Search

Laser-based plasma accelerators (LPA) have successfully demonstrated their capability to generate high-energy electron beams with intrinsically short bunch lengths and high peak currents at a setup with a small footprint. These properties make them attractive drivers for a broad range of different applications including injectors for rf-driven, ring-based light sources. In close collaboration the Deutsches Elektronen-Synchrotron (DESY), the Karlsruhe Institute of Technology (KIT) and the Helmholtz Institute Jena aim to develop a 50 MeV plasma injector and demonstrate the injection into a compact storage ring. This storage ring will be built within the project cSTART at KIT. As part of the ATHENA (Accelerator Technology HElmholtz iNfrAstructure) project, DESY will design, setup and operate a 50 MeV plasma injector prototype for this endeavor. This contribution gives a status update of the 50 MeV LPA-based injector and presents a first layout of the prototype design at DESY in Hamburg., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

The Karlsruhe Research Accelerator (KARA) at KIT features an electro-optical (EO) near-field diagnostics setup to conduct turn-by-turn longitudinal bunch profile measurements in the storage ring using electro-optical spectral decoding (EOSD). Within the Future Circular Collider Innovation Study (FCCIS) an EO monitor using the same technique is being conceived to measure the longitudinal profile and center-of-charge of the bunches in the future electron-positron collider FCC-ee. This contribution provides an overview of the EO near-field diagnostics at KARA and discusses the development and its challenges towards an effective beam diagnostics concept for the FCC-ee., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

The detection of rapid dynamics in diverse physical systems is traditionally very difficult and strongly dominated by several noise contributions. Laser mode-locking, electron bunches in accelerators and optical-triggered phases in materials are events that carry important information about the system from which they emerge. To under- stand the underlying dynamics of complex systems often large numbers of single-shot measurements must be acquired continuously over a long time with extremely high temporal resolution. Ultrafast real-time instruments allow the acquisition of large data sets, even for rare events, in a relatively short time period. The real-time measurement of fast single-shot events with large record lengths is one of the most challenging problems in the fields of instrumentation and measurement. In this contribution, the novel ultra-fast and continuous data sampling system THERESA using photonic time-stretch is presented and its performance is discussed. The pro- posed data acquisition system is based on the latest ZYNQ Radio Frequency System on Chip (ZYNQ-RFSoC) family from Xilinx, which combines an array of fast (GS/s) multi-channel Analog-to-Digital Converters (ADCs) with a Field Programmable Gate Array (FPGA) and a multi-core ARM processor in a single heterogeneous programmable device. The stretched pulse is sampled in parallel by 16 wideband sampling channels operating in time-interleaving mode. The sampled data is transferred by a 100 Gb Ethernet data link to the Data Acquisition (DAQ) compute node for further analysis. The combination of both, the photonic time-stretch and the fast sampling system, is capable of sampling short pulses with femtosecond time resolution. Applications of the new system, hardware implementation and the commissioning of the first system for the electron bunch diagnostics are presented.

In the framework of the compact STorage ring for Accelerator Research and Technology (cSTART) project, which will be realized at Karlsruhe Institute of Technology (KIT), a Very Large Acceptance compact Storage Ring (VLA-cSR) is planned to study the injection and the storage of 50 MeV, ultra-short (sub-ps) electron bunches from a laser plasma accelerator (LPA) and the linac-based test facility FLUTE. For such a storage ring, where a single bunch with a relatively wide range of bunch charge (1 pC - 1000 pC ) and energy spread (10’4 - 10’2) will circulate at a relatively high revolution frequency (7 MHz), the choice of beam diagnostics is very delicate. In this paper, we would like to discuss several beam diagnostics options for the storage ring and to briefly report on several tests that have been or are planned to be realized in our existing facilities., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

For measuring the temporal profile of the coherent synchrotron radiation (CSR) a setup based on electro-optical spectral decoding (EOSD) will be installed as part of the sensor network at the KIT storage ring KARA (Karlsruhe Research Accelerator). The EOSD technique allows a single-shot, phase sensitive measurement of the complete spectrum of the CSR far field radiation at each turn. Therefore, the dynamics of the bunch evolution, e.g. the microbunching, can be observed in detail. Especially, in synchronized combination with the already established near-field EOSD, this method could provide deeper insights in the interplay of bunch profile and CSR generation for each individual electron bunch. For a successful implementation of the EOSD single shot setup, measurements with electro-optical sampling (EOS) are performed. With EOS the THz pulse shape is scanned over several turns by shifting the delay of laser and THz pulse. In this contribution different steps towards the installation of the EOSD far field setup are summarized., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

