Search

Free-standing hybridized electrode consisting of double-walled carbon nanotubes (DWNTs) and activated carbon have been fabricated for flexible supercapacitor applications. The xanthan-gum, used in our methodology, showed high ability in dispersing the strongly bundled DWNTs, and was then effectively converted to activated carbon with large surface area via chemical activation. The homogeneously dispersed DWNTs within xanthan-gum derived activated carbon acted as both electrical path and mechanical support of electrode material. The hybridized film from highly dispersed DWNTs and activated carbon was mechanically strong, has high electrical conductivity, and exhibited high specific capacitance of 141.5 F/g at the current density of 100 mV/s. Our hybridized film is highly promising as electrode material for flexible supercapacitors in wearable device.

It is critical to understand the laws of quantum mechanics in transformative technologies for computation and quantum information science applications to enable the ongoing second quantum revolution calls. Recently, spin qubits based on point defects have gained great attention, since these qubits can be initiated, selectively controlled, and read out with high precision at ambient temperature. The major challenge in these systems is controllably generating multiqubit systems while properly coupling the defects. To address this issue, we began by tackling the engineering challenges these systems present and understanding the fundamentals of defects. In this regard, we controllably generate defects in MoS2and WS2monolayers and tune their physicochemical properties via proton irradiation. We quantitatively discovered that the proton energy could modulate the defects’ density and nature; higher defect densities were seen with lower proton irradiation energies. Three distinct defect types were observed: vacancies, antisites, and adatoms. In particular, the creation and manipulation of antisite defects provides an alternative way to create and pattern spin qubits based on point defects. Our results demonstrate that altering the particle irradiation energy can regulate the formation of defects, which can be utilized to modify the properties of 2D materials and create reliable electronic devices.

Perfluorinated alkyl substances (PFAS), such as perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), are pervasive organic contaminants that are widespread in aquatic environments, posing significant health risks to humans and wildlife. Due to their persistent nature, urgent removal is necessary. Conventional adsorbents are inefficient at removing PFOS and PFOA, highlighting the need for alternative materials. Herein, we present a synthetic method for quaternary ammonium cation-doped carbon nanoparticles (QACNs) using a solution plasma process for the efficient removal of PFOS and PFOA. QACN is formed simultaneously through a one-step discharge of nonequilibrium plasma at the interface of benzene and pyridinium chloride. The resulting material exhibited a high surface electrical charge and enhanced hydrophilicity as well as an amorphous structure of a nonporous nature, involving nanoparticles with an undefined shape. The obtained adsorbent demonstrated high adsorption efficiency and stability, adsorbing 998.45 and 889.37 mg g–1of PFOS and PFOA, respectively, exceeding the efficiencies of conventional carbon-based adsorbents (80.89–313.15 mg g–1). The adsorption performance was dependent on the adsorbent dosage, pH of the solution, and the coexisting ionic species. Adsorption studies, including adsorption kinetics, isotherms, and thermodynamics, revealed that PFOS and PFOA were chemisorbed to the QACN surface, forming multilayers endothermically and spontaneously. Experimental and computational analyses revealed that adsorption primarily occurs via electronic interactions between the PFAS active sites and the quaternary ammonium group in the carbon framework. The slightly lower adsorption potential of the PFOS and PFOA fluorocarbon chains on the adsorbent was elucidated. Furthermore, the dispersibility of the adsorbent in solution significantly affected the adsorption performance. These findings highlight the potential of the novel synthetic method proposed in this study, offering a pathway for the development of highly effective carbon adsorbents for environmental remediation.

Nanostructures of layered transition metal dichalcogenide (TMD) alloys with tunable compositions are promising candidates for a broad scope of applications in electronics, optoelectronics, topological devices, and catalysis. Most TMD alloy nanostructures are synthesized as films on substrates using gas-phase methods at high temperatures. However, lower temperature solution routes present an attractive alternative with the potential for larger-scale, higher-yield syntheses of freestanding, higher surface area materials. Here, we report the direct solution synthesis of colloidal few-layer TMD alloys, MoxW1–xSe2and WS2ySe2(1–y), exhibiting fully tunable metal and chalcogen compositions that span the MoSe2–WSe2and WS2–WSe2solid solutions, respectively. Chemical guidelines for achieving the targeted compounds are presented, along with comprehensive structural characterizations (X-ray diffraction, electron microscopy, Raman, and UV–visible spectroscopies). High-resolution microscopic imaging confirms the formation of TMD alloys and identifies a random distribution of the alloyed elements. Analysis of the tilt-angle dependency of the intensities associated with atomic-resolution annular dark field imaging line scans reveals the types of point vacancies present in the samples, thus providing atomic-level insights into the structures of colloidal TMD alloy nanostructures that were previously only accessible for substrate-confined films. The A excitonic transition of the TMD alloy nanostructures can be readily adjusted between 1.51 and 1.93 eV through metal and chalcogen alloying, correlating the compositional modulation to the realization of tunable optical properties.