Search

A growing body of research has explored the effects of Covid-19-induced online learning on students' experiences. However, there is a lack of validated tools that measure the perceived online learning experiences of domestic and international students in various national and cultural contexts. To address this gap, this article aims to develop the Student Online Learning Experience Scale (SOLE-S). We conceptualised four potential dimensions of students' perceptions of their online learning experiences: online interactions with students, teachers, university, and technology (i.e. students' capacity to participate in online learning). Confirmatory factor analysis determined three distinct factors: online interactions with students, the university (including teachers), and technology. Based on multiple validation studies reported in this article, the 10-item SOLE-S demonstrated sound internal consistency, discriminant validity, and convergent validity. Multigroup confirmatory factor analysis on data from domestic and international students transitioning from conventional classroom learning to online learning during the COVID-19 pandemic in Italy, France, Poland, and the UK showed a stable factor structure across different cultural contexts. Bivariate and point-biserial correlation analyses revealed that the SOLE-S is associated with students' adjustment, performance, satisfaction, and loyalty to the university. This tool will assist higher education institutions in monitoring students' online learning experiences and developing relevant support structures to enhance their academic experience and well-being during the pandemic and post-pandemic online learning.

An increasing base of evidence suggests that respiratory syncytial virus (RSV) infections may be associated with neurological complications. In accord with the PRISMA statement, we performed a systematic review and meta-analysis on the occurrence of encephalitis and encephalopathy associated with documented RSV infections. PubMed, Embase, and Scopus databases were searched for eligible observational studies published up to 10 April 2024. Raw data included the occurrence of RSV infections among cases of encephalitis and/or encephalopathy and cases of encephalitis and/or encephalopathy among series of RSV infections. Data were pooled in a random effects model. Case reports were also collected, and their data pooled as a cumulative series. Heterogeneity was assessed using the I2 measure, while reporting bias was assessed by means of funnel plots and regression analysis. A total of 15 studies for a total of 7719 RSV infections and 1631 cases of encephalitis were analyzed. Moreover, 27 case reports and case series were retrieved, for a total of 84 individual cases of encephalitis/encephalopathy occurring during a documented RSV infection. A pooled prevalence of 2.20 cases of encephalitis/encephalopathy per 100 RSV cases (I2 = 99%) was calculated, while a prevalence of RSV infections among cases of encephalitis/encephalopathy was estimated to 3.53 per 100 cases for studies on respiratory specimens (I2 = 48%) and 0.37 per cases on central nervous system (CNS) specimens (I2 = 0%). Detection of RSV within the CNS was relatively rare (17.86% of pooled case reports), being associated with male gender (adjusted odds ratio [aOR] 5.021, 95% confidence interval [95%CI] 1.104 to 22.831) and recovery with long-term sequelae (aOR 5.699, 95%CI 1.152; 28.183). Case fatality ratio was estimated to be 0.43 per 100 cases on observational studies and 10.71% in case reports, a difference likely due to publication bias. In summary, RSV represented a not frequent but notable cause of encephalitis/encephalopathy in adults and children. The paucity of available studies not only recommends a cautious appraisal of our results but stresses the clinical significance of future studies on incident cases of encephalitis and/or encephalopathy.

Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) is a soft and conjugated polymer whose conductive properties can be properly tuned through doping with various additives or solvents, preserving its excellent processability. In this work PEDOT:PSS was combined with a cost-effective graphite derivative named Edge Oxidized Graphite (EOG) for developing a nanocomposite with improved electrical conductivity, with respect to the pristine PEDOT:PSS, through an easy and environmentally friendly doping process. Firstly, the EOG powders, produced by a green oxidation process of graphite, were deeply characterized through Fourier transform infrared (FT-IR), Thermogravimetric (TGA), and Wide-angle X-ray scattering (WAXD) analysis, showing that this nanofiller has oxygenated functional groups on the sheet edges. The quality and the stability of the EOG dispersions within PEDOT:PSS were investigated at different carbon-filler concentrations, up to high loading of 25 %wt/V of EOG through rheological analyses, demonstrating pseudo-plastic behavior and excellent long-term stability of the inks due to the absence of inhomogeneities and aggregates over time; in fact, the same inks were tested under the same rheological conditions after 21 days, showing the same viscosity trend for all EOG concentrations (%wt/V). Transmission electron microscopy (TEM) and (Scanning Electron microscopy) SEM investigation of spin-coated samples onto glass substrates were performed to morphologically evaluate the nanocomposites and estimate the average size of the sheets, particularly the mean length of 1.2 μm and an approximated thickness of 26 nm of the EOG sheets dispersed into the polymer matrix (PEDOT:PSS) was determined, while WAXD analysis allowed to identify the average layer number of the EOG sheets, obtaining thus, a direct measurement of the EOG sheets aspect ratio equal to 45. Finally, sheet resistance tests showed that the increasing concentration of EOG leads to a significant improvement in the electrical conductivity of the nanocomposites, from 1.1 S/cm for pristine PEDOT:PSS to 21.9 S/cm for nanocomposites with the highest EOG content (25 %wt/V). This work demonstrates the successful development of nanocomposite based on PEDOT:PSS doped with carbon-based filler synthesized through a green and cost-effective process, promoting their use in the production of bio/electrochemical sensors or optoelectronic devices.

Research has linked cultural differences between a sojourner's home and host country with their cultural transformation. Nonetheless, the results of empirical studies are inconclusive due to different operationalizations of cultural differences and testing among different groups of sojourners. We extend previous investigations by examining the effects of cultural novelty (i.e., the subjective perception of cultural differences) on the experience of international students (N = 1114) in Denmark, Germany, Italy, Poland, and the USA. Drawing on acculturation and social learning theories, we conceptualized a model of students' adjustment and satisfaction taking into account cultural novelty. We tested the model through multi-group structural equation modeling (SEM) and examined the various relationships across subsamples from all five countries. We determined the significant effects of cultural novelty and a range of factors impacting students' intercultural experience, such as their cultural intelligence, cultural background, second-language skills, time in the host country, and socialization with domestic students, and how the effects may vary by the host country. We discuss implications for future research and practice., Author(s): Michal Wilczewski [sup.1] [sup.2] , Rong Wang [sup.3] , Juana Du [sup.4] , Anne-Marie Søderberg [sup.5] , Paola Giuri [sup.6] , Terence Mughan [sup.7] , Sheila M. Puffer [sup.8] [...]

Oropouche Virus (OROV; genus of Orthobunyavirus) is the causal agent of Oropouche Fever (OF). Due to the lack of specific signs and symptoms and the limited availability of diagnostic tests, the actual epidemiology of OROV infections and OF has been extensively disputed. In this systematic review with meta-analysis, a literature search was carried out in PubMed, Scopus, EMBASE, and MedRxiv in order to retrieve relevant articles on the documented occurrence of OROV infections. Pooled detection rates were then calculated for anti-OROV antibodies and virus detection (i.e., viral RNA detected by viral cultures and/or real-time polymerase chain reaction [RT-qPCR]). Where available, detection rates for other arboviruses (i.e., Dengue [DENV], Chikungunya [CHKV], and Zika Virus [ZIKV]) were calculated and compared to those for OROV. A total of 47 studies from South America and the Caribbean were retrieved. In individuals affected by febrile illness during OROV outbreaks, a documented prevalence of 0.45% (95% confidence interval [95%CI] 0.16 to 1.12) for virus isolation, 12.21% (95%CI 4.96 to 27.09) for seroprevalence (including both IgM and IgG class antibodies), and 12.45% (95%CI 3.28 to 37.39) for the detection of OROV-targeting IgM class antibodies were eventually documented. In the general population, seroprevalence was estimated to be 24.45% (95%CI 7.83 to 55.21) for IgG class antibodies. The OROV detection rate from the cerebrospinal fluids of suspected cases of viral encephalitis was estimated to be 2.40% (95%CI 1.17 to 5.03). The occurrence of OROV infections was consistently lower than that of DENV, CHKV, and ZIKV during outbreaks (Risk Ratio [RR] 24.82, 95%CI 21.12 to 29.16; RR 2.207, 95%CI 1.427 to 3.412; and RR 7.900, 95%CI 5.386 to 11.578, respectively) and in the general population (RR 23.614, 95%CI 20.584 to 27.129; RR 3.103, 95%CI 2.056 to 4.685; and RR 49.500, 95%CI 12.256 to 199.921, respectively). In conclusion, our study stresses the possibly high underestimation of OROV prevalence in the general population of South America, the potential global threat represented by this arbovirus infection, and the potential preventive role of a comprehensive “One Health approach”.

