Search

A proton magnetic resonance spectroscopy (MRS) technique was used to measure 13C enrichments of glutamate and glutamine in a 3.5 × 1.8 × 2 cm3 voxel placed in the dorsal anterior cingulate cortex of five healthy participants after oral administration of [U-13C]glucose. Strong pseudo singlets of glutamate and glutamine were induced to enhance the signal strength of glutamate and glutamine. This study demonstrated that 13C labeling of glutamate and glutamine can be measured with the high sensitivity and spatial resolution of 1H MRS using a proton-only MRS technique with standard commercial hardware. Furthermore, it is feasible to measure 13C labeling of glutamate and glutamine in limbic structures, which play major roles in behavioral and emotional responses and whose abnormalities are involved in many neuropsychiatric disorders. [ABSTRACT FROM AUTHOR]

The lithium-ion cathode material olivine LiFePO4 (LFP) has been synthesized for the first time from natural paleozoic iron carbonate (FeCO3). The ferrous carbonate starting material consists of the mineral siderite at about 92 wt. % purity. Because FeCO3 has divalent iron, the reaction with lithium dihydrogen phosphate (LiH2PO4) provides a unique method to develop iron-(II) containing LFP in an inert atmosphere. Since siderite FeCO3 is a common mineral that can be directly mined, it may, therefore, provide an inexpensive route for the production of LFP. After carbon-coating, the LFP yields a capacity in the range of 80–110 mAh g−1LFP (in one chosen specimen sample), which is lower than commercially available LiFePO4 (150–160 mAh g−1LFP). However, the tap density of LFP derived from siderite is noticeably high at 1.65 g cm−3. The material is likely to be improved with powder purification, nanosized processing, and more complete carbon-coating coverage with increased optimization. [ABSTRACT FROM AUTHOR]

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes. [ABSTRACT FROM AUTHOR]

The article presents a study which explores the theory-guided experimental design in battery materials research . It mentions the efforts in coupling machine learning with high-throughput computations and experiments and recommendations for effective collaboration between theorists and experimentalists.

Single-phase three-dimensional vanadium oxide (V 4 O 9 ) was synthesized by reduction of V 2 O 5 using a gas stream of ammonia/argon (NH 3 /Ar). The as-synthesized oxide, prepared by this simple gas reduction method was subsequently electrochemically transformed into a disordered rock salt type-"Li3.7V4O9" phase while cycling over the voltage window 3.5 to 1.8 V versus Li. The Li-deficient phase delivers an initial reversible capacity of ∼260 mAhg -1 at an average voltage of 2.5 V vs. Li + /Li 0 . Further cycling to 50 cycles yields a steady 225 mAhg -1 . Ex situ X-ray diffraction studies confirmed that (de) intercalation phenomena follows a solid-solution electrochemical reaction mechanism. As demonstrated, the reversibility and capacity utilization of this V 4 O 9 is found to be superior to battery grade, micron-sized V 2 O 5 cathodes in lithium cells., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Senguttuvan, Lee, Key and Johnson.)

Realization of practical sodium metal batteries (SMBs) is hindered due to lack of compatible electrolyte components, dendrite propagation, and poor understanding of anodic interphasial chemistries. Chemically robust liquid electrolytes that facilitate both favorable sodium metal deposition and a stable solid-electrolyte interphase (SEI) are ideal to enable sodium metal and anode-free cells. Herein we present advanced characterization of a novel fluorine-free electrolyte utilizing the [HCB 11 H 11 ] 1- anion. Symmetrical Na cells operated with this electrolyte exhibit a remarkably low overpotential of 0.032 V at a current density of 2.0 mA cm -2 and a high coulombic efficiency of 99.5 % in half-cell configurations. Surface characterization of electrodes post-operation reveals the absence of dendritic sodium nucleation and a surprisingly stable fluorine-free SEI. Furthermore, weak ion-pairing is identified as key towards the successful development of fluorine-free sodium electrolytes., (© 2022 Wiley-VCH GmbH.)