Search

ABSTRACT: Objectives: The purpose of this work was to optimise printable polycaprolactone (PCL)/β-tricalcium phosphate (β-TCP) biomaterials with high percentages of β-TCP endowed with balanced mechanical characteristics to resemble human cancellous bone, presumably improving osteogenesis. Methods: PCL/β-TCP scaffolds were obtained from customised filaments for fused deposition modelling (FDM) 3D printing with increasing amounts of β-TCP. Samples mechanical features, surface topography and wettability were evaluated as well as cytocompatibility assays, cell adhesion and differentiation. Results: The parameters of the newly fabricated materila were optimal for PCL/β-TCP scaffold fabrication. Composite surfaces showed higher hydrophilicity compared with the controls, and their surface roughness sharply was higher, possibly due to the presence of β-TCP. The Young's modulus of the composites was significantly higher than that of pristine PCL, indicating that the intrinsic strength of β-TCP is beneficial for enhancing the elastic modulus of the composite biomaterials. All novel composite biomaterials supported greater cellular growth and stronger osteoblastic differentiation compared with the PCL control. Conclusions: This project highlights the possibility to fabricat, through an FDM solvent-free approach, PCL/β-TCP scaffolds of up to 70 % concentrations of β-TCP. overcoming the current lmit of 60 % stated in the literature. The combination of 3D printing and customised biomaterials allowed production of highly personalised scaffolds with optimal mechanical and biological features resembling the natural structure and the composition of bone. This underlines the promise of such structures for innovative approaches for bone and periodontal regeneration. more...

Abstract The need for direct X-ray detection under high photon flux with moderate or high energies (30–100 keV range) has strongly increased with the rise of the 4th Generation Synchrotron Light Sources, characterised by extremely brilliant beamlines, and of other applications such as spectral computed tomography in medicine and non-destructive tests for industry. The novel Cadmium Zinc Telluride (CZT) developed by Redlen Technologies can be considered the reference material for high-flux applications (HF-CZT). The enhanced charge transport properties of the holes allow the mitigation of the effects of radiation induced polarization phenomena, typically observed in standard CZT materials (LF-CZT) under high photon flux. However, standard LF-CZT electrical contacts led to inacceptable high dark leakage currents on HF-CZT devices. In this work, a detailed study on the characteristics of new optimized sputtered platinum electrical contacts on HF-CZT detectors is reported. The results from electrical and spectroscopic investigations, showed the best performances on HF-CZT detectors with platinum anode, coupled with both platinum or gold cathode. The morphology, structure, and composition of Pt/CZT contact have been analysed by means of Transmission Electron Microscopy (TEM) on microscopic lamellas obtained by Focused Ion Beam (FIB), highlighting the presence of CdTeO3 oxide at the metal semiconductor interface. more...

This manuscript reports the application of sensors for water use efficiency with a focus on the application of an in vivo OECT biosensor. In two distinct experimental trials, the in vivo sensor bioristor was applied in yellow kiwi plants to monitor, in real-time and continuously, the changes in the composition and concentration of the plant sap in an open field during plant growth and development. The bioristor response and physiological data, together with other fruit sensor monitoring data, were acquired and combined in both trials, giving a complete picture of the biosphere conditions. A high correlation was observed between the bioristor index (ΔIgs), the canopy cover expressed as the fraction of intercepted PAR (fi_PAR), and the soil water content (SWC). In addition, the bioristor was confirmed to be a good proxy for the occurrence of drought in kiwi plants; in fact, a period of drought stress was identified within the month of July. A novelty of the bioristor measurements was their ability to detect in advance the occurrence of defoliation, thereby reducing yield and quality losses. A plant-based irrigation protocol can be achieved and tailored based on real plant needs, increasing water use sustainability and preserving high-quality standards. more...

