Search

AbstractIn this report we present a simple synthesis of a nickel-based metal organic framework (MOF-Ni) at the room temperature using a solution of dimethylformamide (DMF), ethanol and distilled water. The MOF-Ni synthesized in various solvents displayed numerous different properties and advantages over other materials including easy synthesis procedure, good crystallinity, rigidity, and robust chemical stability. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermal gravimetric analysis (TGA) were employed to analyze the as-synthesized MOF-Ni. The as-obtained MOF-Ni was used to investigate its adsorption kinetics of red telon dye (RTL) molecules. The effects of time (30–270 min), initial RTL concentration (20–300 mg/L), adsorbent dose (2–50 mg), solution pH (2–12), and temperature (10–80 °C) were investigated. The pseudo-first order rate equation was able to provide the best description of the adsorption kinetics data in the studied time scale. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms, and the isotherm constants were also determined. Dye adsorption turned out to strongly depend on pH, and a low pH was found to increase the amount of adsorbed dyestuff. Compared with other samples, MOF-Ni synthesized in (DMF ​+ ​C2H5OH ​+ ​H2O) had a significantly enhanced adsorption ability for RTL dye. The MOF-Ni high adsorption capacity for RTL dye was attributed to the electrostatic attraction/repulsion phenomena. Moreover, MOF-Ni showed an improved stability at 370, 417, and 423 °C temperatures. The results obtained through our experiments suggested that our porous MOF-Ni microstructures synthesized in DMF ​+ ​C2H5OH ​+ ​H2O have potential applications for treating wastewaters containing RTL dyes. [ABSTRACT FROM AUTHOR]

In 1540, in Ingolstadt, Germany, the influential astronomer and printer Peter Apian produced the Astronomicum Caesareum: a printed and hand-coloured astronomical book visualising the Ptolemaic universe through the use of diagrams and wheelcharts, worthy of his imperial patron, Charles V. About 130 copies have survived to this day, with varying degrees of paper quality and level of decoration, and only eleven volumes are considered deluxe copies. We thoroughly analysed one deluxe volume held at the Fitzwilliam Museum, Cambridge, and compared the results with four (one deluxe and three standard) other copies from institutions in the UK. A non-invasive analytical protocol was applied, including extensive microscopy, fibre-optic reflectance spectroscopy (FORS), X-ray spectroscopy (XRF), macroscale XRF (MA-XRF) and Raman spectroscopy. The most interesting pages were chosen based on art-historical evidence and the variety of the colour palette, including on volvelles (wheelcharts) and coats of arms. Following a systematic approach, we analysed the same pages in each volume, gathering information on the colour palette in all the volumes. The type of paper and the presence of watermarks were also documented. A wide range of materials was identified in the five copies, including red, purple and yellow organic dyes, lead white, verdigris, vermilion, azurite, indigo, smalt, and lead–tin yellow. Mosaic gold was used to embellish certain paint passages in the deluxe volumes and metals (gold and silver) were applied on some pages. The comprehensive findings were essential to identify specific traits related to Apian's workshop, to differentiate deluxe from standard copies, to suggest an order of production of the copies, and to provide new information on this landmark book and more generally in an under-researched field of study. [ABSTRACT FROM AUTHOR]

Herein, a Bi2S3/Cu2S was successfully synthesized via a simple one-step wet impregnation process. The compositional behavior and electrical and optical properties of photocatalysts were investigated in detail. Photocatalytic technology has shown great promise in wastewater treatment, splitting water to hydrogen, and converting CO2 to fuel. Researchers or scientist are attempting to design sulfate-based heterojunction photocatalytic systems in order to develop novel photocatalysts with excellent performance. Photodegradation of methylene blue (MB) dye and tetracycline (TC) drug under visible light irradiation was used to assess the photocatalytic activity of as-prepared samples. As a result, 2:1% wt of Bi2S3/Cu2S heterostructure composite revealed superior visible light degradation performing of MB dye, and TC drug efficiency as 90.2% and 87.5%, respectively. The prepared hybrid photocatalyst has demonstated a potential for use in the photocatalytic degradation of antibiotic durgs and dyes, indicating a promissing future for its application. [ABSTRACT FROM AUTHOR]

