Search

Considering the current geopolitical situation that has hindered the gas supply gas from Russia, Europe’s main supplier, it is necessary to find alternative routes to guarantee the Italian gas stocks in winter at a reasonable cost. Such energetic strategies should consider the environmental sustainability of the different available options, fitting the targets of the EU environmental policy. With the aim of supplying a quantitative tool to support the European green transition, this paper reports the entire life cycle assessment (LCA) of three different options for the production and supply of natural gas/methane in Italy: the production of biomethane from biogas (considering a real-scale plant in Italy), the use of liquefied natural gas (LNG) supplied by Qatar by vessel, and the use of compressed gas delivered from Algeria via pipeline. The application of the LCA standardized method allowed for the quantification of the environmental benefit provided by the first option, against all the considered impact categories, thanks to a combination of several advantages: (a) its low-impact anaerobic production, (b) its exploitation of a waste product from the food/agriculture industries, and (c) its production of valuable by-products, which can be considered environmental credits. The results proved the possible environmental gain resulting from an integrated energy supply system that would be able to enhance the economic fabric of specific areas.

An innovative cryo-mechano-hydrometallurgical process (named LIBAT) was demonstrated at pilot scale for the treatment of EOL lithium primary batteries with chemistry Li(0)-MnO2. The process allowed the recycling of steel scraps from external cases after cryomechanical dismantling, and the recovery of Mn and Li products after hydrometallurgical processing. During demonstration activities, about nine tons of batteries were treated in the cryomechanical section, and one ton of black mass was treated in the hydrometallurgical section for the recovery of Mn hydroxides and Li2CO3. The environmental impacts of the process were evaluated in comparison with an innovative pyrometallurgical approach allowing Li recovery, confirming the benefits of the proposed process due to a reduction in energy consumption. Process simulations were performed considering different mixture feeds (only Li primary, or mixture with Li-ion batteries) and process options (only the cryomechanical section of the integral process) to assess the lower limits of potentiality that would ensure economic sustainability.

The contamination of coastal marine sediments with heavy metals (HMs) is a widespread phenomenon that requires effective remediation actions. Bioremediation based on the use of bacteria is an economically and environmentally sustainable effective strategy for reducing HM contamination and/or toxicity in marine sediments. However, information on the efficiency of marine-derived fungi for HM decontamination of marine sediments is still largely lacking, despite evidence of the performance of terrestrial fungal strains on other contaminated matrixes (e.g., soils, freshwater sediments, industrial wastes). Here, we carried out for the first time an array of parallel laboratory experiments by using different combinations of chemical and microbial amendments (including acidophilic autotrophic and heterotrophic bacteria, as well as filamentous marine fungi) for the bioremediation of highly HM-contaminated sediments of the Portman Bay (NW Mediterranean Sea), an area largely affected by long-term historical discharges of mine tailings. Our results indicate that the bioleaching performance of metals from the sediment is based on the addition of fungi (Aspergillus niger and Trichoderma sp.), either alone or in combination with autotrophic bacteria, was higher when compared to other treatments. In particular, fungal addition allowed obtaining bioleaching yields for As eight times higher than those by chemical treatments and double compared with the addition of bacteria alone. Moreover, in our study, the fungal addition was the only treatment allowing effective bioleaching of otherwise not mobile fractions of Zn and Cd, thus overtaking bacterial treatments. We found that the lower the sediment pH reached by the experimental conditions, as in the case of fungal addition, the higher the solubilization yield of metals, suggesting that the specific metabolic features of A. niger and Trichoderma sp. enable lowering sediment pH and enhance HM bioleaching. Overall, our findings indicate that fungi can be more effective than acidophilic autotrophic and heterotrophic bacteria in HM bioleaching, and as such, their use can represent a promising and efficient strategy for the bioremediation of marine sediments highly contaminated with heavy metals.