Search

The hybridization of single-walled carbon nanotubes (SWCNTs) and Cu nanoparticles offers a promising strategy for creating highly conductive and mechanically stable fillers for flexible printed electronics. In this study, we report the ultrafast synthesis of SWCNT/Cu hybrid nanostructures and the fabrication of flexible electrodes under ambient conditions through a laser-induced photo-thermal reaction. Thermal energy generated from the nonradiative relaxation of the π-plasmon resonance of SWCNTs was utilized to reduce the Cu-complex (known as a metal–organic decomposition ink) into Cu nanoparticles. We systematically investigated the effects of SWCNT concentration and output laser power on the structural and electrical properties of the SWCNT/Cu hybrid electrodes. The SWCNT/Cu electrodes achieved a minimum electrical resistivity of 46 μohm·cm, comparable to that of the metal-based printed electrodes. Mechanical bending tests demonstrated that the SWCNT/Cu electrodes were highly stable and durable, with no significant deformation observed even after 1000 bending cycles. Additionally, the electrodes showed rapid temperature increases and stable Joule heating performance, reaching temperatures of nearly 80 °C at an applied voltage of less than 3.5 V. [ABSTRACT FROM AUTHOR]

The efficient dispersion of single-walled carbon nanotubes (SWCNTs) has been the subject of extensive research over the past decade. Despite these efforts, achieving individually dispersed SWCNTs at high concentrations remains challenging. In this study, we address the limitations associated with conventional methods, such as defect formation, excessive surfactant use, and the use of corrosive solvents. Our novel dispersion method utilizes the spontaneous charging of SWCNTs in a solvated electron system created by dissolving potassium in hexamethyl phosphoramide (HMPA). The resulting charged SWCNTs (c-SWCNTs) can be directly dispersed in the charging medium using only magnetic stirring, leading to defect-free c-SWCNT dispersions with high concentrations of up to 20 mg/mL. The successful dispersion of individual c-SWCNT strands is confirmed by their liquid-crystalline behavior. Importantly, the dispersion medium for c-SWCNTs exhibits no reactivity with metals, polymers, or other organic solvents. This versatility enables a wide range of applications, including electrically conductive free-standing films produced via conventional blade coating, wet-spun fibers, membrane electrodes, thermal composites, and core-shell hybrid microparticles. [ABSTRACT FROM AUTHOR]

BACKGROUND: Development of a rapid and accurate detection method for a pine wilt disease (PWD) biomarker is crucial to prevent the spread of this disease in forests. In this study, we produced a recombinant minibody‐type antibody against Bursaphelenchus xylophilus peroxiredoxin (BxPrx), which is a protein secreted by the PWD‐causing B. xylophilus pathogen. Results: We labeled the anti‐BxPrx minibody using two different fluorescent dyes, Alexa Fluor (AF) 488 and AF647, and established a fluorescence‐linked immunosorbent assay (FLISA) system using these probes. Both fluorescent minibodies showed limit of detection values of 10.2 and 14.6 ng for the AF488‐ and AF647‐labeled antibodies, respectively, suggesting the usefulness of these probes for FLISA‐based sensitive detection of BxPrx. Conclusion: The entire duration for performing FLISA was 3 h, and enzyme‐conjugated secondary antibody incubation, washing and enzymatic reaction steps were not required, which was comparable to traditional ELISA. Both AF488‐ and AF647‐labeled minibodies showed high sensitivity, suggesting that these probes are useful for various fluorescence measurement techniques, which typically use green or red filters. © 2023 Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