A systematic review with a meta-analysis was performed to gather available evidence on the effectiveness of monoclonal antibody nirsevimab in the prevention of lower respiratory tract diseases (LRTDs) due to respiratory syncytial virus (RSV) in children and newborns (CRD42024540669). Studies reporting on real-world experience and randomized controlled trials (RCTs) were searched for in three databases (PubMed, Embase, and Scopus) until 1 May 2024. Our analysis included five RCTs, seven real-world reports, and one official report from the health authorities. Due to the cross-reporting of RCTs and the inclusion of multiple series in a single study, the meta-analysis was performed on 45,238 infants from 19 series. The meta-analysis documented a pooled immunization efficacy of 88.40% (95% confidence interval (95% CI) from 84.70 to 91.21) on the occurrence of hospital admission due to RSV, with moderate heterogeneity (I2 24.3%, 95% CI 0.0 to 56.6). Immunization efficacy decreased with the overall length of the observation time (Spearman’s r = −0.546, p = 0.016), and the risk of breakthrough infections was substantially greater in studies with observation times ≥150 days compared to studies lasting β = 0.001, 95% CI −0.001 to 0.002; p = 0.092). In conclusion, the delivery of nirsevimab was quite effective in preventing hospital admissions due to LRTDs. However, further analyses of the whole RSV season are required before tailoring specific public health interventions.

The church of Santa Chiara with its adjacent convent, whose foundations date back to the 13th century, is a monastic complex in the city of Nardò in the province of Lecce. The current church was built ex novo between the 17th and 18th centuries under the direction of Bishop Orazio Fortunato. Currently, there is no information about the presence of crypts or burials in the church and in the adjacent area. For this reason, a campaign of geophysical investigations was undertaken using electromagnetic, electrical resistivity and ground-penetrating radar methods. Geophysical investigations were carried out both inside and in the courtyard of the church. The results showed the presence of a series of anomalies, whose interpretation suggests important structures of probable archaeological interest.

A systematic review and meta-analysis was designed in order to ascertain the effectiveness of respiratory syncytial virus (RSV) vaccination in preventing lower respiratory tract diseases (LRTD) in older adults (age ≥ 60 years). Studies reporting on randomized controlled trials (RCTs) were searched for in three databases (PubMed, Embase, and Scopus) and the preprint repository medRxiv until 31 March 2024. A total of nine studies were eventually included, two of which were conference proceedings. Our analysis included five RCTs on five RSV vaccines (RSVpreF, RSVPreF3, Ad26.RSV.preF, MEDI7510, and mRNA-1345). The meta-analysis documented a pooled vaccine efficacy of 81.38% (95% confidence interval (95% CI) 70.94 to 88.06) for prevention of LRTD with three or more signs/symptoms during the first RSV season after the delivery of the vaccine. Follow-up data were available for RSVPreF3 (2 RSV seasons), RSVpreF (mid-term estimates of second RSV season), and mRNA-1345 (12 months after the delivery of the primer), with a pooled VE of 61.15% (95% CI 45.29 to 72.40). After the first season, the overall risk for developing RSV-related LRTD was therefore substantially increased (risk ratio (RR) 4.326, 95% CI 2.415; 7.748). However, all estimates were affected by substantial heterogeneity, as suggested by the 95% CI of I2 statistics, which could be explained by inconsistencies in the design of the parent studies, particularly when dealing with case definition. In conclusion, adult RSV vaccination was quite effective in preventing LRTD in older adults, but the overall efficacy rapidly decreased in the second season after the delivery of the vaccine. Because of the heterogenous design of the parent studies, further analyses are required before tailoring specific public health interventions.

