Search

The purpose of this descriptive study was to examine school string teachers' beliefs about and practices of teaching nontraditional music courses. We surveyed middle and high school string teachers (N = 42) about what nontraditional music courses and ensembles (NMCEs) they currently offer and would like to offer to their students. In addition, we examined the educational rationales that string teachers have for offering NMCEs. Our findings indicated that the most frequently offered NMCEs were guitar class, pit orchestra, and music technology. Participants expressed strongest interest in adding fiddle club, popular music, and mariachi ensemble. The participants explained that NMCEs provide opportunities to teach content that closely may more reflect students' cultures and possibly attract a wider range of students. The participants used NMCEs to cultivate musical skills that are often overlooked in large-group setting, including improvisation, playing by ear, and collaborative arranging and composition.

Abstract Obesity adversely affects bone and fat metabolism in mice and humans. Omega-3 polyunsaturated fatty acids (omega-3 PUFAs) have been shown to improve glucose metabolism and bone homeostasis in obesity. However, the impact of omega-3 PUFAs on bone marrow adipose tissue (BMAT) and bone marrow stromal cell (BMSC) metabolism has not been intensively studied yet. In the present study we demonstrated that omega-3 PUFA supplementation in high fat diet (HFD + F) improved bone parameters, mechanical properties along with decreased BMAT in obese mice when compared to the HFD group. Primary BMSCs isolated from HFD + F mice showed decreased adipocyte and higher osteoblast differentiation with lower senescent phenotype along with decreased osteoclast formation suggesting improved bone marrow microenvironment promoting bone formation in mice. Thus, our study highlights the beneficial effects of omega-3 PUFA-enriched diet on bone and cellular metabolism and its potential use in the treatment of metabolic bone diseases.

Recent studies highlighted the crucial contribution of subchondral bone to OA development. Yet, only limited data have been reported on the relation between alteration to cartilage morphology, structural properties of the subchondral bone plate (SBP) and underlying subchondral trabecular bone (STB). Furthermore, the relationship between the morphometry of the cartilage and bone in the tibial plateau and the OA-induced changes in the joint’s mechanical axis remains unexplored. Therefore, a visualisation and quantification of cartilage and subchondral bone microstructure in the medial tibial plateau was performed. End stage knee-OA patients with varus alignment and scheduled for total knee arthroplasty (TKA) underwent preoperative fulllength radiography to measure the hip-knee-ankle angle (HKA) and the mechanical-axis deviation (MAD). 18 tibial plateaux were μ-CT scanned (20.1 μm/voxel). Cartilage thickness, SBP, and STB microarchitecture were quantified in 10 volumes of interest (VOIs) in each medial tibial plateau. Significant differences (p < 0.001) were found for cartilage thickness, SBP, and STB microarchitecture parameters among the VOIs. Closer to the mechanical axis, cartilage thickness was consistently smaller, while SBP thickness and STB bone volume fraction (BV/TV) were higher. Moreover, trabeculae were also more superior-inferiorly oriented, i.e. perpendicular to the transverse plane of the tibial plateau. As cartilage and subchondral bone changes reflect responses to local mechanical loading patterns in the joint, the results suggested that region-specific subchondral bone adaptations were related to the degree of varus deformity. More specifically, subchondral sclerosis appeared to be most pronounced closer to the mechanical axis of the knee.

Abstract Spearing mantis shrimps are aggressive crustaceans using specialized appendages with sharp spikes to capture fishes with fast movement. Each spike is a biological tool that has to combine high toughness, as required by the initial impact with the victim, with high stiffness and strength, to ensure sufficient penetration while avoid breaking. We performed a multimodal analysis to uncover the design strategies of this harpoon based on chitin. We found that the spike is a slightly hooked hollow beam with the outer surface decorated by serrations and grooves to enhance cutting and interlocking. The cuticle of the spike resembles a multilayer composite: An outer heavily mineralized, stiff, and hard region (with average indentation modulus and hardness of 68 and 3 GPa), providing high resistance to contact stresses, is combined with a less mineralized region, which occupies a large fraction of the cuticle (up to 50%) and features parallel fibers oriented longitudinally, enhancing stiffness and strength. A central finding of our work is the presence of a tiny interphase (less than 10 μm in width) based on helical fibers and showing a spatial modulation in mechanical properties, which has the critical task to integrate the stiff but brittle outer layer with the more compliant highly anisotropic parallel‐fiber region. We highlighted the remarkable ability of this helicoidal region to stop nanoindentation‐induced cracks. Using three‐dimensional multimaterial printing to prototype spike‐inspired composites, we showed how the observed construction principles can not only hamper damage propagation between highly dissimilar layers (resulting in composites with the helical interphase absorbing 50% more energy than without it) but can also enhance resistance to puncture (25% increase in the force required to penetrate the composites with a blunt tool). Such findings may provide guidelines to design lightweight harpoons relying on environmentally friendly and recyclable building blocks. Key Points –The heavily mineralized biological appendages of the mantis shrimp are a constant source of inspiration for developing new engineering materials. –We use characterization methods of material science to investigate a biological harpoon based on chitin. –Several morphological, compositional, microstructural, and biomechanical features are highlighted, allowing the spikes of the mantis shrimp to be remarkable lightweight, tough, and stiff harpoons.