Staphylococcus aureus is a major pathogen that causes infections and life-threatening diseases. Although antibiotics, such as methicillin, have been used, methicillin-resistant S. aureus (MRSA) causes high morbidity and mortality rates, and conventional detection methods are difficult to be used because of time-consuming process. To control the spread of S. aureus, a development of a rapid and simple detection method is required. In this study, we generated a fluorescent anti-S. aureus antibody, and established a novel fluorescence-linked immunosorbent assay (FLISA)-based S. aureus detection method. The method showed high sensitivity and low limit of detection toward MRSA detection. The assay time for FLISA was 5 h, which was faster than that of conventional enzyme-linked immunosorbent assay (ELISA) or rapid ELISA. Moreover, the FLISA-based detection method was applied to diagnose clinically isolated MRSA samples that required only 5.3 h of preincubation. The FLISA method developed in this study can be widely applied as a useful tool for convenient S. aureus detection. Key points: • A fluorescence-linked immunosorbent assay-based S. aureus detection method • Simultaneous quantification of a maximum of 96 samples within 5 h • Application of the novel system to diagnosis clinical isolates [ABSTRACT FROM AUTHOR]

Staphylococcus aureus is a major pathogen that causes infections and life-threatening diseases. Although antibiotics, such as methicillin, have been used, methicillin-resistant S. aureus (MRSA) causes high morbidity and mortality rates, and conventional detection methods are difficult to be used because of time-consuming process. To control the spread of S. aureus, a development of a rapid and simple detection method is required. In this study, we generated a fluorescent anti-S. aureus antibody, and established a novel fluorescence-linked immunosorbent assay (FLISA)-based S. aureus detection method. The method showed high sensitivity and low limit of detection toward MRSA detection. The assay time for FLISA was 5 h, which was faster than that of conventional enzyme-linked immunosorbent assay (ELISA) or rapid ELISA. Moreover, the FLISA-based detection method was applied to diagnose clinically isolated MRSA samples that required only 5.3 h of preincubation. The FLISA method developed in this study can be widely applied as a useful tool for convenient S. aureus detection. Key points: • A fluorescence-linked immunosorbent assay-based S. aureus detection method • Simultaneous quantification of a maximum of 96 samples within 5 h • Application of the novel system to diagnosis clinical isolates [ABSTRACT FROM AUTHOR]

Quenchbody (Q-body) is a unique, reagentless, fluorescent antibody whose fluorescent intensity increases in an antigen-concentration-dependent manner. Q-body-based homogeneous immunoassay is superior to conventional immunoassays as it does not require multiple immobilization, reaction, and washing steps. In fact, simply mixing the Q-body and the sample containing the antigen enables the detection of the target antigen. To date, various Q-bodies have been developed to detect biomarkers of interest, including haptens, peptides, proteins, and cells. This review sought to describe the principle of Q-body-based immunoassay and the use of Q-body for various immunoassays. In particular, the Q-bodies were classified from a structural perspective to provide useful information for designing Q-bodies with an appropriate objective. [ABSTRACT FROM AUTHOR]

Factor VIII (F8) is a blood coagulation protein prearranged in six domains, and its deficiency causes hemophilia A. To fashion functional F8 therapeutics, development of a recombinant F8 (rF8) domain is essential not only for F8 substitution, but also to decipher the F8-related mechanisms. In this study, we generated Glutathione S-transferase (GST)-conjugated recombinant A2 and A3 domains of F8 using Escherichia coli. The high growth rate and economically advantageous protein production system in terms of inexpensive reagents and materials in E. coli cells facilitated the completion of entire process from protein expression to purification in 3–4 days with low production cost. Subsequent assessment of these purified proteins using enzyme-linked immunosorbent assay (ELISA) and antibodies against F8 revealed enhanced detection of rF8-A2 or rF8-A3 in a concentration dependent manner, indicating the presence of the antibody-binding epitopes in these proteins. Furthermore, these proteins are suitable for generating novel antibodies against the F8 domain and F8 domain-capturing affinity columns by enabling their conjugation to GST-capturing beads. Additionally, the recombinant F8 domains produced herein can be used for various studies, which include investigating the explicit roles of the F8 domain in the coagulation process, with domain-specific binding partners, and antibodies. [ABSTRACT FROM AUTHOR]