Search

FEASST is an open-source Monte Carlo software package for particle-based simulations. This software, which was released in 2017, has been used to study phase equilibrium, self-assembly, aggregation or gelation in biological materials, colloids, polymers, ionic liquids, and adsorption in porous networks. We highlight some of the unique features available in FEASST, such as flat-histogram grand canonical ensemble, Gibbs ensemble, and Mayer-sampling simulations with support for anisotropic models and parallelization with flat-histogram and prefetching. We also discuss how the challenges of supporting a variety of Monte Carlo algorithms were overcome by an object-oriented design. This also allows others to extend classes, which improves software interoperability, as inspired by LAMMPS classes and user packages. This article describes version 0.25.1 with benchmarks, compilation instructions, and introductory tutorials for running, restarting, and testing simulations, user guidelines, software design strategies, alternative interfaces, and the test-driven development strategy., (© 2024 Author(s).)

We develop a multiscale coarse-grain model of the NIST Monoclonal Antibody Reference Material 8671 (NISTmAb) to enable systematic computational investigations of high-concentration physical instabilities such as phase separation, clustering, and aggregation. Our multiscale coarse-graining strategy captures atomic-resolution interactions with a computational approach that is orders of magnitude more efficient than atomistic models, assuming the biomolecule can be decomposed into one or more rigid bodies with known, fixed structures. This method reduces interactions between tens of thousands of atoms to a single anisotropic interaction site. The anisotropic interaction between unique pairs of rigid bodies is precomputed over a discrete set of relative orientations and stored, allowing interactions between arbitrarily oriented rigid bodies to be interpolated from the precomputed table during coarse-grained Monte Carlo simulations. We present this approach for lysozyme and lactoferrin as a single rigid body and for the NISTmAb as three rigid bodies bound by a flexible hinge with an implicit solvent model. This coarse-graining strategy predicts experimentally measured radius of gyration and second osmotic virial coefficient data, enabling routine Monte Carlo simulation of medically relevant concentrations of interacting proteins while retaining atomistic detail. All methodologies used in this work are available in the open-source software Free Energy and Advanced Sampling Simulation Toolkit., (© 2024 Author(s).)

The solution viscosity and protein-protein interactions (PPIs) as a function of temperature (4-40 °C) were measured at a series of protein concentrations for a monoclonal antibody (mAb) with different formulation conditions, which include NaCl and sucrose. The flow activation energy ( E η ) was extracted from the temperature dependence of solution viscosity using the Arrhenius equation. PPIs were quantified via the protein diffusion interaction parameter ( k D ) measured by dynamic light scattering, together with the osmotic second virial coefficient and the structure factor obtained through small-angle X-ray scattering. Both viscosity and PPIs were found to vary with the formulation conditions. Adding NaCl introduces an attractive interaction but leads to a significant reduction in the viscosity. However, adding sucrose enhances an overall repulsive effect and leads to a slight decrease in viscosity. Thus, the averaged (attractive or repulsive) PPI information is not a good indicator of viscosity at high protein concentrations for the mAb studied here. Instead, a correlation based on the temperature dependence of viscosity (i.e., E η ) and the temperature sensitivity in PPIs was observed for this specific mAb. When k D is more sensitive to the temperature variation, it corresponds to a larger value of E η and thus a higher viscosity in concentrated protein solutions. When k D is less sensitive to temperature change, it corresponds to a smaller value of E η and thus a lower viscosity at high protein concentrations. Rather than the absolute value of PPIs at a given temperature, our results show that the temperature sensitivity of PPIs may be a more useful metric for predicting issues with high viscosity of concentrated solutions. In addition, we also demonstrate that caution is required in choosing a proper protein concentration range to extract k D . In some excipient conditions studied here, the appropriate protein concentration range needs to be less than 4 mg/mL, remarkably lower than the typical concentration range used in the literature.

