Search

Abstract Background How the joints exactly move and interact and how this reflects PD-related gait abnormalities and the response to dopaminergic treatment is poorly understood. A detailed understanding of these kinematics can inform clinical management and treatment decisions. The aim of the study was to investigate the influence of different gait speeds and medication on/off conditions on inter-joint coordination, as well as kinematic differences throughout the whole gait cycle in well characterized pwPD. Methods 29 controls and 29 PD patients during medication on, 8 of them also during medication off walked a straight walking path in slow, preferred and fast walking speeds. Gait data was collected using optical motion capture system. Kinematics of the hip and knee and coordinated hip-knee kinematics were evaluated using Statistical Parametric Mapping (SPM) and cyclograms (angle-angle plots). Values derived from cyclograms were compared using repeated-measures ANOVA for within group, and ttest for between group comparisons. Results PD gait differed from controls mainly by lower knee range of motion (ROM). Adaptation to gait speed in PD was mainly achieved by increasing hip ROM. Regularity of gait was worse in PD but only during preferred speed. The ratios of different speed cyclograms were smaller in the PD groups. SPM analyses revealed that PD participants had smaller hip and knee angles during the swing phase, and PD participants reached peak hip flexion later than controls. Withdrawal of medication showed an exacerbation of only a few parameters. Conclusions Our findings demonstrate the potential of granular kinematic analyses, including > 1 joint, for disease and treatment monitoring in PD. Our approach can be extended to further mobility-limiting conditions and other joint combinations. Trial registration The study is registered in the German Clinical Trials Register (DRKS00022998, registered on 04 Sep 2020).

Abstract Predictors of rebound after correction of coronal plane deformities using temporary hemiepiphysiodesis (TH) are not well defined. The following research questions were tested: (1) Is the dynamic knee joint load useful to improve rebound prediction accuracy? (2) Does a large initial deformity play a critical role in rebound development? (3) Are BMI and a young age risk factors for rebound? Fifty children and adolescents with idiopathic knee valgus malalignment were included. A deviation of the mechanical femorotibial angle (MFA) of ≥ 3° into valgus between explantation and the one-year follow-up period was chosen to classify a rebound. A rebound was detected in 22 of the 50 patients (44%). Two predictors of rebound were identified: 1. reduced peak lateral knee joint contact force in the first half of the stance phase at the time of explantation (72.7% prediction); 2. minor initial deformity according to the MFA (70.5% prediction). The best prediction (75%) was obtained by including both parameters in the binary logistic regression method. A TH should not be advised in patients with a minor initial deformity of the leg axis. Dynamic knee joint loading using gait analysis and musculoskeletal modeling can be used to determine the optimum time to remove the plates.

Aims: Accurate skeletal age and final adult height prediction methods in paediatric orthopaedics are crucial for determining optimal timing of growth-guiding interventions and minimizing complications in treatments of various conditions. This study aimed to evaluate the accuracy of final adult height predictions using the central peak height (CPH) method with long leg X-rays and four different multiplier tables. Methods: This study included 31 patients who underwent temporary hemiepiphysiodesis for varus or valgus deformity of the leg between 2014 and 2020. The skeletal age at surgical intervention was evaluated using the CPH method with long leg radiographs. The true final adult height (FHTRUE) was determined when the growth plates were closed. The final height prediction accuracy of four different multiplier tables (1. Bayley and Pinneau; 2. Paley et al; 3. Sanders – Greulich and Pyle (SGP); and 4. Sanders – peak height velocity (PHV)) was then compared using either skeletal age or chronological age. Results: All final adult height predictions overestimated the FHTRUE, with the SGP multiplier table having the lowest overestimation and lowest absolute deviation when using both chronological age and skeletal age. There were no significant differences in final height prediction accuracy between using skeletal age and chronological age with PHV (p = 0.652) or SGP multiplier tables (p = 0.969). Adult height predictions with chronological age and SGP (r = 0.769; p ≤ 0.001), as well as chronological age and PHV (r = 0.822; p ≤ 0.001), showed higher correlations with FHTRUE than predictions with skeletal age and SGP (r = 0.657; p ≤ 0.001) or skeletal age and PHV (r = 0.707; p ≤ 0.001). Conclusion: There was no significant improvement in adult height prediction accuracy when using the CPH method compared to chronological age alone. The study concludes that there is no advantage in routinely using the CPH method for skeletal age determination over the simple use of chronological age. The findings highlight the need for more accurate methods to predict final adult height in contemporary patient populations. Cite this article: Bone Jt Open 2023;4(10):750–757.

