Search

This work is the second in a series of publications outlining the fundamental principles and proposed design of a biopharmaceutics classifications system for inhaled drugs and drug products (the iBCS). Here, a mechanistic computer-based model has been used to explore the sensitivity of the primary biopharmaceutics functional output parameters: (i) pulmonary fraction dose absorbed (

For oral drugs, the formulator and discovery chemist have a tool available to them that can be used to navigate the risks associated with the selection and development of immediate release oral drugs and drug products. This tool is the biopharmaceutics classification system (giBCS). Unfortunately, no such classification system exists for inhaled drugs. The perspective outlined in this manuscript provides the foundational principles and framework for a classification system for inhaled drugs. The proposed classification system, an inhalation-based biopharmaceutics classification system (iBCS), is based on fundamental biopharmaceutics principles adapted to an inhalation route of administration framework. It is envisioned that a classification system for orally inhaled drugs will facilitate an understanding of the technical challenges associated with the development of new chemical entities and their associated new drug products (device and drug formulation combinations). Similar to the giBCS, the iBCS will be based on key attributes describing the drug substance (solubility and permeability) and the drug product (dose and dissolution). This manuscript provides the foundational aspects of an iBCS, including the proposed scientific principles and framework upon which such a system can be developed.

Tryptophan (Trp) plays a variety of critical functional roles in protein biochemistry however, owing to its low natural frequency and poor nucleophilicity, the design of effective methods for both single protein bioconjugation at Trp as well as for in situ chemoproteomic profiling remains a challenge. Here, we report a method for covalent Trp modification that is suitable for both scenarios by invoking photo-induced electron transfer (PET) as a means of driving efficient reactivity. We have engineered biaryl N-carbamoyl pyridinium salts that possess a donor-acceptor relationship which enables optical triggering with visible light whilst simultaneously attenuating the probe’s photo-oxidation potential in order to prevent photodegradation. This probe was assayed against a small bank of eight peptides and proteins, where it was found that micromolar concentrations of probe and short irradiation times (10–60 min) with violet light enabled efficient reactivity towards surface exposed Trp residues. The carbamate transferring group can be used to transfer useful functional groups to proteins including affinity tags and click handles. DFT calculations and other mechanistic analyses reveal correlations between excited state lifetimes, relative fluorescent quantum yields, and chemical reactivity. Biotinylated and azide-functionalized pyridinium salts were used for Trp profiling in HEK293T lysates and in situ in HEK293T cells using 440 nm LED irradiation. Peptide level enrichment from live cell labelling experiments identified 290 Trp modifications, with an 82% selectivity for Trp modification over other π-amino acids; demonstrating the ability of this method to identify and quantify reactive Trp residues from live cells.

OBJECTIVE This study evaluated urinary angiotensinogen in preeclampsia. METHODS Normal pregnant (n = 57) and preeclamptic patients (n = 31); Normal pregnant (n = 10) and preeclamptic rats (n = 10) were studied. Urinary angiotensinogen and plasma angiotensin II were assayed by enzyme-linked immunosorbent assay (ELISA). RESULTS Urinary angiotensinogen in preeclampsia patients (2.0 ± 1.1 ng/mg creatinine) was suppressed (*p

Background: Bacillus Calmette-Guerin (BCG) is a vaccine used to protect against tuberculosis primarily in infants to stop early infection in areas of the world where the disease is endemic. Normally administered as a percutaneous injection, BCG is a live significantly attenuated bacteria that is now being investigated for its potential within an inhalable vaccine formulation. This study investigates the feasibility and performance of two jet and two vibrating mesh nebulizers aerosolizing BCG and the resulting particle characteristics and residual viability of the bacteria postaerosolization. Methods: A jet nebulizer (Collison), outfitted either with a 3- or 6-jet head, was compared with two clinical nebulizers, the vibrating mesh Omron MicroAir and Aerogen Solo devices. Particle characteristics, including aerodynamic particle sizing, was performed on all devices within a common aerosol chamber configuration and comparable BCG innocula concentrations. Integrated aerosol samples were collected for each generator and assayed for bacterial viability using conventional microbiological technique. Results: A batch lot of BCG (Danish) was grown to titer and used in all generator assessments. Aerosol particles within the respirable range were generated from all nebulizers at four different concentrations of BCG. The jet nebulizers produced a uniformly smaller particle size than the vibrating mesh devices, although particle concentrations by mass were similar across all devices tested with the exception of the Aerogen Solo, which resulted in a low concentration of BCG aerosols. Conclusions: The resulting measured viable BCG aerosol concentration fraction produced by each device approximated one another; however, a measurable decrease of efficiency and overall viability reduction in the jet nebulizer was observed in higher BCG inoculum starting concentrations, whereas the vibrating mesh nebulizer returned a remarkably stable viable aerosol fraction irrespective of inoculum concentration.

Availability and consumer use of hemp products is rapidly increasing, but little work has been done to assess aerosol emissions of hemp pre-rolls. The objective of this research was to characterize the aerosol of pre-rolled joints from hemp material enriched for production of cannabigerol (CBG) that were smoked on a test system mimicking human use patterns. Aerosol emissions were collected and analyzed using glass microfiber filters and charcoal cartridges. The aerosol was screened for nine phytocannabinoids and 19 terpenes. Three phytocannabinoids (CBG, cannabichromene (CBC), and delta-9-tetrahydrocannabinol (THC)) were detected and quantified at a mean (SD) concentration of 19.4 (4.7), 0.48 (0.01), and 0.40 (0.04) mg per pre-roll, respectively. Five terpenes ((–)-α-bisabolol, (–)-guaiol, β-caryophyllene, nerolidol, and α-humulene) were detected and quantified at an average concentration of 352.7 (112.0), 194.3 (66.4), 106.0 (50.4), 28.3 (9.3), and 27.7 (11.2) µg per pre-roll, respectively. Particle size distribution testing via aerodynamic particle sizer and inertial impactor showed that average size of emitted aerosols was 0.77 (0.0) and 0.54 (0.1) µm, respectively. This study describes methodology for characterization of cannabinoid and terpene dose in emitted aerosols and aerosolization efficiency from hemp pre-rolls. It also presents these data for one of the marketed products.

