Search

Osteoporosis and fragility fractures incur substantial costs to quality of life and global health care systems. The current gold standard for quantifying bone density is dual-energy X-ray absorptiometry. Our hypothesis is that bone density can be accurately predicted with a simpler method using plain radiographs of the hand. This retrospective cohort study was undertaken in two centers in the United Kingdom, where the second metacarpal cortical percentage (2MCP) scores were calculated from radiographs. This study included patients who had sustained a distal radius fracture between 2020 and 2022 and had received both a posteroanterior radiograph of the hand and a dual-energy X-ray absorptiometry scan within 12 months of their radiograph and fracture. The Pearson correlation coefficient was calculated to determine the correlation between 2MCP scores and t-scores of the femoral neck on dual-energy X-ray absorptiometry scans. Of the 188 patients, the 2MCP score significantly correlated with bone density t-scores of the femoral neck. A 2MCP score <50% demonstrated 100% sensitivity and 100% specificity for differentiating osteoporotic from normal subjects, whereas a 2MCP score <60% demonstrated 94.4% sensitivity and 83.0% specificity in differentiating osteopenic from normal subjects. These data confirm that the likelihood of osteoporosis being present can be determined via the 2MCP score. Diagnostic I. [ABSTRACT FROM AUTHOR]

In the last decade there has been incredible interest and advancement in the surgical care of adult patients with upper motor neuron (UMN) injuries. Spasticity represents a prevalent and debilitating feature of UMN syndrome, which can result from cerebral palsy, spinal cord injury, cerebrovascular accident and traumatic or anoxic brain injury. While several diagnostic tools and management strategies have been described for upper limb spasticity, evidence-based practice guidelines do not currently exist due to low patient volume and a paucity of surgeons routinely performing surgeries in UMN syndrome patients. As such, expert consensus may help provide guidance for patients, therapists and clinicians alike. In this article an expert panel was assembled, and the Delphi method was utilized to present diagnostic considerations, define operative indications, discuss surgical treatment modalities and encourage a standard set of outcome measures for patients with upper extremity spasticity. [ABSTRACT FROM AUTHOR]

Background: Distal ulna fracture fixation plates commonly cause irritation, necessitating removal, due to the narrow area between the ulna articular cartilage and the extensor carpi ulnaris. This study defines the safe zone for plate application and determines whether wrist position affects risk of impingement. Methods: Four different distal ulna anatomic plates (Acumed, Medartis, Skeletal Dynamics, and Synthes) were applied to 12 cadaveric specimens. Safe zone size was measured in circumferential distance and angular arc. Impingement was examined in flexion and extension in neutral, pronation, and supination. Results: The distal ulna safe zone has dimensions of a 92° arc and perimeter circumference of 15 mm. Cumulative extensor carpi ulnaris (ECU) impingement occurred in 0% of the 6 simulated wrist/forearm positions for the Acumed plate, 22% for the Synthes plate, 31% for the Skeletal Dynamics plate, and 68% for the Medartis plate. Impingement was most common in supination. Likelihood of ECU impingement significantly decreased in the following order; Medartis > Skeletal Dynamics > Synthes > Acumed. Conclusion: The ECU tendon's mobility can cause impingement on ulnarly placed distal ulna plates. Intra-operative testing should be performed in supination. Take home points regarding each plate from the 4 different manufacturers: contouring of Medartis plates, when placed ulnarly, is mandatory. The Acumed plate impinged the least but is not designed for far-distal fractures. The Synthes plate is least bulky but not suitable for proximal fractures. The Skeletal Dynamics plate appeared the most versatile with a reduced incidence of impingement compared to other ulnarly based plates. [ABSTRACT FROM AUTHOR]

This human cadaver study investigated whether flexor tendon repairs performed with round-bodied needles had a higher risk of pull-out compared with those performed with cutting needles. Forty human cadaver tendons were repaired (20 with each type of needle), subjected to tensile traction testing and evaluated by failure load and mode of failure. The average failure load was 50 N (SD 13 N) for tendons repaired with round-bodied needles, compared with 49 N (SD 16 N) for tendons repaired with cutting needles. Round-bodied needles resulted in more suture pull-out (18 out of 20 tendons) than cutting needles (6 out of 20 tendons). We found no differences in failure load, but significant differences in the mode of failure between round-bodied and cutting needles when used for cadaveric flexor tendon repair. [ABSTRACT FROM AUTHOR]

