Search

Lateral flow immunoassays (LFIAs) are widely used to determine carbendazim (CBZ) residues in food products due to their advantages of low cost, ease and rapid use, on-site detection capability. However, conventional LFIAs have low detection sensitivity. Although improvements have been made to increase the sensitivity, it is not sufficient. Here, a hamper pad, polyvinyl alcohol coated on a nitrocellulose membrane, was integrated to enhance the sensitivity of LFIA for CBZ detection. The hamper pad was inserted between the conjugated and nitrocellulose pads to delay the flow rate, thereby increasing the possibility of the antibody and target analyte binding. This platform exhibited a fourfold sensitivity increase in CBZ detection compared with the conventional LFIA, and its limit of detection was 1.6 ng/mL. In addition, a single-step operation was successfully applied to detect CBZ in rice (white rice, brown rice, sticky rice, and paddy) and soybean samples, with acceptable recoveries of 93.6%-120.0%. This novel device was compared to the standard high-performance liquid chromatography method, which shows high accuracy with a Kappa coefficient of 0.91. Therefore, improved sensitivity with a rapid, simple, and inexpensive device could facilitate the detection of CBZ residues in agricultural products for on-field screening and improved user-friendliness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Chicken anemia virus (CAV) is one of the primary causes of morbidity and mortality in young chickens. Given the importance of timely detection for maintaining livestock quality, there is a pressing need for rapid and field-deployable diagnostic tools. This study introduces a highly sensitive paper-based electrochemical immunosensor (PEI) for the detection of the 60 amino acid N-terminally truncated viral protein 1 (Δ60VP1), a derivative of the CAV capsid (VP1). A custom antibody was produced for precise immunoassay detection, with results obtainable within 30 min using Square Wave Voltammetry (SWV). The underlying mechanism involves an immunocomplex in the sample zone that hinders the electron transfer of redox species, thereby reducing the current signal in proportion to the Δ60VP1 concentration. Under optimal conditions, the detection linearity for Δ60VP1 ranged from 80 to 2500 ng/mL, with a limit of detection (LoD) of 25 ng/mL. This device was then successfully applied to detect VP1 in 29 chicken serum samples, achieving 91.6% sensitivity and 94.1% selectivity. In conclusion, the PEI device presents a promising solution for rapid, sensitive, and disposable detection of chicken pathogens, potentially revolutionizing productivity and quality assurance in chicken farming., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Portable electrochemical analytical devices such as cholesterol sensors are widely used for disease diagnosis. However, these tools are bulky and require bioreceptors for the specific detection of cholesterol. Herein, a novel 3D electrochemical paper-based analytical device (3D-ePAD) combined with a near-field communication (NFC) potentiostat was developed and applied to the nonenzymatic detection of cholesterol. This 3D-ePAD platform was designed so that all working operations are performed on a single device, which is separated into an origami PAD (oPAD) and an inset PAD (iPAD). β-Cyclodextrin (β-CD), which is immobilized on oPAD, is used as a specific material for the nonenzymatic detection of cholesterol. Through this device, cholesterol detection is integrated with a battery-free NFC potentiostat on a smartphone. The concentration of cholesterol was examined through a [Fe(CN) 6 ] 3-/4- current signal as a redox indicator, which was previously stored in the detection part of an iPAD. Under optimal conditions, 3D-ePAD/NFC exhibited a linear detection efficiency of 1-500 μM and a maximum detection limit of 0.3 μM for cholesterol detection. Moreover, the proposed sensor was successfully used to measure cholesterol in real serum samples from humans, and the results were consistent with those of a commercial cholesterol meter. Therefore, the new NFC-operated 3D-ePAD platform can be used as an alternative tool for the nonenzymatic quantification of various biomarkers. In addition, 3D-ePAD/NFC can support the diagnosis of other diseases in the future, as the device is inexpensive, portable, and disposable and functions with low sample volumes., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

