Search

As the world's demand for sustainable and reliable energy source intensifies, the need for efficient energy storage systems has become increasingly critical to ensuring a reliable energy supply, especially given the intermittent nature of renewable sources. There exist several energy storage methods, and this paper reviews and addresses their growing requirements. In this paper, the energy storage options are subdivided according to their primary discipline, including electrical, mechanical, thermal, and chemical. Different possible options for energy storage under each discipline have been assessed and analyzed, and based on these options, a handsome discussion has been made analyzing these technologies in the hybrid mode for efficient and reliable operation, their advantages, and their limitations. Moreover, combinations of each storage element, hybrid energy storage systems (HESSs), are systems that combine the characteristics of different storage elements for fulfilling the gap between energy supply and demand. HESSs for different storage systems such as pumped hydro storage (PHS), battery bank (BB), compressed air energy storage (CAES), flywheel energy storage system (FESS), supercapacitor, superconducting magnetic coil, and hydrogen storage are reviewed to view the possibilities for hybrid storage that may help to make more stable energy systems in the future. This review of combinations of different storage elements is made based on the previous literature. Moreover, it is assessed that sodium-sulfur batteries, lithium-ion batteries, and advanced batteries are the most helpful element in HESSs, as they can be hybridized with different storage elements to fulfill electricity needs. The results also show that HESSs outperformed other storage systems and, hence, hybridizing the characteristics of different storage elements can be employed for optimizing the performance of energy storage systems. [ABSTRACT FROM AUTHOR]

Predicting the need for modeling and solutions is one of the largest difficulties in the electricity system. The static-constrained solution, which is not always powerful, is provided by the Gradient Method Power Flow (GMPF). Another benefit of using both dynamic and transient restrictions is that GMPF will increase transient stability against faults. The system is observed under contingency situations using the Dynamic Stability for Constrained Gradient Method Power Flow (DSCGMPF). The population optimization technique is the foundation of a recent algorithm called Training Learning Based Optimization (TLBO). The TLBO-based approach for obtaining DSCGMPF is implemented in this work. The total system losses and the cost of the individual generators have been optimized. Analysis of the stability limits under contingency conditions has been conducted as well. To illustrate the suggested approaches, a Standard 3 machine 5-bus system is simulated using the MATLAB 2022B platform. [ABSTRACT FROM AUTHOR]

Hybrid microgrids, integrating local energy resources, present a promising but challenging solution, especially in areas with limited or no access to the national grid. Reliable operation of off-grid energy systems necessitates sustainable energy sources, given the intermittent nature of renewables. While fossil fuel diesel generators mitigate risks, they increase carbon emissions. This study assesses the viability of integrating a very small modular renewable energy reactor into a microgrid for replacing conventional diesel generators, substantially curbing greenhouse gas emissions. A comprehensive analysis, including design and economic evaluation, was conducted for an off-grid community microgrid with an annual generation and load of 8.5 GWh and 7.8 GWh, respectively. The proposed microgrid configurations incorporate very small modular reactors, alongside solar, wind, and battery storage systems. MATLAB modeling and simulation across eight cases, accounting for seasonal variations, demonstrate the technical and economic feasibility of case 7. This configuration, integrating modular reactors, photovoltaics, wind turbines, and battery storage, satisfactorily meets load demands. Notably, it boasts a high internal rate of return up to ~31% and a shorter payback period of around 4 years compared to alternative scenarios. [ABSTRACT FROM AUTHOR]

This study presents an advanced Model Predictive Control (MPC) technique designed to mitigate Circulating Current (CC) in HVDC systems equipped with Modular Multilevel Converters (MMC). This MPC strategy eliminates the need for traditional PI regulators and pulse width modulation, improving system dynamics and control accuracy. It excels in managing output currents and mitigating voltage fluctuations in sub-module capacitors. Moreover, the paper introduces a novel communication-free Fault Ride-Through (FRT) method that makes a DC chopper redundant, enabling rapid recovery from disturbances. To reduce the computational burden of standard MPC algorithms, an aggregated MMC model is proposed, significantly decreasing the computational complexity. Simulation studies validate the new MPC algorithm's capability in regulating AC side current, reducing CC, and ensuring capacitor voltage stability under varying conditions. The findings indicate that the proposed MPC controller outperforms traditional PI and PR-based methods, offering enhanced dynamic response, decreased steady-state error, and lowered converter losses, which contribute to smoother DC link voltages. Future research will focus on system scalability, renewable energy integration, and empirical validation through hardware-in-the-loop testing. [ABSTRACT FROM AUTHOR]

