Search

Abstract Aqueous zinc‐ion batteries (AZIBs) based on vanadium oxides or sulfides are promising candidates for large‐scale rechargeable energy storage due to their ease of fabrication, low cost, and high safety. However, the commercial application of vanadium‐based electrode materials has been hindered by challenging problems such as poor cyclability and low‐rate performance. To this regard, sophisticated nanostructure engineering technology is used to adeptly incorporate VS2 nanosheets into the MXene interlayers to create a stable 2D heterogeneous layered structure. The MXene nanosheets exhibit stable interactions with VS2 nanosheets, while intercalation between nanosheets effectively increases the interlayer spacing, further enhancing their stability in AZIBs. Benefiting from the heterogeneous layered structure with high conductivity, excellent electron/ion transport, and abundant reactive sites, the free‐standing VS2/Ti3C2Tz composite film can be used as both the cathode and the anode of AZIBs. Specifically, the VS2/Ti3C2Tz cathode presents a high specific capacity of 285 mAh g−1 at 0.2 A g−1. Furthermore, the flexible Zn‐metal free in‐plane VS2/Ti3C2Tz//MnO2/CNT AZIBs deliver high operation voltage (2.0 V) and impressive long‐term cycling stability (with a capacity retention of 97% after 5000 cycles) which outperforms almost all reported Vanadium‐based electrodes for AZIBs. The effective modulation of the material structure through nanocomposite engineering effectively enhances the stability of VS2, which shows great potential in Zn2+ storage. This work will hasten and stimulate further development of such composite material in the direction of energy storage.

Abstract Seed density per silique (SDPS) and valid silique length (VSL) are two important yield-influencing traits in rapeseed. SDPS has a direct or indirect effect on rapeseed yield through its effect on seed per silique. In this study, a quantitative trait locus (QTL) for SDPS was detected on chromosome A09 using the QTL-seq approach and confirmed via linkage analysis in the mapping population obtained from 4263 × 3001 cross. Furthermore, one major QTL for SDPS (qSD.A9-1) was mapped to a 401.8 kb genomic interval between SSR markers Nys9A190 and Nys9A531. In the same genomic region, a QTL (qSL.A9) linked to VSL was also detected. The phenotypic variation of qSD.A9-1 and qSL.A9 was 53.1% and 47.6%, respectively. Results of the additive and dominant effects demonstrated that the expression of genes controlling SDPS and VSL were derived from a different parent in this population. Subsequently, we identified 56 genes that included 45 specific genes with exonic (splicing) variants. Further analysis identified specific genes containing mutations that may be related to seed density as well as silique length. These genes could be used for further studies to understand the details of these traits of rapeseed.

Plant cuticular wax is the covering of the outer layer of the plant. It forms a protective barrier on the epidermis of plants and plays a vital role like a safeguard from abiotic and biotic stresses. In the present study, Brassica napus L. materials with and without wax powder were observed. Genetic analysis showed that the separation ratio of waxy plants to waxless plants was 15:1 in the F2 population, which indicated that the wax powder formation was controlled by two pairs of genes. In order to identify the candidate genes associated with the wax powder trait of B. napus L., bulked segregant analysis (BSA) was performed. The homozygous waxy plants, the homozygous waxless plants, and plants from three parents were selected for establishing five DNA pools for genome-wide resequencing. The results of the resequencing showed that the site associated with wax powder trait was located in the region of 590,663–1,657,546 bp on chromosome A08. And 48 single nucleotide polymorphisms (SNPs) were found between the DNA sequences of waxy plants and waxless plants in this region. These SNPs were distributed across 16 gene loci. qRT-PCR analysis was conducted for the 16 candidate genes and three genes (BnaA08g01070D, BnaA08g02130D, and BnaA08g00890D) showed significantly differential expression between waxy and waxless parents. BnaA08g01070D and BnaA08g02130D were significantly down-regulated in the waxless parent, while BnaA08g00890D was significantly up-regulated in the waxless parent. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses revealed that the BnaA08g02130D gene was enriched in lipid biosynthetic or metabolic processes. All the results in our study would provide valuable clues for exploring the genes involved in wax powder development.