Theories of small systems play an important role in the fundamental understanding of finite size effects in statistical mechanics, as well as the validation of molecular simulation results as no computer can simulate fluids in the thermodynamic limit. Previously, a shell particle was included in the isothermal-isobaric ensemble in order to resolve an ambiguity in the resulting partition function. The shell particle removed either redundant volume states or redundant translational degrees of freedom of the system and yielded quantitative differences from traditional simulations in this ensemble. In this work, we investigate the effect of including a shell particle in the canonical, grand canonical, and Gibbs ensembles. For systems comprised of a pure component ideal gas, analytical expressions for various thermodynamic properties are obtained. We also derive the Metropolis Monte Carlo simulation acceptance criteria for these ensembles with shell particles, and the results of the simulations of an ideal gas are in excellent agreement with the theoretical predictions. The system size dependence of various important ensemble averages is also analyzed., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Molecular simulations of water adsorption in porous materials often converge slowly due to sampling bottlenecks that follow from hydrogen bonding and, in many cases, the formation of water clusters. These effects may be exacerbated in metal-organic framework (MOF) adsorbents, due to the presence of pore spaces (cages) that promote the formation of discrete-size clusters and hydrophobic effects (if present), among other reasons. In Grand Canonical Monte Carlo (MC) simulations, these sampling challenges are typically manifested by low MC acceptance ratios, a tendency for the simulation to become stuck in a particular loading state (i.e., macrostates ), and the persistence of specific clusters for long periods of the simulation. We present simulation strategies to address these sampling challenges, by applying flat-histogram MC (FHMC) methods and specialized MC move types to simulations of water adsorption. FHMC, in both Transition-matrix and Wang-Landau forms, drives the simulation to sample relevant macrostates by incorporating weights that are self-consistently adjusted throughout the simulation and generate the macrostate probability distribution (MPD). Specialized MC moves, based on aggregation-volume bias and configurational bias methods, separately address low acceptance ratios for basic MC trial moves and specifically target water molecules in clusters; in turn, the specialized MC moves improve the efficiency of generating new configurations which is ultimately reflected in improved statistics collected by FHMC. The combined strategies are applied to study the adsorption of water in CuBTC and ZIF-8 at 300 K, through examination of the MPD and the adsorption isotherm generated by histogram reweighting. A key result is the appearance of nontrivial oscillations in the MPD, which we show to be associated with water clusters in the adsorption system. Additionally, we show that the probabilities of certain clusters become similar in value near the boundaries of the isotherm hysteresis loop, indicating a strong connection between cluster formation/destruction and the thermodynamic limits of stability. For a hydrophobic MOF, the FHMC results show that the phase transition from low density to high density is suppressed to water pressure far above the bulk-fluid saturation pressure; this is consistent with results presented elsewhere. We also compare our FHMC simulation isotherm to one measured by a different technique but with ostensibly the same molecular interactions and comment on observed differences and the need for follow-up work. The simulation strategies presented here can be applied to the simulation of water in other MOFs using heuristic guidelines laid out in our text, which should facilitate the more consistent and efficient simulation of water adsorption in porous materials in future applications.

Monoclonal antibodies (mAbs) make up a major class of biotherapeutics with a wide range of clinical applications. Their physical stability can be affected by various environmental factors. For instance, an acidic pH can be encountered during different stages of the mAb manufacturing process, including purification and storage. Therefore, understanding the behavior of flexible mAb molecules in acidic solution environments will benefit the development of stable mAb products. This study used small-angle X-ray scattering (SAXS) and complementary biophysical characterization techniques to investigate the conformational flexibility and protein-protein interactions (PPI) of a model mAb molecule under near-neutral and acidic conditions. The study also characterized the interactions between Fab and Fc fragments under the same buffer conditions to identify domain-domain interactions. The results suggest that solution pH significantly influences mAb flexibility and thus could help mAbs remain physically stable by maximizing local electrostatic repulsions when mAbs become crowded in solution. Under acidic buffer conditions, both Fab and Fc contribute to the repulsive PPI observed among the full mAb at a low ionic strength. However, as ionic strength increases, hydrophobic interactions lead to the self-association of Fc fragments and, subsequently, could affect the aggregation state of the mAb.

