Search

Plants produce reactive oxygen species (ROS) upon infection, which typically trigger defence mechanisms and impede pathogen proliferation. Root-knot nematodes (RKNs, Meloidogyne spp.) represent highly detrimental pathogens capable of parasitizing a broad spectrum of crops, resulting in substantial annual agricultural losses. The involvement of ROS in RKN parasitism is well acknowledged. In this study, we identified a novel effector from Meloidogyne incognita, named CATLe, that contains a conserved catalase domain, exhibiting potential functions in regulating host ROS levels. Phylogenetic analysis revealed that CATLe is conserved across RKNs. Temporal and spatial expression assays showed that the CATLe gene was specifically up-regulated at the early infection stages and accumulated in the subventral oesophageal gland cells of M. incognita. Immunolocalization demonstrated that CATLe was secreted into the giant cells of the host plant during M. incognita parasitism. Transient expression of CATLe significantly dampened the flg22-induced ROS production in Nicotiana benthamiana. In planta assays confirmed that M. incognita can exploit CATLe to manipulate host ROS levels by directly degrading H2O2. Additionally, interfering with expression of the CATLe gene through double-stranded RNA soaking and host-induced gene silencing significantly attenuated M. incognita parasitism, highlighting the important role of CATLe. Taken together, our results suggest that RKNs can directly degrade ROS products using a functional catalase, thereby manipulating host ROS levels and facilitating parasitism.

To facilitate our understanding of proteome dynamics during signaling events, robust workflows affording fast time resolution without confounding factors are essential. We present Surface-exposed protein Labeling using PeroxidaSe, H2O2, and Tyramide-derivative (SLAPSHOT) to label extracellularly exposed proteins in a rapid, specific, and sensitive manner. Simple and flexible SLAPSHOT utilizes recombinant soluble APEX2 protein applied to cells, thus circumventing the engineering of tools and cells, biological perturbations, and labeling biases. We applied SLAPSHOT and quantitative proteomics to examine the TMEM16F-dependent plasma membrane remodeling in WT and TMEM16F KO cells. Time-course data ranging from 1 to 30 min of calcium stimulation revealed co-regulation of known protein families, including the integrin and ICAM families, and identified proteins known to reside in intracellular organelles as occupants of the freshly deposited extracellularly exposed membrane. Our data provide the first accounts of the immediate consequences of calcium signaling on the extracellularly exposed proteome.

To oxidize trace concentrations of organic contaminants under conditions relevant to surface- and groundwater, air-diffusion cathodes were coupled to stainless-steel cathodes that convert atmospheric O2 into hydrogen peroxide (H2O2), which then was activated to produce hydroxyl radicals (·OH). By separating H2O2 generation from its activation and employing a flow-through electrode consisting of stainless-steel fibers, the two processes could be operated efficiently in a manner that overcame mass-transfer limitations for O2, H2O2, and trace organic contaminants. The flexibility resulting from separate control of the two processes made it possible to avoid both the accumulation of excess H2O2 and the energy losses that take place after H2O2 has been depleted. The decrease in treatment efficacy occurring in the presence of natural organic matter was substantially lower than that typically observed in homogeneous advanced oxidation processes. Experiments conducted with ionized and neutral compounds indicated that electrostatic repulsion prevented negatively charged ·OH scavengers from interfering with the oxidation of neutral contaminants. Energy consumption by the dual-cathode system was lower than values reported for other technologies intended for small-scale drinking water treatment systems. The coordinated operation of these two cathodes has the potential to provide a practical, inexpensive way for point-of-use drinking water treatment.

Rapid and precise detection of hydrogen peroxide (H2O2) holds great significance since it is linked to numerous physiological and inorganic catalytic processes. We herein developed a label-free and washing-free strategy to detect H2O2 by employing a hand-held personal glucose meter (PGM) as a signal readout device. By focusing on the fact that the reduced redox mediator ([Fe(CN)6]4-) itself is responsible for the final PGM signal, we developed a new PGM-based strategy to detect H2O2 by utilizing the target H2O2-mediated oxidation of [Fe(CN)6]4- to [Fe(CN)6]3- in the presence of horseradish peroxidase (HRP) and monitoring the reduced PGM signal in response to the target amount. Based on this straightforward and facile design principle, H2O2 was successfully determined down to 3.63 μM with high specificity against various non-target molecules. We further demonstrated that this strategy could be expanded to identify another model target choline by detecting H2O2 produced through its oxidation promoted by choline oxidase. Moreover, we verified its practical applicability by reliably determining extracellular H2O2 released from the breast cancer cell line, MDA-MB-231. This work could evolve into versatile PGM-based platform technology to identify various non-glucose target molecules by employing their corresponding oxidase enzymes, greatly advancing the portable biosensing technologies.

The purpose of this study was to evaluate the effects of desensitizing MI Varnish (GC America) applied before or after bleaching on the mineral component of enamel and surface topography. The coronal portions of 10 freshly extracted bovine teeth were segmented for a total of 40 specimens. Enamel specimens obtained from each tooth were randomly divided into four groups (n = 10): Group A = no bleaching; Group B = bleaching with 40% hydrogen peroxide (HP); Group C = MI Varnish applied before bleaching; and Group D = MI Varnish applied after bleaching. The calcium (Ca) and phosphorus (P) levels of the specimens in each group were determined by energy dispersive spectroscopy (EDS). Morphologic changes were observed using scanning electron microscopy (SEM). One-way ANOVA and Tukey HSD tests were used for statistical analyses (α = .05). The mean Ca content of Group B was significantly lower than those of Groups A, C, and D (P < .05). The mean Ca content of Group C was significantly lower than that of Group A (P < .05). There was no significant difference in Ca content between the other groups (P > .05). The mean P content of Group A was significantly higher than those of Groups B to D (P < .05). There was no significant difference in P content between Groups B to D (P > .05). Application of MI Varnish before or after in-office bleaching was effective in reducing mineral loss. However, applying MI Varnish after bleaching was more effective. [ABSTRACT FROM AUTHOR]