COVID-19 vaccines have been provided to the general public to build immunity since the 2019 coronavirus pandemic. Once vaccinated, SARS-CoV-2 neutralizing antibodies (NAbs-COVID-19) are needed for excellent protection against COVID-19. However, monitoring NAbs-COVID-19 is complicated and requires hospital visits. Moreover, the resulting NAbs-COVID-19 are effective against different strains of COVID-19 depending on the type of vaccine received. Here, an overlaid lateral flow immunoassay (O-LFIA) was developed for the simultaneous detection of two NAbs-COVID-19 against different virus strains, Delta and Omicron. The O-LFIA was visualized with two T-lines with a single device using competition between the free antigen and the antigen-binding antibody. Angiotensin-converting enzyme 2 (ACE2) immobilized on the T-line binds to the antigen remaining after antibody binding. Under the optimum conditions, the proposed device exhibited 50% inhibition concentrations (IC 50 values) of 45.1 and 53.6 ng/mL for the Delta and Omicron variants, respectively. Additionally, the proposed platform was applied to real-world samples of animal and human serum, and the developed immunoassay provided results that were in good agreement with those obtained with the standard method. In conclusion, this developed O-LFIA can be used as an alternative method to detect NAbs-COVID-19 and can be enabled for future advancements toward commercialization.

Paper-based electrochemical devices (PEDs) have emerged as versatile platforms that bridge analytical chemistry and materials science, demonstrating advantages of portability, cost-effectiveness, and environmental sustainability. This study investigates the integration of a graphene pseudoreference electrode (GPRE) into a PED, and it exhibits potential advantages over the traditional Ag/AgCl pseudoreference electrode (PRE). In addition, the electrochemical properties and stability of GPRE are compared with those of the traditional Ag/AgCl PRE. The results demonstrate that GPRE exhibits a stable and reproducible potential during electrochemical measurement throughout 180 days, demonstrating its suitability as an alternative to an expensive metal PRE. Furthermore, a GPRE-incorporated paper-based device is designed and evaluated for use in the electrochemical detection of cadmium (Cd) and lead (Pb) using an in situ bismuth-modified electrode. The GPRE-incorporated PED exhibited good analytical performance, with a low limit of detection of 0.69 and 5.77 ng mL -1 and electrochemical sensitivities of 70.16 and 38.34 μA·mL·μg - 1 ·cm -2 for Cd(II) and Pb(II), respectively. More than 99.9% accuracy of the sensor was obtained for both ions with respect to conventional inductively coupled plasma-mass spectrometry. The results highlight the effectiveness and suitability of the GPRE-incorporated PED as a sensor for various applications, such as environmental monitoring, food quality control, and medical diagnostics., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

