Search

Air bubbles in the upper ocean are generated mainly by waves breaking at the air–sea interface. As such, after the waves break, entrained air bubbles evolve in the form of plumes in the turbulent flow, exchange gas with the surrounding water, and may eventually rise to the surface. To shed light on the short-term response of entrained bubbles in different stormy conditions and to assess the link between bubble plume penetration depth, mechanical and thermal forcings, and the air–sea transfer velocity of CO2, a field experiment was conducted from an oceanographic research tower in the north Adriatic Sea. Air bubble plumes were observed using high-resolution echosounder data from an upward-looking 1000 kHz sonar. The backscatter signal strength was sampled at a high resolution, 0.5 s in time and 2.5 cm along the vertical direction. Time series profiles of the bubble plume depth were established using a variable threshold procedure applied to the backscatter strength. The data show the occurrence of bubbles organized into vertical plume-like structures, drawn downwards by wave-generated turbulence and other near-surface circulations, and reaching the seabed at 17 m depth under strong forcing. We verify that bubble plumes adapt rapidly to wind and wave conditions and have depths that scale approximately linearly with wind speed. Scaling with the wind–wave Reynolds number is also proposed to account for the sea-state severity in the plume depth prediction. Results show a correlation between measured bubble depths and theoretical air–sea CO2 transfer velocity parametrized with wind-only and wind/wave formulations. Further, our measurements corroborate previous results suggesting that the sinking of newly formed cold-water masses helps bring bubbles to greater depths than those reached in stable conditions for the water column. The temperature difference between air and sea seems sufficient for describing this intensification at the leading order of magnitude. The results presented in this study are relevant for air–sea interaction studies and pave the way for progress in CO2 gas exchange formulations.

The Mediterranean Sea is a primary source of food, ecosystem services and economic activities and one of the most active cyclogenetic regions in the world, where the influence of orographic and morphological features of the relatively small basin plays an important role. Together with the explosive cyclogenesis, tropical-like cyclones (also called Mediterranean Hurricanes or Medicanes) are among the strongest types of storms that can be found in the Mediterranean basin, occurring predominantly in the Ionian, Balearic and Tyrrhenian sub-basins. Similarly to tropical cyclones (Hurricanes or Typhoons), these cyclonic structures are characterized by strong rotating and translating wind fields, which often lead to a combination of remotely generated swell waves and locally generated wind waves, often referred to as crossing sea states. Despite the well-known potential of Medicanes to cause significant damage near islands and coastal zones, which is predicted to intensify as a result of climate change, to date the characterization of maximum individual waves generated during these events is still lacking. In this study, we carry out the first analysis of the large-scale geographical distribution of wave maxima within the wave fields generated during three recent Medicane events using the WAVEWATCH III® spectral wave model forced by ERA5 reanalysis winds, also investigating the influence of crossing sea states on the maximum wave amplitudes with novel statistical formulations developed for such conditions. Our results show that, as in the case of tropical cyclones, several regions of the cyclone field are characterized by crossing sea states, whose role in the formation of the maximum individual waves occurring near the eye of the storm was found to be confined. Furthermore, extreme wave predictions accounting for the local crossing conditions yield differences up to 5% compared to standard statistical distributions.

Unprecedented 3D imaging of waves and sea ice floes from a moving icebreaker in the Antarctic marginal ice zone during a polar cyclone reveals a complex wind-plus-swell sea state, where contrasting ice-driven attenuation and wind forcing coexist.

The study of extreme ocean waves has gained considerable interest in recent years, due to their importance for offshore design and navigation safety, and several theoretical approaches have been developed for their statistical description. However, in the case of crossing seas, where two or more wave systems of different characteristics are present, a full understanding of the main physical mechanisms responsible for the occurrence of very high individual waves is still lacking. As a consequence, the prediction of extremes in such conditions currently relies on integrated parameters of the total sea state, such as the spectral wave steepness. In this study, to gain further insight into the role of the crossing wind sea and swell wave systems in producing extreme individual waves, we investigate realistic sea states during typhoon Kong-rey (2018) using an ensemble of numerical simulations obtained from a phase-resolving wave model based on the High-Order Spectral (HOS) method. The reliability of the numerical fields is assessed for the first time with stereo wave measurements of the sea surface elevation field collected from an offshore platform in the area of interest. We show that, in specific conditions, space-time extreme crest heights in crossing seas can be larger than in unimodal seas due to second-order bound wave interactions between the wind sea and the swell. To improve existing prediction capabilities, we propose a novel formulation for the wave steepness in crossing seas, which includes nonlinear effects up to the second order and accounts for the spectral parameters of the interacting wave systems.

Accurate wind-wave forecasting in enclosed and semi-enclosed basins is a challenging task, demanding primarily for high-resolution wind forcing at regional scale. This is generally obtained with dynamical downscaling from a low-to-mid resolution atmospheric model. In this context, a new wave forecasting system for the marginal Adriatic Sea is herein presented aimed at proposing an alternative strategy for accurate wind-wave forecasting in (semi-) enclosed basins that does not require an ad-hoc regional atmospheric model. The system is based on the state-of-the-art WAVEWATCH III® spectral wave model forced by the global IFS-ECMWF forecast. At first, wind speed is quantile-corrected to account for the systematic underestimation over the Adriatic Sea. Then, the significant wave height in the target region and for regimes associated with marine storms is calibrated following standard procedure. Wind and wave observations from different sources are used for calibration and validation of the wave forecasts, which achieve satisfactory scores. We also compare results with those of other forecasting systems in the area, highlighting the importance of the wind forcing accuracy and the wave model calibration. Doing so, we discuss the challenges that characterise (semi-) enclosed environments in order to propose effective solutions for them and future developments.