Kaonic atoms are an extremely efficient tool to investigate the strong interaction at the low energy Frontier, since they provide direct access to the K−N interaction at threshold, eliminating the necessity for extrapolation, unlike in the case of scattering experiments. During the 1970s and 1980s, extensive studies were performed on kaonic atoms spanning across a broad spectrum of elements in the periodic table, ranging from lithium to uranium. These measurements provided inputs and constraints for the theoretical description of the antikaon-nuclei interaction potential. Nevertheless, the existing data suffer from significant experimental uncertainties, and numerous measurements have been found to be inconsistent with more recent measurements that utilize advanced detector technology. Furthermore, there remain numerous transitions of kaonic atoms that have yet to be measured. For these reasons, a new era of kaonic atoms studies is mandatory. The DAΦNE electron-positron collider at the INFN Laboratory of Frascati (INFN-LNF) stands out as a unique source of low-energy kaons, having been utilized by Collaborations such as DEAR, SIDDHARTA, and AMADEUS for groundbreaking measurements of kaonic atoms and kaon-nuclei interactions. Presently, the SIDDHARTA-2 experiment is installed at DAΦNE, aiming to perform the first-ever measurement of the 2p → 1s x-ray transition in kaonic deuterium, a crucial step towards determining the isospin-dependent antikaon-nucleon scattering lengths. Based on the experience gained with the SIDDHARTA experiment, which performed the most precise measurement of the kaonic hydrogen 2p → 1s x-ray transition, the SIDDHARTA-2 setup is now fully equipped for the challenging kaonic deuterium measurement. In this paper, we present a comprehensive description of the SIDDHARTA-2 setup and of the first kaonic atoms measurements performed during the commissioning phase of the DAΦNE collider. We also outline a proposal for future measurements of kaonic atoms at DAΦNE beyond SIDDHARTA-2, which is intended to stimulate discussions within the broad scientific community performing research, directly or indirectly, related to this field. more...

KAMEO (Kaonic Atoms Measuring Nuclear Resonance Effects Ob-servables) is a proposal for an experiment aiming to perform the first consistent measurement of the E2 nuclear resonance effects in kaonic molybdenum A=94,96,98,100 isotopes. The E2 nuclear resonance mixes atomic states, due to the electrical quadrupole excitation of nuclear rotational states. It occurs in atoms having the energy of a nuclear excitation state closely matching an atomic de-excitation state energy, and affects the rates of X-ray atomic transitions matching the energy of the resonance. The measurement E2 nuclear resonance effect in KMO isotopes allows the study of the strong kaon-nucleus interaction in a rotational excited nuclear state. Moreover, the effect enables the K- to access an inner atomic level not easily reachable by the kaon normal cascade, due to the nuclear absorption. The KAMEO proposed apparatus consists of 4 enriched Mo A=94,96,98,100 isotope strips, exposed to the kaons produced by the DAφNE collider, for kaonic atoms formation, with a high-purity germanium detector, cooled with liquid nitrogen, used to measure the X-ray atomic transitions. The DAφNE collider is located at the National Laboratories of Frascati (LNF-INFN), in Italy. It is already suited for kaonic atoms measurement by the SIDDHARTA-2 collaboration. more...

Kaonic atom X-ray spectroscopy is a consolidated technique for investigations on the physics of strong kaon–nucleus/nucleon interaction. Several experiments have been conducted regarding the measurement of soft X-ray emission (20 keV) from intermediate kaonic atoms (carbon, aluminum, and sulfur). In this context, we investigated cadmium–zinc–telluride (CdZnTe or CZT) detectors, which have recently demonstrated high-resolution capabilities for hard X-ray and gamma-ray detection. A demonstrator prototype based on a new cadmium–zinc–telluride quasi-hemispherical detector and custom digital pulse processing electronics was developed. The detector covered a detection area of 1 cm2 with a single readout channel and interesting room-temperature performance with energy resolution of 4.4% (2.6 keV), 3% (3.7 keV), and 1.4% (9.3 keV) FWHM at 59.5, 122.1, and 662 keV, respectively. The results from X-ray measurements at the DAΦNE collider at the INFN National Laboratories of Frascati (Italy) are also presented with particular attention to the effects and rejection of electromagnetic and hadronic background. more...