ABSTRACT: Segmental defects affecting the continuity of the mandible have a profound impact on a patient's quality of life. Adequate reconstruction of such continuity defects is essential to restore aesthetics and function. While reconstruction using an autologous bone transplant supported by a stock reconstruction plate is the gold standard treatment, it has various drawbacks that can be attested to the plates’ off-the-shelf nature.To mitigate these drawbacks, this study develops a patient-specific implant for the reconstruction of Brown class II defects with a high ramal osteotomy. The implant is intended to be additively manufactured in Ti6Al4V grade 23 ELI and features porous scaffold zones at the symphyseal and condylar sides which can induce bone ingrowth.Finite element (FE) analyses were used to assess the implants’ performance in terms of failure, stability and stress shielding by simulating four clenching tasks. In addition, the implant was topologically optimized and re-evaluated.The results showed that the implant experienced stress below its yield strength and fatigue limit. Relative micromotions between the implant and the bone indicated adequate stability to allow bone ingrowth to occur. Strains in the bone indicated limited stress shielding should occur between screw connections and around the osteotomy planes.Finally, topological optimization reduced implant volume by 49% compared to the initial design, while FE analyses showed similar performance to the original design. The resulting implant is a promising first prototype that is numerically evaluated and can be optimized further in terms of fixation, surgical approach and dental restoration by in situ testing.

Abstract Femoroplasty is a procedure where bone cement is injected percutaneously into a weakened proximal femur. Uncertainty exists whether femoroplasty provides sufficient mechanical strengthening to prevent fractures in patients with femoral bone metastases. Finite element models are promising tools to evaluate the mechanical effectiveness of femoroplasty, but a thorough validation is required. This study validated a voxel-based finite element model against experimental data from eight pairs of human cadaver femurs with artificial metastatic lesions. One femur from each pair was left untreated, while the contralateral femur was augmented with bone cement. Finite element models accurately predicted the femoral strength in the defect (R2 = 0.96) and augmented (R2 = 0.93) femurs. The modelled surface strain distributions showed a good qualitative match with results from digital image correlation; yet, quantitatively, only moderate correlation coefficients were found for the defect (mean R2 = 0.78) and augmented (mean R2 = 0.76) femurs. This was attributed to the presence of vessel holes in the femurs and the jagged surface representation of our voxel-based models. Despite some inaccuracies in the surface measurements, the FE models accurately predicted the global bone strength and qualitative deformation behavior, both before and after femoroplasty. Hence, they can offer a useful biomechanical tool to assist clinicians in assessing the need for prophylactic augmentation in patients with metastatic bone disease, as well as in identifying suitable patients for femoroplasty.

HR-pQCT has become standard practice when quantifying volumetric BMD (vBMD) in vivo. Yet, it is only accessible to peripheral sites, with small fields of view and lengthy scanning times. This limits general applicability in clinical workflows. The goal of this study was to assess the potential of photon counting CT (PCCT) in quantitative bone imaging. Using the European Forearm Phantom, PCCT was calibrated to hydroxyapatite (HA) density. Eight cadaveric forearms were scanned twice with PCCT and once with HR-pQCT. The dominant forearm of two volunteers was scanned twice with PCCT. In each scan, the carpals were delineated. At bone level, accuracy was assessed with a paired measurement of total vBMD (Tt.vBMD) calculated with PCCT and HR-pQCT. At voxel-level, repeatability was assessed by image registration and voxel-wise subtraction of the ex vivo PCCT scans. In an ideal scenario, this difference would be zero; any deviation was interpreted as falsely detected remodeling. For clinical usage, the least detectable remodeling was determined by finding a threshold in the PCCT difference image that resulted in a classification of bone formation and resorption below acceptable noise levels (<0.5%). The paired measurement of Tt.vBMD had a Pearson correlation of 0.986. Compared to HR-pQCT, PCCT showed a bias of 7.46 mgHA/cm3. At voxel-level, the repeated PCCT scans showed a bias of 17.66 mgHA/cm3 and a standard error of 96.23 mgHA/cm3. Least detectable remodeling was found to be 250 mgHA/cm3, for which 0.37% of the voxels was incorrectly classified as newly added or resorbed bone. In vivo , this volume increased to 0.97%. Based on the cadaver data, we conclude that PCCT can be used to quantify vBMD and bone turnover. We provided proof of principle that this technique is also accurate in vivo , hence, that it has high potential for clinical applications. [ABSTRACT FROM AUTHOR]