[Ebook] IBIC 2022, International Beam Instrumentation Conference : 11-15 September 2022, Krakow, Poland : IBIC2022 - proceedings / Organizers: GSI [Helmholtzzentrum für Schwerionenforschung]; SOLARIS, National Synchrotron Radiation Centre, Jagiellonian University in Krakow , [Geneva, Switzerland] : JACoW Publishing, [2022], 11th International Beam Instrumentation Conference, IBIC2022, Krakow, Poland, 11 Sep 2022 - 15 Sep 2022; [Geneva, Switzerland] : JACoW Publishing, Geneva, Switzerland 447-450 (2022). doi:10.18429/JACoW-IBIC2022-WEP24, X-ray Free-Electron Laser (XFEL) facilities, such as the 3.4-km European XFEL, use all-optical links with electro-optic bunch arrival-time monitors (BAM) for a long-range synchronization. The current BAM systems achieve a resolution of 3.5 fs for 250 pC bunches. Precise bunch arrival timing is essential for experiments, which study ultra-fast dynamical phenomena with highest temporal resolution. These experiments will crucially rely on femtosecond pulses from bunch charges well below 20 pC. The state-of-the-art BAMs are not allowing accurate timing for operation with such low bunch charges. Here we report on the progress in development of an advanced BAM (system) based on rod-shaped pickups mounted on a printed circuit board and ultra-wideband travelling-wave electro-optic modulators with low operating voltages. We perform modeling and experimental evaluation for the fabricated pickups and electro-optic modulators and analytically estimate timing jitter for the advanced BAM system. We discuss an experimental setup to demonstrate joint operation of new pickups and wideband EO modulators for low bunch charges less than 5 pC., Published by JACoW Publishing, Geneva, Switzerland, [Geneva, Switzerland]

Numerical beam dynamics simulations are essential tools in the study and design of particle accelerators, but they can be prohibitively slow for online prediction during operation or for systematic evaluations of new parameter settings. Machine learning-based surrogate models of the accelerator provide much faster predictions of the beam properties and can serve as a virtual diagnostic or to augment data for reinforcement learning training. In this paper, we present the first results on training a surrogate model for the low-energy section at the Ferninfrarot Linac- und Test-Experiment (FLUTE)., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

The linac-based test facility FLUTE (Ferninfrarot Linac Und Test Experiment) at KIT will be used to study novel accelerator technology and provide intense THz pulses. In this paper, we present start-to-end simulation studies of FLUTE with different bunch charges. We employ a parallel Bayesian optimization algorithm for different bunch charges of FLUTE to find optimized accelerator settings for the generation of intense THz radiation., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

To understand the underlying complex beam diagnostic often large numbers of single-shot measurements must be acquired continuously over a long time with extremely high temporal resolution. Photonic time-stretch is a measurement method that is able to overcome speed limitations of con- ventional digitizers and enable continuous ultra-fast single- shot terahertz spectroscopy with refresh rates of trillions of consecutive frames. In this contribution, a novel ultra- fast data sampling system based on photonic time-stretch is presented and the performance is discussed. THERESA (TeraHErtz REadout SAmpling) is a data acquisition system based on the recent ZYNQ-RFSoC family. THERESA has been developed with an analog bandwidth up to 20 GHz and a sampling rate up to 90 GS/s. When combined with the photonic time-stretch setup, the system will be able to sample a THz signal with an unprecedented frame rate of 8 TS/s. Continuous acquisition for long observation times will open up new possibilities in the detection of rare events in accelerator physics., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