This study focuses on the optimization of chitin oxidation in C6 to carboxylic acid and its use to obtain a hydrogel with tunable resistance. After the optimization, water-soluble crystalline β-chitin fibrils (β-chitOx) with a degree of functionalization of 10% were obtained. Diverse reaction conditions were also tested for α-chitin, which showed a lower reactivity and a slower reaction kinetic. After that, a set of hydrogels was synthesized from β-chitOx 1 wt.% at pH 9, inducing the gelation by sonication. These hydrogels were exposed to different environments, such as different amounts of Ca2+, Na+ or Mg2+ solutions, buffered environments such as pH 9, PBS, pH 5, and pH 1, and pure water. These hydrogels were characterized using rheology, XRPD, SEM, and FT-IR. The notable feature of these hydrogels is their ability to be strengthened through cation chelation, being metal cations or hydrogen ions, with a five- to tenfold increase in their storage modulus (G’). The ions were theorized to alter the hydrogen-bonding network of the polymer and intercalate in chitin’s crystal structure along the a-axis. On the other hand, the hydrogel dissolved at pH 9 and pure water. These bio-based tunable hydrogels represent an intriguing material suitable for biomedical applications.

With the rise of global warming and the growing energy crisis, scientists have pivoted from typical resources to look for new materials and technologies. Perovskite materials hold the potential for making high-efficiency, low-cost solar cells through solution processing of Earth-abundant materials; however, scalability, stability, and durability remain key challenges. In order to transition from small-scale processing in inert environments to higher throughput processing in ambient conditions, the fundamentals of perovskite crystallization must be understood. Classical nucleation theory, the LaMer relation, and nonclassical crystallization considerations are discussed to provide a mechanism by which a gellan gum (GG) additive—a nontoxic polymeric saccharide—has enabled researchers to produce quality halide perovskite thin-film blade coated in ambient conditions without a quench step. Furthermore, we report on the improved stability and durability properties inherent to these films, which feature improved morphologies and optoelectronic properties compared to films spin-coated in a glovebox with antisolvent. We tune the amount of GG in the perovskite precursor and study the interplay between GG concentration and processability, morphological control, and increased stability under humidity, heat, and mechanical testing. The simplicity of this approach and insensitivity to environmental conditions enable a wide process window for the production of low-defect, mechanically robust, and operationally stable perovskites with fracture energies among the highest obtained for perovskites.

We present the case of an 84-year-old female patient admitted to the Internal Medicine Ward for atypical chest pain and laboratory findings of severe pancytopenia. Past medical history was remarkable for an episode of myocardial infarction approximately 4 weeks prior to the current hospitalization which had required angioplasty + drug-eluting stent and dual antiplatelet therapy with acetylsalicylic acid and clopidogrel. Some rare cases of clopidogrel-induced pancytopenia are described in scientific literature, therefore, after excluding infectious, vitamin deficiencies, and autoimmune causes, we modified the antiplatelet therapy by replacing clopidogrel with ticagrelor, obtaining complete leukocyte recovery within a few days. Since clopidogrel is an antiplatelet drug still used in clinical cardiological practice, the knowledge of this rare side effect may lead the clinician to suspect hematological toxicity which, if recognized promptly, may suggest modification of antiplatelet therapy and limit any possible infectious complications for the care of the patient.

