy density and high‐power density, however, the dendrite growth of Na metal is impeding their practical applications. The binary alloy Na–K is in the liquid state at room temperature with a wide composition range, which renders it inherently free from solid dendrite growth. Whereas the application of Na–K alloy is plagued by the lack of a wettable matrix to immobilize the liquid metal. Herein, a facile method is reported to introduce oxygen‐rich functional groups into carbon fiber cloth (O‐CFC), which is initially Na–K phobic yet turns into superwetting after the treatment. The superwetting behavior of the O‐CFC can be attributed to the favorable enthalpy changes as a result of the introduction of O‐rich functional groups. The superwetting property of the O‐CFC exhibits good universality, which can be extended to melting Na and K metals. By adopting the superwetting O‐CFC as a host for liquid Na–K alloy, the liquid metal can be well retained in the matrix and deliver a stable cycling for >1600 h. The concept of enthalpy‐driven wettability regulation can be enlightening for the host material design of other liquid metals and alloys. [ABSTRACT FROM AUTHOR]

Direct production of high-purity ethylene from acetylene using renewable energy through electrocatalytic semi-hydrogenation presents a promising alternative to traditional thermocatalytic processes. However, the low conversion of acetylene results in a significant amount of acetylene impurities in the product, necessitating additional purification steps. Herein, a tandem electrocatalytic system that integrates acetylene electrolyzer and zinc-acetylene battery units for high-purity ethylene production is designed. The ultrathin CuO nanoribbons with enriched oxygen vacancies (CuO 1-x NRs) as electrocatalysts achieve a remarkable 93.2% Faradaic efficiency of ethylene at an ampere-level current density of 1.0 A cm -2 in an acetylene electrolyzer, and the power density reaches 3.8 mW cm -2 in a zinc-acetylene battery under acetylene stream. Moreover, the tandem electrocatalysis system delivers a single-pass acetylene conversion of 99.998% and ethylene selectivity of 96.1% at a high current of 1.4 A. Experimental data and calculations demonstrate that the presence of oxygen vacancies accelerates water dissociation to produce active hydrogen atoms while preventing the over-hydrogenation of ethylene. Furthermore, techno-economic analysis reveals that the tandem system can dramatically reduce the overall ethylene production cost compared to the conventional thermocatalytic processes. A novel strategy for complete acetylene-to-ethylene conversion under mild conditions, establishing a non-petroleum route for the production of ethylene is reported., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

The high energy density and cost-effectiveness of chloride-ion batteries (CIBs) make them promising alternatives to lithium-ion batteries. However, the development of CIBs is greatly restricted by the lack of compatible electrolytes to support cost-effective anodes. Herein, we present a rationally designed solid polycationic electrolyte (SPE) to enable room-temperature chloride-ion batteries utilizing aluminum (Al) metal as an anode. This SPE endows the CIB configuration with improved air stability and safety (i.e. free of flammability and liquid leakage). A high ionic conductivity (1.3×10 -2  S cm -1 at 25 °C) has been achieved by the well-tailored coordination structure of the SPE. Meanwhile, the solid polycationic electrolyte ensures stable electrodes|electrolyte interfaces, which effectively inhibit the growth of dendrites on the Al anodes and degradation of the FeOCl cathodes. The Al|SPE|FeOCl chloride-ion batteries showcased a high discharge capacity around 250 mAh g -1 (based on the cathodes) and extended lifespan. Our electrolyte design opens a new avenue for developing low-cost chloride-ion batteries., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)