Active islanding detection techniques majorly affect power quality due to injected harmonic signals, whereas passive methods have a large non-detection zone (NDZ). This article presents a new method based on the resultant sequential impedance component (RSIC) as a new approach to island detection with zero NDZs. The abrupt variable in the conventional impedance approach was replaced by the RSIC of the inverter in this method. When the measured value exceeds the threshold range, islanding is detected by monitoring the variations in the RSIC at the point of common coupling (PCC). For proper power utilization in the identified islands, a priority-based load-shedding strategy is also recommended and implemented in this article. Its efficacy was verified in a wide range of real-world settings. It offers superior stability in various non-islanding (NIS) scenarios to prevent accidental tripping. The proposed method advantages include a cheap cost, the simplicity of implementation, independence from the number and type of distributed generation (DG) units connected, and no power quality effects. Compared to other methods reported in the literature, the obtained detection times illustrate that the proposed method is superior. [ABSTRACT FROM AUTHOR]

This paper discusses and analyses the work done in developing a Nature‐inspired optimization algorithm in a solar PV system for tracking the global maximum power point (GMPP) in partial shaded condition (PSC). Partial shading is a situation where PV panels connected in series do not receive the same solar radiation, thus exhibiting different I‐V characteristics for the individual panel. Under PSC, solar PV system output exhibits multiple local maximum power point (MPP) and a unique global MPP on the Power‐Voltage curve. Conventional maximum power point tracking (MPPT) techniques such as Perturb and Observe (P&O), incremental conductance (IC), and Hill Climbing (HC) method can only track MPP under uniform insolation conditions. It may fail to track GMPP in case of PSC and get trapped in local MPP, thereby causing loss of power that could have been tapped if the operation would have been at GMPP. To overcome the problem posed by PSC, researchers are applying the nature‐inspired optimization algorithm for tracking GMPP under partial shading conditions with fairly good results. Nature‐inspired optimization algorithm offers the advantage of solving multivariable nonlinear objective functions with constraints by exploiting the search space and can converge quickly to GMPP. Some of the most recent and famous nature‐inspired algorithms have been discussed and compared here. Simulation and hardware results of some of them are also taken in order to compare them effectively. Simulation results show that the Most Valuable Player Algorithm (MVPA) takes the least time to track the MPP in all the cases, and the MPP tracked is also comparable to the maximum while PSO with differentially perturbed velocity (PSO_DV) takes the maximum time to track the MPP in all cases. [ABSTRACT FROM AUTHOR]

The feasibility of power transfer enhancement, through simultaneous AC–DC power transmission in a two-terminal transmission network, has been proposed earlier by the authors, and the concept is well established. To meet the increase in demand for electricity, a new technique is proposed in this article to increase the use of existing transmission lines in addition to independent control of AC and DC power flow. This paper extends the concept to a three-terminal transmission network by considering a power tapping from the middle of the line. DC is also superimposed in the already existing three-terminal AC transmission system. In the proposed topology, a multi-terminal simultaneous AC–DC system is used, which is integrated with a zig-zag transformer and more than two voltage source converter (VSC) stations. Each terminal may represent an area of the power system. Anyone/two-terminal(s) may act as sending end, whereas the remaining two/one terminal(s) may act as receiving end. Power can flow in either direction through each segment of the transmission system. At sending end, VSC converts a part of AC to DC and injects it into the neutral of the zig-zag transformer. On receiving terminal, DC power is tapped from neutral of zig-zag transformer and fed to VSC for conversion back to AC. The concept is verified in the digital simulation software PSCAD/EMTDC. [ABSTRACT FROM AUTHOR]

Solid-state transformers (SSTs) have emerged as a superior alternative to conventional transformers and are regarded as the building block of the future smart grid. They incorporate power electronics circuitry and high-frequency operation, which allows high controllability and enables bi-directional power flow, overcoming the limitations of conventional transformers. This paper presents a detailed analysis of the solid-state transformer, expounding the fundamentals, converter topologies, applications, and future challenges of the SST in a systematic manner. The paper discusses the necessity of improved replacement of the low-frequency transformers (LFTs) and presents the configuration of SST. It presents SST fundamentals in individual stages and explores its origin and evolution. The basic topologies, their specifications, and control strategies are also described. The applications of SST as a replacement of LFTs are discussed along with recent applications. The future challenges for real-time implementation of SSTs are explored, and research directions are proposed. [ABSTRACT FROM AUTHOR]