Objective: The use of thiazolidinediones (TZDs) as insulin sensitizers has been shown to have side effects including increased accumulation of bone marrow adipocytes (BMAds) associated with a higher fracture risk and bone loss. A novel TZD analog MSDC-0602K with low affinity to PPARγ has been developed to reduce adverse effects of TZD therapy. However, the effect of MSDC-0602K on bone phenotype and bone marrow mesenchymal stem cells (BM-MSCs) in relation to obesity has not been intensively studied yet. Methods: Here, we investigated whether 8-week treatment with MSDC-0602K has a less detrimental effect on bone loss and BM-MSC properties in obese mice in comparison to first generation of TZDs, pioglitazone. Bone parameters (bone microstructure, bone marrow adiposity, bone strength) were examined by μCT and 3-point bending test. Primary BM-MSCs were isolated and measured for osteoblast and adipocyte differentiation. Cellular senescence, bioenergetic profiling, nutrient consumption and insulin signaling were also determined. Results: The findings demonstrate that MSDC-0602K improved bone parameters along with increased proportion of smaller BMAds in tibia of obese mice when compared to pioglitazone. Further, primary BM-MSCs isolated from treated mice and human BM-MSCs revealed decreased adipocyte and higher osteoblast differentiation accompanied with less inflammatory and senescent phenotype induced by MSDC-0602K vs. pioglitazone. These changes were further reflected by increased glycolytic activity differently affecting glutamine and glucose cellular metabolism in MSDC-0602K-treated cells compared to pioglitazone, associated with higher osteogenesis. Conclusion: Our study provides novel insights into the action of MSDC-0602K in obese mice, characterized by the absence of detrimental effects on bone quality and BM-MSC metabolism when compared to classical TZDs and thus suggesting a potential therapeutical use of MSDC-0602K in both metabolic and bone diseases.

Spearing mantis shrimps are aggressive crustaceans using specialized appendages with sharp spikes to capture fishes with fast movement. Each spike is a biological tool that has to combine high toughness, as required by the initial impact with the victim, with high stiffness and strength, to ensure sufficient penetration while avoid breaking.We performed a multimodal analysis to uncover the design strategies of this harpoon based on chitin. We found that the spike is a slightly hooked hollow beam with the outer surface decorated by serrations and grooves to enhance cutting and interlocking. The cuticle of the spike resembles a multilayer composite: An outer heavily mineralized, stiff, and hard region (with average indentation modulus and hardness of 68 and 3 GPa), providing high resistance to contact stresses, is combined with a less mineralized region, which occupies a large fraction of the cuticle (up to 50%) and features parallel fibers oriented longitudinally, enhancing stiffness and strength. A central finding of our work is the presence of a tiny interphase (less than 10 μm in width) based on helical fibers and showing a spatial modulation in mechanical properties, which has the critical task to integrate the stiff but brittle outer layer with the more compliant highly anisotropic parallel-fiber region.We highlighted the remarkable ability of this helicoidal region to stop nanoindentation-induced cracks.Using three-dimensional multimaterial printing to prototype spike-inspired composites, we showed how the observed construction principles can not only hamper damage propagation between highly dissimilar layers (resulting in composites with the helical interphase absorbing 50% more energy than without it) but can also enhance resistance to puncture (25% [ABSTRACT FROM AUTHOR]

The goal of this study was twofold. First, we aimed to evaluate the accuracy of a finite element (FE) model to predict bone fracture in cancer patients with proximal femoral bone metastases. Second, we evaluated whether femoroplasty could effectively reduce fracture risk. A total of 89 patients were included, with 101 proximal femurs affected with bone metastases. The accuracy of the model to predict fracture was evaluated by comparing the FE failure load, normalized for body weight, against the actual occurrence of fracture during a 6‐month follow‐up. Using a critical threshold, the model could identify whether femurs underwent fracture with a sensitivity of 92% and a specificity of 66%. A virtual treatment with femoroplasty was simulated in a subset of 34 out of the 101 femurs; only femurs with one or more well‐defined lytic lesions were considered eligible for femoroplasty. We modeled their lesions, as well as the surrounding 4 mm of trabecular bone, to be augmented with bone cement. The simulation of femoroplasty increased the median failure load of the FE model by 57% for lesions located in the head/neck of the femur. At this lesion location, all high risk femurs that had fractured during follow‐up effectively moved from a failure load below the critical threshold to a value above. For lesions located in the trochanteric region, no definite improvement in failure load was found. Although additional validation studies are required, our results suggest that femoroplasty can effectively reduce fracture risk for several osteolytic lesions in the femoral head/neck. [ABSTRACT FROM AUTHOR]

