Search

A molecular Kuhn-scale model is presented for the stress relaxation dynamics of entangled polymer networks. The governing equation of the model is given by the general form of the linearized Langevin equation. Based on the fluctuation-dissipation theorem, the stress relaxation modulus is derived using the normal mode representation. The entanglements are introduced as additional entropic springs connecting internal beads of the network strands. The validity of the model is assessed by comparing predicted stress relaxation modulus and viscoelastic storage and loss moduli with the estimates from molecular dynamics (MD) simulations, using the same computer models. A finite element procedure is proposed and used to assemble the network connectivity matrix, and its numerically solved eigenvalues are used to predict the linear stress relaxation dynamics. Both perfect (fully polymerized stoichiometric) and imperfect networks with different soluble and dangling structures and loops are studied using mapped Kuhn-scale network models with up to several dozen thousand Kuhn segments. It is shown that for the overlapping ranges of times and frequencies, the model predictions and MD estimates agree well., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Introduction: Recently, the use of thoracoscopic methods in spinal deformity surgery has increased, however, the issue of the effectiveness of combining anterior release with posterior spinal fusion compared to single-stage posterior instrumentation remains controversial, which raises the issue of the effectiveness and feasibility of their use., Purpose: To evaluate the effectiveness of endoscopic anterior release for thoracic scoliosis in children., Material and Method: A retrospective analysis of the results of surgical treatment of 48 patients with idiopathic scoliosis of the thoracic spine aged 12-17 years, with a thoracic curve of more than 60°, was carried out. To determine the stability of deformity, the stability index according to A.I. Kazmin was used. (SI) defined as the ratio of the angle of deformity in the supine position to the angle of deformity in the standing position. Indications for anterior release were incomplete skeletal growth and relatively stable deformities (SI 0.75-0.85). Group 1 included 27 patients operated on in one stage without anterior release, and group 2 included 21 patients in two stages, with preliminary anterior release using video-assisted thoracoscopy., Results: In group 1, the average Cobb angle of deformity was 71.8° with an average stability index of 0.8. In the second group, the average cobb angle of deformity was 69.7°, the average stability index was 0.82. In group 1 after surgery, the average Cobb angle was 27.8°, with an average correction of 63.39%. In the second group, the postoperative deformity angle was 17.4°, the average correction was 76.26%. Thus, we found a statistically significant increase in postoperative correction when using a combined anterior/posterior approach (p < 0.05)., Conclusion: In the study, in patients with relatively stable deformities, a statistically significant increase in the degree of postoperative correction was revealed (p < 0.05) when using a combined anterior/posterior approach. Performing an anterior thoracoscopic release for thoracic deformities can improve long-term results due to the formation of 360° spinal fusion at the apex of the deformity, as well as turning off the pathogenetic links in the progression of the deformity., Level of Evidence: III., Competing Interests: Conflicts of interest The authors have none to declare., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The removal of pollutants, including heavy metals, from the aquatic environment is an urgent problem worldwide. Actively developing nanotechnology areas is becoming increasingly important for solving problems in the field of the remediation of aquatic ecosystems. In particular, methods for removing pollutants using nanoparticles (NPs) are proposed, which raises the question of the effect of a combination of NPs and heavy metals on living organisms. In this work, we investigated the role of CuO-NPs in changing the toxicity of Cd and Pb salts, as well as the bioaccumulation of these elements in a culture of the microalga Desmodesmus communis . It was found that CuO-NPs at concentrations of 10, 100, and 1000 µg L -1 had no effect on the viability of microalgae cells. On the 14th day of the experiment, Cd at a concentration of 1 mg L -1 reduced the viability index by 30% and, when combined with CuO-NPs, by 25%, i.e., CuO-NPs slightly reduced the toxic effect of Cd. At the same time, in this experiment, when CuO-NPs and Cd were used together, the level of oxidative stress increased, including on the first day in mixtures with 1 mg L -1 Cd. Under the influence of Pb, the cell viability index decreased by 70% by the end of the experiment, regardless of the metal concentration. The presence of CuO-NPs slightly reduced the toxicity of Pb in terms of viability and reactive oxygen species (ROS). At the same time, unlike Cd, Pb without NPs caused ROS production on the first day, whereas the addition of CuO-NPs completely detoxified Pb at the beginning and had a dose-dependent effect on mixtures at the end of the experiment. Also, the introduction of CuO-NPs slightly reduced the negative effect of Pb on pigment synthesis. As a molecular mechanism of the observed effects, we prioritized the provocation of oxidative stress by nanoparticles and related gene expression and biochemical reactions of algae cells. Analysis of the effect of CuO-NPs on the Cd and Pb content in microalgae cells showed increased accumulation of heavy metals. Thus, when algae were cultured in an environment with Cd and CuO-NPs, the Cd content per cell increased 4.2 times compared to the variant where cells were cultured only with Cd. In the case of Pb, the increase in its content per one cell increased 6.2 times when microalgae were cultured in an environment containing CuO-NPs. Thus, we found that CuO-NPs reduce the toxic effects of Cd and Pb, as well as significantly enhance the bioaccumulation of these toxic elements in the cells of D. communis microalgae. The results obtained can form the basis of technology for the nanobioremediation of aquatic ecosystems from heavy metals using microalgae., Competing Interests: The authors declare no conflicts of interest.