Abstract High sensitivity and efficient X‐ray detectors are needed to promote and boost their application as tools in medical diagnostics and radiotherapy. Lead halide perovskites have emerged recently as a novel class of material for efficient X‐ray detection. Although 3D perovskites possess very interesting optoelectronic properties they suffer from low environmental and operational stability. Here a strategy based on using starch as a polymeric template for the fabrication of stable thin film perovskite X‐ray detectors is reported. The proposed p‐i‐n photodiodes can operate with no external bias applied (fully passive devices), reaching a top sensitivity of 5.5 ± 0.2 µC Gy−1 s−1. The device degradation is monitored for samples stored in air for a time window of 630 days, demonstrating exceptional stability: 97% of the initial sensitivity is retained for the best perovskite‐starch composite formulation making it the most stable unencapsulated perovskite X‐ray detector reported so far.

Lunar light plains (LPs) are globally distributed, smooth and flat geologic units occurring in crater floors and topographic lows, similar in morphology to mare basalts, but with moderate to high albedo. Despite numerous studies investigating LPs, their emplacement mechanism(s), ages, and origins remain highly debated. To aid in deciphering their origin(s), we produced a new independent global map of the extent of the LPs. Thus, we (1) evaluated the morphological and compositional definitions of LP; (2) tested the reproducibility of previous work; and (3) extended the previously mapped extents of LPs. We find morphological similarities between near- and farside LPs with regional variations in albedo and FeO contents. We were able to reproduce the majority of previous LP maps, with some notable exceptions. We find ∼13% of the lunar surface is covered by LPs, which is slightly higher than previous studies, likely due to our inclusion of smaller deposits. Overall, the distribution of LPs on the nearside appears to be denser around mare regions and exhibits more widely varying degrees of smoothness, size, albedo, and FeO contents compared to the farside highlands. In contrast, on the farside, we find a large number of LPs with similar morphologies and FeO contents, in ray-like patterns likely related to the Orientale impact event. Beyond Orientale’s influence, the occurrences of LPs are of lower albedo and FeO contents are fewer and sparser, with similar morphologies to the nearside deposits. Thus, our study indicates that an impact-related origin for the majority of LP deposits is most likely.

In order to move towards large-scale fabrication, perovskite solar cells need to detach themselves from strictly controlled environmental conditions and, to this end, fabrication in ambient air is highly desirable. Formamidinium iodide perovskite (FAPI) is one of the most promising perovskites but is also unstable at room temperature, which may make the ambient air deposition more difficult. Herein, we investigated different formulations of pure FAPI for the fabrication of perovskite solar cells (PSCs) in air. We found that formulations using a mixture of N,N-Dimethylformamide (DMF): N-methyl-2-pyrrolidone (NMP) and only dimethyl sulfoxide (DMSO) are suitable for the deposition in air. To fabricate inverted p-i-n solar cells, we tested different hole transporting layers (HTLs) and observed the effects on the wettability of the perovskite solution and on the performance. A self-assembly monolayer of 2PACz (2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) was found to be the best option as a HTL, allowing us to achieve efficiencies >15% on both FTO and ITO.

Abstract Background Left uterine displacement (LUD) has been questioned as an effective strategy to prevent aortocaval compression after spinal anesthesia (SA) for cesarean delivery (CD). We tested if LUD has a significant impact on cardiac output (CO) in patients undergoing CD under SA during continuous non-invasive hemodynamic monitoring with Clearsight. Methods Forty-six patients were included in the final analysis. We considered 4 timepoints of 5 min each: T1 = baseline with LUD; T2 = baseline without LUD; T3 = after SA with LUD; T4 = after SA without LUD. LUD was then repositioned for CD. The primary outcome was to assess if CO decreased from T3 to T4 of at least 1.0 L/min. We also compared CO between T1 and T2 and other hemodynamic variables: mean, systolic and diastolic blood pressure (respectively MAP, SAP and DAP), heart rate (HR), stroke volume (SV), stroke volume variation (SVV), pulse pressure variation (PPV), contractility (dP/dt), dynamic arterial elastance (Eadyn) at the different timepoints. Data on fetal Apgar scores and umbilical arterial and venous pH were collected. Results CO did not vary from T3 to T4 (CO mean difference -0.02 L/min [95% CI -0.88 to 0.82; P = 1). No significant variation was registered for any variable at any timepoint. Conclusions LUD did not show a significant impact on CO during continuous hemodynamic monitoring after SA for CD. Trial registration (retrospectively registered on 03/12/2021) NCT05143684 .