This study assessed the effectiveness and predictability of a readily available protocol to treat peri-implantitis utilizing mechanical debridement, chemical antiseptic surface detoxification, and osseous grafting. Nine patients (7 women, 2 men; mean age: 56.5 years) with 15 implants with peri-implantitis were included. Pocket probing depth (PPD), bleeding on probing (BOP), and standardized digital periapical radiographic measurements were taken. Surgical flaps were elevated, and the implant threads were cleaned with a plastic curette. Chemical decontamination was performed by scrubbing solutions of 0.25% sodium hypochlorite (NaClO) and 1.5% hydrogen peroxide (H2O2) around the exposed implant using cotton pellets. Bony defects were filled with a 50/50 mixture of bovine hydroxyapatite and nanocrystalline calcium sulfate (CaSO4). A porcine collagen membrane was placed over the grafted bony defect. Follow-up appointments were scheduled 1 week, 2 weeks, 3 months, 6 months, 9 months, and 1 year posttreatment. Clinical and radiographic parameters were assessed and compared. At baseline, PPD ranged from 5 to 7.5 mm (mean: 6 ± 0.7 mm). At 12 months, PPD ranged from 1.5 to 4.2 mm (mean: 2.5 ± 0.8 mm). The mean PPD reduction of 3.6 mm (59.2%) was statistically significant (P < .001). The number of bleeding sites around each test implant decreased significantly from 4 to 0.4 sites between baseline and 12 months (P < .001). Mean radiographic bone loss decreased from 4.8 ± 1.3 mm to 2.7 ± 1.2 mm (P < .001). The proposed method of mechanical decontamination, chemical detoxification, and bone regeneration is clinically effective and reproducible. Clinical peri-implant parameters and radiographic bone levels were improved and maintained their stability for 1 year using this peri-implantitis treatment protocol. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate different protocols for recementation of dislodged glass fiber posts (GFPs).Materials and Methods: The root canals of 50 bovine incisors were prepared to receive GFPs, which were conditioned with 24% hydrogen peroxide, silanized, and cemented with a self-adhesive resin cement. After light curing, the specimens were submitted to a pullout test. The dislodged GPFs were distributed into five experimental groups (n = 10 each) according to surface treatment for recementation: NT = no treatment; SI = silane; ET = 92.8% ethanol/silane; HP = 24% hydrogen peroxide/silane; AL = airborne-particle abrasion (50-μm alumina)/silane. The GFPs were recemented with the same self-adhesive resin cement, and specimens were submitted to a second pullout test. Data were analyzed by Student t test and one-way ANOVA (α = .05).Results: For all groups, the recementation bond strength was higher than the strength obtained after the first cementation (P < .05). There were no statistical differences among the experimental recementation protocols (P = .096).Conclusion: All recementation protocols might be reliably applied since they led to higher bond strength than the first cementation. [ABSTRACT FROM AUTHOR]

Carbon nitride is a promising photocatalyst for hydrogen peroxide (H2O2) production under visible light irradiation. However, current carbon nitride-based photocatalysts show limited H2O2 production owing to high impedance and poor charge transfer ability. In this work, we present a series of CuO decorated graphitic phase carbon nitride (g-C3N4) composites, exhibiting suitable bandgaps for the photocatalytic production of H2O2. The experimental results showed that CuO/g-C3N4 composites exhibited excellent photocatalytic H2O2 production performance and good photocatalytic cycle stability. Significantly, the optimized 30%-CuO/g-C3N4 composite exhibits a high H2O2 yield of 2722.47 μmol L−1 with the addition of CH3OH under visible light. Furthermore, the photocatalytic mechanism is well studied by density functional theory calculations. This work demonstrates that CuO/g-C3N4 composites hold great promise for photocatalytic H2O2 production application. [ABSTRACT FROM AUTHOR]

As one of the important components of active oxygen species, H2O2 (hydrogen peroxide) plays an important role in life activities. Many studies have shown that a high concentration of H2O2 can cause cell necrosis, resulting in oxidative stress and oxidative damage in the body, and then induce various diseases. The application of organic small molecule fluorescent probes in life sciences has attracted the attention of many researchers because of their advantages of being easy to obtain, high spatial and temporal resolution, little damage to biological samples and simple operation. In this study, a new hydrogen peroxide near infrared fluorescence probe JH was constructed using oxanthrene analogues as a molecular framework. The fluorescence emission wavelength of the probe is located in the near infrared region and has a large Stokes shift, which makes the probe less damaging to biological samples and gives lower background interference, which is conducive to improving the detection resolution. The probe can complete the response to H2O2 within 95 min with a low detection limit (4.72 μM), and the color of the solution changes from dark blue to light blue after the response, so H2O2 can be recognized by the naked eye without any tools. In addition, probe JH has been successfully used for the detection of H2O2 in cells, which is expected to become a tool for early diagnosis of diseases. [ABSTRACT FROM AUTHOR]