Modern particle accelerator facilities allow new and exciting beam properties and operation modes. Traditional real-time control systems, albeit powerful, have bandwidth and latency constraints that limit the range of operating conditions currently made available to users. The capability of Reinforcement Learning to perform self-learning control policies by interacting with the accelerator is intriguing. The extreme dynamic conditions require fast real-time feedback throughout the whole control loop from the diagnostic, with novel and intelligent detector systems, all the way to the interaction with the accelerator components. In this contribution, the novel KINGFISHER framework based on the modern Xilinx Versal devices will be presented. Versal combines several computational engines, specifically combining powerful FPGA logic with programmable AI Engines in a single device. Furthermore, this system can be natively integrated with the fastest beam diagnostic tools already available, i.e. KAPTURE and KALYPSO., Proceedings of the 11th International Beam Instrumentation Conference, IBIC2022, Kraków, Poland

The compact and versatile linear accelerator-based test facility FLUTE (Ferninfrarot Linac- Und Test-Experiment) is operated at KIT. Its primary goal is to serve as a platform for a variety of accelerator R\ studies like the generation of strong ultra-short terahertz pulses. The amplitude of the generated coherent THz pulses is proportional to the square number of particles in the bunch. With the transverse emittance a measure for the transverse particle density can be determined. It is therefore a vital parameter in the optimization for operation. In a systematic study, the transverse emittance of the electron beam was measured in the FLUTE injector. A detailed analysis considers different influences such as the bunch charge and compares this with particle tracking simulations carried out with ASTRA. In this contribution, the key findings of this analysis are discussed., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

Coherent synchrotron radiation (CSR) is emitted when the emitting structure is equal to or smaller than the observed wavelength. Consequently, these pulses are very short and most detectors respond with their impulse response, regardless of the pulse length and shape. Here we present single-shot measurements performed at the Karlsruhe Research Accelerator (KARA) using a fast real-time oscilloscope and Schottky barrier detectors sensitive in the sub-THz range. The time response of this setup to CSR pulses emitted by electron bunches during the microbunching instability is shown to be sensitive to the shape of the electron bunch. Our results show how, in the future, the shape of electron bunches can be directly measured using a straightforward setup., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

Within the cSTART project (compact storage ring for accelerator research and technology), a Very Large Acceptance compact Storage Ring (VLA-cSR) will be realized at the Institute for Beam Physics and Technology (IBPT) of the Karlsruhe Institute of Technology. (KIT). A modified geometry of a compact storage ring operating at 50 MeV energy range has been studied and main features of the new model are described here. The new design, based on 45° bending magnets, is suitable to store a wide momentum spread beam as well as ultra-short electron bunches in the sub-ps range injected from the plasma cell as well as from the Ferninfrarot Linac- Und Test Experiment (FLUTE). The DBA lattice of the VLA-cSR with different settings and relaxed parameters, split elements and higher order optics of tolerable strength allows to improve the dynamic aperture and momentum acceptance to an acceptable level. This contribution discusses the lattice features in detail, expected lifetime, injection, tolerances and different possible operation schemes of the ring., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

At the KIT electron storage ring KARA (Karlsruhe Research Accellerator) an electro-optical (EO) near-field monitor is in operation performing single-shot, turn-by-turn measurements of the longitudinal bunch profile using electro-optical spectral decoding (EOSD). In context of the Future Circular Collider Innovation Study (FCCIS), a similar setup is investigated with the aim to monitor the longitudinal bunch profile of each bunch for dedicated top-up injection at the future electron-positron collider FCC-ee. This contribution presents the status of a monitor design adapted to cope with the high-current and high-energy lepton beams foreseen at FCC-ee., Proceedings of the 11th International Beam Instrumentation Conference, IBIC2022, Kraków, Poland

In the booster synchrotron of the Karlsruhe Research Accelerator (KARA), the beam is injected from the microtron at 53 MeV and ramped up to 500 MeV. Though the injected beam current from the microtron to the booster seems good, the injection efficiency into the booster is currently low due to various effects. Consequently, an upgrade of the whole beam diagnostics system is taking place in the booster, in order to improve the injection efficiency through understanding the loss mechanisms and the behavior of bunches. Among these diagnostics tools are beam loss monitors, a transverse profile monitor and a longitudinal profile monitor. In this paper, we will describe the setups used for bunch profile measurements in both transverse and longitudinal planes and report on first data analysis results., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand