Search

This research was conducted to analyse the possibility of using raw, untreated recycled tyre fibres as an effective concrete reinforcement according to circular economy principles. The aim of the article was also to develop a method for dispensing tire fibres on a real scale. Additional treatment and homogenisation of recycled steel fibres entail higher energy consumption, emissions of greenhouse gases, and increased costs. However, obtaining durable and safe concrete effectively reinforced with steel fibres is critical. Finding a balance between environmental friendliness and product durability is a circular economic challenge. Reference concrete with commercial steel fibres (15 kg/m3) and two concretes containing various quantities of non-treated, raw tyre recycled fibres (25 kg/m3 and 45 kg/m3) were industrially produced. Tests were carried out on the properties of the concrete mixture and hardened concrete, such as compressive strength, flexural strength, splitting strength, modulus of elasticity, residual flexural tensile strength, and fibre distribution in concrete. Tests revealed that increasing the amount of raw tyre fibres disturbs the structure and causes air entrainment and the formation of fibre clusters. Smaller quantities of raw tyre fibres turn out an effective concrete reinforcement. The use of non-treated tyre fibres as concrete reinforcement is possible but requires more stringent control of the concrete parameters. Implementation tests on an industrial scale are a novelty in this study, presenting an analysis of the possible dispensing of tyre fibres in a ready-mixed concrete production plant and testing the characteristics of manufactured concrete.

Curing compounds are widely used materials that are used in place of other methods of curing fresh concrete. The article presents an overview of the effectiveness of the concrete curing compounds widely used in Europe. Eleven different products have been tested. FTIR spectroscopy identification tests showed that all tested products might be divided into two main groups, depending on the type of their active substance. The water retention efficiency of each curing compound was examined, and the tensile strength of the cured samples was tested using the pull-off method. The dry mass content of the tested products was examined to check for a correlation between their effectiveness and active substance content. The microstructure of mortars treated with the most effective compounds and the reference mortar were examined using SEM techniques. Significant differences in microstructure were found between cured samples with different curing compounds, and also with uncured samples.

The role of searching for industrial waste management solutions in construction is key for environmental protection. Research in recent years has focused on solutions aimed at reducing the carbon footprint. This paper presents the results of tests conducted on concrete reinforced with treated recycled tyre steel fibres (RTSFs) compared to the same amount of manufactured steel fibres (MSFs). The effectiveness of concrete reinforcement with RTSFs was analysed using the fracture mechanics parameters of cementitious composites. Rheological tests, residual flexural tensile strength tests, work of fracture measurements, toughness indices, examinations of the fibre distribution in the concrete, and SEM observations of the concrete fractures with fibres were performed. Determining the work of fracture and toughness indices was an innovative aspect of this paper. As the amount of RTSFs increased, a decrease in the consistency was observed, although the distribution of fibres in the concrete was uniform, as proven by the results of computer tomography tests. Concrete reinforced with RTSFs that is purified and refined during the recycling process might have better properties than concrete reinforced with the same amount of MSFs. The application of RTSFs in construction has environmental and economic benefits in addition to the strengthening of cementitious composites.