Search

The aim of this study was to evaluate whether a system involving ozonated water and ultrasound causes de-epithelization of the human amniotic membrane (HAM). The experiment protocol was carried out in four stages. Stage I was carried out to determine the duration of the experiment. Stage II comprised the first experiment, involving four groups of samples studied in triplicate: control/natural (IN), processed with ultrasound in a liquid medium (US), processed with ozonated water (O3), and processed with ozonated water combined with ultrasound (US_O3). Stage III was performed to confirm the results, following the same steps present in Stage II. Stage IV involved the use of oxygen to confirm the hypothesis. Histological analysis was carried out to verify whether the effects of O2 were similar to those of O3. The system was activated, and ozonation was carried out for 10 min, as in the previous experiment, reaching a concentration level of 3.0 mg/L. The samples were submerged and positioned in the reservoir and processed separately for 55 min. The biochemical properties were assessed using Fourier transform infrared spectroscopy, and the morphology was examined using histology and scanning electron microscopy. The spectra of the samples exhibited similarities; however, subtle changes were highlighted, such as smooth band shifts and intensity changes. The morphology indicated that ultrasound achieved more efficient HAM de-epithelialization compared to ultrasound combined with ozonated water and ozonated water alone. One plausible hypothesis for this observation is that cavitation represents the primary mechanism responsible for de-epithelialization. When ultrasound is combined with ozone, the bubbles generated by ozone gas reduce the cavitation effect. This study is pioneering as it demonstrates an ultrasound system capable of the efficient de-epithelialization of the HAM. [ABSTRACT FROM AUTHOR]

Copyright of Brazilian Journal of Production Engineering / Revista Brasileira de Engenharia de Produção is the property of Brazilian Journal of Production Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of GeSec: Revista de Gestao e Secretariado is the property of Sindicato das Secretarias e Secretarios do Estado de Sao Paulo (SINSESP) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of GeSec: Revista de Gestao e Secretariado is the property of Sindicato das Secretarias e Secretarios do Estado de Sao Paulo (SINSESP) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This work reports an optomechanical, electronic system consisting of LEDs emitting light in the near-infrared region. The 147 light-emitting diodes were distributed in a semi-spherical dome so that each focused light upon the center of the radius. The LEDs received electrical polarization so that the optical power of each provided 16 ± 0.36 mW for a total of 2.4 W. The developed system allows multifunctional applications in phototherapy, making it possible to perform this clinical technique for the treatment of skin lesions and contusions at the musculoskeletal level. The geometry of the developed system also allows the use of phototherapy in the treatment of neurological pathologies. In terms of instrumentation, the three-dimensional light intensity distribution and the thermographic images were obtained using three working distances from the system to the target. Three-dimensional light intensity distributions were obtained considering each working distance. These were inserted in the thermographic images as indications of the emitted temperature distributions. This work verified that the optomechanical and electronic system developed with LEDs may be used for multiple applications in phototherapy. [ABSTRACT FROM AUTHOR]

Human amniotic membrane (hAM) has a great potential in regenerative medicine as it can be disinfected, preserved, and stored. The present study evaluated a hydrodynamic system that uses ozonated water for disinfecting hAM and assessed possible morphological alterations using histological analysis and scanning electron microscopy (SEM). hAM fragments were experimentally contaminated with Staphylococcus aureus (103 CFU/mL) and submitted to disinfection processes for 5, 10 and 15 minutes (1.95, 3.9 and 5.85 mg/cm2 (O3), respectively). The results of the water microbiological analysis showed that no microbial growth was detected in all water samples. The hAM surface monitoring with swab method and the analysis of fragment inoculated directly into the culture media revealed that no microbial growth was detected after 10 and 15 minutes. The SEM and histological analysis of hAM revealed that morphological alterations in the epithelium began after 10 minutes 3.9 mg/cm2 (O3) of the disinfection process, and significant changes in the epithelial cells were observed after 15 minutes (5.85 mg/cm2 (O3)). These findings indicates that the structural integrity of hAM was maintained during the process and suggest that the technique is a promising system to disinfect this biological material. [ABSTRACT FROM AUTHOR]

Ethylene oxide and gamma irradiation are two well-established sterilizing processes for surgical materials; however, they present toxicity and high cost, respectively. Ozone Gas, O3(g), has been used effectively for disinfection and sterilization. Low pressure (LP) can promote water vaporization whenever the vapor pressure drops below the water saturation pressure, which at 20 °C (experimental temperature) is 2337 Pa. The microorganism used to contaminate the surgical needles (SN) was Staphylococcus aureus, a gram-positive bacterium whose cytoplasm is mostly water. Sixty SN samples were divided into six groups of 10: negative control (sterile SN), positive control (experimentally contaminated SN), LP group, two groups associating LP and O3(g), and O3(g) alone group. The CFU/mL count demonstrated microbicide efficacy of LP+O3(g) and O3(g) groups. This is an innovative protocol for microbial inactivation, mainly because of LP application. In the future, this technique can be evaluated for sterilization of SN and other medical devices. [ABSTRACT FROM AUTHOR]