SARS-CoV-2 is a highly transmissible respiratory pathogen whose main transmission route is airborne. Development of an animal model and exposure system that recapitulates airborne transmission of SARS-CoV-2 is integral for understanding the dynamics of SARS-CoV-2 spread in individuals and populations. Here we designed, built, and characterized a hamster transmission caging and exposure system that allows for efficient SARS-CoV-2 airborne transmission from an infected index animal to naïve recipients under unidirectional airflow, without contribution from fomite or direct contact transmission. To validate our system, we assessed a 1:1 or 1:4 ratio of infected index to naive recipient hamsters and compared their virological and clinical measurements after eight hours of airborne exposure. Airborne exposure concentrations and pulmonary deposited dose of SARS-CoV-2 in index and naïve hamsters, respectively, were similar in both groups. Daily nasal viral RNA levels, and terminal (day 5) lung viral RNA and infectious virus, and fecal viral RNA levels were statistically similar among 1:1 and 1:4 naive animals. However, virological measurements in the 1:4 naïve animals were more variable than the 1:1 naïve animals, likely due to hamster piling behavior creating uneven SARS-CoV-2 exposure during the grouped 1:4 airborne exposure. This resulted in slight, but not statistically significant, changes in daily body weights between the 1:1 and 1:4 naive groups. Our report describes a multi-chamber caging and exposure system that allowed for efficient SARS-CoV-2 airborne transmission in single and grouped hamsters. This system can be used to better define airborne transmission dynamics and test transmission-blocking therapeutic strategies against SARS-CoV-2.ImportanceThe main route of SARS-CoV-2 transmission is airborne. However, there are few experimental systems that can assess airborne transmission dynamics of SARS-CoV-2 in vivo. Here, we designed, built, and characterized a hamster transmission caging and exposure system that allows for efficient SARS-CoV-2 airborne transmission in Syrian hamsters, without contributions from fomite or direct contact transmission. We successfully measured SARS-CoV-2 viral RNA in aerosols and demonstrated that SARS-CoV-2 is transmitted efficiently at either a 1:1 or 1:4 infected index to naïve recipient hamster ratio. This is meaningful as a 1:4 infected index to naïve hamster ratio would allow for simultaneous comparisons of various interventions in naïve animals to determine their susceptibility of infection by aerosol transmission of SARS-CoV-2. Our SARS-CoV-2 exposure system allows for testing viral airborne transmission dynamics and transmission-blocking therapeutic strategies against SARS-CoV-2 in Syrian hamsters.

Transmission-blocking strategies that slow the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and protect against coronavirus disease 2019 (COVID-19) are needed. We have developed an orally delivered adenovirus type 5–vectored SARS-CoV-2 vaccine candidate that expresses the spike protein. Here, we demonstrated that hamsters vaccinated by the oral or intranasal route had robust and cross-reactive antibody responses. We then induced a postvaccination infection by inoculating vaccinated hamsters with SARS-CoV-2. Orally or intranasally vaccinated hamsters had decreased viral RNA and infectious virus in the nose and lungs and experienced less lung pathology compared to mock-vaccinated hamsters after SARS-CoV-2 challenge. Naïve hamsters exposed in a unidirectional air flow chamber to mucosally vaccinated, SARS-CoV-2–infected hamsters also had lower nasal swab viral RNA and exhibited fewer clinical symptoms than control animals, suggesting that the mucosal route reduced viral transmission. The same platform encoding the SARS-CoV-2 spike and nucleocapsid proteins elicited mucosal cross-reactive SARS-CoV-2–specific IgA responses in a phase 1 clinical trial (NCT04563702). Our data demonstrate that mucosal immunization is a viable strategy to decrease SARS-CoV-2 disease and airborne transmission.

Remdesivir (RDV) is a nucleotide analog prodrug with demonstrated clinical benefit in patients with coronavirus disease 2019 (COVID-19). In October 2020, the U.S. FDA approved intravenous RDV as the first treatment for hospitalized COVID-19 patients. Furthermore, RDV has been approved or authorized for emergency use in more than 50 countries. To make RDV more convenient for nonhospitalized patients earlier in disease, alternative routes of administration are being evaluated. Here, we investigated the pharmacokinetics and efficacy of RDV administered by head dome inhalation in African green monkeys (AGM). Relative to an intravenous administration of RDV at 10 mg/kg, an about 20-fold lower dose administered by inhalation produced comparable concentrations of the pharmacologically active triphosphate in lower respiratory tract tissues. Distribution of the active triphosphate into the upper respiratory tract was also observed after inhaled RDV exposure. Inhalation RDV dosing resulted in lower systemic exposures to RDV and its metabolites as compared with intravenous RDV dosing. An efficacy study with repeated dosing of inhaled RDV in an AGM model of SARS-CoV-2 infection demonstrated reductions in viral replication in bronchoalveolar lavage fluid and respiratory tract tissues compared with placebo. Efficacy was observed with inhaled RDV administered once daily at a pulmonary deposited dose of 0.35 mg/kg beginning about 8 hours after infection. Moreover, the efficacy of inhaled RDV was similar to that of intravenous RDV administered once at 10 mg/kg followed by 5 mg/kg daily in the same study. Together, these findings support further clinical development of inhalation RDV.