Air bubbles in the upper ocean are generated mainly by waves breaking at the air–sea interface. As such, after the waves break, entrained air bubbles evolve in the form of plumes in the turbulent flow, exchange gas with the surrounding water, and may eventually rise to the surface. To shed light on the short-term response of entrained bubbles in different stormy conditions and to assess the link between bubble plume penetration depth, mechanical and thermal forcings, and the air–sea transfer velocity of CO2 , a field experiment was conducted from an oceanographic research tower in the north Adriatic Sea. Air bubble plumes were observed using high-resolution echosounder data from an upward-looking 1000 kHz sonar. The backscatter signal strength was sampled at a high resolution, 0.5 s in time and 2.5 cm along the vertical direction. Time series profiles of the bubble plume depth were established using a variable threshold procedure applied to the backscatter strength. The data show the occurrence of bubbles organized into vertical plume-like structures, drawn downwards by wave-generated turbulence and other near-surface circulations, and reaching the seabed at 17 m depth under strong forcing. We verify that bubble plumes adapt rapidly to wind and wave conditions and have depths that scale approximately linearly with wind speed. Scaling with the wind–wave Reynolds number is also proposed to account for the sea-state severity in the plume depth prediction. Results show a correlation between measured bubble depths and theoretical air–sea CO2 transfer velocity parametrized with wind-only and wind/wave formulations. Further, our measurements corroborate previous results suggesting that the sinking of newly formed cold-water masses helps bring bubbles to greater depths than those reached in stable conditions for the water column. The temperature difference between air and sea seems sufficient for describing this intensification at the leading order of magnitude. The results presented in this study are relevant for air–sea interaction studies and pave the way for progress in CO2 gas exchange formulations. [ABSTRACT FROM AUTHOR]

Accurate estimates of extreme waves are central for maritime activities, and stochastic wave models are the best option available for practical applications. However, the way currents influence the statistics of space–time extremes in spectral wave models has not been properly assessed. Here we demonstrate impacts of the wave modulation caused by one of the world's strongest open ocean tidal currents, which reaches speeds of at least 3 m s−1. For a bimodal swell and wind sea state, we find that most intense interactions occur when the wind sea opposes the tidal current, with an increase in significant wave height and spectral steepness up to 45% and 167%, respectively. The steepness modulation strengthens the second-order Stokes contribution for the normalized extreme crests, which increases between 5% and 14% during opposing wind sea and current. The normalized extreme wave heights have a strong dependence on the narrow-bandedness parameter, which is sensitive to the variance distribution in the bimodal spectrum, and we find an increase up to 12% with currents opposing the wind sea. In another case of swell opposing a tidal jet, we find the spectral steepness to exceed the increase predicted by a simplified modulation model. We find support in single-point observations that using tidal currents as forcing in wave models improves the representation of the expected maximum waves, but that action must be taken to close the gap of measurements in strong currents. Significance Statement: The purpose of this study is to investigate how a very strong tidal current affects the surface wave field, and how it changes the stochastic extreme waves formulated for a space–time domain. Our results suggest that the expected maximum waves become more realistic when tidal currents are added as forcing in wave models. Here, the expected extremes exceed traditional model estimates, i.e., without current forcing, by more than 10%. These differences have implications for maritime operations, both in terms of planning of marine structures and for navigational purposes. However, there is a significant lack of observations in environments with such strong currents, which are needed to further verify our results. [ABSTRACT FROM AUTHOR]

Air bubbles in the upper ocean are generated mainly by wave breaking at the air-sea interface. As such, after the waves break, entrained air bubbles evolve in the turbulent flow, exchange gas with the surrounding water, and may eventually rise to the surface. To shed light on the short-term response of entrained bubbles in different stormy conditions and to assess the relationships between bubble penetration depth, mechanical and thermal forcings, and air-sea transfer velocity of CO2, a field experiment was conducted from an oceanographic research platform in the North Adriatic Sea. Air bubble plumes were measured using high-resolution echosounder data from an up-looking 1000-kHz sonar. The backscatter signal strength was sampled at a high resolution, 0.5 s in time and 2.5 cm along the vertical direction. Time series profiles of the bubble plume depth were established using a variable threshold procedure applied to the backscatter strength. The data show the occurrence of bubbles organised into vertical plume-like structures, drawn downwards by wave-generated turbulence and other near-surface circulations, and reaching the seabed at 17-m depth under strong forcing. We verify that bubble depths adapt rapidly to wind and wave conditions and scale approximately linearly with wind speed. A scaling with the wind/wave Reynolds number is proposed to account for the sea-state severity in the depth prediction. Results also show a strong connection between measured bubble depths and theoretical air-to-sea CO2 transfer velocity parametrised with wind-only and wind/wave formulations. Further, our measurements corroborate previous results suggesting that the sinking of newly formed, cold-water masses helps bring bubbles to greater depths than those reached in stable conditions for the water column. The temperature difference between air and sea seems sufficient for describing this intensification at the leading order of magnitude. The results presented in this study are relevant for air-sea interaction studies and pave the way for progress in CO2 gas exchange formulations. [ABSTRACT FROM AUTHOR]