Search

SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter field and RF generators for the plasma generation. During the first 3 years of SPIDER operation different electrical issues were discovered, understood and addressed thanks to deep analyses of the experimental results supported by modelling activities. The paper gives an overview on the observed phenomena and relevant analyses to understand them, on the effectiveness of the short-term modifications provided to SPIDER to face the encountered issues and on the design principle of long-term solutions to be introduced during the currently ongoing long shutdown., Comment: 8 pages, 12 figures. Presented at SOFT 2022

Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative ions near the apertures in the plasma grid. To further improve the production of negative ions, cesium is usually evaporated inside the source and deposited onto the plasma walls, reducing the work function of the surfaces. This dramatically increases the density of negative hydrogen ions near the surfaces, causing the transition to an electronegative plasma in the vicinity of the plasma grid. This condition can be observed with Langmuir probes, which can then be used to provide a local meaurement of negative ion density in the ion source. In this paper we use the measurements provided by the Langmuir probe sensors embedded in the plasma grid of SPIDER, the prototype ion source of ITER NBIs, to determine the density of negative ions. A fitting method based on the determination of the collection area of the different plasma species is proposed and adapted to SPIDER experimental condition, taking into account the shape of the probes and the local topology of the magnetic field. The method is then applied to the experimental data, determining the densities of the positive and negative ions and of the electrons during a plasma pulse. Finally, a vertical array of four probes in the plasma grid is used to assess the vertical profile of plasma parameters., Comment: 12 pages, 7 figures, contributed paper to the NIBS 22 conference. Submitted to Journal of Instrumentation

The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H-/D- ions, generated by a radiofrequency plasma source coupled to an ion acceleration system. A prototype of the ITER HNB ion source is being tested in the SPIDER experiment, part of the ITER Neutral Beam Test Facility at Consorzio RFX. Reaching the design targets for beam current density and fraction of coextracted electrons is only possible by evaporating cesium in the source, in particular on the plasma facing grid (PG) of the acceleration system. In this way the work function of the surfaces decreases, significantly increasing the amount of surface reactions that convert neutrals and positive ions into H-/D-. It is then of paramount importance to monitor the density of negative ions and the density of Cs in the proximity of the PG. Monitoring the Cs spatial distribution along the PG is also essential to guarantee the uniformity of the beam current. In SPIDER, this is possible thanks to the Cavity Ringdown Spectroscopy (CRDS) and the Laser absorption Spectroscopy diagnostics (LAS), which provide line-integrated measurements of negative ion density and neutral, ground state Cs density, respectively. The paper discusses the CRDS and LAS measurements as a function of input power and of the magnetic and electric fields used to reduce the coextraction of electrons. Negative ion density data are in qualitative agreement with the analogous measurements in Cs-free conditions. In agreement with simulations, Cs density is peaked in the center of the source; a top/bottom non uniformity is also present. Several effects of plasma on Cs deposition and negative ion production are presented., Comment: 21 pages, 12 figures. Paper (accepted manuscript) following the poster contribution at the SOFT 2022 conference. Published in Fusion Engineering and Design