As a new type of artificial enzyme, a nanozyme is an ideal substitute for natural enzymes and has been successfully applied in many fields. However, in the application of biomolecular detection, most nanozymes have the disadvantages of long reaction times or high detection limits, prompting researchers to search for new efficient nanozymes. In this work, the enzyme-like activities of three polyoxometalate-based iron-organic complexes ([Fe(bpp)2](Mo6O19), [Fe(bpp)2]2(Mo8O26)·2CH3OH, and [Fe(bpp)2]4H[Na(Mo8O26)]3), namely, FeMo6, Fe2Mo8, and Fe4Mo8Na, were analyzed. All three polyoxometalate-based iron-organic complexes were found to be capable of catalyzing hydrogen peroxide (H2O2) to oxidize 3,3′,5,5′-tetramethylbenzidine and o-phenylenediamine, resulting in visible color changes, further exhibiting peroxidase-like activity. Results showed that Fe4Mo8Na had more active sites due to its long chain structure, endowing more prominent peroxidase-like activity compared with Fe2Mo8 and FeMo6. A colorimetric sensing platform for H2O2 and ascorbic acid detection based on Fe4Mo8Na was established. The linear response range for H2O2 detection was 0.5–100 μM, and the detection limit was 0.143 μM. The linear response for ascorbic acid detection ranges from 0 to 750 μM with a detection limit of 1.07 μM. This study provides a new perspective for developing new nanozymes and expanding the sensing and detection application of nanozymes. [ABSTRACT FROM AUTHOR]

Nanozymes are nanomaterials with mimetic enzyme properties and the related research has attracted much attention. It is of great value to develop methods to construct nanozymes and to study their application in bioanalysis. Herein, the metal–ligand cross-linking strategy was developed to fabricate superstructure nanozymes. This strategy takes advantage of being easy to operate, adjustable, cheap, and universal. The fabricated superstructure nanozymes possess efficient peroxidase-like catalytic activity. The enzyme reaction kinetic tests demonstrated that for TMB and H2O2, the Km is 0.229 and 1.308 mM, respectively. Furthermore, these superstructure nanozymes are applied to highly efficient and sensitive detection of glucose. The linear range for detecting glucose is 20–2000 μM, and the limit of detection is 17.5 μM. Furthermore, mechanistic research illustrated that this integrated system oxidizes glucose to produce hydrogen peroxide and further catalyzes the production of ·OH and O2·–, which results in a chromogenic reaction of oxidized TMB for the detection of glucose. This work could not only contribute to the development of efficient nanozymes but also inspire research in the highly sensitive detection of other biomarkers. [ABSTRACT FROM AUTHOR]

Nanozyme technology has gained significant regard and been successfully implemented in various applications including chemical sensing, bio-medicine, and environmental monitoring. Fe-CDs were synthesized and characterized well in this study. As compared to HRP (3.7 mM), the Fe-CDs exhibited a higher affinity towards H2O2 (0.2 mM) using the steady-state kinetic assay and stronger catalytic capability by changing the color of TMB to the blue color of the oxidized state, oxTMB. Additionally, an efficient peroxidase mimic, Fe-CDs/GOx, based on the hybrid cascade system to produce in situ H2O2 for the visual detection of glucose (color change: colorless to blue, and then to green), has been developed in detail, with limits of detection (LODs) for H2O2 and glucose of 0.33 μM and 1.17 μM, respectively. The changes further demonstrate a linear relationship between absorbance and H2O2 concentration, ranging from 10 to 60 μM, and for glucose (1 to 60 μM). To assess the accuracy and detection capability of the Fe-CDs/GOx system, we evaluated a real human serum sample obtained from adult males in a local hospital. In conclusion, Fe-CDs serving as a peroxidase mimic have the potential for various applications in the fields of biomedicine and nanozymes. [ABSTRACT FROM AUTHOR]

The impact of climate change on agricultural production is apparent due to declining irrigation water availability vis-à-vis rising drought stress, particularly affecting summer crops. Growing evidence suggests that zinc (Zn) supplementation may serve as a potential drought stress management strategy in agriculture. Field studies were conducted using soybean (Glycine max var. Saba) as a model crop to test whether foliar application of zinc oxide nanoparticles (ZnO-NPs) or conventional Zn fertilizer (ZnSO4) would mitigate drought-related water stress and improve soybean yield. Each fertilizer was foliar applied twice at a two-week interval during the flowering stage. Experiments were concurrently conducted under non-drought conditions (70% field capacity) for comparison. Results showed drought significantly reduced relative water content, chlorophyll-a, and chlorophyll-b in untreated control plants by 35.7%, 47.7%, and 41.4%, respectively, compared to non-drought conditions (p < 0.05). Under drought conditions, ZnO-NPs (200 mg Zn/L) led to 33.1% and 20.7% increase in chlorophyll-a and chlorophyll-b levels, respectively, compared to ZnSO4 at 400 mg Zn/L. Likewise, catalase, peroxidase and superoxide dismutase activities increased by 62.6%, 39.5% and 28.5%, respectively, with ZnO-NPs (200 mg Zn/L) under drought compared to non-drought conditions. Proline was significantly increased under drought but was remarkably suppressed (~ 54% lower) with ZnO-NPs (200 mg Zn/L) treatment. More importantly, the highest seed yield was observed with ZnO-NPs (200 mg Zn/L) treatment under drought (39% higher than untreated control) and non-drought (79.4% higher than control) conditions. Overall, the findings suggest that ZnO-NPs could promote seed yield in soybean under drought stress via increased antioxidant activities, increased relative water content, decreased stress-related proline content, and increased photosynthetic pigments. It is recommended that foliar application of 200 mg Zn/L as ZnO-NPs could serve as an effective drought stress management strategy to improve soybean yield. [ABSTRACT FROM AUTHOR]

Photocatalytic technology is considered to be a sustainable strategy to convert H2 O and O2 into H2 O2. However, constructing photocatalytically active and stable organic photocatalyst remain a challenge. In this study, a new class of porous aromatic framework photocatalysts (BF-PAFs) were designed and synthesized, in which 9,9′-bifluorenylidene (99′-BF) and different alkynes are alternately connected. The BF-PAFs were constructed and served as photocatalysts for H2 O2 synthesis. Experimental results show that the introduction of different alkynes can effectively regulate the optical band gap and energy band structure, which may further determine their photocatalytic performance. Upon visible light irradiation, PAF-370 exhibits high efficiency for photosynthesis of H2 O2 with a production rate of 730 μmol g–1 h–1 in the presence of sacrificial reagent from water and oxygen via oxygen reduction reaction (ORR) pathway. Furthermore, up to 61 μmol H2 O2 could be generated from this photocatalytic system after 14 hours. [ABSTRACT FROM AUTHOR]