Long-standing experimental data on the elastic modulus of end-linked poly(dimethylsiloxane) (PDMS) networks are employed to corroborate the validity of the Miller-Macosko theory (MMT). The validity of MMT is also confirmed by molecular dynamics (MD) simulations that mimic the experimentally realized networks. It becomes apparent that for a network formed from bulk, where the fractions of the loops are small, it is sufficient to account for the topological details of a reference tree-like network, i.e., for its degree of completion, junction functionalities, and trapped entanglements, in order to practically predict the modulus. However, a mismatch is identified between the MMT and MD simulations in relating the fraction of the soluble material to the extent of reaction. A large contribution of entanglements to the modulus of PDMS networks prepared with short precursor chains is presented, suggesting that the elastic modulus of commonly used end-linked PDMS networks is in fact entanglement-dominated., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

The Sambia Peninsula (Kaliningrad region) is historically well known for its amber mining. The 2019 year was the last year of direct overburden disposal into the Baltic Sea as a part of technological amber mining process. The extremely high-suspended particulate matter concentrations during that disposal were recorded immediately after the discharge of significant volumes of pulp and reached 200 mg/L. The impact of pulp discharge had sequentially suppressed plankton communities development due to the high content of suspended solids and afterwards stimulated plankton development due to the glauconite infusion. Cladocera were the most sensitive group to the effects of suspended matter. According to the preliminary forecast, when the pulp discharge stops, the restoration of plankton communities may take from 1 to 2 seasons to 1 year for different groups. This is due to the timing of the removal of fine suspended particulate matter from sediments and the possibility of secondary entry during resuspension., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Femoral nerve damage, especially in proximal retroperitoneal space, is rare. Therefore, surgical strategy is still unclear for these patients. Various specialists discuss repair with autografts or neurotization by the obturator nerve or its muscular branch., Objective: To demonstrate the diagnostic algorithm for proximal femoral nerve injury and favorable outcomes after repair with long autografts., Material and Methods: We assessed movements and sensitivity using a five-point scale, as well as ultrasound, magnetic resonance imaging and electroneuromyography data in a patient with extended iatrogenic femoral nerve damage before and after repair with long autografts (10.5 cm)., Results and Discussion: The patient had complete femoral nerve interruption in proximal retroperitoneal space with 10-cm defect that required repair with five autografts from two sural nerves. Postoperative ultrasound and magnetic resonance imaging revealed signs of graft survival and no neuroma within the nerve suture lines. The first signs of motor recovery occurred after 10 months. After 14 months, strength of quadriceps femoris muscle comprised 4 points, and electroneuromyography confirmed re-innervation., Conclusion: Femoral nerve repair with autografts for complete proximal anatomical interruption can provide sufficient restoration of movements and sensitivity. Therefore, this surgical option should be preferred instead of neurotization. Ultrasound, MRI and ENMG are valuable to clarify the diagnosis and state of the autografts.

In this work, we present an analysis of the antibacterial activity of TiS 3 nanostructures in water and 0.9% NaCl solution suspensions. TiS 3 nanoribbons 1-10 µm long, 100-300 nm wide, and less than 100 nm thick were produced by the direct reaction of pure titanium powder with elemental sulphur in a quartz tube sealed under vacuum. For the toxicity test of a bioluminescent strain of E. coli we used concentrations from 1 to 0.0001 g L -1 and also studied fresh suspensions and suspensions left for 24 h. The strongest toxic effect was observed in freshly prepared water solutions where the luminescence of bacteria decreased by more than 75%. When saline solution was substituted for water or when the solutions were stored for 24 h it resulted in a considerable decrease in the TiS 3 antibacterial effect. The toxicity of TiS 3 in water exceeded the toxicity of the reference TiO 2 nanoparticles, though when saline solution was used instead of water the opposite results were observed. In addition, we did not find a relationship between the antibacterial activity of water suspensions of nanoribbons and the stability of their colloidal systems, which indicates an insignificant contribution to the toxicity of aggregation processes. In 0.9% NaCl solution suspensions, toxicity increased in proportion to the increase in the zeta potential. We suppose that the noted specificity of toxicity is associated with the emission of hydrogen sulphide molecules from the surface of nanoribbons, which, depending on the concentration, can either decrease or increase oxidative stress, which is considered the key mechanism of nanomaterial cytotoxicity. However, the exact underlying mechanisms need further investigation. Thus, we have shown an important role of the dispersion medium and the period of storage in the antibacterial activity of TiS 3 nanoribbons. Our results could be used in nanotoxicological studies of other two-dimensional nanomaterials, and for the development of novel antibacterial substances and other biomedical applications of this two-dimensional material.