An electrochemical lateral flow immunoassay (eLFIA) strip with high reproducibility was developed to rapidly and accurately detect Streptococcus suis serotype 2. This proposed strip was fabricated by integrating ratiometric electrochemical detection and LFIA (R-eLFIA). The R-eLFIA exhibited excellent reproducibility, which was improved by 3.8 times compared to a single electrode. A dual-working screen-printed graphene electrode (SPGE) was designed by tuning the working electrode with electroactive species in the biosensing system. Ferrocene carboxylic acid (Fc) was used as a signal probe, and sunset yellow (SY) at one working electrode was used as an internal reference signal to provide a built-in correction for reducing the effects of inherent background current. S. suis serotype 2-specific antibodies were immobilized on a nitrocellulose membrane of LFIA, which is located on the position of Fc-SPGE. In the presence of the analyte, an immunocomplex formed on the region of Fc-SPGE, causing a decrease in Fc current while SY current remained constant. The current ratio's decrease was proportional to S. suis serotype 2's concentration. Under optimization, this biosensor showed good linearity in the range of 10 2 -10 10  CFU/mL with a limit of detection of 10 CFU/mL and achieved a rapid detection time (15 min). Moreover, the R-eLFIA biosensor exhibited excellent reproducibility and high selectivity and was applied in human serum samples. Thus, this study successfully matched the advantages of the ratiometric strategy and LFIA and has great potential to be used as an effective tool for rapidly detecting S. suis serotype 2 in clinical samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Cannabis is a plant that is harmful and beneficial because it contains more than 400 bioactive compounds, and the main compounds are Δ 9 tetrahydrocannabinol (THC) and cannabidiol (CBD). Currently, cannabis extracts are used in medicine, but the amount of THC as a main psychoactive component is strictly regulated. Therefore, the ability to rapidly and accurately detect THC is important. Herein, we developed a sensitive electrochemical method combining a rapid lateral flow assay (LFA) to detect THC rapidly. An electrochemical LFA device was constructed by attaching a screen-printed electrode inside a lateral-flow device to exploit the remarkable binding of THC to the cannabinoid type 2 (CB2) receptor in the test zone. The ferrocene carboxylic acid attached to the monoclonal THC antibody acts as an electroactive species when it binds to the THC in the sample before it flows continuously to the CB2 receptor region on the electrode. Under optimal conditions, the detection time is within 6 min and the devise shows excellent performance with a detection limit of 1.30 ng/mL. Additionally, the device could be applied to detect THC in hemp extract samples. The results obtained from this sensor are similar to the standard method (HPLC) for detecting THC. Therefore, this proposed device is useful as an alternative device for the on-site determination of THC because it is inexpensive, portable, and exhibits high sensitivity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this work, we present the development of an immunosensor for the direct, selective, and sensitive determination of symmetric dimethylarginine (SDMA) in urine, in view of the emerging role of this molecule as a biomarker for renal disease. SDMA is almost completely excreted by the kidneys, hence in renal dysfunction, the excretion is decreased, resulting in accumulation in plasma. Reference values for plasma or serum have already been established in small animal practice. Values < 15 μg/dL are considered normal, 15-19 μg/dL are values of concern, and at values > 20 μg/dL kidney disease is likely. The proposed electrochemical paper-based sensing platform uses anti-SDMA antibodies for targeted detection of SDMA. Quantification is related to a decrease in the signal of a redox indicator due to the formation of an immunocomplex that interferes with electron transfer. Square wave voltammetry measurements showed a linear correlation of the peak decline for 50 nM - 1 μM SDMA with a detection limit of 15 nM. The influence of common physiological interferences caused no significant peak reduction, indicating excellent selectivity. The proposed immunosensor was successfully applied for the quantification of SDMA in human urine of healthy individuals. Surveillance of SDMA concentration in urine could prove to be very valuable in the diagnosis or monitoring of renal disease., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Equipment-free colorimetric-based lateral flow immunoassay (LFIA) is the most convenient and popular tool for various applications, including diagnostic tools requiring high sensitivity for the detection of pathogens. Thus, improvements and developments of LFIA are constantly being reported. Herein, we enriched the sensitivity of LFIA using the gold enhancement principle, emphasizing needlessly complicated apparatus, only one step for the strip test operation, and typical time incubation (15 min) process. Self-enhanced LFIA was then executed for subsequent flows by overlapping the additionally enhanced pad composed of gold ions and reducing agent on the conjugate pad and the sample pad. Self-enhanced LFIA was performed to detect SARS-CoV-2 antigens in saliva. The obtained result depicted that the achieved sensitivity was up to tenfold compared with that of conventional LFIA by visual measurements. The detection limits of self-enhanced LFIA detecting nucleocapsid protein antigens in the saliva sample was 0.50 and 0.10 ng/mL employed by naked eye detection and calibration curve-based calculation, respectively. When the proposed device was applied to 207 human saliva samples, the diagnostic performance presented a 96.10 % sensitivity and 99.23 % specificity. This self-enhanced LFIA could be implemented in large-scale production and demonstrates higher sensitivity with effortless use, which meets the requirements for point-of-care testing and on-field mass screening., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Elsevier B.V. All rights reserved.)

Antigen test kits (ATK) are extensively utilized for screening and diagnosing COVID-19 because they are easy to operate. However, ATKs exhibit poor sensitivity and cannot detect low concentrations of SARS-CoV-2. Herein, we present a new, highly sensitive, and selective device obtained by combining the principle of ATKs with electrochemical detection for COVID-19 diagnosis, which can be quantitatively assessed using a smartphone. An electrochemical test strip (E-test strip) was constructed by attaching a screen-printed electrode inside a lateral-flow device to exploit the remarkable binding affinity of SARS-CoV-2 antigen to ACE2. The ferrocene carboxylic acid attached to SARS-CoV-2 antibody acts as an electroactive species when it binds to SARS-CoV-2 antigen in the sample before it flows continuously to the ACE2-immobilization region on the electrode. Electrochemical-assay signal intensity on smartphones increased proportionally to the concentration of SARS-CoV-2 antigen (LOD = 2.98 pg/mL, under 12 min). Additionally, the application of the single-step E-test strip for COVID-19 screening was demonstrated using nasopharyngeal samples, and the results were consistent with those obtained using the gold standard (RT-PCR). Therefore, the sensor demonstrated excellent performance in assessing and screening COVID-19, and it can be used professionally to accurately verify diagnostic data while remaining rapid, simple, and inexpensive., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