Hydrogen peroxide (H2O2) has practical applications in healthcare, food security, and environmental protection. The current study has been focused on creating H2O2 sensors using a bimetallic composition of polypyrrole/Cobalt-silver on indium tin oxide (ITO) through electrochemical fabrication. Composite hybrid materials comprising Co@Ag/PPy/ITO were successfully synthesized using chronoamperometry and pulsed electrodeposition techniques. The obtained electrode (Co@Ag/PPy/ITO) was studied using scanning electron microscopy (SEM), ultraviolet–visible, and cyclic voltammetry techniques. The energy-dispersive X-ray spectroscopy and SEM revealed that silver and cobalt nanoparticles were distributed on the PPy surface, forming fern-like structures. A detailed investigation of the electrochemical properties of the bimetallic composition was conducted using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy. The amperometric method and CV were used to carry out the electrochemical detection of H2O2. The non-enzymatic H2O2 sensor exhibited an enhanced amperometry response, showing a higher sensitivity of 3.664 mA mM−1 cm−2 within a linear range spanning 0.12–2.36 mM. Notably, the sensor achieved a low detection limit of 1.985 μM (S/N = 3). Additionally, the nanocomposite hybrids demonstrated superior stability, repeatability, and reproducibility, making this sensor suitable for long-term use. [ABSTRACT FROM AUTHOR]

This work combines the nanoconfined material with the air-breathing gas diffusion electrode equips a wide practical range of applications for the synthesis of high-yield H 2 O 2 and upgrading of H 2 O 2 products. [Display omitted] • Yolk-shell SnS 2 @CSs Z-scheme nanoreactor is controllably synthesized. • Hydrogen peroxide production is increased through the nano-confinement effect. • Continuous hydrophobic layers allow air to spontaneously diffuse into the AGPE. • The photoelectrode has a good reusability and stability for activation of O 2 /H 2 O. • Hydrogen peroxide is produced under neutral condition media. The diffusion and adsorption properties of the O 2 /H 2 O corpuscles at active sites play a crucial role in the fast photo-electrocatalytic reaction of hydrogen peroxide (H 2 O 2) production. Herein, SnS 2 nanosheets with abundant interfacial boundaries and large specific areas are encapsulated into hollow mesoporous carbon spheres (CSs) with flexibility, producing a yolk-shell SnS 2 @CSs Z-scheme photocatalyst. The nanoconfined microenvironment of SnS 2 @CSs could enrich O 2 /H 2 O in catalyst cavities, which allows sufficient internal O 2 transfer, improving the surface chemistry of catalytic O 2 to O 2 − conversion and increasing reaction kinetics. By shaping the mixture of SnS 2 @CSs and polytetrafluoroethylene (PTFE) on carbon felt (CF) using the vacuum filtration method, the natural air-breathing gas diffusion photoelectrode (AGPE) was prepared, and it can achieve an accumulated concentration of H 2 O 2 about 12 mM after a 10 h stability test from pure water at natural pH without using electrolyte and sacrificial agents. The H 2 O 2 product is upgraded through one downstream route of conversion of H 2 O 2 to sodium perborate. The improved H 2 O 2 production performance could be ascribed to the combination of the confinement effect of SnS 2 @CSs and the rich triple phase interfaces with the continuous hydrophobic layer and hydrophilic layer to synergistically modulate the photoelectron catalytic microenvironment, which enhanced the transfer of O 2 mass and offered a stronger affinity to oxygen bubbles. The strategy of combining the confined material with the air-breathing gas diffusion electrode equips a wide practical range of applications for the synthesis of high-yield hydrogen peroxide. [ABSTRACT FROM AUTHOR]

[Display omitted] Piezocatalysis has emerged as a sustainable alternative for hydrogen peroxide production. However, the current development of efficient piezocatalysts is predominantly focusing on those conventional piezoelectric ceramic oxides with high permittivity and limited catalytic activities. Therefore, innovative approaches to develop novel piezocatalysts in particular from these outstanding paraelectric semiconductors are highly required. In this work, by employing a feasible doping strategy, robust piezoelectric property is created on the Ba 2 Nb 2-x Fe x O 6-δ double perovskite oxides, typically characterized by a stable paraelectric cubic structure. Optimum Fe doping not only intensifies the double perovskite phase but also inspires a phase transition from a centrosymmetric cubic to a piezoelectric tetragonal phase, thereby achieving desirable piezoelectricity and enabling a series of favorable physical properties including redox activity, active sites of anion defects, reduced bandgap, and increased free charge density. All these are important factors to enhance piezocatalytic activity. As a result, Ba 2 NbFeO 6-δ achieved by the optimum Fe doping demonstrated exceptional piezocatalytic H 2 O 2 yield of 512 and 690 µmol g-1 h−1 under atmosphere and oxygen-purging conditions, respectively, without the presence of any sacrificial agents. Mechanistic investigations reveal that both water oxidation and oxygen reduction involve in the H 2 O 2 production, wherein piezopotential plays a critical role not only in facilitating the charge carrier separation and transportation but also in modulating the band structure to enhance the catalyst redox capacity. This study offers a feasible and universal strategy for the design of novel piezocatalysts, expanding the windows for catalyst selection for piezocatalysis. [ABSTRACT FROM AUTHOR]