Water scarcity is a major concern in agriculture worldwide. Fruit trees are severely affected by water deprivation in terms of growth, fruit yield, and quality. Plant monitoring combined with efficient irrigation is pivotal to achieve good quality standards and improve agricultural sustainability. This study reports the use of in vivo sensing technology to monitor fruit tree species continuously, in real time and in vivo, through an Organic Electrochemical Transistor (OECT)-based biosensor called Bioristor. The sensor was applied to grapevines, apples, and kiwis, revealing its capability to trace the plant water status for the whole productive cycle. A correlation between the sensor response index (R) and environmental parameters such as air humidity and temperature were recorded for fruit species. The day/night oscillation of the ionic content in the transpiration stream varies during plant growth and fruit maturation and during severe drought stress. Bioristor promptly detected the occurrence of drought stress. The gate current (Igs) trend supports the reduction in the saturation of the system due to the lower water availability. The use of Bioristor-acquired indices can be used to improve precision irrigation techniques according to the real plant needs. more...

The estimation of the characteristic parameters of the electrical contacts in CdZnTe and CdTe detectors is related to the identification of the main transport mechanisms dominating the currents. These investigations are typically approached by modelling the current–voltage (I–V) curves with the interfacial layer–thermionic-diffusion (ITD) theory, which incorporates the thermionic emission, diffusion and interfacial layer theories into a single theory. The implementation of the ITD model in measured I–V curves is a critical procedure, requiring dedicated simplifications, several best fitting parameters and the identification of the voltage range where each transport mechanism dominates. In this work, we will present a novel method allowing through a simple procedure the estimation of some characteristic parameters of the metal–semiconductor interface in CdZnTe and CdTe detectors. The barrier height and the effects of the interfacial layer will be evaluated through the application of a new function related to the differentiation of the experimental I–V curves. more...

The SIDDHARTA-2 collaboration has developed a novel X-ray detection system based on cadmium-zinc-telluride (CZT, CdZnTe), marking the first application of this technology at the DA Φ NE electron-positron collider at INFN-LNF. This work aims to demonstrate the stability of the detectors' performance in terms of linearity and resolution over short and long periods, thereby establishing their suitability for precise spectroscopic measurements within a collider environment. A reference calibration spectrum is presented in association with findings from assessments of linearity and resolution stability. Additionally, this study introduces a validated model of the response function of the detector. The relative deviations from the nominal values for the source transitions, obtained by fitting the entire spectrum with a background function and the previously introduced response function, are reported. Finally, a comparison of the calibration performance with and without beams circulating in the collider's rings is presented. These promising results pave the way for applying CZT detectors in kaonic atom studies and, more generally, in particle and nuclear physics spectroscopy. [ABSTRACT FROM AUTHOR] more...

The article describes: growth phenotypes of the four plant species (Noccaea caerulescens, Thlaspi perfoliatum, Arabidopsis halleri, Arabidopsis thaliana) before and after the treatment with ionic and nanoscale Zn and Cd (Fig. 1); the method of synthesis and characterization of ZnS QDs and CdS QDs (Fig. 2); the genetic characterization (performed with molecular markers) of the four plant species, their relative genecological relation (Fig. 3); a conceptual workflow designed to detect the amount of ionic Zn and Cd in the original solution/suspension used for the treatment (Fig. 4); the determination of Zn and Cd in the treatment soils after 30 days from supplement of ionic and nanoscale Zn and Cd (Fig. 5); the effect of the treatment on root elongation (Fig. 6); a workflow of a novel analytical method designed to detect the ionic and nanoscale Zn and Cd in the plant tissues after digestion with three different methods (Fig. 7); a reconstruction experiments with an exsiccated powder of plant tissue spiked with the same amount of Zn in the ionic and nanoscale forms (Fig. 8); a TEM-EDX analysis on these powdered plant tissues after removal of all soluble (ionic) Zn to show the presence of Zn in a non soluble form (nanoscale) (Fig. 9); the calculation of Bioconcentration Factor (BCF) and Translocation Factor (TF) and their ratios (Table 1); all data of the “spiking” experiments (Tables 2 and 3). more...