A facile colorimetric method based on a typical redox reaction was first developed for the determination of salbutamol (SAL) using a low-cost and portable transparency-based analytical device (TAD). The TAD was simply fabricated by wax-printing onto a transparent polymer-based substrate to create the hydrophobic barriers and the colorimetric reaction zones where the color changes could be easily observed with the naked eye. Potassium permanganate (KMnO 4 ), a common oxidizing agent, was deliberately used as a colorimetric reagent for SAL. Once SAL reacted with KMnO 4 in the acidified system, it could undergo oxidation and the color of KMnO 4 subsequently changed from light pink to orange. The color change corresponding to the SAL concentration could be clearly observed at the TAD sensor. In addition, the reaction color could be recorded using a digital camera and then analyzed by ImageJ for quantitative analysis. Under the optimized conditions, the developed method together with the TAD sensor exhibited high efficiency for SAL determination with linearity ranging from 0.5 to 40 mg·L -1 and a limit of detection (LOD) of 0.05 mg·L -1 . •This proposed TAD-based colorimetric method using permanganate as color reagent showed excellent performance in SAL detection with good accuracy and high precision., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Author(s).)

Leptospirosis is one of the most life-threatening tropical diseases caused by pathogenic Leptospira . To date, a diagnostic device that offers rapid and sensitive detection of leptospires has been still in demand for proper treatment to reduce the mortality rate. Herein, we create a resistance-based lateral flow immunosensor diagnosis device (R-LFI) that integrates near-field communication (NFC) with a portable smartphone for leptospiral detection in clinical samples. A specific monoclonal antibody against the pathogen was coated on a nitrocellulose membrane (NCM) where the test line was collocated. Two electrodes with a sandwich-like configuration were installed employing a conductive double-sided adhesive tape and connected with a NFC smartphone-based detection system. A half-sandwich immunocomplex formation induced high proton conduction, resulting in a considerable decrement in resistive response. The performance of the R-LFI sensor was evaluated using recombinant LipL32 (rLipL32), Leptospira interrogans , and clinical samples. The R-LFI device exhibited linear responses toward rLipL32 protein in phosphate buffer and L. interrogans -spiked healthy human serum samples within the concentration ranging from 1 to 1000 ng mL -1 (limit of detection (LOD): 0.29 ng mL -1 ) and from 10 4 to 10 6 cell mL -1 (LOD: 4.89 × 10 3 cell mL -1 ), respectively. Our R-LFI sensor successfully detected L. interrogans -positive clinical samples as confirmed by polymerase chain reaction (PCR). This platform offers high specificity, selectivity, simplicity, miniscule sample volume, and no labeling element requirement. These desirable features make it particularly suitable for countries where medical facilities and resources are limited.

A new detection strategy was developed to improve the sensitivity of a lateral flow immunoassay platform utilizing a delayed hydrophobic barrier fabricated with trimethylsilyl cellulose (TMSC). The SARS-CoV-2 spike receptor-binding domain (SARS-CoV-2 SP RBD) antigen was chosen as a model analyte to demonstrate the superior detectability of this scheme. The novel device consists of 2 separate layers, so-called delayed lateral flow immunoassay (d-LFIA). The upper layer is intended for the analyte or sample flow path, where the test solution flows freely straight to the detection zone to bind with the primary antibody. The lower layer, located just underneath, is designed for the SARS-CoV-2 spike receptor-binding domain-conjugated gold nanoparticles (SARS-CoV-2 SP RBD-AuNPs) used for producing a colorimetric signal. This layer is fabricated with a TMSC barrier to time-delay the movement of SARS-CoV-2 SP RBD-AuNPs, thus allowing the antigen to bind with the primary antibody more efficiently. This platform exhibited a 2.6-fold enhancement in the sensitivity and 9.1-fold improvement in the limit of detection (LOD) as compared with the conventional LFIA. In addition, this d-LFIA device was satisfactorily applied to accurate screening of COVID-19 patients., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