Summary Flooding is a widespread natural disaster that causes tremendous yield losses of global food production. Rice is the only cereal capable of growing in aquatic environments. Direct seeding by which seedlings grow underwater is an important cultivation method for reducing rice production cost. Hypoxic germination tolerance and root growth in waterlogged soil are key traits for rice adaptability to flooded environments. Alternative oxidase (AOX) is a non‐ATP‐producing terminal oxidase in the plant mitochondrial electron transport chain, but its role in hypoxia tolerance had been unclear. We have discovered that AOX1a is necessary and sufficient to promote germination/coleoptile elongation and root development in rice under flooding/hypoxia. Hypoxia enhances endogenous H2O2 accumulation, and H2O2 in turn activates an ensemble of regulatory genes including AOX1a to facilitate the conversion of deleterious reactive oxygen species to H2O2 in rice under hypoxia. We show that AOX1a and H2O2 act interdependently to coordinate three key downstream events, that is, glycolysis/fermentation for minimal ATP production, root aerenchyma development and lateral root emergence under hypoxia. Moreover, we reveal that ectopic AOX1a expression promotes vigorous root and plant growth, and increases grain yield under regular irrigation conditions. Our discoveries provide new insights into a unique sensor–second messenger pair in which AOX1a acts as the sensor perceiving low oxygen tension, while H2O2 accumulation serves as the second messenger triggering downstream root development in rice against hypoxia stress. This work also reveals AOX1a genetic manipulation and H2O2 pretreatment as potential targets for improving flooding tolerance in rice and other crops. [ABSTRACT FROM AUTHOR]

Electrochemical synthesis of hydrogen peroxide (H2O2) via the two‐electron oxygen reduction reaction (2e−‐ORR) provides an alternative method to the energy‐intensive anthraquinone method. Metal macrocycles with precise coordination are widely used for 2e−‐ORR electrocatalysis, but they have to be commonly loaded on conductive substrates, thus exposing a large number of 2e−‐ORR‐inactive sites that result in poor H2O2 production rate and efficiency. Herein, guided by first‐principle predictions, a substrate‐free and two‐dimensional conductive metal–organic framework (Ni‐TCPP(Co)), composed of CoN4 sites in porphine(Co) centers and Ni2O8 nodes, is designed as a multi‐site catalyst for H2O2 electrosynthesis. The approperiate distance between the CoN4 and Ni2O8 sites in Ni‐TCPP(Co) weakens the electron transfer between them, thus ensuring their inherent activities and creating high‐density active sites. Meanwhile, the intrinsic electronic conductivity and porosity of Ni‐TCPP(Co) further facilitate rapid reaction kinetics. Therefore, outstanding 2e−‐ORR electrocatalytic performance has been achieved in both alkaline and neutral electrolytes (>90 %/85 % H2O2 selectivity within 0–0.8 V vs. RHE and >18.2/18.0 mol g−1 h−1 H2O2 yield under alkaline/neutral conditions), with confirmed feasibility for water purification and disinfection applications. This strategy thus provides a new avenue for designing catalysts with precise coordination and high‐density active sites, promoting high‐efficiency electrosynthesis of H2O2 and beyond. [ABSTRACT FROM AUTHOR]

Here, a novel paired electrolysis system is constructed, where fluorine-doped tin oxide glass serves as the anode for the water oxidation reaction to produce hydrogen peroxide (H2O2), and cobalt phthalocyanine (CoPc)/carbon nanotube (CNT) loaded carbon paper as the cathode for CO2 reduction to generate CO. This system demonstrates a high overall energy efficiency of 34%, where a faradaic efficiency exceeding 90% for CO2 reduction and 60% for water oxidation to H2O2 have been achieved, demonstrating significant energy savings of nearly 40% compared to the respective half-reaction systems. [ABSTRACT FROM AUTHOR]

BACKGROUND: The occurrence and development of various ophthalmic diseases are closely related to excessive oxidative stress, and the inhibition of oxidative stress response may produce preventive and therapeutic effects. OBJECTIVE: To explore the role of Pax6 gene expression on hydrogen peroxide-induced aging of mouse bone marrow mesenchymal stem cells (BM-MSCs). METHODS: Resuscitated BM-MSCs, Pax6/BM-MSCs, and shPax6/BM-MSCs were treated with hydrogen peroxide for 24 hours, and then β-galactosidase staining was performed. The proliferation index Ki67 expression and apoptosis were detected by flow cytometry. The expression of senescence-associated molecules (Wnt7a, p21, and p53) was detected by RT-PCR. RESULTS AND CONCLUSION: (1) After hydrogen peroxide treatment, the cells of the three groups showed senescence phenotype and β-galactosidase staining was positive. Compared with BM -MSCs group, the expression of positive cells in Pax6/BM-MSCs group was less and that in the shPax6/BM-MSCs group was more, and the difference was statistically significant (P < 0.05). (2) The results of flow cytometry showed that compared with BM-MSCs group, the positive expression of Ki67 in the Pax6/BM-MSCs group increased and the level of apoptosis decreased, while the positive expression of Ki67 decreased and the level of apoptosis increased in the shPax6/BM-MSCs group; the difference was significantly different (P < 0.05). (3) RT-PCR showed that compared with the BM-MSCs group, the expression of Wnt7a, p53, and p21 decreased in the Pax6/BM-MSCs group, while the expression of Wnt7a, p53, and p21 increased in the shPax6/ BM-MSCs group; the difference was significantly different (P < 0.05). (4) These findings indicate that overexpression of Pax6 can antagonize the aging progression of BM-MSCs induced by hydrogen peroxide, which may be related to Wnt signaling pathway. [ABSTRACT FROM AUTHOR]