Research on the effects of engineered nanomaterials (ENMs) on mitochondria, which represent one of the main actors in cell function, highlighted effects on ROS production, gametogenesis and organellar genome replication. Specifically, the mitochondrial effects of cadmium sulfide quantum dots (CdS QDs) exposure can be observed through the variation in enzymatic kinetics at the level of the respiratory chain and also by analyzing modifications of reagent and products in term of the bonds created and disrupted during the reactions through Fourier-transform infrared spectroscopy (FTIR). This study investigated both in intact cells and in isolated mitochondria to observe the response to CdS QDs treatment at the level of electron transport chain in the wild-type yeast Saccharomyces cerevisiae and in the deletion mutant Δtom5, whose function is implicated in nucleo–mitochondrial protein trafficking. The changes observed in wild type and Δtom5 strains in terms of an increase or decrease in enzymatic activity (ranging between 1 and 2 folds) also differed according to the genetic background of the strains and the respiratory chain functionality during the CdS QDs treatment performed. Results were confirmed by FTIR, where a clear difference between the QD effects in the wild type and in the mutant strain, Δtom5, was observed. The utilization of these genetic and biochemical approaches is instrumental to clarify the mitochondrial mechanisms implicated in response to these types of ENMs and to the stress response that follows the exposure. more...

Objective: Clear Cell Sarcoma (CCS) is a rare tumor of mesenchymal origin accounting for 1% of soft tissue sarcomas (STS)1. Often misdiagnosed as malignant melanoma2 (MM), it has only one curative treatment: radical surgery and an extensive postoperative follow-up program2. Herein, we present a case of CCS mimicking a right breast tumor, where the patient´s age, gender, growth and localization of the neoplasm render it uncommon. Case presentation: A 70-year-old male was admitted to the Surgery Department complaining about a 3-month right breast tumor. Ultrasound evidenced a nodular formation (2.29 cm-1.91 cm) and mammography showed a hyperdense image, projected 35 mm from the nipple, surrounded by calcifications. No signs of systemic disease were present. Core needle biopsy expressed histological characteristics compatible with both MM and CCS. Results: After multidisciplinary team meeting, a wide resection surgery was performed followed by lymphadenectomy. The immunohistochemistry and pathology report led to the diagnosis: CCS. Conclusions: CCS is a rare sarcoma with poor prognosis. This case is exceptional due to its epidemiology, unusual clinical manifestations and appearance, setting CCS up as a new differential diagnosis to keep in mind regarding breast tumors. Its extreme rarity could help other colleagues deal with this infrequent presentation. more...

Hyperaccumulator plant species growing on metal-rich soils can accumulate high quantity of metals and metalloids in aerial tissues, and several proteomic studies on the molecular mechanisms at the basis of metals resistance and hyperaccumulation have been published. Hyperaccumulator are also at the basis of the phytoremediation strategy to remove metals more efficiently from polluted soils or water. Arabidopsis halleri and Noccea caerulescens are both hyperaccumulators of metals and nano-metals. In this study, the change in some proteins in A. halleri and N. caerulescens was assessed after the growth in soil with cadmium and zinc, provided as sulphate salts (CdSO4 and ZnSO4) or sulfide quantum dots (CdS QDs and ZnS QDs). The protein extracts obtained from plants after 30 days of growth were analyzed by 2D-gel electrophoresis (2D SDS-PAGE) and identified by MALDI-TOF/TOF mass spectrometry. A bioinformatics analysis was carried out on quantitative protein differences between control and treated plants. In total, 43 proteins resulted in being significatively modulated in A. halleri, while 61 resulted in being modulated in N. caerulescens. Although these two plants are hyperaccumulator of both metals and nano-metals, at protein levels the mechanisms involved do not proceed in the same way, but at the end bring a similar physiological result. more...

In the last decades, nanotechnology-based tools have attracted attention in the scientific community, due to their potential applications in different areas from medicine to engineering, but several toxicological effects mediated by these advanced materials have been shown on the environment and human health. At present, the effects of engineered nanomaterials on gametogenesis have not yet been well understood. In the present study, we addressed this issue using the yeast Saccharomyces cerevisiae as a model eukaryote to evaluate the effects of cadmium sulfide quantum dots (CdS QDs) on sporulation, a process equivalent to gametogenesis in higher organisms. We have observed that CdS QDs cause a strong inhibition of spore development with the formation of aberrant, multinucleated cells. In line with these observations, treatment with CdS QDs down-regulates genes encoding crucial regulators of sporulation process, in particular, the transcription factor Ndt80 that coordinates different genes involved in progression through the meiosis and spore morphogenesis. Down-regulation of NDT80 mediated by CdS QDs causes a block of the meiotic cell cycle and a return to mitosis, leading to the formation of aberrant, multinucleated cells. These results indicate that CdS QDs inhibit gametogenesis in an irreversible manner, with adverse effects on cell-cycle progression. more...