We use molecular simulation to investigate the pH response of sequence-controlled polyampholyte brushes (PABs) with polymer chains consisting of alternating blocks of weakly acidic and basic monomers. Changes in the ionization state, height, lateral structure, and chain conformations of PABs with pH are found to differ qualitatively from those observed for polyelectrolyte brushes. Grafting density has a relatively modest effect on PAB properties. By contrast, monomer sequence strongly affects the pH response, with the extent of the response increasing with the block size. This trend is attributed to strong electrostatic attractions between oppositely charged blocks, which lead to an increase in chain backfolding as block size increases. This behavior is consistent with that observed for polyampholytes with similar monomer sequences in solution in previous studies. Our study shows that monomer sequence can be used to tune the pH response of weak PABs to generate stimuli-responsive surfaces.

Recent interest in parallelizing flat-histogram transition-matrix Monte Carlo simulations in the grand canonical ensemble, due to its demonstrated effectiveness in studying phase behavior, self-assembly and adsorption, has led to the most extreme case of single-macrostate simulations, where each macrostate is simulated independently with ghost particle insertions and deletions. Despite their use in several studies, no efficiency comparisons of these single-macrostate simulations have been made with multiple-macrostate simulations. We show that multiple-macrostate simulations are up to 3 orders of magnitude more efficient than single-macrostate simulations, which demonstrates the remarkable efficiency of flat-histogram biased insertions and deletions, even with low acceptance probabilities. Efficiency comparisons were made for supercritical fluids and vapor-liquid equilibrium of bulk Lennard-Jones and a three-site water model, self-assembling patchy trimer particles and adsorption of a Lennard-Jones fluid confined in a purely repulsive porous network, using the open source simulation toolkit FEASST. By directly comparing with a variety of Monte Carlo trial move sets, this efficiency loss in single-macrostate simulations is attributed to three related reasons. First, ghost particle insertions and deletions in single-macrostate simulations incur the same computational expense as grand canonical ensemble trials in multiple-macrostate simulations, yet ghost trials do not reap the sampling benefit from propagating the Markov chain to a new microstate. Second, single-macrostate simulations lack macrostate change trials that are biased by the self-consistently converging relative macrostate probability, which is a major component of flat histogram simulations. Third, limiting a Markov chain to a single macrostate reduces sampling possibilities. Existing parallelization methods for multiple-macrostate flat-histogram simulations are shown to be more efficient than parallel single-macrostate simulations by approximately an order of magnitude or more in all systems investigated.

Computational screening of adsorbent materials often uses the Henry's law constant ( K H ) (at a particular temperature) as a first discriminator metric due to its relative ease of calculation. The isosteric heat of adsorption in the limit of zero pressure ( q st ∞ ) is often calculated along with the Henry's law constant, and both properties are informative metrics of adsorbent material performance at low-pressure conditions. In this article, we introduce a method for extrapolating K H as a function of temperature, using series-expansion coefficients that are easily computed at the same time as K H itself; the extrapolation function also yields q st ∞ . The extrapolation is highly accurate over a wide range of temperatures when the basis temperature is sufficiently high, for a wide range of adsorbent materials and adsorbate gases. Various results suggest that the extrapolation is accurate when the extrapolation range in inverse-temperature space is limited to |β - β 0 | < 0.5 mol/kJ. Application of the extrapolation to a large set of materials is shown to be successful provided that K H is not extremely large and/or the extrapolation coefficients converge satisfactorily. The extrapolation is also able to predict q st ∞ for a system that shows an unusually large temperature dependence. The work provides a robust method for predicting K H and q st ∞ over a wide range of industrially relevant temperatures with minimal effort beyond that necessary to compute those properties at a single temperature, which facilitates the addition of practical operating (or processing) conditions to computational screening exercises.