Search

We present the method behind HubPUG, a software tool built for recovering systemic proper motions (PMs) of targets (e.g. clusters or resolved galaxies) in Hubble Space Telescope (HST) fields with two epochs of observations by utilizing stars observed by Gaia as a foreground frame of reference.HST PM experiments have typically relied on the use of distant background galaxies or quasi-stellar objects (QSOs) as stationary sources against which to measure PMs. Without consistent profiles, background galaxies are more difficult to centroid, but benefit on-aggregate from their large numbers. QSOs, though they can be fit with stellar point-spread functions, are sparse, with most fields containing none. Historically, the use of stars as references against which to measure PMs would have been difficult because they have individual PMs of their own. However, Gaia has now provided positions and PMs for over 1.4 billion stars, which are much more likely to be well-imaged in the fields around targets versus background sources, have predictable stellar profiles, and require less observing time per-image for good signal-to-noise. This technique allows us to utilize the power of Gaia to measure the PM of targets too faint for Gaia to observe itself. We have recovered PMs for the Milky Way satellites Sculptor and Draco with comparable uncertainties over HST-only and Gaia-only measurements, limited primarily by the current capabilities of the Gaia data. We also show the promise of this method for satellites of M31 with a new PM measurement for Andromeda VII.

Poster for the Spanish Astronomical Society General Assembly.

Ground-based and airborne instrumentation for astronomy IX (2022), Montreal, JUL 17-22, 2022.--Proceedings of SPIE - The International Society for Optical Engineering vol. 12184 Article number 121840M.-- Complete list of authors: Marin-Franch, A.; Rueda-Teruel, S.; Lopez Alegre, G.; Iniguez, C.; Vazquez Ramio, H.; Ederoclite, A.; Bello, R.; Royo-Navarro, M.; Casino-Martin, J. M.; Lozano-Perez, D.; Molina-Ibanez, E. L.; Rueda-Teruel, F.; Yanes-Diaz, A.; del Pino, A.; Lopez-Sanjuan, C.; Cenarro, A. J.; Cristobal-Hornillos, D.; Hernan-Caballero, A.; Moles, M.; Varela, J.; Bielsa de Toledo, S.; Chueca, S.; Domingez-Martinez, M.; Garces-Cubel, D.; Martinez-Olivar, N.; Munoz-Maudos, J.; Rueda-Asensio, H.; Soriano-Laguia, I.; Castillo, J.; Civera, T.; Hernandez-Fuertes, J.; Lopez-Sainz, A.; Moreno-Signes, A.; Muniesa-Gallardo, D.; Taylor, K.; Santoro, F.; Cepa, J.; Fermino, C.; Bastable, M.; Haddow, G.; Palmer, I.; Simpson, C.; Spatola, A.; Sweeney, H.; Tatard, C.; Watkins, M.; Brauneck, U.; Casalta, J. M.; Abramo, R.; Alcaniz, J.; Benitez, N.; Bonoli, S.; Carneiro, S.; Dupke, R.; Mendes de Oliveira, C.; Sodre, L., Jr.; Vilchez, J., Commissioning results, on-sky performance and first operations of the Javalambre Panoramic Camera (JPCam) are presented in this paper. JPCam is a 1.2 Gpixel camera deployed on the 2.6m, large field-of-vie Javalambre Survey Telescope (JST250) at the Observatorio Astrofisico de Javalambre. JPCam has been conceived to perform J-PAS, a photometric survey of several thousand square degrees of the northern sky in 56 optical bands, 54 of them narrow-band filters (145 angstrom FWHM), contiguous and equi-spaced between 370 and 920nm, producing a low resolution photo-spectrum of every pixel of the observed sky, hence promising crucial breakthroughs in Cosmology and galaxy formation and evolution. JPCam has been designed to maximize field-of-view and wavelength coverage while guaranteeing a high image quality over the entire focal plane. To this aim, JPCam is equipped with a mosaic of 14 9.2k x 9.2k, 10 mu m pixel, low noise detectors from Teledyne-E2V, providing a FoV of 4.1 square degrees with a plate scale of 0.2267''/pix. In full frame mode, camera electronics allows read times of 10.9s at 633kHz read frequency (16.4s at 400kHz) with a readout noise of 5.5e(-) (4.3e(-)). Its filter unit admits 5 filter trays, each mounting 14 filters corresponding to the 14 CCDs of the mosaic and allowing all the J-PAS filters to be permanently installed. To fully optimize image quality, position of JST250 secondary mirror and JPCam focal plane are maintained optically aligned by means of two hexapod systems. To perform this task, JPCam includes 12 auxiliary detectors, 4 for autoguiding and 8 for image quality control through wavefront sensing., Based on observations made with the JST250 telescope and JPCam at the Observatorio Astrofisico de Javalambre (OAJ), in Teruel, owned, managed, and operated by the Centro de Estudios de Fisica del Cosmos de Aragon (CEFCA). We acknowledge the OAJ Data Processing and Archiving Unit (UPAD) for reducing and calibrating the OAJ data used in this work. Funding for the J-PAS Project has been provided by the Governments of Spain and Aragon through the Fondo de Inversion de Teruel, European FEDER funding and the Spanish Ministry of Science, Innovation and Universities, and by the Brazilian agencies FINEP, FAPESP, FAPERJ and by the National Observatory of Brazil. Additional funding was also provided by the Tartu Observatory and by the J-PAS Chinese Astronomical Consortium., With funding from the Spanish government through the Severo Ochoa Centre of Excellence accreditation SEV-2017-0709

We present a kinematic study of six dwarf spheroidal galaxies (dSph) satellites of the Milky Way (MW), namely Carina, Draco, Fornax, Sculptor, Sextans, and Ursa Minor. We combine proper motions (PMs) from the $Gaia$ Data Release 3 (DR3) and line-of-sight velocities ($v_{\mathrm{los}}$) from the literature to derive their 3D internal kinematics and to study the presence of internal velocity gradients. We find velocity gradients along the line-of-sight for Carina, Draco, Fornax, and Ursa Minor, at $\geq 1\sigma$ level of significance . The value of such gradients appears to be related to the orbital history of the dwarfs, indicating that the interaction with the MW is causing them. Dwarfs that are close to the MW and moving towards their orbits pericentres show, on average, larger velocity gradients. On the other hand, dwarfs that have recently left their orbits pericentres show no significant gradients. Lastly, dwarfs located at large Galactocentric distances show gradients with an intermediate intensity. Our results would indicate that the torque caused by the strong tidal forces exerted by the MW induces a strong velocity gradient when the dwarfs approach their orbits pericentres. During the pericentre passage, the rapid change in the forces direction would disrupt such gradient, which may steadily recover as the galaxies recede. We assess our findings by analysing dwarfs satellites from the TNG50 simulation. We find a significant increase in the intensity of the detected gradients as the satellites approach their pericentre, followed by a sharp drop as they abandon it, supporting our results for the dSphs of the MW., Comment: 13 pages, 9 figures, 1 table. Accepted for publication in MNRAS

The Observatorio Astrof\'isico de Javalambre (OAJ{\dag}1) in Spain is a young astronomical facility, conceived and developed from the beginning as a fully automated observatory with the main goal of optimizing the processes in the scientific and general operation of the Observatory. The OAJ has been particularly conceived for carrying out large sky surveys with two unprecedented telescopes of unusually large fields of view (FoV): the JST/T250, a 2.55m telescope of 3deg field of view, and the JAST/T80, an 83cm telescope of 2deg field of view. The most immediate objective of the two telescopes for the next years is carrying out two unique photometric surveys of several thousands square degrees, J-PAS{\dag}2 and J-PLUS{\dag}3, each of them with a wide range of scientific applications, like e.g. large structure cosmology and Dark Energy, galaxy evolution, supernovae, Milky Way structure, exoplanets, among many others. To do that, JST and JAST are equipped with panoramic cameras under development within the J-PAS collaboration, JPCam and T80Cam respectively, which make use of large format (~ 10k x 10k) CCDs covering the entire focal plane. This paper describes in detail, from operations point of view, a comparison between the detailed cost of the global automation of the Observatory and the standard automation cost for astronomical facilities, in reference to the total investment and highlighting all benefits obtained from this approach and difficulties encountered. The paper also describes the engineering development of the overall facilities and infrastructures for the fully automated observatory and a global overview of current status, pinpointing lessons learned in order to boost observatory operations performance, achieving scientific targets, maintaining quality requirements, but also minimizing operation cost and human resources., Comment: Global Observatory Control System GOCS

We present GaiaHub, a publicly available tool that combines $Gaia$ measurements with $Hubble$ $Space$ $Telescope$ ($HST$) archival images to derive proper motions (PMs). It increases the scientific impact of both observatories beyond their individual capabilities. $Gaia$ provides PMs across the whole sky, but the limited mirror size and time baseline restrict the best PM performance to relatively bright stars. $HST$ can measure accurate PMs for much fainter stars over a small field, but this requires two epochs of observation which are not always available. GaiaHub yields considerably improved PM accuracy compared to $Gaia$-only measurements, especially for faint sources $(G \gtrsim 18)$, requiring only a single epoch of $HST$ data observed more than $\sim 7$ years ago (before 2012). This provides considerable scientific value especially for dynamical studies of stellar systems or structures in and beyond the Milky Way (MW) halo, for which the member stars are generally faint. To illustrate the capabilities and demonstrate the accuracy of GaiaHub, we apply it to samples of MW globular clusters (GCs) and classical dwarf spheroidal (dSph) satellite galaxies. This allows us, e.g., to measure the velocity dispersions in the plane of the sky for objects out to and beyond $\sim 100$ kpc. We find, on average, mild radial velocity anisotropy in GCs, consistent with existing results for more nearby samples. We observe a correlation between the internal kinematics of the clusters and their ellipticity, with more isotropic clusters being, on average, more round. Our results also support previous findings that Draco and Sculptor dSph galaxies appear to be radially anisotropic systems., Comment: 24 pages, 18 figures. Accepted for publication in ApJ

We have determined bulk proper motions (PMs) for 31 LMC GCs from Gaia eDR3 and Hubble Space Telescope data using multiple independent analysis techniques. Combined with literature values for distances, line-of-sight velocities and existing bulk PMs, we extract full 6D phase-space information for 32 clusters, allowing us to examine the kinematics of the LMC GC system in detail. Except for two GCs (NGC 2159 and NGC 2210) for which high velocities suggest they are not long-term members of the LMC system, the data are consistent with a flattened configuration that rotates like the stellar disk. The one-dimensional velocity dispersions are of order 30 km/s, similar to that of old stellar populations in the LMC disk. Similar to the case for Milky Way disk clusters, the velocity anisotropy is such that the dispersion is smallest in the azimuthal direction; however, alternative anisotropies cannot be ruled out due to distance uncertainties. The data are consistent with a single multi-dimensional Gaussian velocity distribution. Given the non-collisional nature of the LMC disk, this suggests that most, if not all, of the LMC GCs are formed by a single formation mechanism in the stellar disk, despite a significant spread in age and metallicity. Any accreted halo GC population is absent or far smaller in the LMC compared to the Milky Way., Comment: Accepted by ApJ, 19 pages, 5 figures, 4 tables