This work investigated the photochemical degradation of malachite green (MG), a cationic triphenylmethane dye used as a coloring agent, fungicide, and antiseptic. UV photolysis was ineffective in the removal of MG as only 12.35% degradation of MG (10 mg/L) was achieved after 60 min of irradiation. In contrast, 100.00% degradation of MG (10 mg/L) was observed after 60 min of irradiation in the presence of 10 mM H2O2 by UV/H2O2 at pH 6.0. Similarly, complete removal (100.00%) of MG was observed at 30 min of the reaction time by UV/H2O2/Fe2+ employing [MG]0 = 10 mg/L, [H2O2]0 = 10 mM, [Fe2+]0 = 2.5 mg/L, and [pH]0 = 3.0. For the UV/H2O2 process, the degradation efficiency was higher at pH 6.0 than at pH 3.0 as the k obs values were 0.0873 and 0.0690 min−1, respectively. However, UV/H2O2/Fe2+ showed higher reactivity at pH 3.0 than at pH 6.0. Chloride and nitrate ions slightly inhibited the removal efficiency of MG by both UV/H2O2 and UV/H2O2/Fe2+ processes. Moreover, three degradation products (DPs) of MG, (i) 4-dimethylamino-benzophenone (DABP), (ii) 4-amino-benzophenone (ABP), and (iii) 4-dimethylamino-phenol (DAP), were identified by GC-MS during the UV/H2O2 treatment. These DPs were found to demonstrate higher aquatic toxicity than the parent MG, suggesting that researchers should focus on the removal of target pollutants as well as their DPs. Nevertheless, the results of this study indicate that both UV/H2O2 and UV/H2O2/Fe2+ processes could be implemented to alleviate the harmful environmental impacts of dye and textile industries. [ABSTRACT FROM AUTHOR]

Reactive oxygen species (ROS) are physiological byproducts of neuronal metabolism. However, an imbalance between ROS generation and antioxidant capacity, often driven by dysregulated pro-oxidant enzymes like nicotinamide adenine dinucleotide phosphate oxidases (NOX), can result in deleterious oxidative stress. This oxidative stress is a critical factor in the pathogenesis of neurodegenerative diseases. While interventions with broad-spectrum antioxidants have demonstrated limited efficacy, the modulation of endogenous antioxidant mechanisms presents a promising therapeutic avenue. Here, we investigated the potential of the neuroprotective hormone prolactin to mitigate oxidative stress and subsequent neuronal cell death. Prolactin protected primary mouse hippocampal neurons from hydrogen peroxide (H2O2)-induced oxidative damage. Prolactin reduced ROS levels, lipid peroxidation, and apoptosis, and its effects were occluded by a specific prolactin receptor antagonist (G129R-hPRL). Mechanistically, prolactin suppressed H2O2-induced mRNA upregulation of pro-oxidative Nox4 and pro-apoptotic Bax. Moreover, prolactin induced nuclear factor kappa B (NF-κB) nuclear translocation, and the inhibition of the NF-κB signaling pathway abolished the neuroprotective and transcriptional effects of prolactin, indicating its central role in prolactin-mediated protection. Our findings indicate that prolactin exerts potent antioxidant and neuroprotective effects by modulating the expression of Nox4 and Bax, thereby reducing ROS generation and neuronal apoptosis. This study underscores the therapeutic potential of prolactin in attenuating oxidative stress and suggests a possible role in the treatment of neurodegenerative diseases. [ABSTRACT FROM AUTHOR]

Efficient activation of hydrogen peroxide (H2O2) through biomimetic catalysis still faces a major challenge. In this work, inspired by the catalytic pocket of natural peroxidase, Cu single atom (CuSA) and AuCu nanoparticles (AuCuNPs) anchored on nitrogen‐doped carbon skeleton (CuSA‐AuCuNPs/NC) serve as dual active sites that significantly accelerate the charge transfer process and thus achieve efficient H2O2 activation. Meanwhile, the experimental and theoretical calculations show that the well‐established electronic communication effect between CuSA and AuCuNPs results in moderate electronic modifications to CuSA, which promotes the heterolysis of H2O2 and the timely desorption of H2O. As a proof of concept, CuSA‐AuCuNPs/NC show remarkable performance in detecting uranyl ions in seawater. This work provides new insights into the H2O2 activation for colorimetric sensing. [ABSTRACT FROM AUTHOR]

Industrial production of H2O2 requires lots of energy and causes environmental pollution. Moreover, in subsequent applications, much economic loss could be produced during the transportation process of H2O2 and its dilution process. Therefore, it is highly desirable for in situ application of H2O2. In recent years, catalytic synthesis of H2O2, e. g., direct catalytic synthesis, electrocatalytic synthesis, and photocatalytic synthesis, has attracted more and more attention because the continuous and low‐concentration H2O2 produced by catalytic synthesis can be directly used for the oxidation of organic compounds, effectively avoiding the shortcomings of the current industrial route. Here, we briefly reviewed the latest processes for the catalytic production of H2O2 via various routes. On this basis, we summarized and discussed the in situ application of H2O2 in typical organic conversion reactions, including the ammoximation of ketones, the oxidation of alcohols, the oxidation of C−H bonds, and the oxidation of olefins. Some in situ coupling reactions have shown excellent performance with high conversion and selectivity, and the economic cost has been significantly reduced. Finally, the shortcomings of the in situ utilization of H2O2 in coupling reactions were analyzed, and some strategies for promoting the efficiency of the H2O2 application in organic synthesis were proposed. [ABSTRACT FROM AUTHOR]

AbstractA flow injection (FI) method employing the reaction between 1,10-phenanthroline (C12H8N2) and hydrogen peroxide (H2O2) in a basic medium (pH 12) with chemiluminescence (CL) detection has been developed to detect copper oxychloride pesticides in freshwater and fruit samples. The experimental conditions were optimized, and a solid phase extraction (SPE) technique modified with cupron was employed for effective phase separation during extraction. Calibration curves for copper oxychloride standard solutions demonstrated linearity over the range of 0.001 to 10 μg L−1, with the regression equation y = 506681x − 422.29 and a coefficient of determination (R2) of 0.9973 (n = 9). The limits of detection (LOD) and quantification (LOQ) were determined to be 2.62 × 10−4 μg L−1 and 7.94 × 10−4 μg L−1, respectively. Relative standard deviations (RSDs) ranged from 2.6% to 4.5%, and the method achieved an injection throughput of 120 h−1. When applied to spiked water and fruit samples, the method showed no significant differences at the 95% confidence level compared to established methods. Recoveries for copper oxychloride were found to range from 96% to 120% (RSD = 1.9 − 5.6%) in fruit samples and from 95% to 110% (RSD = 1.5 − 4.8%) in water samples. Additionally, the potential chemiluminescence reaction mechanism was investigated. [ABSTRACT FROM AUTHOR]

Two‐dimensional covalent organic frameworks (2D‐COFs) have recently emerged as fascinating scaffolds for solar‐to‐chemical energy conversion because of their customizable structures and functionalities. Herein, two tris(triazolo)triazine‐based COF materials (namely COF‐JLU51 and COF‐JLU52) featuring large surface area, high crystallinity, excellent stability and photoelectric properties were designed and constructed for the first time. Remarkably, COF‐JLU51 gave an outstanding H2O2 production rate of over 4200 μmol g−1 h−1 with excellent reusability in pure water and O2 under one standard sun light, that higher than its isomorphic COF‐JLU52 and most of the reported metal‐free materials, owing to its superior generation, separation and transport of photogenerated carriers. Experimental and theoretical researches prove that the photocatalytic process undergoes a combination of indirect 2e− O2 reduction reaction (ORR) and 4e− H2O oxidation reaction (WOR). Specifically, an ultrahigh yield of 7624.7 μmol g−1 h−1 with apparent quantum yield of 18.2 % for COF‐JLU52 was achieved in a 1 : 1 ratio of benzyl alcohol and water system. This finding contributes novel, nitrogen‐rich and high‐quality tris(triazolo)triazine‐based COF materials, and also designate their bright future in photocatalytic solar transformations. [ABSTRACT FROM AUTHOR]

The direct utilization of solar energy for the artificial photosynthesis of hydrogen peroxide (H2O2) provides a reliable approach for producing this high-value green oxidant. Here we report on the utility of high-entropy oxide (HEO) semiconductor as an all-in-one photocatalyst for visible light-driven H2O2 production directly from H2O and atmospheric O2 without the need of any additional cocatalysts or sacrificial agents. This high-entropy photocatalyst contains eight earth-abundant metal elements (Ti/V/Cr/Nb/Mo/W/Al/Cu) homogeneously arranged within a single rutile phase, and the intrinsic chemical complexity along with the presence of a high density of oxygen vacancies endow high-entropy photocatalyst with distinct broadband light harvesting capability. An efficient H2O2 production rate with an apparent quantum yield of 38.8% at 550 nm can be achieved. The high-entropy photocatalyst can be readily assembled into floating artificial leaves for sustained on-site production of H2O2 from open water resources under natural sunlight irradiation. An "all-in-one" high-entropy semiconductor photocatalyst enables the photocatalytic production of H2O2 from H2O and O2 under visible light without any external cocatalysts or sacrificial agents [ABSTRACT FROM AUTHOR]

Formic acid is considered a promising hydrogen carrier. Biomass‐derived formic acid can be obtained by oxidative decomposition of sugars. This study explored the production of formic acid from cellobiose, a disaccharide consisting of d‐glucose linked by β‐glycosidic bonds using heterogeneous catalysts under mild reaction conditions. The use of alkaline earth metal oxide solid base catalysts like CaO and MgO in the presence of hydrogen peroxide could afford formic acid from cellobiose at 343 K. While CaO gave 14 % yield of formic acid, the oxide itself was converted to a harmful metal peroxide, CaO2 after the reaction. In contrast, MgO could produce formic acid without the formation of the metal peroxide. The difficulty in selectively synthesizing formic acid from cellobiose using these solid base catalysts was due to the poor conversion of cellobiose to glucose. Using a combination of solid acid and base catalysts, a high formic acid yield of 33 % was obtained under mild reaction conditions due to the quantitative hydrolysis of cellobiose to glucose by a solid acid followed by the selective decomposition of glucose to formic acid by a solid base. [ABSTRACT FROM AUTHOR]

A novel glow-type chemiluminescence (CL)-based nanosensing system was developed for sensitive and rapid point-of-care testing (POCT) of H2O2 in food. CuSe nanoparticles (CuSeNPs) have excellent peroxidase-like activity. After being modified with thiols of 4-mercaptophenylboronic acid (MBA) (CuSeNPs@MBA), luminol can be catalyzed to produce long-lasting CL in the presence of H2O2. The possible reason for the long-lasting glow-type CL behavior was explored. Under the optimized condition, H2O2 can be sensitively detected with improved repeatability. The limit of detection is as low as 0.30 μM. To meet the requirement of in situ and outside of laboratory detection, a 3D-printed portable device was designed which can eliminate the environmental interference to improve detection accuracy. The developed multifunctional platform also has the advantages of simple operation and low cost, suggesting its great potential for applications in food and agricultural fields. [ABSTRACT FROM AUTHOR]

The results reported herein demonstrate for the first time that typical reducing agents in an alkaline medium initiate chemiluminescence of luminol in the presence of hemin, and the efficiency of their action is comparable to that of hydrogen peroxide and exceeds it in the case of the superoxide anion. The pertinent implications of these findings refer to new possibilities for developing chemiluminescence assays and biosensors and to precautions for determining hydrogen peroxide using luminol and hemin in samples of unknown composition, most prominently, of biological origin. [ABSTRACT FROM AUTHOR]

