Search

This paper evaluates the modification of fiber morphology and the strength property development of paper from Enset fiber as a function of soda pulping conditions and refining energy. Soda pulping was conducted at pulping temperatures between 160 and 180 °C. The NaOH charge was 16, 20, and 24% based on the initial raw material. The beating of pulp was conducted using a Jokro mill. The refining of pulp was conducted in a laboratory refiner at different refining intensities. The mild Jokro mill beating was not effective on Enset fiber pulp. On the other hand, the laboratory refiner effectively refined the pulp. The fiber morphology was altered in the way of improving the paper formation and strength. The beating degree of the pulp was increased to about 49 °SR. The tensile index was enhanced to around 80 Nm/g using a refining energy input of 250 kwh/t. From the results, it can be concluded that Enset fiber pulp is suitable for packaging papers due to its high strength level. On the other hand, Enset fiber can be a potential raw material for specialty papers like filter paper and tea bags because of its high porosity.

European paper mills are currently facing the question of whether recovered paper, their main raw material, will be available in sufficient quantities and an acceptable quality in the future. An alternative to recovered paper or wood fiber is the use of agricultural residues such as wheat straw. Sodium carbonate-based straw pulping processes have the advantage of not requiring recausticizing for chemical recovery, which reduces investment and operating costs. With the addition of oxygen, delignification can be significantly improved to provide pulps suitable for bleaching. This study compares the pulping of wheat straw using sodium carbonate, sodium carbonate + oxygen, and sodium carbonate + sodium hydroxide + oxygen. Pulping parameters such as temperature, retention time, and chemical charge were varied, and their influence on pulp properties was studied. The use of sodium carbonate alone produced pulps with high yields of up to 72% and comparably high burst and compressive strength. The addition of oxygen and small amounts of sodium hydroxide produced pulps with a high initial brightness of 42 %ISO and a low kappa number (18), still at high pulp yields of 62%. These pulps were two-stage bleached to achieve brightness levels of up to 73 %ISO.

Biosynthetic enzymes have enormous potential for the chemoenzymatic synthesis of natural products and other bioactive compounds. Methyltransferases are promising tools for the selective enzymatic modification of complex structures. This paper describes the production, purification and biochemical characterization of the O‐methyltransferase JerF, which catalyzes unique 4‐methoxy‐5,6‐dihydropyranone formation in jerangolid A biosynthesis. Isolation problems had hitherto prevented detailed studies on JerF and were solved by the fusion to maltose‐binding protein. The differentiation of JerF between styryl‐substituted dihydropyrandion enantiomers was investigated. In combination with a spontaneous racemization occurring with this type of substrates, a new enzymatic dynamic kinetic resolution was observed, which was used for the enantioselective chemoenzymatic synthesis of kavalactone natural products and new derivatives. In combination with an HMT‐based SAM regeneration system, (+)‐kavain, (+)‐11,12‐dimethoxykavain and (+)‐12‐fluorokavain were prepared in 3–4 steps on a 100 μmol scale with overall yields of 37–57 % and ees of 70–86 %. A mutational study based on an AlphaFold 2 model provided indications for active site residues with an influence on the performance of the enzyme that could be targeted for engineering in the future. This example illustrates how the exceptional enzymatic activities and specificities of biosynthetic enzymes can be exploited for the development of new synthesis approaches. [ABSTRACT FROM AUTHOR]