Search

The increasing prevalence of microplastics (MP) in urban environments has raised concerns over their negative effects on ecosystems and human health. Stormwater runoff, and road dust and sediment, act as major vectors of these pollutants into natural water bodies. Sustainable urban drainage systems, such as permeable pavements, are considered as potential tools to retain particulate pollutants. This research evaluates at laboratory scale the efficiency of permeable interlocking concrete pavements (PICP) and porous concrete pavements (PCP) for controlling microplastics, including tire wear particles (TWP) which constitute a large fraction of microplastics in urban environments, simulating surface pollution accumulation and Mediterranean rainfall conditions. Microplastic levels in road dust and sediments and stormwater runoff inputs were 4762 ± 974 MP/kg (dry weight) and 23.90 ± 17.40 MP/L. In infiltrated effluents, microplastic levels ranged from 2.20 ± 0.61 to 5.17 ± 1.05 MP/L; while tire wear particle levels ranged between 0.28 ± 0.28 and 3.30 ± 0.89 TWP/L. Distribution of microplastics within the layers of PICP and PCP were also studied and quantified. Microplastics tend to accumulate on the pavements surface and in geotextile layers, allowing microplastic retention efficiencies from 89 % to 99.6 %. Small sized (< 0.1 mm) fragment shaped microplastics are the most common in effluent samples. The results indicate that permeable pavements are a powerful tool to capture microplastics and tire wear particles, especially by surface and geotextile layers. The study aims to shed light on the complex mobilisation mechanisms of microplastics, providing valuable insights for addressing the growing environmental concern of microplastic pollution in urban areas., Competing Interests: Declaration of competing interest Eduardo Garcia-Haba reports financial support was provided by Spain Ministry of Science and Innovation. Ignacio Andres-Domenech reports financial support was provided by Spain Ministry of Science and Innovation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Sedimentary records help chronologically identify anthropogenic contamination in environmental systems. This study analysed dated sediment cores from L'Albufera Lake (Valencia, Spain), to assess the occurrence of heavy metals (HMs), polycyclic aromatic hydrocarbons (PAHs), perfluoroalkyl substances (PFASs), organophosphorus flame retardants (OPFRs), pesticides and pharmaceuticals and personal care products (PPCPs). The results evidence the continuing vertical presence of all types of contaminants in this location. The sediment age was difficult to establish. However, the presence of shells together with an historical estimation and the knowledge of sedimentary rates could help. HMs contents are higher in the upper layer reflecting the most recent increase of the industrial and agricultural practices in the area since the middle 20th century. Higher availability index of these HMs in the upper sediment layers is associated with point and diffuse contamination sources in the area. PAHs and OPFRs were homogeneous distributed through the sediments with few exceptions such as phenanthrene in the North and fluoranthene in the South. Perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) were detected throughout the sediment core while short-chain PFASs (except perfluoropentanoic acid (PFPeA)) were detected only in the top layer. Pesticides and PPCPs showed appreciable down-core mobility. The vertical concentration profiles of organic contaminants did not exhibit a clear trend with depth, then, it is difficult to develop a direct relationship between sediment age and contaminant concentrations, and to elucidate the historical trend of contamination based on dated sediment core. Consequently, linking contaminant occurrence in sediments directly to their historical use is somewhat speculative at least in the conditions of L'Albufera Lake., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The chronological information provided by sediment cores about the beginning and evolution of anthropogenic contaminants is crucial for understanding the influence of humans on the environment. The dataset provides information about the vertical distribution of heavy metals (HMs), metalloids and various organic contaminants (OCs) including contemporary contaminants of emerging concern (CECs), such as pharmaceuticals and personal care products (PPCPs) and pesticides; as well as persistent organic contaminants (POPs) such as polycyclic aromatic hydrocarbons (PAHs), perfluoroalkyl substances (PFASs), organophosphorus flame retardants (OPFRs) in sediment cores of two different sampling areas (North and South) of L'Albufera lake. Additional information about the 14 C-data of the organic matter present in the different layers of the sediment cores, and the 14 C-data of the seashells found in some of them are shown. The dataset includes physico-chemical analyses of sediment characteristics at the different selected depth levels such as Organic Carbon (C org ), Inorganic Carbon (IC), Total Nitrogen (TN), Total Sulphur (TS) and texture. Furthermore, ecological risk assessment of these contaminants in surface sediment layers is performed to ascertain is potential toxicity. These data supplement the findings presented and considered in the research article " Exploring Organic and Inorganic Contaminant Histories in Sediment Cores Across the Anthropocene: Accounting for Site/Area Dependent Factors" . Therefore, these data altogether are useful for researchers seeking to assess long-term impact of contamination., (© 2024 The Author(s).)

Treatment wetlands (TWs) are an efficient technology for removing microplastics (MPs) from wastewater, according to previous studies. This study investigates the dynamics and fate of MPs in two wastewater treatment plants (WWTPs) using TWs, one with horizontal subsurface flow (HF) and another with a floating plant system (FS). Special attention is paid to the retention produced in the sludge and the role of macrophyte roots. The abundance of MPs in the influent to the WWTPs was on average 20.3 ± 0.85 MP/L and 8.4 ± 1.13 MP/L in HF and FS respectively, while the effluent had 0.58 ± 0.07 MP/L and 0.17 ± 0.06 MP/L, thus giving overall efficiencies of 97.42% and 98.13%, respectively. In the HF wetland, sludge samples near the inlet and the outlet were taken, distinguishing between sludge adhered to gravel and sludge attached to roots. In the floating macrophytes, sludge samples from secondary and tertiary treatments were taken. The results indicate that roots play a significant role in MPs retention. In the HF wetland, the complex formed by roots and gravel attached more MPs than gravel alone in the final zone of the wetland. In the FS, roots retained a significant quantity of MPs, both in the secondary and tertiary treatments, thus giving rise to a sludge less concentrated in MPs. This study aims to improve the knowledge of MPs behavior and fate in full-scale TWs, providing valuable information to enhance retention efficiency., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

A full-scale treatment wetland (TW) (100 inhabitants, 14 m 3 ·d -1 ), composed of two horizontal subsurface flow wetlands (TW1-400 m 2 and TW2-200 m 2 ) and a small pond (13 m 2 ), has been evaluated for Escherichia coli (E. coli) removal. The results indicate a global removal from 1.74·10 6 to 685 MPN·100 mL -1 (3.41 log units), reducing E. coli sufficiently to reach values suitable for reuse purposes such as agricultural reuse, without energy and reagent consumption. The small pond at the end of the treatment train plays an important role in E. coli removal and biodiversity enhancement. Data from TW1 and TW2 have been fitted to the P-k-C* model, giving values of 134 and 100 m·yr -1 for the first-order kinetic reaction coefficient. For the pond, a process-based model using continuous stirred-tank reactor (CSTR) and a 3d-CFD model have been implemented and compared. The models indicate that solar disinfection and predation by daphnids are the most important mechanisms in the studied pond, representing 65% and 25% of the removal respectively. It can be concluded that CSTR can provide good results for small ponds and 3d-CFD model provides extra information, useful to enhance their design., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)