Together with the rapid growth of technology, the discharge of wastewater from industry into environment had become a hot topic among society nowadays. More attention had been given to the development of water treatment techniques. In this study, sonocatalysis was proposed to degrade the organic pollutants using silver-doped zinc oxide (Ag-ZnO) nanoparticles which were synthesized via green synthesis process using Clitoria ternatea Linn (Asian Pigeonwings flower). The characterization results revealed that the incorporation of Ag into the ZnO lattice decreased the crystallite size and increased the specific surface area of ZnO nanoparticles. It is noteworthy that about 98% of sonocatalytic degradation efficiency of malachite green (MG) was successfully achieved within 30 min in the presence of 5 wt.% Ag-ZnO with 1.0 g/L of catalyst loading under 500 mg/L of initial dye concentration, 80 W of ultrasonic power, 45 kHz of ultrasound frequency, and 2.0 mM of oxidant concentration. The kinetic study showed that the sonocatalytic degradation of organic dye was fitted well into second-order kinetic model with high R2 value (0.9531). In the thermodynamic study, negative value of standard Gibbs free energy and low value of activation energy (+ 24.43 kJ/mol) were obtained in the sonocatalytic degradation of MG using the green-synthesized Ag-ZnO sample. Highlights: • Facile synthesis of silver-doped zinc oxide nanoparticles using plant extract which act as reducing and stabilizing agents • Optical, physical, and chemical characterization of green-synthesized nanomaterials were performed • Evaluation of sonocatalytic degradation of organic dye using green-synthesized nanomaterials • Sonocatalytic behavior, kinetic and thermodynamic studies of sonocatalytic reaction [ABSTRACT FROM AUTHOR]

In this study, we present a one‐pot synthetic approach for the preparation of metal oxide nanocomposites. Our investigation combines various analytical techniques, including FTIR, XRD, UV‐vis DRS, PL, XPS, SEM, EDX, and XANES, to comprehensively identify heterogeneous structures: SnO2‐CuO, CuO‐SnO2, NiO‐TiO2, and TiO2‐NiO. These metal oxide‐linked semiconductor solids serve as catalysts for dye photodegradation and exhibit remarkable biological activity. Our research is centered on exploring the photocatalytic potential of SnO2‐CuO nanocomposites while emphasizing the optimization of their photocatalytic and biological activities. This optimization is achieved through the careful incorporation of an ideal quantity of SnO2, as confirmed by EDX data, which reveals the composition as follows: O: 78.58 weight percent (0.525 keV), Cu: 12.61 weight percent (0.954 keV), and Sn: 8.81 weight percent (0.400 keV). Notably, under direct sunlight irradiation, the degradation efficiency of Rhodamine B dye surpasses that of pristine CuO, SnO2, TiO2, and NiO nanoparticles. Additionally, we explore the antimicrobial properties of these prepared samples at varying concentrations (50, 100, and 150 μl) against the pathogenic bacterium Staphylococcus aureus. Our findings highlight their effectiveness as antimicrobial agents. This research offers a promising method for developing highly active metal‐oxide‐linked nanomaterials, suitable for efficiently removing organic dye contaminants from water systems and showing great potential in antimicrobial applications. [ABSTRACT FROM AUTHOR]

Rapid industrialization and ever-growing human activities have caused more and more serious water pollution in the last few decades, posing great threats towards both human health and ecological environment. Organic dyes, as one of the major water pollutants, are usually toxic, chemically stable, and hard to degrade. In this paper, a novel PCN-222(Zn)/GO composite was obtained by combining porphyrin-based metal organic framework material PCN-222(Zn) with graphene oxide (GO). The structure and morphology of the composite were characterized by FTIR, XRD, SEM, and optical microscopy. The thermal stability and optical properties were studied by thermogravimetric analysis (TGA) and fluorescence spectroscopy. PCN-222(Zn) and PCN-222(Zn)/GO were used as both adsorbents and photocatalysts for the adsorption and visible light photodegradation of organic dye methylene blue in aqueous solutions. It is found that the blending of GO can improve the photocatalytic degradation activity of PCN-222(Zn) towards organic dyes. [ABSTRACT FROM AUTHOR]

The release of industrial effluents into fresh water is a major contributor of water contamination. Therefore, it is highly desirable to develop a viable solution to this alarming issue to improve the quality of clean water. To enhance the photocatalytic efficiency and hence utilization ratio of CuO, a series of CuO–FeSe2 composites with different varying contents of FeSe2 were prepared through facile synthetic methods. X-ray diffraction (XRD) and energy-dispersive X-rays (EDX) analysis verified that the samples were successfully prepared without any contaminating phases. The average crystallite sizes of CuO and FeSe2 were computed to be 29 and 21 nm respectively. For the CuO–FeSe2 composites, the crystallite sizes varied between 25 and 27 nm. The morphology of CuO was comprised of needle-shaped structures, whereas that of FeSe2 was observed to be flower-shaped structures comprising of irregular crystals. A red shift in the bandgap of CuO–FeSe2 composites was observed with the increase in FeSe2 concentration. The prepared photocatalysts were utilized to evaluate their efficiency under visible light against Rhodamine B (RhB). Among all the prepared composites, CuO–75% FeSe2 revealed a remarkable performance and degraded 96% RhB in 180 min. Rate constants for the degradation of the dye were determined by applying the Langmuir–Hinshelwood model. [ABSTRACT FROM AUTHOR]

