Search

Mr. Bialetti invented Moka in 1933 and it still represents the most common way to prepare coffee at home. The process through which Mokas extract components from the ground coffee is a solid-liquid extraction which occurs at high pressure and temperature. These features are desirable in simple sample treatment strategies, since they allow good extraction efficiencies in a short time. Herein, for the first time, Moka-pot extraction was considered as an alternative processing protocol to extract polar compounds from dietary supplements. The effect of four experimental variables on extraction efficiency was evaluated through a fractional factorial design of experiments applied to a pooled matrix. In particular, solvent pH and its content of organic modifier, heating temperature and sample mass (reflecting the ratio to the amount of solvent which has to be kept fixed due to practical needs) were considered. The performances of the best conditions were then validated by determining recoveries (between 52 and 134 %, except for acetylsalicylic acid) and matrix effects (resulting always negligible or moderate at 100-fold dilution) of a spiked matrix which did not present any of the target analytes. They were finally applied to real samples, allowing to quantify some compounds, including artificial sweeteners, methylxanthines and taurine. Results were then compared with the quantities declared on the labels and those obtained with a Salt-Assisted Liquid-Liquid Extraction (SALLE), previously developed. Interestingly, the two methods were comparable for most compounds, but Moka extraction allowed to quantify taurine, which was not recovered with the SALLE. This promising result encourages further work to extend the use of the simple Moka device to other analytes and further matrices.

Abstract Within the world of natural food supplements, organic extracts deriving from young plant meristematic tissue (bud-derivatives) are becoming attractive, thanks to their richness in bioactive molecules. This natural source is scarce, but every year, tons of plant material, including buds, come from city pruning. If this sustainable source is rather promising from a circular economy point of view, the safety of the obtained supplements must be assessed. In fact, anthropic microcontaminants, such as polycyclic aromatic hydrocarbons (PAHs), could adsorb onto the urban buds, leading to a possible contamination of the bud-derivatives. In this study, we developed a magnetic dispersive solid phase extraction (m-dSPE) based on molecularly imprinted microparticles, combined with GC-MS, to quantify the 16 priority PAHs in such extracts. The D-optimal experimental design was implemented to maximize analytes’ recovery with the smallest set of experiments. The optimized method was characterized by great selectivity thanks to the molecular imprinted polymer and ease of use provided by m-dSPE. Moreover, it complies with green principles, thanks to the minimum consumption of organic solvent (1.5 mL of acetone per sample). The recoveries ranged from 76 to 100% and procedural precision was below 10% for most PAHs. Despite the matrix complexity, low quantification limits (0.7–12.6 μg kg−1) were reached. This guaranteed the PAHs’ quantitation at levels below those indicated as safe by a European Community regulation on food supplements. None of the analyzed samples, coming from different anthropically impacted areas, showed concerning PAHs levels.

The exploitation of waste and by-products in various applications is becoming a cornerstone of the circular economy. A range of biomasses can be employed to produce food supplements. An example is a particular extract obtained from plant buds (rich in bioactive molecules), which can be easily retrieved from cities’ pruning. In order to safely use this material, its possible contamination by organic pollutants needs to be estimated. A green and simple method to detect priority polycyclic aromatic hydrocarbons (PAHs) in bud samples by head space solid phase microextraction coupled to GC-MS was developed. This strategy, optimized through experimental design and response surface methodology, requires a minimal sample pre-treatment and negligible solvent consumption. The final method was found to be accurate and sensitive for PAHs with mass up to 228 Da. For these analytes, satisfactory figures of merit were achieved, with detection limits in the range 1–4 ng g−1, good inter-day precision (relative standard deviation in the range 4–11%), and satisfactory accuracy (88–105%), along with specificity guaranteed by the selected ion monitoring detection. The method was applied to bud samples coming from differently polluted areas, thus helping in estimating the safety of their use for the production of food supplements.

The determination of trace pollutants in seawater is challenging, and sampling is a crucial step in the entire analytical process. Passive samplers combine in situ sampling and preconcentration, thus limiting the tedious treatment steps of the conventional sampling methods. Their use to monitor water quality in confined marine environment could bring several advantages. In this work, the presence of organic contaminants at trace and ultra-trace levels was assessed in the Genoa Aquarium supply-and-treated water using Polar Organic Integrative Samplers (POCIS). Both untargeted gas chromatography-mass spectrometry and targeted liquid chromatography-tandem mass spectrometry were employed. The untargeted approach showed the presence of hydrocarbons, diphenyl sulfone and 2,4-di-tert-butyl-phenol. Only hydrocarbons were detected in all the samples. Nineteen emerging contaminants, belonging to different classes (pharmaceuticals, UV-filters, hormones and perfluorinated compounds), were selected for the target analysis. Thirteen analytes were detected, mainly in supply water, even though the majority of them were below the quantitation limit. It is worthy to note that two of the detected UV-filters had never been reported in seawater using the POCIS samplers. The comparison of the analytes detected in supply and treated water indicated a good performance of the Aquarium water treatment system in the abatement of seawater contaminants.