Oropouche Virus (OROV; genus of Orthobunyavirus) is the causal agent of Oropouche Fever (OF). Due to the lack of specific signs and symptoms and the limited availability of diagnostic tests, the actual epidemiology of OROV infections and OF has been extensively disputed. In this systematic review with meta-analysis, a literature search was carried out in PubMed, Scopus, EMBASE, and MedRxiv in order to retrieve relevant articles on the documented occurrence of OROV infections. Pooled detection rates were then calculated for anti-OROV antibodies and virus detection (i.e., viral RNA detected by viral cultures and/or real-time polymerase chain reaction [RT-qPCR]). Where available, detection rates for other arboviruses (i.e., Dengue [DENV], Chikungunya [CHKV], and Zika Virus [ZIKV]) were calculated and compared to those for OROV. A total of 47 studies from South America and the Caribbean were retrieved. In individuals affected by febrile illness during OROV outbreaks, a documented prevalence of 0.45% (95% confidence interval [95%CI] 0.16 to 1.12) for virus isolation, 12.21% (95%CI 4.96 to 27.09) for seroprevalence (including both IgM and IgG class antibodies), and 12.45% (95%CI 3.28 to 37.39) for the detection of OROV-targeting IgM class antibodies were eventually documented. In the general population, seroprevalence was estimated to be 24.45% (95%CI 7.83 to 55.21) for IgG class antibodies. The OROV detection rate from the cerebrospinal fluids of suspected cases of viral encephalitis was estimated to be 2.40% (95%CI 1.17 to 5.03). The occurrence of OROV infections was consistently lower than that of DENV, CHKV, and ZIKV during outbreaks (Risk Ratio [RR] 24.82, 95%CI 21.12 to 29.16; RR 2.207, 95%CI 1.427 to 3.412; and RR 7.900, 95%CI 5.386 to 11.578, respectively) and in the general population (RR 23.614, 95%CI 20.584 to 27.129; RR 3.103, 95%CI 2.056 to 4.685; and RR 49.500, 95%CI 12.256 to 199.921, respectively). In conclusion, our study stresses the possibly high underestimation of OROV prevalence in the general population of South America, the potential global threat represented by this arbovirus infection, and the potential preventive role of a comprehensive "One Health approach". [ABSTRACT FROM AUTHOR]

Geophysics is a fundamental tool to detect buried structures of archaeological interest through non-destructive techniques. The Messapian city walls in Ugento (Puglia, southern Italy) are of great archaeological importance, and some sections are still visible. In order to locate a stretch of the city walls, geophysical prospections were performed using the low-frequency electromagnetic method and ground-penetrating radar. The surveys were carried out in a peripheral area of Ugento, near a visible section of the city walls. The analysis and interpretation of the measured data revealed clear anomalies that could be ascribed to the city walls that aligned with an adjacent section of the visible walls. Archaeological excavation campaigns found a part of the walls and some important elements, as identified by the geophysical data interpretation. [ABSTRACT FROM AUTHOR]