We re-examined the reported increase in mitochondrial ROS production during acute hypoxia in cells. Using the Amplex Ultrared/horseradish peroxidase assay we found a decrease, not increase, in hydrogen peroxide release from HEK293 cells under acute hypoxia, at times ranging from 1 min to 3 h. The rates of superoxide/hydrogen peroxide production from each of the three major sites (site I Q in complex I and site III Qo in complex III in mitochondria, and NADH oxidases (NOX) in the cytosol) were decreased to the same extent by acute hypoxia, with no change in the cells' ability to degrade added hydrogen peroxide. A similar decrease in ROS production under acute hypoxia was found using the diacetyldichlorofluorescein assay. Using a HIF1α reporter cell line we confirmed earlier observations that suppression of superoxide production by site III Qo decreases HIF1α expression, and found similar effects of suppressing site I Q or NOX. We conclude that increased mitochondrial ROS do not drive the response of HIF1α to acute hypoxia, but suggest that cytosolic H 2 O 2 derived from site I Q , site III Qo and NOX in cells is necessary to permit HIF1α stabilization by other signals. [Display omitted] [ABSTRACT FROM AUTHOR]

Redox reactions, involving electron transfer, are critical to human physiology. However, progress in understanding redox metabolism is hindered by flawed analytical methods. This review highlights emerging techniques that promise to revolutionize redox research, enhancing our comprehension of human health and disease. Oxygen, vital for aerobic metabolism, also produces reactive oxygen species (ROS), such as superoxide and hydrogen peroxide. While historically seen as harmful, ROS at low concentrations are now recognized as key regulators of cell signaling. A balance between ROS and antioxidants, known as redox balance, is crucial, and deviations can lead to oxidative stress. Recent studies have distinguished beneficial "oxidative eustress" from harmful "oxidative distress." New techniques, such as advanced mass spectrometry and high‐throughput immunoassays, offer improved accuracy in measuring redox states and oxidative damage. These advancements are pivotal for understanding redox signaling, cysteine oxidation, and their implications for disease. Looking ahead, the development of precision redox medicine could lead to better treatments for oxidative stress‐related diseases and foster interventions promoting health. [ABSTRACT FROM AUTHOR]

Polyethyleneimine (PEI), as a widely used polymer material in the field of gene delivery, has been extensively studied for modification and shielding to reduce its cytotoxicity. However, research aimed at preparing degradable PEI is scarce. In this work, the hydrogen peroxide (H2O2) oxidation method was used to introduce degradable amide groups in the PEI and a series of oxidized PEI22k (oxPEI22k) with different degrees of oxidation were synthesized by regulating the dosage of H2O2. The relationship between the oxidation degree of oxPEI22k and the gene transfection efficiency of oxPEI22k was studied in detail, confirming that the oxPEI22k with oxidation degrees of 16.7% and 28.6% achieved improved transfection efficiency compared to unmodified PEI. These oxPEI22k also proved reduced cytotoxicity and improved degradability. Further, this strategy was extended to the synthesis of low-molecular-weight oxPEI1.8k. The oxPEI1.8k with suitable oxidation degree also achieved improved transfection efficiency and reduced cytotoxicity. In brief, this work provided high-efficiency and low-cytotoxicity degradable gene delivery carriers by regulating the oxidation degree of PEI, which was of great significance for promoting clinical applications of PEI. [ABSTRACT FROM AUTHOR]

In this study, waste cooking oil‐based palm oil (WCO‐PO) was chosen as feedstock for epoxidation reaction. The epoxidation process of WCO‐PO was carried out using in situ generated performic acid or known as Prileschajew reaction. Based on the Taguchi method of optimization and analysis of variance, a series of experiments were conducted around the optimum conditions or parameters. The findings revealed that the optimal reaction conditions for producing epoxidized waste cooking oil with the highest oxirane content were a hydrogen peroxide molar ratio of 2.0, a temperature of 55°C, formic acid molar ratio of 2.0, and catalyst loading of 0.5% at a constant stirrer speed of 300 rpm and 0.5% catalyst. By employing these optimal conditions, the maximum relative conversion of waste cooking oil to oxirane was achieved at 70.6%. Besides, the rate constant and activation energy for epoxidation of WCO‐PO at optimum condition were 0.0221 min−1 and 50.55 kJ mol−1, respectively. Overall, epoxidized WCO‐PO was successfully produced by using optimum process parameters of epoxidation. [ABSTRACT FROM AUTHOR]

In the current work, chloro(meso-tetrakis(phenyl)porphyrin) manganese(III) [Mn(TPP)Cl] was synthesized following two steps: the preparation of meso-tetraphenylporphyrin (H⁠2TPP) and the insertion of manganese into the free porphyrin H2TPP. The compounds were characterized using SEM, FT-IR, UV, TGA/DTA, and XRD analyses. Manganese(III) meso-porphyrins exhibited hyper-type electronic spectra with a half-vacant metal orbital with symmetry, such as [dπ:dxz and dyz]. The thermal behavior of [Mn(TPP)(Cl)] changed (three-step degradation process) compared to the initial H2TPP (one-step degradation process), confirming the insertion of manganese into the core of the free porphyrin H2TPP. Furthermore, [Mn(TPP)Cl] was used to degrade calmagite (an azo dye) using H2O2 as an oxidant. The effects of dye concentration, reaction time, H2O2 dose, and temperature were investigated. The azo dye solution was completely degraded in the presence of [Mn(TPP)(Cl)]/H2O2 at pH = 6, temperature = 20 °C, C0 = 30 mg/L, and H2O2 = 40 mL/L. The computed low activation energy (Ea = 10.55 Kj/mol) demonstrated the efficiency of the proposed catalytic system for the azo dye degradation. Overall, based on the synthesis process and the excellent catalytic results, the prepared [Mn(TPP)Cl] could be used as an effective catalyst for the treatment of calmagite-contaminated effluents. [ABSTRACT FROM AUTHOR]