Search

In the scenario of COVID-19, the online learning capacity has increased much more than the face to face or traditional learning. Due to the increased capacity of online learning in higher education, the quality of online learning has serious concerns. To achieve the minimum requirements of quality in online learning for sustainable development, it is important to review the quality assurance principles and strategies. A brief review of the literature was conducted to define the quality of online learning, presented some quality assurance indicators for online learning, and discussed some online learning models by selecting 27 published articles through inclusion and exclusion criteria for performing a systematic review of the literature. The review showed that learner-teacher interaction, learner's prompt feedback, learner's support service, applying appropriate media, tools for online learning, and planned documented technology application for the assurance of quality in online learning are important quality indicators. Some quality assurance models for online learning are also presented in this study for the implication of these models according to the learning requirement to ensure the online learning quality.

Digital game-based learning strategy is now widely used in various fields such as education, marketing and advertising. This learning strategy has attracted great attention from scholars and practitioners in recent years due to its effectiveness in various educational fields. As more research studies favored the constructive impact of games on the learning process, more and more investigators are dedicated to developing digital educational games to enhance learning skills for 21st century requirements. The objectives of the current investigation were: to present a comprehensive and systematic review of the literature of previous studies on the effectiveness of digital game-based learning strategy in a higher educational context; to report the role of various adult learning theories in digital game-based learning strategy; to highlight some barriers and their solutions in digital game-based learning strategy. A total of 20 previous studies on digital game-based learning strategy in higher educational perspectives published from 2008-2021 were selected by inclusion and exclusion criteria for conducting this investigation. The results of the current investigation revealed that digital game-based learning strategy has deep effects on the learning skills of the learners in higher educational perspectives. The digital game-based learning strategy is a better option for the improvement of engagement of learners towards learning and critical thinking skills.

During the current emergency of Pandemic disease of COVID-19, the importance of online learning strategy has much increased due to closure of schools, colleges and universities in most part of the globe. To evaluate the effectiveness of online learning, a statistical study has been conducted on the academic achievements of postgraduate students learned by online versus face-to-face learning modes. The statistical analysis of academic achievements of postgraduate students has been done by SPSS-20 statistical tool. The t-test analysis showed that the t-value was 0.549 and p-value was 0.583. The significance level for t-test analysis was 0.05. As, the p-value was more that 0.05 (p>0.05) so, no significant relation has been found in the academic achievements of the students learned by online and face to face modes of learning. The null hypothesis (Ho) was proved true and the alternative hypothesis (H1) rejected. The reasons for no significant relation were abruptly shifting of learning modes from face to face to online, slow working of LMS accounts due to over burden, login and voice problems during the online classes. Overall, the students performed better in the online modes of learning. Some students performed good in face-to-face learning and performed poor in online modes of learning. So, to generalize, it is necessary to do more research on online modes of learning under regional context.

Environmental pollution by heavy metals and other toxic substances has increasingly become a global health concern. Lead is a hazardous environmental contaminant that is been released to the surface causing deleterious health effects to man. Various strategies have been employed such as excavation, precipitation, and vitrification to remove lead from polluted sites. However, bioremediation of heavy metal contaminated sites has served as a cost-effective and ecofriendly tool for detoxifying and restoration of ecological entities. In this study, we reported the isolation and optimization of two novel lead-resistant isolates from active goldmine contaminated site of Anka, Zamfara state Nigeria. Results of Atomic Absorption Spectroscopy (AAS) showed higher lead concentration from the sampled sites (p

Environmental contamination, primarily driven by human activities such as industrialization, urbanization, and agricultural practices, has led to the accumulation of heavy metals, particularly molybdenum, in urban soils. This contamination adversely affects plant growth, food security, and poses health risks. This study explores the bioreduction potential of Bacillus cereus strain BUK_BCH_BTE1 in transforming toxic hexavalent molybdate to molybdenum blue which is a less toxic state. The bacterium was isolated from agricultural soil in Nigeria and identified through 16S rRNA sequencing. Factors influencing molybdate reduction were optimized, including carbon and nitrogen sources, molybdate, and phosphate concentrations. Glucose was found to be the most effective carbon source, while ammonium sulfate was the preferred nitrogen source. Molybdate reduction was most efficient at a concentration of 20 mM, and a phosphate concentration of approximately 3.5 mM was optimal. These findings contribute to understanding molybdate bioreduction and its potential application in addressing heavy metal pollution in the environment. Bacillus cereus strain BUK_BCH_BTE1 shows promise as an effective agent for molybdate bioreduction, with implications for mitigating environmental and health hazards associated with molybdenum contamination.