This study demonstrates a hand-operated, paper-based rotational vertical-flow immunosensor (rotational VFI) platform requiring fewer pipetting steps, designed for the electrochemical detection of α-fetoprotein with multiple and time-sequenced steps. The platform allows users to perform electrochemical measurements without interference from the convective component of fluid motion, which is unfavorable in most techniques. Users can freely transfer-switch-stop fluid flows by manually rotating the paper disk, evidencing the superior flexibility of this sensor compared to other biosensors. Furthermore, the overall assay duration can be considerably shortened to 9 min. The linear range (LR) is determined to be 0.01-500 ng/mL, with a limit of detection (LOD) of 1.65 pg/mL, and the sensitivity can be significantly enhanced simply by switching off the sample stream to ensure detention at the binding zone (for up to 30 min). This additional step can widen the LR to 0.5 pg/mL, with a LOD of 3.54 fg/mL, which is the lowest detectable level ever reported among paper-based sensors. The advantages of the designed rotational VFI qualify it as a suitable alternative to various biosensors.

The electrochemical determination of five heavy metals is demonstrated using a wireless and card-sized potentiostat coupled with a smartphone through near-field communication (NFC) technology. A smartphone application was customized to command the NFC potentiostat, collect real-time signals, process the data, and ultimately display the quantities of the selected elements. The screen-printed graphene electrode (SPGE) was simply fabricated and modified using different nanomaterials for each heavy metal. Using differential pulse voltammetry (DPV) mode on the smartphone, the signal peaks were presented at + 10 mV for As(III), + 350 mV for Cr(VI), 0 mV for Hg(II), - 900 mV for Cd(II), and - 680 mV vs. Ag/AgCl for Pb(II). The linear ranges were 25-500, 250-25,000, 100-1,500, 25-750, 25-750 ng mL -1 with detection limits of 3.0, 40, 16, 2.0, and 0.95 ng mL -1 for As(III), Cr(VI), Hg(II), Cd(II), and Pb(II), respectively. The reproducibility in terms of relative standard deviation was less than 8.8% (n = 5 devices) of the developed SPGE coupled with the NFC potentiostat. Various samples for different applications (e.g., food safety and environmental monitoring) were analyzed and quantified using the proposed sensors. The results from this sensor indicate that there is no significant difference (95% confidence level) compared with those obtained from the traditional ICP-OES method, while the recoveries were found in the acceptable range of 80-111%. Hence, it can be deduced that this recent advanced technology of the NFC potentiostat developed for heavy metal analysis offers a highly sensitive and selective detection, yet the sensor remains compact, low-cost, and readily accessible to end-users., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

LipL32 is an outer membrane protein present only on pathogenic Leptospira species, which is the causative agent of leptospirosis. Leptospirosis symptoms are often misdiagnosed with other febrile illnesses as the clinical manifestations are non-specific. Therefore, an accurate diagnostic tool for leptospirosis is indeed critical for proper and prompt treatment. Typical diagnosis via serological assays is generally performed to assess the antibodies produced against Leptospira . However, their delayed antibody response and complicated procedure undoubtedly limit the practical utilization especially in a primary care setting. Here, we demonstrate for the first time an early-stage detection of LipL32 by an integrated lateral-flow immunoassay with an electrochemical readout (eLFIA). A ferrocene trace tag was monitored via differential pulse voltammetry operated on a smartphone-based device, thus allowing for on-field testing. A superior performance in terms of the lowest detectable limit of detection of 8.53 pg/mL and broad linear dynamic range (5 orders of magnitude) among other sensors available thus far was established. Additionally, the developed test strip provided a straightforward yet sensitive approach for diagnosis of leptospirosis using the collected human sera from patients, in which the results were comparable to the real-time polymerase chain reaction technique.