BackgroundThe accurate estimation of residual growth is crucial for the appropriate timing of growth-guiding surgery in patients with axial leg deviations. Skeletal age methods such as the Modified and the Abbreviated Modified Fels Knee System were developed on historical patient cohorts and the applicability to the modern pediatric population with axial leg deviation has not yet been evaluated.Questions/purposesAre both final adult height prediction methods (the Modified Fels Knee System (FKS) and the Abbreviated Modified Fels Knee System (aFKS)) accurate to determine SA and the final adult height on long leg radiographs in patients with axial leg deviations?Which multiplier table shows highest association between predicted and true final adult body height?Do FKS- and aFKS- skeletal age determination methods improve final adult body height prediction accuracy compared to the simple use of chronological age?MethodsA single center, retrospective study of 31 patients who underwent temporary hemiepiphysiodesis due to axial leg deviations in the frontal plane between 2018 and 2020 was conducted. Skeletal age at the time of surgery was determined on an anterior-posterior long leg X-ray using FKS and aFKS. Adult height predictions were calculated using three different multiplier tables (Paley et al., Sanders-Greulich and Pyle (SGP), Sanders-Peak Height Velocity (PHV)). The accuracy of adult height prediction was determined by comparing the mean differences and mean absolute differences between predicted and true adult height.ResultsAll adult height predictions overestimated the true adult height. The final height prediction using aFKS and the SGP multiplier showed the lowest overestimation (mean 3.2 cm, SD 5.5 cm). The PHV multiplier table showed the highest correlation between predicted and true adult height (FHPRE_FKS_PHV: r = 0.913, p < 0.001 and FHPRE_aFKS_PHV: r = 0.862, p < 0.001). The simple use of chronological age at the time of surgical intervention (CASI) with the Paley multiplier table showed the highest median delta absolute values and lowest correlations with true adult height (median 7.4 cm, 25%-75% percentile: 3.5-10.0 cm, r = 0.838, p < 0.001). Nevertheless, no significant differences in delta absolute values between various adult height predictions methods could be shown.ConclusionsOverall, the results of the present retrospective cohort study show that there was no significant improvement in final height prediction accuracy when using the FKS or the aFKS method compared to the simple use of chronological age. One reason could be that patients with varus/valgus malalignment have specific growth characteristics that are not accounted for in multiplier tables or the FKS and aFKS method. Since there is no significant difference in prediction accuracy between the methods, the choice of method may depend on other factors, such as clinical preference or availability of resources. However, due to the small sample size, the study cannot definitively rule out potential differences between the prediction methods, and larger studies are required to validate these findings.

Abstract Compressive knee joint contact force during walking is thought to be related to initiation and progression of knee osteoarthritis. However, joint loading is often evaluated with surrogate measures, like the external knee adduction moment, due to the complexity of computing joint contact forces. Statistical models have shown promising correlations between medial knee joint contact forces and knee adduction moments in particularly in individuals with knee osteoarthritis or after total knee replacements (R 2 = 0.44–0.60). The purpose of this study was to evaluate how accurately model-based predictions of peak medial and lateral knee joint contact forces during walking could be estimated by linear mixed-effects models including joint moments for children and adolescents with and without valgus malalignment. Peak knee joint moments were strongly correlated (R 2 > 0.85, p