Introduction: Metastases increase the risk of fracture when affecting the femur. Consequently, clinicians need to know if the patient's femur can withstand the stress of daily activities. The current tools used in clinics are not sufficiently precise. A new method, the CT-scan-based finite element analysis, gives good predictive results. However, none of the existing models were tested for reproducibility. This is a critical issue to address in order to apply the technique on a large cohort around the world to help evaluate bone metastatic fracture risk in patients. The aim of this study is then to evaluate 1) the reproducibility 2) the transposition of the reproduced model to another dataset and 3) the global sensitivity of one of the most promising models of the literature (original model)., Methods: The model was reproduced based on the paper describing it and discussion with authors to avoid reproduction errors. The reproducibility was evaluated by comparing the results given in the original model by the original first team (Leuven, Belgium) and the reproduced model made by another team (Lyon, France) on the same dataset of CT-scans of ex vivo femurs. The transposition of the model was evaluated by comparing the results of the reproduced model on two different datasets. The global sensitivity analysis was done by using the Morris method and evaluates the influence of the density calibration coefficient, the segmentation, the orientations and the length of the femur., Results: The original and reproduced models are highly correlated (r 2  = 0.95), even though the reproduced model gives systematically higher failure loads. When using the reproduced model on another dataset, predictions are less accurate (r 2 with the experimental failure load decreases, errors increase). The global sensitivity analysis showed high influence of the density calibration coefficient (mean variation of failure load of 84 %) and non-negligible influence of the segmentation, orientation and length of the femur (mean variation of failure load between 7 and 10 %)., Conclusion: This study showed that, although being validated, the reproduced model underperformed when using another dataset. The difference in performance depending on the dataset is commonly the cause of overfitting when creating the model. However, the dataset used in the original paper (Sas et al., 2020a) and the Leuven's dataset gave similar performance, which indicates a lesser probability for the overfitting cause. Also, the model is highly sensitive to density parameters and automation of measurement may minimize the uncertainty on failure load. An uncertainty propagation analysis would give the actual precision of such model and improve our understanding of its behavior and is part of future work., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Marc GARDEGARONT reports financial support was provided by LabEx PRIMES. Marc GARDEGARONT reports financial support was provided by MSD Avenir. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Feral cats (Felis catus) pose a significant threat to wildlife, agriculture, and human health through predation, disease transmission, and competition with native animals. Controlling feral cats and their impacts, however, is challenging. New and emerging 1080-based feral cat baits have shown promising results in western and central Australia; however, the safety of these new baits for nontarget species in eastern Australia, where many native animals are more sensitive to compound 1080 (sodium fluoroacetate) than their western conspecifics, has not been assessed. We investigated the uptake of 499 toxic Eradicat ® baits by nontarget animals across five different eastern Australian environs and the uptake of nontoxic Eradicat and Hisstory ® baits at an additional two sites. Using field-based observations of species eating or removing baits, we determined that 13 nontarget species (eight mammals, four birds, and one reptile) were at high risk of individual mortality, with individuals of 11 of those 13 species (seven mammals, four birds) observed consuming enough toxic Eradicat in a single visit to ingest a lethal dose of 1080. Feral cats (the target species) consumed only 3.1% of monitored baits, which was only 52% of the 31 baits they encountered. We recommend undertaking targeted population monitoring of species identified at high risk of individual mortality, to determine whether Eradicat baits present a population-level risk to these species. Our findings suggest that the small-sized Eradicat baits present a greater risk to nontarget species in eastern Australia than the larger traditional 1080-based meat baits used for the control of wild dogs and foxes. Our study highlights the importance of performing risk assessments for different bait types, even when the same toxin is used, and of performing site-specific nontarget risk assessments of new baits such as Eradicat to assist developing guidelines for their safe and effective use in different environs. Integr Environ Assess Manag 2022;18:224-244. © 2021 State of Queensland. Integrated Environmental Assessment and Management © 2021 SETAC., (© 2021 State of Queensland. Integrated Environmental Assessment and Management © 2021 SETAC.)