High-flux X-ray measurements with high-energy resolution and high throughput require the mitigation of pile-up and dead time effects. The reduction of the time width of the shaped pulses is a key approach, taking into account the distortions from the ballistic deficit, non-linearity, and time instabilities. In this work, we will present the performance of cadmium–zinc–telluride (CdZnTe or CZT) pixel detectors equipped with digital shapers faster than the preamplifier peaking times (ballistic deficit pulse processing). The effects on energy resolution, throughput, energy-linearity, time stability, charge sharing, and pile-up are shown. The results highlight the absence of time instabilities and high-energy resolution ( more...

When applied in the same concentration to tomato plants, cadmium sulfate (CdSO4) and zinc sulfate (ZnSO4) were transported from soil to roots and from roots to shoots more readily than their nano counterparts: cadmium sulfide quantum dots (CdS QD) and zinc sulfide quantum dots (ZnS QD). Compared to the CdS QD, he higher rate of transport of CdSO4 resulted in a greater negative effect on growth, chlorophyll content, antioxidant properties, lipid peroxidation and activation of antioxidant defence systems. Although ZnSO4 was transported more rapidly than ZnS QD, the overall effect of Zn addition was positive (increase in total plant mass, stem length, antioxidant content and decrease in lipid peroxidation). However, these effects were more pronounced in the case of ZnS QD, suggesting that the mechanisms underpinning the activity of ZnS QD and ZnSO4 were different. Thus, the risk of phytotoxicity and food chain transfer of the two elements depended on their form (salt or nanoform), and consequently their effects on plants' growth and physiology were different. This work elucidates the mechanisms underlying the responses of CdS QD and ZnS QD in contrast to those of their corresponding salts on tomato plants. Our results showed that faster transport from roots to leaves in the case of salts in respect to the nanoform augment their detrimental impact on tomato's antioxidant properties and growth and make the nanoform of both a better alternative for crop application either as fertilizers or as pesticides. [ABSTRACT FROM AUTHOR] more...

This manuscript reports the application of sensors for water use efficiency with a focus on the application of an in vivo OECT biosensor. In two distinct experimental trials, the in vivo sensor bioristor was applied in yellow kiwi plants to monitor, in real-time and continuously, the changes in the composition and concentration of the plant sap in an open field during plant growth and development. The bioristor response and physiological data, together with other fruit sensor monitoring data, were acquired and combined in both trials, giving a complete picture of the biosphere conditions. A high correlation was observed between the bioristor index (ΔIgs), the canopy cover expressed as the fraction of intercepted PAR (fi_PAR), and the soil water content (SWC). In addition, the bioristor was confirmed to be a good proxy for the occurrence of drought in kiwi plants; in fact, a period of drought stress was identified within the month of July. A novelty of the bioristor measurements was their ability to detect in advance the occurrence of defoliation, thereby reducing yield and quality losses. A plant-based irrigation protocol can be achieved and tailored based on real plant needs, increasing water use sustainability and preserving high-quality standards. [ABSTRACT FROM AUTHOR] more...

While several studies have explored strategic communication in relation to military intervention, this study analyses communicative strategies in the context of military withdrawals and redeployments. We focus on the case study of the United States withdrawal from Afghanistan to analyse which (and how) strategic narratives were discursively mobilised by the US administration on Twitter (now known as X) to seek public support and legitimacy for its operations. Findings suggest that key narratives of securitisation, national interest and responsibility were deployed through macro strategies of transcendence, bolstering, blaming and mitigation. We claim that while early representations of the war in Afghanistan were depicted as an unavoidable mission, the overarching discourse has now shifted to portrayals of the war being unsustainable and no longer needed by the United States. [ABSTRACT FROM AUTHOR] more...