Search

Purpose: This paper is aimed at the determination of digestate potential in a long-term carbon accumulation after its application as a biofertilizer. Method: Literature survey of > 1000 papers was conducted and resulted in a selection of 21 papers that involved data of soil C accumulation after digestate addition for at least a period of 12 months. Meta-analysis was used for data analysis and interpretation of a large database. The results of incorporation of total organic carbon in the soil after digestate biofertilization were measured by one-way analysis of variance (ANOVA). Results: A comprehensive literature review showed trends for carbon increase in the soil for different experiment periods up to 84 months and initial content of carbon in the soil. It was demonstrated that application of digestate, a byproduct of anaerobic digestion, to agricultural soils resulted in an increase of soil carbon content for a period of up to 8 years. Specifically, digestate derived from cow and pig manure had the highest potential to enhance soil carbon accumulation compared to digestate from other organic residues including food waste and sewage sludge, highlighting the need for a proper choice of the waste substrate used in anaerobic digestion. Soil carbon accumulation is notably more pronounced when digestate is applied to soils with low organic matter content, particularly sandy and loam soils. Conclusion: While digestate application to soils is typically used to substitute mineral fertilizers, it also leads to an overall increase in soil carbon content. Research Highlights • Among different types of manure cow and pig manure showed the highest results in the terms of long term (> 12 months) carbon accumulation in the soil after biofertilization. • A general tendency of lower carbon increase in the soil for the period of 12 months and maximum increase at 36 months of experiment was found. • Digestate can be very successfully used to help reforestation efforts, as they usually have lower soil C content than natural areas. • Obtained results for the period of more than 12 months showed the highest soil carbon increase (more than 2% per month) for sandy soil. • Wheat and maize were found to be the best crops in terms of the potential for carbon accumulation in the soil after digestate biofertilization.

Abstract Proper pretreatment of organic residues prior to anaerobic digestion (AD) can maximize global biogas production from varying sources without increasing the amount of digestate, contributing to global decarbonization goals. However, the efficiency of pretreatments applied on varying organic streams is poorly assessed. Thus, we performed a meta-analysis on AD studies to evaluate the efficiencies of pretreatments with respect to biogas production measured as methane yield. Based on 1374 observations our analysis shows that pretreatment efficiency is dependent on substrate chemical dominance. Grouping substrates by chemical composition e.g., lignocellulosic-, protein- and lipid-rich dominance helps to highlight the appropriate choice of pretreatment that supports maximum substrate degradation and more efficient conversion to biogas. Methane yield can undergo an impactful increase compared to untreated controls if proper pretreatment of substrates of a given chemical dominance is applied. Non-significant or even adverse effects on AD are, however, observed when the substrate chemical dominance is disregarded.

Abstract Natural environments with frequent drainage experience drying and rewetting events that impose fluctuations in water availability and oxygen exposure. These relatively dramatic cycles profoundly impact microbial activity in the environment and subsequent emissions of methane and carbon dioxide. In this study, we mimicked drying and rewetting events by submitting methanogenic communities from strictly anaerobic environments (anaerobic digestors) with different phylogenetic structures to consecutive desiccation events under aerobic (air) and anaerobic (nitrogen) conditions followed by rewetting. We showed that methane production quickly recovered after each rewetting, and surprisingly, no significant difference was observed between the effects of the aerobic or anaerobic desiccation events. There was a slight change in the microbial community structure and a decrease in methane production rates after consecutive drying and rewetting, which can be attributed to a depletion of the pool of available organic matter or the inhibition of the methanogenic communities. These observations indicate that in comparison to the drying and rewetting events or oxygen exposure, the initial phylogenetic structure and the organic matter quantity and quality exhibited a stronger influence on the methanogenic communities and overall microbial community responses. These results change the current paradigm of the sensitivity of strict anaerobic microorganisms to oxygen exposure.

Abstract A significant proportion of carbon (C) captured by terrestrial primary production is buried in lacustrine ecosystems, which have been substantially affected by anthropogenic activities globally. However, there is a scarcity of sedimentary organic carbon (OC) accumulation information for lakes surrounded by highly productive rainforests at warm tropical latitudes, or in response to land cover and climate change. Here, we combine new data from intensive campaigns spanning 13 lakes across remote Amazonian regions with a broad literature compilation, to produce the first spatially-weighted global analysis of recent OC burial in lakes (over ~50-100-years) that integrates both biome type and forest cover. We find that humid tropical forest lake sediments are a disproportionately important global OC sink of 7.4 Tg C yr−1 with implications for climate change. Further, we demonstrate that temperature and forest conservation are key factors in maintaining massive organic carbon pools in tropical lacustrine sediments.