Fungal processes for the treatment of dye contaminated wastewater have the advantage of being cost-effective, environmentally friendly, and producing less sludge. This research was therefore aimed at isolating and characterizing fungus capable of decolourizing and utilizing azo dye (dimethyl yellow) as a sole carbon source using one-factor-at-a-time. Pour plating method was used to isolate the fungus on mineral salt media (MSM) following serial dilution. The isolate was then morphologically and molecularly identified as Aspergillus quadrilineatus strain BUK_BCH_BTE1 with the accession number OK178927 based on ITS1 and ITS2 rRNA gene sequence and molecular phylogenetic analysis. Characterization was conducted by studying the effect of temperature, incubation time, substrate concentration, pH, inoculum size and effect of heavy metals. The decolourization and growth of dimethyl yellow by the isolated Aspergillus quadrilineatus was optimal at substrate concentration of 200 μɡ/mL, temperature of 30 °C, 100–200 μL inoculum size, pH 5.0, and 72-h incubation time. The isolate was found to tolerate up to 4 ppm of Hg, Cu and Zn, with maximum inhibition shown by Cr and Ar. LC/MS analyses of the intermediate compounds produced during decolourization of dimethyl yellow suggested that in the fungal biodegradation of dimethyl yellow detected the formation of dimethyl yellow, 2,6-dichloro-p-benzoquinone, 1,2,3,5-tetrafluoro-4-nitrobenzene, and 3,4-dinitrobenzoic acid as metabolites. The finding from this study suggested that the isolate is a suitable candidate in bioremediation of coloured effluents particularly containing these compounds.

Palm oil mill effluent (POME) has a high concentration of organic matter and total suspended solids. However, improper disposal of oil refining wastes containing oils, fats, and sludge can cause environmental damage and harm human health due to their toxic, carcinogenic, and polluting effects. This research was carried out to solve the harmful effects caused by the release of POME to the environment. The goal of this study was to isolate a naturally occurring bacterium that could degrade POME and use it as a single carbon source. Bacteria were isolated from POME-contaminated medium using an enrichment technique. Judging by 16S rRNA partial gene sequencing, morphological, biochemical, and molecular identification methods, the isolated bacteria was identified as a novel Bacillus sp. The effects of substrate concentration, inoculum size, pH, temperature, and incubation time on the bacterial growth were investigated using a ''one factor at a time'' (OFAT) approach. The optimal conditions for the bacterium's growth were found to be pH 7.5, 35 °C, 20 % v/v substrate concentration, 6 % v/v inoculum size, and 96 hours of incubation. The isolate is capable of reducing 84 % of COD and 91 % of BOD from a POME sample. The high degradation potential of POME by the isolate suggests it can be used as a good option for bioremediation of POME-polluted areas.

Chlorpyrifos, being a frequently used organophosphate pesticide poses a significant threat to human health due to its prolonged presence in soil, plants, and water, this has raised concern. Consequently, researchers have shifted their attention towards finding methods to mitigate its toxicity or eliminate it from the environment. This has highlighted the importance of bioremediation. This study was aimed at analyzing and characterizing the metabolites of chlorpyrifos degradation by Bacillus sp. strain UPMB10 isolated from polluted environment using Gas Chromatography-Mass Spectrometry. The bacteria were successfully isolated utilizing the enrichment technique in mineral salt media, followed by screening to obtain the best isolate. Identification of the isolate was done at morphological, biochemical, and molecular levels, with a focus on the 16S rRNA gene. Phylogenetic analysis revealed the close relationship between the bacterium and Bacillus sp. strain UPMB10. Optimization (One Factor at A Time) was done to determine best growth conditions of the isolate. The optimal growth conditions obtained include, incubation time of 48 hours, a substrate concentration of 4 g/L, a pH of 7.0, a temperature of 37 °C, and an inoculum size of 2 % (v/v), these quantitative data revealed valuable insights into the factors affecting efficient degradation of pesticide. Gas Chromatography-Mass Spectrometry analysis demonstrated that the bacterium achieved a remarkable degradation efficiency of 99 % after 48 hours of incubation. Notably, Mesitylene and Dimethylmalonic acid were obtained as some of the metabolites of chlorpyrifos degradation. This result provides insight into the transformation of products generated during degradation process. The study finding revealed that Bacillus sp. strain UPMB10 exhibits a remarkable capacity for chlorpyrifos degradation, making it a promising candidate for bioremediation of insecticides and acaricides.

λ-cyhalothrin (LC), a frequently used synthetic pyrethroid insecticide, poses a substantial risk to human health and the environment due to its prolonged presence in plants, soil, and water. This study aimed to identify and characterize bacteria with the ability to degrade and utilize λ-cyhalothrin as their sole carbon and energy source. The bacteria were isolated by employing an enrichment technique on mineral salt media through a series of dilution steps. Strain isolated underwent identification through morphological, biochemical, and molecular analyses, specifically employing 16S rRNA and phylogenetic analysis, which disclosed its classification as Bacillus sp. With the accession number OR133746. Physio-cultural conditions, including temperature, initial substrate concentration, pH, incubation time and inoculum size affecting the strain's activity were investigated in MSM using a one-variable-at-a-time approach. The optimal conditions for bacterial growth and λ-cyhalothrin degradation was found to be a substrate concentration of 6 g/L, a temperature of 30 °C, a pH of 6.5, and an incubation time of 96 hours. The results of Gravimetric analysis revealed that the selected isolate exhibited notable degradation rates of 75.4 % and 100 % after 72 hours and 96 hours of incubation, respectively. These findings highlight the exceptional efficiency of the strain in degrading λ-cyhalothrin. Consequently, this strain emerges as a promising candidate for tackling pollution attributed to λ-cyhalothrin through bioremediation processes.

In the agricultural sector, a class of chemical compounds known as chlorinated phenol and phenoxyacetic acid are employed as herbicides, wood preservatives, and pesticides. Certain groups of chlorinated phenoxyacetic acid are used as herbicides for agricultural and domestic application. They are listed as priority pollutants by the United States Environmental Protection Agency (USEPA). Thus, this study focuses on bacterial isolation for 2,4-dichlorophenoxyacetic acid herbicide degradation been a toxic contaminant that hinders the quality of the soil over time, availability of certain soil microbes, non-targeted plants and poses health risk even to humans such as Hodking's lymphoma, respiratory infections e.t.c. These therefore, make it necessary to search for scientific way of dealing with this chemical from our environments. Incubation time, substrate concentration, pH, temperature, and inoculum size in mineral salt medium were all the parameters tested during the study, while 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide was used as the alternative source of carbon. Following systemic dilution of sample on mineral salt medium, three bacterial isolates (D1, D2, and D3), were isolated and subjected to lots of screening. D2 was proven to be the best. During molecular identification that involves polymerase chain reaction, gel electrophoresis, sequence alignment and phylogentic analysis, the isolated bacteria was found to be Achromobacter xylosoxidans. The bacterial isolate grew and degraded 2,4-dichlorophenoxyacetic acid herbicide at optimum conditions of 96 h incubation time, 0.72g L−1 substrate concentration, 7.5 pH, 40 °C temperature, and 400 μg/L inoculum size. High Performance Liquid Chromatography (HPLC) analysis of the residual 2,4-dichlorophenoxyacetic acid herbicide and the standard solution probe of the isolate was able to degrade up to 95.38 % of the substrate indicating great potentiality in bioremediation of herbicide polluted environments thereby, reducing if not all eliminating these toxic contaminants from our surroundings.

Herbal remedies are alternative option for the treatment, management, and prevention of different disease conditions such as malaria in most African communities due to their easy access and economic advantages. Heavy metals contaminations from the plant ingredients, processing or anthropogenic activities may render the herbal harmful for human consumption. Therefore, risk assessment of contaminating metals and antioxidant activities were determined in Agbo, a popular anti-malarial herbs mixture sold in Kano. The samples were collected from different locations across Kano State and labelled as A, B, C. The concentrations of some human cancer-causing (Cadmium Cd; Lead Pb and Chromium Cr) and some non-cancer-causing metals such as Copper Cu; Nickel, Ni in the sample were evaluated. The antioxidant properties were also evaluated using various assays, which include 2,2-diphenyl-2-picrylhydrazyl (DPPH), hydrogen peroxide (H2O2) scavenging actions, Metal Chelating, phosphomolybdate test and Reducing power properties of Agbo. Some phytochemicals (Phenolic acids, flavonoids, tannins, saponins and alkaloids) were found to be present. The values predicting the probability of human developing risk of cancer ailment after the ceaseless consumption of the herbal mixtures was found higher than a standard threshold limit (>10−4) established by USEPA. While the non-cancer predicted risk index projected the Cr, Pb and Cd (from sample B) as the leading metal pollutants of the herbal mixtures posing a risk index of more than one (>1), while Ni and Pb (from sample A and C) showed a relative safe quotient. The determined IC50 value for reducing power showed the herbal mixtures exhibiting almost same antioxidant activities with sample C having the highest (IC50 6.32 μg/mL), followed by sample B (IC50 6.36 μg/mL) and sample A (IC50 6.39 μg/mL). This suggests that excess consumption of this mixtures may be generally beneficial health-wise but unsafe due to the heavy metals which could expose the consumers to probable cancer risks and other biological process distraction.

Introduction/aimsIt is unknown if patients with neuromuscular diseases prefer in-person or virtual telemedicine visits. We studied patient opinions and preference on virtual versus in-person visits, and the factors influencing such preferences.MethodsTelephone surveys, consisting of 11 questions, of patients from 10 neuromuscular centers were completed.ResultsFive hundred and twenty surveys were completed. Twenty-six percent of respondents preferred virtual visits, while 50% preferred in-person visits. Sixty-four percent reported physical interaction as "very important." For receiving a new diagnosis, 55% preferred in-person vs 35% reporting no preference. Forty percent were concerned about a lack of physical examination vs 20% who were concerned about evaluating vital signs. Eighty four percent reported virtual visits were sufficiently private. Sixty eight percent did not consider expenses a factor in their preference. Although 92% were comfortable with virtual communication technology, 55% preferred video communications, and 19% preferred phone calls. Visit preference was not significantly associated with gender, diagnosis, disease severity, or symptom management. Patients who were concerned about a lack of physical exam or assessment of vitals had significantly higher odds of selecting in-person visits than no preference.DiscussionAlthough neither technology, privacy, nor finance burdened patients in our study, more patients preferred in-person visits than virtual visits and 40% were concerned about a lack of physical examination. Interactions that occur with in-person encounters had high importance for patients, reflecting differences in the perception of the patient-physician relationship between virtual and in-person visits.