Broad application of CuO nanoparticles (CuO-NP) for industrial and household purposes leads to a continuous increase in their discharge to, and, hence, ever-increasing environmental hazards for aquatic ecosystems. Microalgae-based technologies hold promise for bioremediation of diverse hazardous micropollutants (HMP), including NP, from wastewater. In this study, we tested the ability of the green microalga Desmodesmus sp. to accumulate CuO-NP or their components. We also assessed the tolerance of this microalga to the environmentally relevant concentrations of CuO-NP. Using scanning electron microscopy, we demonstrated that the average size of CuO-NP was 50-100 nm, and their purity was confirmed with elemental composition analysis. Tests of the colloidal suspensions of CuO-NP showed that the hydrodynamic diameter of CuO-NP and their aggregates was below 100 nm. Flow cytometry analysis showed that CuO-NP at a concentration of 100 µg L -1 slightly inhibited the viability of microalgae cells and led to an increase in their oxidative stress. The assessment of the condition of photosystem II showed that CuO-NP exert a multifaceted effect on the photosynthetic apparatus of Desmodesmus sp., depending on the concentration of and the exposure to the CuO-NP. Desmodesmus sp. turned to be relatively tolerant to CuO-NP. In addition, the ICP-MS method revealed increased bioaccumulation of copper by microalgae cells in the experimental groups. The outcomes of this study indicate that the Desmodesmus sp. has a significant potential for bioremoval of the copper-based nanostructured HMP from an aquatic environment.

Due to their chemical, mechanical, and optical properties, 2D ultrathin nanomaterials have significant potential in biomedicine. However, the cytotoxicity of such materials, including their mutual increase or decrease, is still not well understood. We studied the effects that graphene oxide (GO) nanolayers (with dimensions 0.1-3 μm and average individual flake thickness less than 1 nm) and ZrS 3 nanoribbons (length more than 10 μm, width 0.4-3 μm, and thickness 50-120 nm) have on the viability, cell cycle, and cell death of HCT116 colon carcinoma cells. We found that ZrS 3 exhibited strong cytotoxicity by causing apoptotic cell death, which was in contrast to GO. When adding GO to ZrS 3 , ZrS 3 was significantly less toxic, which may be because GO inhibits the effects of cytotoxic hydrogen sulfide produced by ZrS 3 . Thus, using zirconium trisulfide nanoribbons as an example, we have demonstrated the ability of graphene oxide to reduce the cytotoxicity of another nanomaterial, which may be of practical importance in biomedicine, including the development of biocompatible nanocoatings for scaffolds, theranostic nanostructures, and others.

Application of new materials and methods in the diagnosis and treatment of eye diseases is one of the promising research areas in modern ophthalmology. Significant progress has been made in understanding the pathogenesis, diagnosis and treatment of eye diseases using nanotechnologies and nanomaterials. This paper presents the main achievements and results of original research on this issue. It has been shown that nanoparticles are able to overcome biological barriers, deliver drugs to the target site, and provide the required drug release rate. Modern nanotechnological approaches in tissue engineering are also being actively introduced into ophthalmology, making it possible to create nanoframeworks for growing three-dimensional cellular structures, including arrays of pigment epithelium cells and retinal ganglion cells for the treatment of retinal damage caused by degenerative diseases, injuries and infections.

To describe the COVID-19 pandemic, we propose to use a mathematical model of multifractal dynamics, which is alternative to other models and free of their shortcomings. It is based on the fractal properties of pandemics only and allows describing their time behavior using no hypotheses and assumptions about the structure of the disease process. The model is applied to describe the dynamics of the COVID-19 pandemic from day 1 to day 699 from the beginning of the pandemic. The calculated parameters of the model accurately determine the parameters of the trend and the large jump in daily diseases in this time interval. Within the framework of this model and finite-difference parametric nonlinear equations of the reduced SIR (Susceptible-Infected-Removed) model, the fractal dimensions of various segments of daily incidence in the world and variations in the main reproduction number of COVID-19 were calculated based on the data of COVID-19 world statistics., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 Published by Elsevier Ltd.)

MXenes are a family of two-dimensional (2D) composite materials based on transition metal carbides, nitrides and carbonitrides that have been attracting attention since 2011. Combination of electrical and mechanical properties with hydrophilicity makes them promising materials for biomedical applications. This review briefly discusses methods for the synthesis of MXenes, their potential applications in medicine, ranging from sensors and antibacterial agents to targeted drug delivery, cancer photo/chemotherapy, tissue engineering, bioimaging, and environmental applications such as sensors and adsorbents. We focus on in vitro and in vivo toxicity and possible mechanisms. We discuss the toxicity analogies of MXenes and other 2D materials such as graphene, mentioning the greater biocompatibility of MXenes. We identify existing barriers that hinder the formation of objective knowledge about the toxicity of MXenes. The most important of these barriers are the differences in the methods of synthesis of MXenes, their composition and structure, including the level of oxidation, the number of layers and flake size; functionalization, test concentrations, duration of exposure, and individual characteristics of biological test objects Finally, we discuss key areas for further research that need to involve new methods of nanotoxicology, including predictive computational methods. Such studies will bring closer the prospect of widespread industrial production and safe use of MXene-based products.

This review describes methods and results of studying the mechanical properties of wood at all scales: from nano- to macro-scale. The connection between the mechanical properties of material and its structure at all these levels is explored. It is shown that the existing size effects in the mechanical properties of wood, in a range of the characteristic sizes of the structure of about six orders of magnitude, correspond to the empirical Hall-Petch relation. This "law" was revealed more than 60 years ago in metals and alloys and later in other materials. The nature, as well as the particular type of the size dependences in different classes of materials can vary, but the general trend, "the smaller the stronger", remains true both for wood and for other cellulose-containing materials. The possible mechanisms of the size effects in wood are being discussed. The correlations between the mechanical and thermophysical properties of wood are described. Several examples are used to demonstrate the possibility to forecast the macromechanical properties of wood by means of contactless thermographic express methods based on measuring temperature diffusivity. The research technique for dendrochronological and dendroclimatological studies by means of the analysis of microhardness and Young's modulus radial dependences in annual growth rings is described.

Recently, metal oxide nanoparticles (NPs) have attracted attention as promising components for the protection and stimulation of plant microclones in tissue culture in vitro. However, the effect of NPs on the genetic mechanisms underlying plant adaptive responses remains poorly understood. We studied the effect of column-shaped CuO NPs 50 nm in diameter and 70-100 nm in length at a concentration of 0.1-10 mg/L on the development of phytopathogenic fungi Alternaria alternata , Fusarium oxysporum , and Fusarium avenaceum in culture, as well as on the infection of downy birch micro-clones with phytopathogens and the level of genes expression associated with the formation of plant responses to stress induced by microorganisms. CuO NPs effectively suppressed the development of colonies of phytopathogenic fungi A. alternata and F. avenaceum (up to 68.42% inhibition at 10 mg/L CuO NPs) but not the development of a colony of F. oxysporum . Exposure to the NPs caused multidirectional responses at the level of plant genes transcription: 5 mg/L CuO NPs significantly increased the expression level of the LEA8 and MYB46 genes and decreased the expression of DREB2 and PAL . Infection with A. alternata significantly increased the level of MYB46 , LEA8 , PAL , PR-1 , and PR-10 transcripts in birch micro-clones; however, upon exposure to a medium with NPs and simultaneous exposure to a phytopathogen, the expression of the MYB46 , PR-1 , and PR-10 genes decreased by 5.4 times, which is associated with a decrease in the pathogenic load caused by the effect of NPs and the simultaneous stimulation of clones in vitro. The results obtained can be used in the development of preparations based on copper oxide NPs for disinfection and stimulation of plant phytoimmunity during clonal micropropagation of tree crops.

This paper describes an experimental study of the relationships between thermal diffusivity and mechanical characteristics including Brinell hardness, microhardness, and Young's modulus of common pine ( Pinus sylvestris L.), pedunculate oak ( Quercus robur L.), and small-leaf lime ( Tilia cordata Mill.) wood. A dependence of Brinell hardness and thermal diffusivity tensor components upon humidity for common pine wood is found. The results of the measurement of Brinell hardness, microhardness, Young's modulus, and main components of thermal diffusivity tensor for three perpendicular cuts are found to be correlated. It is shown that the mechanical properties correlate better with the ratio of longitude to transversal thermal diffusivity coefficients than with the respective individual absolute values. The mechanical characteristics with the highest correlation with the abovementioned ratio are found to be the ratio of Young's moduli in longitude and transversal directions. Our technique allows a comparative express assessment of wood mechanical properties by means of a contactless non-destructive measurement of its thermal properties using dynamic thermal imaging instead of laborious and material-consuming destructive mechanical tests.