Background: Trigger finger has a prevalence of 2% to 3% in the general population. Although anecdotal evidence exists, there is a lack of conclusive data that prove a relationship between repetitive power grip and flexion with triggering. Ocean rowing is becoming a popular sport, with the race across the Atlantic alone attracting more than 100 participants annually. Anecdotal reports suggest ocean rowing may be a significant cause of trigger finger. We aimed to identify whether the sport causes an increased prevalence of triggering, whether there were any alleviating or compounding factors, and, finally, whether there was any effect on performance. Methods: A prospective observational study was carried out. A questionnaire was sent to all participants of the Talisker Whisky Atlantic Challenge 2018, which included a trigger finger self-scoring system and the Oslo Sports Trauma Center Overuse Injury Questionnaire. Results: Responses were received from 67 rowers (83% response rate). Age ranged from 21 to 62 years, with a mean of 40 years. In all, 49.3% had clinical triggering, with 79.3% reporting bilateral symptoms. The length of continuous rest time had a significant impact on the incidence of finger triggering and disease stage (P =.0275 and.0353, respectively; multivariate logistic regression). High-grade triggering had a more negative effect on rowing performance than low grade or no triggering (not significant). Conclusion: Ocean rowers suffered a 15-fold increase in trigger finger prevalence compared with the general population. This was increased in those who took shorter, more frequent rest periods. This study provides new conclusive evidence that the repetitive power grip and flexion involved in rowing increase the prevalence of trigger finger. [ABSTRACT FROM AUTHOR]

Once a validation training scenario had been tested, 102 images with fractures and 107 images without fracture were provided to four hand surgeons, as well as a second CNN to assess or detect fractures. The use of artificial intelligence (AI) is becoming increasingly prevalent in clinical practice. Evaluation of a convolutional neural network to identify scaphoid fractures on radiographs. [Extracted from the article]

Aims: Complete ruptures of the ulnar collateral ligament (UCL) of the thumb are a common injury, yet little is known about their current management in the UK. The objective of this study was to assess the way complete UCL ruptures are managed in the UK., Methods: We carried out a multicentre, survey-based cross-sectional study in 37 UK centres over a 16-month period from June 2022 to September 2023. The survey results were analyzed descriptively., Results: A total of 37 centres participated, of which nine were tertiary referral hand centres and 28 were district general hospitals. There was a total of 112 respondents (69 surgeons and 43 hand therapists). The strongest influence on the decision to offer surgery was the lack of a firm 'endpoint' to stressing the metacarpophalangeal joint (MCPJ) in either full extension or with the MCPJ in 30° of flexion. There was variability in whether additional imaging was used in managing acute UCL injuries, with 46% routinely using additional imaging while 54% did not. The use of a bone anchor was by far the most common surgical option for reconstructing an acute ligament avulsion (97%, n = 67) with a transosseous suture used by 3% (n = 2). The most common duration of immobilization for those managed conservatively was six weeks (58%, n = 65) and four weeks (30%, n = 34). Most surgeons (87%, n = 60) and hand therapists (95%, n = 41) would consider randomizing patients with complete UCL ruptures in a future clinical trial., Conclusion: The management of complete UCL ruptures in the UK is highly variable in certain areas, and there is a willingness for clinical trials on this subject., Competing Interests: B. J. F. Dean and M.Mikhail report a British Society for Surgery of the Hand (BSSH) pump priming grant for this study. B. J. F. Dean also reports a British Medical Association Doris Hillier grant which was unrelated to this study. B. J. F. Dean is also a member of the BSSH research committee. D. J. Beard holds a Senior Investigator grant from the National Institute for Health and Care Research, unrelated to this study. M. Mikhail reports a BSSH grant to the ULCTEAR steering group for this study, allocated under his name. N. Riley reports consulting fees from Acumend, Arthrex, and Meshworks, unrelated to this study., (© 2024 Mikhail et al.)

The aim of this prospective study was to report the psychological experiences of parents caring for children with a congenital upper limb difference and to compare these to population norms. Contributing factors were explored, including access to support and coping strategies. Finally, parents with a congenital upper limb difference themselves were compared to those without. Data recorded included demographics, a validated wellbeing and family impact measure, a unique measure of emotions experienced and exploratory questions. Wellbeing and family impact scores were significantly lower than populations norms. Mothers experienced significantly more negative emotions than fathers. There was no significant different between parents with and without a congenital upper limb difference. Of the parents, 68% felt there should be improved access to psychological support. This demonstrates that parents of children with congenital upper limb differences have unique psychological experiences and needs. They may benefit from specialist psychological support and further research is needed. Level of evidence: III., Competing Interests: Declaration of conflicting interestsThe author(s) declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The purpose of this review article is to provide an update on the realm of emerging technology available for the assessment of dynamic functional movement of the hand and upper limb. A critical overview of the literature and a conceptual framework for use of such technologies is proposed. The framework explores three broad purpose categories including customization of care, functional surveillance and interventions through biofeedback strategies. State-of-the-art technologies are described, from basic activity monitors to feedback-enabled robotic gloves, along with exemplar trials and clinical applications. The future of technologies innovation in hand pathology is proposed in the context of the current obstacles and opportunities for hand surgeons and therapists.

The use of three-dimensional (3-D) technology in upper extremity surgery has the potential to revolutionize the way that hand and upper limb procedures are planned and performed. 3-D technology can assist in the diagnosis and treatment of conditions, allowing virtual preoperative planning and surgical templating. 3-D printing can allow the production of patient-specific jigs, instruments and implants, allowing surgeons to plan and perform complex procedures with greater precision and accuracy. Previously, cost has been a barrier to the use of 3-D technology, which is now falling rapidly. This review article will discuss the current status of 3-D technology and printing, including its applications, ethics and challenges in hand and upper limb surgery. We have provided case examples to outline how clinicians can incorporate 3-D technology in their clinical practice for congenital deformities, management of acute fracture and malunion and arthroplasty.

Artificial intelligence (AI) in hand surgery is an emerging and evolving field that will likely play a large role in the future care of our patients. However, there remain several challenges to makes this technology meaningful, acceptable and usable at scale. In this review article, we discuss basic concepts in AI, including challenges and key considerations, provide an update on how AI is being used in hand and wrist surgery and propose potential future applications. The aims are to equip clinicians and researchers with the basic knowledge needed to understand and explore the incorporation of AI in hand surgery within their own practice and recommends further reading to develop knowledge in this emerging field.

Background: Three-dimensional (3D) printing technology is increasingly commercially viable for pre-surgical planning, intraoperative templating, jig creation and customised implant manufacture. The challenging nature of scaphoid fracture and nonunion surgery make it an obvious target. The aim of this review is to determine the use of 3D printed technologies in the treatment of scaphoid fractures. Methods: This is a review of the Medline, Embase and Cochrane Library databases examining studies aimed at therapeutic use of 3D printing, also known as rapid prototyping or additive technology, in the treatment of scaphoid fractures. All studies published up to and including November 2020 were included in the search. Relevant data extracted included modality of use (as template/model/guide/prosthesis), operative time, accuracy of reduction, radiation exposure, follow-up duration, time to union, complications and study quality. Results: A total of 649 articles were identified, of which 12 met the full inclusion criteria. Analysis of the articles showed that 3D printing techniques can be utilised in myriad ways to aid planning and delivery of scaphoid surgery. Percutaneous guides for Kirschner-wire (K-wire) fixation of non-displaced fractures can be created; custom guides can be printed to aid reduction of displaced or non-united fractures; patient-specific total prostheses may recreate near-normal carpal biomechanics and a simple model may help graft harvesting and positioning. Conclusions: This review found that the use of 3D printed patient-specific models and templates in scaphoid surgery can improve accuracy and speed, and reduce radiation exposure. 3D printed prostheses may also restore near-normal carpal biomechanics without burning bridges for potential future procedures. Level of Evidence: Level III (Therapeutic).

This human cadaver study investigated whether flexor tendon repairs performed with round-bodied needles had a higher risk of pull-out compared with those performed with cutting needles. Forty human cadaver tendons were repaired (20 with each type of needle), subjected to tensile traction testing and evaluated by failure load and mode of failure. The average failure load was 50 N (SD 13 N) for tendons repaired with round-bodied needles, compared with 49 N (SD 16 N) for tendons repaired with cutting needles. Round-bodied needles resulted in more suture pull-out (18 out of 20 tendons) than cutting needles (6 out of 20 tendons). We found no differences in failure load, but significant differences in the mode of failure between round-bodied and cutting needles when used for cadaveric flexor tendon repair.

Background: This study assessed the impact of the COVID-19 pandemic on acute upper limb referrals and operative case-mix at the beginning and ease of British lockdown., Methods: A longitudinal multicentre observational cohort study was conducted for both upper limb trauma referrals and operative case-mix over a 12-week period (6 weeks from the beginning and 6 weeks from the ease of the national lockdown). Statistical analysis included median (± median absolute deviation), risk and odds ratios, and Fisher's exact test to calculate the statistical significance, set at p ≤ 0.05., Results: There was a 158% (n = 456 vs. 177) increase in upper limb referrals and 133% (n = 91 vs. 39) increase in the operative trauma caseload at the ease of lockdown compared with its commencement. An increase in sporting injuries was demonstrated (p=0.02), specifically cycling (p=0.004, OR=2.58). A significant increase in COVID-19 testing was demonstrated during the ease of lockdown (p=0.0001) with more patients having their management changed during the beginning of the pandemic (9.6% vs. 0.7%, p=0.0001). Of these patients, 47% went on to have delayed surgery within 6 months. No patients who underwent surgery tested positive for COVID-19 infection within 14 days post-operatively and no mortalities were recorded at 30 days., Conclusion: The ease of lockdown has seen upper limb referrals and operations more than double compared to early lockdown. With no patients testing positive for COVID-19 within 14 days of the procedure, this demonstrates that having upper limb surgery during the current pandemic is safe., Competing Interests: The authors report no conflict of interest concerning the materials or methods used in this study or the findings specified in this paper.