Abstract Background Brassica napus is the third leading source of edible oil in the world. Genic male sterility (GMS) lines provide crucial material for harnessing heterosis for rapeseed. GMS lines have been used successfully for rapeseed hybrid production in China. MicroRNAs (miRNAs) play crucial regulatory roles in various plant growth, development, and stress response processes. However, reports on miRNAs that regulate the pollen development of GMS lines in B. napus are few. Results In this study, 12 small RNA and transcriptome libraries were constructed and sequenced for the flower buds from the fertile and sterile lines of two recessive GMS (RGMS) lines, namely, “6251AB” and “6284AB”. At the same time, 12 small RNA and transcriptome libraries were also constructed and sequenced for the flower buds from the fertile and sterile lines of two dominant GMS (DGMS) lines, namely, “4001AB” and “4006AB”. Based on the results, 46 known miRNAs, 27 novel miRNAs on the other arm of known pre-miRNAs, and 44 new conserved miRNAs were identified. Thirty-five pairs of novel miRNA-3p/miRNA-5p were found. Among all the identified miRNAs, fifteen differentially expressed miRNAs with over 1.5-fold change between flower buds of sterile and fertile lines were identified, including six differentially expressed miRNAs between “4001A” and “4001B”, two differentially expressed miRNAs between “4006A” and “4006B”, four differentially expressed miRNAs between “6251A” and “6251B”, and ten differentially expressed miRNAs between “6284A” and “6284B”. The correlation analysis of small RNA and transcriptome sequencing was conducted. And 257 candidate target genes were predicted for the 15 differentially expressed miRNAs. The results of 5′ modified RACE indicated that BnaA09g48720D, BnaA09g11120D, and BnaCnng51960D were cleaved by bna-miR398a-3p, bna-miR158-3p and bna-miR159a, respectively. Among the differentially expressed miRNAs, miR159 was chosen to analyze its function. Overexpression of bna-miR159 in Arabidopsis resulted in decreased seed setting rate, and shortened siliques, illustrating that miR159 may regulate the fertility and silique development in rapeseed. Conclusions Our findings provide an overview of miRNAs that are potentially involved in GMS and pollen development. New information on miRNAs and their related target genes are provided to exploit the GMS mechanism and reveal the miRNA networks in B. napus.

Rapeseed is the third leading source of edible oil in the world. Genic male sterility (GMS) lines provide crucial material for harnessing heterosis for rapeseed. GMS lines have been widely used successfully for rapeseed hybrid production. The physiological and molecular mechanism of pollen development in GMS lines of rapeseed (Brassica napus L.) need to be determined for the creation of hybrids and cultivation of new varieties. However, limited studies have focused on systematically mining genes that regulate the pollen development of GMS lines in B. napus. In the present study, to determine the stage at which pollen development begins to show abnormality in the GMS lines, we performed semi-thin section analysis of the anthers with five pollen development stages. The results indicated that the abnormal pollen development in DGMS lines might start at the meiotic stage, and abnormal pollen development in RGMS lines probably occurred before the tetrad stage. To investigate the critical genes and pathways involved in pollen development in GMS lines, we constructed and sequenced 24 transcriptome libraries for the flower buds from the fertile and sterile lines of two recessive GMS (RGMS) lines (6251AB and 6284AB) and two dominant GMS (DGMS) lines (4001AB and 4006AB). A total of 23,554 redundant DEGs with over two-fold change between sterile and fertile lines were obtained. A total of 346 DEGs were specifically related to DGMS, while 1,553 DEGs were specifically related to RGMS. A total of 1,545 DEGs were shared between DGMS and RGMS. And 253 transcription factors were found to be differentially expressed between the sterile and fertile lines of GMS. In addition, 6,099 DEGs possibly related to anther, pollen, and microspore development processes were identified. Many of these genes have been reported to be involved in anther and microspore developmental processes. Several DEGs were speculated to be key genes involved in the regulation of fertility. Three differentially expressed genes were randomly selected and their expression levels were verified by quantitative PCR (qRT-PCR). The results of qRT-PCR largely agreed with the transcriptome sequencing results. Our findings provide a global view of genes that are potentially involved in GMS occurrence. The expression profiles and function analysis of these DEGs were provided to expand our understanding of the complex molecular mechanism in pollen and sterility development in B. napus.

Previous research has shown that miR398 contributed to plant thermotolerance by silencing its target gene COPPER/ZINC SUPEROXIDE DISMUTASE1 (CSD1) in Arabidopsis thaliana. However, the phylogenesis of miR398 and CSD1 in Brassica crop and their role in regulating leaf cell death under heat stress remains unexplored. Here, we characterized the homologous genes of miR398a and CSD1 in Brassica rapa ssp. pekinensis (Chinese cabbage) and found miR398a abundance was accumulated under heat stress (38 °C and 46 °C for 1 h) in Chinese cabbage, while the expression level of its targets BraCSD1-1 and BraCSD2-1 were downregulated. To further explore their role in heat response, we constructed the transgenic plants overexpressing artificial miR398a (aBra-miR398a), Bra-miR398a target mimic (Bra-MIM398a), and BraCSD1-1 in Chinese cabbage for genetic study. Under high temperatures, p35S::aBra-miR398a lines reduced the areas of leaf cell death and delayed the leaf cell death. By contrast, p35S::Bra-MIM398a and p35S::BraCSD1-1 plants enlarged the areas of leaf cell death and displayed the earliness of leaf cell death. Finally, we found that the expression level of stress-responsive genes BraLEA76, BraCaM1, BraPLC, BraDREB2A, and BraP5CS increased in transgenic plants overexpressing aBra-miR398a, which may contribute to their resistance to heat-induced leaf cell death. Taken together, these results revealed the function of Bra-miR398a in attenuating leaf cell death to ensure plant thermotolerance, indicating that the miR398-CSD1 module could be potential candidates for heat-resistant crop breeding.