An increasing base of evidence suggests that respiratory syncytial virus (RSV) infections may be associated with neurological complications. In accord with the PRISMA statement, we performed a systematic review and meta-analysis on the occurrence of encephalitis and encephalopathy associated with documented RSV infections. PubMed, Embase, and Scopus databases were searched for eligible observational studies published up to 10 April 2024. Raw data included the occurrence of RSV infections among cases of encephalitis and/or encephalopathy and cases of encephalitis and/or encephalopathy among series of RSV infections. Data were pooled in a random effects model. Case reports were also collected, and their data pooled as a cumulative series. Heterogeneity was assessed using the I2 measure, while reporting bias was assessed by means of funnel plots and regression analysis. A total of 15 studies for a total of 7719 RSV infections and 1631 cases of encephalitis were analyzed. Moreover, 27 case reports and case series were retrieved, for a total of 84 individual cases of encephalitis/encephalopathy occurring during a documented RSV infection. A pooled prevalence of 2.20 cases of encephalitis/encephalopathy per 100 RSV cases (I2 = 99%) was calculated, while a prevalence of RSV infections among cases of encephalitis/encephalopathy was estimated to 3.53 per 100 cases for studies on respiratory specimens (I2 = 48%) and 0.37 per cases on central nervous system (CNS) specimens (I2 = 0%). Detection of RSV within the CNS was relatively rare (17.86% of pooled case reports), being associated with male gender (adjusted odds ratio [aOR] 5.021, 95% confidence interval [95%CI] 1.104 to 22.831) and recovery with long-term sequelae (aOR 5.699, 95%CI 1.152; 28.183). Case fatality ratio was estimated to be 0.43 per 100 cases on observational studies and 10.71% in case reports, a difference likely due to publication bias. In summary, RSV represented a not frequent but notable cause of encephalitis/encephalopathy in adults and children. The paucity of available studies not only recommends a cautious appraisal of our results but stresses the clinical significance of future studies on incident cases of encephalitis and/or encephalopathy. [ABSTRACT FROM AUTHOR]

Low-molecular-weight peptide gelators are a versatile class of compounds able to form gels under a variety of conditions, even via simple ultrasound sonication. In this paper, the ability of Boc-L-Phe-D-Oxd-L-Phe-OBn to gelate three organic solvents (toluene, tert-butyl methyl ether, and ethanol) was evaluated. The rheological behaviour of the materials was assessed via strain sweep analysis, while the fibrous network was analysed via optical microscopy on the wet gels. The gel obtained from toluene is a highly transparent material, and the one from ethanol appears translucent, while the one from tert-butyl methyl ether is opaque. These gels were used to study the reversible light-induced transformation from spyropiran (SP) to merocyanine (MC) and back, as a model system to check the effect of the gel medium onto the rection kinetic. We observed that the solvent used to form the organogels has a crucial effect on the reaction, as gels from aprotic solvents stabilize the SP form, while the ones from protic solvents stabilize the MC form. We thus obtained a solid support to stabilize the two photochromic species just by changing the solvent polarity. Moreover, we could demonstrate that the self-assembled gels do not interfere with the light-driven conversion process, either starting from SP or MC, thus representing a valid and economical photochromic material.

The search for alternative ways to give a second life to materials paved the way for detailed investigation into three silica-polyethylenimine (Si-PEI) materials for the purpose of CO2 adsorption in carbon capture and storage. A solvent extraction procedure was investigated to recover degraded PEIs and silica, and concomitantly, pyrolysis was evaluated to obtain valuable chemicals such as alkylated pyrazines. An array of thermal (TGA, Py-GC-MS), mechanical (rheology), and spectroscopical (ATR-FTIR, 1H-13C-NMR) methods were applied to PEIs extracted with methanol to determine the relevant physico-chemical features of these polymers when subjected to degradation after use in CO2 capture. Proxies of degradation associated with the plausible formation of urea/carbamate moieties were revealed by Py-GC-MS, NMR, and ATR-FTIR. The yield of alkylpyrazines estimated by Py-GC-MS highlighted the potential of exhausted PEIs as possibly valuable materials in other applications.

The exploitation of methylammonium lead iodide perovskite-polymer composites is a promising strategy for the preparation of photoactive thin layers for solar cells. The preparation of these composites is a simple fabrication method with improved moisture stability when compared to that of pristine perovskite films. To deepen the understanding of the charge transport properties of these films, we investigated charge carrier mobility, traps, and ion migration. For this purpose, we applied a combinatory measurement approach that proves how such composites can still retain an ambipolar charge transport nature and the same mobility values of the related perovskite. Furthermore, thermally stimulated current measurements revealed that the polymer influenced the creation of additional defects during film formation without affecting charge mobility. Finally, impedance spectroscopy measurements suggested the addition of starch may hinder ion migration, which would require larger activation energies to move ions in composite films. These results pave the way for new strategies of polymer-assisted perovskite film development.