The purpose of the paper is to determine the environmentally safe and economically feasible technology of biofertilizer production from the digestate including dewatering process. Methodological basis is based on the systematic approach to the determination of factors effected on the distribution of nutrients and pollutants between liquid and solid fractions after digestate separation. The paper analyzes modern technologies aimed at dewatering the digestate and reduction of its volume, showed their effectiveness. These technologies allow expanding the opportunities for commercialization of the digestate, increasing the cost of its transportation and application to the soil instead of complex fertilizers, using some valuable products. The results of the study showed that the ecological quality of the digestate is the highest as well as co-digested thermally pre-treated feedstock is used for solid-liquid separation in centrifuge with polymer addition as post-treatment approach to the flocculation. In order to increase efficiency of biofertilizer application the technological scheme of production process of granular fertilizers from digestate was proposed. Special feature of this scheme is in the use of phosphogypsum binder for the production of organo-mineral fertilizer that contributes phosphogypsum recycling in the waste management system.

ABSTRACT Habitat fragmentation is one of the leading causes of edge genesis and its effects. Functional tree traits such as wood density, height, and diameter are essential variables from which it is possible to infer several ecological processes. This study assessed the variability of the functional traits of trees over two habitats (edge and interior) of a forest remnant. The hypothesis tested were i) the functional traits would have lower values at the edges than the interior, and ii) environmental variables would influence such differences. This study was carried out in the largest Atlantic Forest remnant within Serra da Tiririca State Park, Brazil, by establishing ten plots (50 × 20 m) among different habitats. Within each plot, wood samples were taken from all trees with a diameter of = 10 cm. It was recorded the altitude, distance from the plots to the edge, and fire records as possible explanatory variables (environmental variables). Wood density was obtained using the immersion method. To verify differences in functional traits by habitat, the Wilcoxon test was applied. Additionally, the influence of explanatory variables on functional traits through generalized linear models was evaluated. One hundred eighty-five trees were recorded at the edges and 218 trees at the interior of the remnant. Wood density and tree height were significantly lower in the edges than in the interior. Furthermore, the best models indicated significant relationships between wood density and habitats, as well as diameter and distance to the edge. This study was effective in raising suitable variables to predict edge effects.

The textile industry is one of the largest environmental polluters in the world. Although waste management via anaerobic digestion (AD) is a sustainable strategy to transform waste into clean energy and water recovery, the efficiency of the AD process is reduced by the presence of recalcitrant materials, chemicals, and toxic contents. This study aims to investigate the performance of several chemical, physical, and biological pretreatments applied to improve the biodegradability of textile waste. We performed a meta-analysis with 117 data extracted from 13 published articles that evaluated the efficiency of pretreatments applied to textile waste prior to AD to increase biogas production measured as methane (CH4) yield. Even though the majority of the studies have focused on the effect of chemical and physical pretreatments, our results showed that the application of biological pretreatments are more efficient and eco-friendlier. Biological pretreatments can increase CH4 yield by up to 360% with lower environmental risk and lower operating costs, while producing clean energy and a cleaner waste stream. Biological pretreatments also avoid the addition of chemicals and favor the reuse of textile wastewater, decreasing the current demand for clean water and increasing resource circularity in the textile industry.

Reaching climate goals depends on appropriate and accurate methods to quantify greenhouse gas (GHG) fluxes and to verify that efforts to mitigate GHG emissions are effective. We here highlight critical advantages, limitations, and needs regarding GHG flux measurement methods, identified from an analysis of >13 500 scientific publications regarding three long-lived GHGs, carbon dioxide (CO _2 ), methane (CH _4 ), and nitrous oxide (N _2 O). While existing methods are well-suited for assessing atmospheric changes and local fluxes, they are expensive and have limited accessibility. Further, we are typically forced to choose between methods for very local GHG sources and sinks and their regulation (m ^2 -scaled measurements), or methods for aggregated net fluxes at >ha or km ^2 scales measurements. The results highlight the key need of accessible and affordable GHG flux measurement methods for the many flux types not quantifiable from fossil fuel use, to better verify inventories and mitigation efforts for transparency and accountability under the Paris agreement. The situation also calls for novel methods, capable of quantifying large scale GHG flux patterns while simultaneously distinguishing local source and sink dynamics and reveal flux regulation, representing key knowledge for quantitative GHG flux modeling. Possible strategies to address the identified GHG flux measurement method needs are discussed. The analysis also generated indications of how GHG flux measurements have been distributed geographically and across flux types, which are reported.