Abstract Background Malalignments of the lower extremity are common reasons for orthopedic consultation because it may lead to osteoarthritis in adulthood. An accurate and reliable radiological assessment of lower limb alignment in children and adolescents is essential for clinical decision-making on treatment of limb deformities and for regular control after a surgical intervention. Objective First, does the analysis of full-length standing anteroposterior radiographs show a good intra- and interobserver reliability? Second, which parameter is most susceptible to observer-dependent errors? Third, what is the Standard Error of Measurement (SEM95%) of the absolute femoral and tibial length? Methods Two observers evaluated digital radiographs of 144 legs from 36 children and adolescents with pathological valgus alignment before a temporary hemiepiphysiodesis and before implant removal. Parameters included Mechanical Femorotibial Angle (MFA), Mechanical Axis Deviation (MAD), mechanical Lateral Distal Femoral Angle (mLDFA), mechanical Medial Proximal Tibial Angle (mMPTA), mechanical Lateral Proximal Femoral Angle (mLPFA), mechanical Lateral Distal Tibial Angle (mLDTA), Joint Line Convergence Angle (JLCA), femur length, tibial length. Intra- and interobserver reliability (ICC2,1), SEM95% and proportional errors were calculated. Results The intra- and interobserver reliability for almost all measurements was found to be good to excellent (Intra-ICC2,1: 0.849–0.999; Inter-ICC2,1: 0.864–0.996). The SEM95% of both observers was found to be ± 1.39° (MFA), ± 3.31 mm (MAD), ± 1.06° (mLDFA) and ± 1.29° (mMPTA). The proportional error of MAD and MFA is comparable (47.29% vs. 46.33%). The relevant knee joint surface angles show a lower proportional error for mLDFA (42.40%) than for mMPTA (51.60%). JLCA has a proportional error of 138%. Furthermore, the SEM95% for the absolute values of the femoral and tibial length was 4.53 mm for the femur and 3.12 mm for the tibia. Conclusions In conclusion, a precise malalignment measurement and the knowledge about SEM95% of the respective parameters are crucial for correct surgical or nonsurgical treatment. The susceptibility to error must be considered when interpreting malalignment analysis and must be considered when planning a surgical intervention. The results of the present study elucidate that MAD and MFA are equally susceptible to observer-dependent errors. This study shows good to excellent intra- and interobserver ICCs for all leg alignment parameters and joint surface angles, except for JLCA. Trial registration: This study was registered with DRKS (German Clinical Trials Register) under the number DRKS00015053. Level of evidence I, Diagnostic Study.

Introduction: Correction of knee malalignment by guided growth using a tension-band plate is a common therapy to prevent knee osteoarthritis among other things. This approach is based on the Hueter-Volkmann law stating that the length growth of bones is inhibited by compression and stimulated by tension. How the locally varying mechanical loading of the growth plate is influenced by the implant has not yet been investigated. This study combines load cases from the gait cycle with personalized geometry in order to investigate the mechanical influence of the tension-band plates.Methods: Personalized finite element models of four distal femoral epiphyses of three individuals, that had undergone guided growth, were generated. Load cases from the gait cycles and musculoskeletal modelling were simulated with and without implant. Morphological features of the growth plates were obtained from radiographs. 3D geometries were completed using non-individual Magnetic Resonance Images of age-matched individuals. Boundary conditions for the models were obtained from instrumented gait analyses.Results: The stress distribution in the growth plate was heterogenous and depended on the geometry. In the insertion region, the implants locally induced static stress and reduced the cyclic loading and unloading. Both factors that reduce the growth rate. On the contralateral side of the growth plate, increased tension stress was observed, which stimulates growth.Discussion: Personalized finite element models are able to estimate the changes of local static and cyclic loading of the growth plate induced by the implant. In future, this knowledge can help to better control growth modulation and avoid the return of the malalignment after the treatment. However, this requires models that are completely participant-specific in terms of load cases and 3D geometry.

The correction of valgus leg malalignment in children using implant-mediated growth guidance is widely used and effective. Despite the minimal invasive character of the procedure, a relevant number of patients sustain prolonged pain and limited mobility after temporary hemiepiphysiodesis. Our aim was to investigate implant-associated risk factors (such as implant position and screw angulation), surgical- or anesthesia-related risk factors (such as type of anesthesia, use, and duration), and pressure of tourniquet or duration of surgery for these complications. Thirty-four skeletally immature patients with idiopathic valgus deformities undergoing hemiepiphysiodesis plating from October 2018–July 2022 were enrolled in this retrospective study. Participants were divided into groups with and without prolonged complications (persistent pain, limited mobility of the operated knee between five weeks and six months) after surgery. Twenty-two patients (65%) had no notable complications, while twelve patients (35%) had prolonged complications. Both groups differed significantly in plate position relative to physis (p = 0.049). In addition, both groups showed significant differences in the distribution of implant location (p = 0.016). Group 1 had a shorter duration of surgery than group 2 (32 min vs. 38 min, p = 0.032) and a lower tourniquet pressure (250 mmHg vs. 270 mmHg, p = 0.019). In conclusion, simultaneous plate implantation at the femur and tibia and metaphyseal plate positioning resulted in prolonged pain and a delay of function. In addition, the amplitude of tourniquet pressure or duration of surgery could play a factor.