The combined application of Cathodoluminescence (CL) with Scanning Electron Microscopy (SEM) on paintings and painted surfaces has the potential to identify both organic and inorganic pigments on a micrometre or even nanometre scale. Additionally, the combination with Energy-Dispersive Spectrometry (EDS) allows for a more holistic, elemental, and mineralogical characterization of pigments. In addressing the need for the creation of a robust, open access database of characteristic CL spectra of pigments, a large project has been undertaken, focusing primarily on common organic and inorganic pigments. The present paper focuses on the CL characterization of 10 significant blue pigments in pure powder form: cerulean blue, Egyptian blue, Han blue, indigo, lapis lazuli, Maya blue, phthalo blue, vivianite, ultramarine blue, and zirconium blue. The CL spectra present characteristic bands for most of the pigments, allowing their secure identification, especially when combining the results with the EDS analyses. The effect of binding media and of the mixture of different pigments was also studied, via the analysis of mixtures of pigments with oil painted over canvas. Overall, both the binding medium and the mixture of pigments do not appear to create significant differences in the occurring spectra, thus allowing the identification of individual pigments. EDS and RAMAN spectra are included in order to facilitate comparison with other databases. [ABSTRACT FROM AUTHOR]

According to the theoretical model based on the Mueller matrix approach, the experimental electronic circular dichroism (ECD) for thin films of chiral organic dyes can be expressed as the sum of several contributions, two of which are the most significant: 1) an intrinsic component (CDiso) invariant upon sample orientation, reflecting the molecular and/or supramolecular chirality, due to 3D‐chiral nanoscopic structures; 2) a non‐reciprocal component (LDLB) which inverts its sign upon sample flipping, which arises from the interaction of linear dichroism and linear birefringence in locally anisotropic domains, expression of 2D‐chiral micro/mesoscopic structures. In this work, we followed in parallel through ECD and differential scanning calorimetry (DSC) the temperature evolution of the supramolecular arrangements of thin films of five structurally related chiral thiophene‐based oligomers with different LDLB/CDiso ratio. By increasing the temperature, regardless of phase transitions observed by DSC analysis, systems with strong CDiso revealed no changes in the ECD spectrum, while compounds with dominant LDLB contribution underwent a gradual (and reversible) reduction of (apparent) ECD signals. These findings demonstrated that the concomitant occurrence of intrinsic and non‐reciprocal components in the ECD spectrum of thin films of chiral organic dyes is strictly correlated with solid‐state organizations of different stability. [ABSTRACT FROM AUTHOR]

Azo compounds find use in many areas of science, displaying crucial properties for important applications as photoconductive organic pigments, fluorescent quenchers, paints, cosmetics, inks, and in the large and valuable dye industry. Due to the unstable intermediates, and the exothermic and fast reactions used in their synthesis, high value azo compounds are excellent candidates for continuous flow manufacturing. This comprehensive review covers the progress made to date on developing continuous flow systems for azo synthesis and reflects on the main challenges still to be addressed, including scale up, conversion, product purity, and environmental impact. The further development of integrated continuous flow processes has the potential to help tackle these challenges and deliver improved methods for azo compound generation. [ABSTRACT FROM AUTHOR]

The continuous discharge of organic dyes into freshwater resources poses a long-term hazard to aquatic life. The advanced oxidation Fenton process is a combo of adsorption and degradation of pollutants to detoxify toxic effluents, such as anti-bacterial drugs, antibiotics, and organic dyes. In this work, an activated attapulgite clay-loaded iron-oxide (A-ATP@Fe3O4) was produced using a two-step reaction, in which attapulgite serves as an enrichment matrix and Fe3O4 functions as the active degrading component. The maximum adsorption capacity (qt) was determined by assessing the effect of temperature, pH H2O2, and adsorbent. The results showed that the A-ATP@Fe3O4 achieves the highest removal rate of 99.6% under optimum conditions: 40 °C, pH = 3, H2O2 25 mM, and 0.1 g dosage of the composite. The dye removal procedure achieved adsorption and degradation equilibrium in 120 and 30 min, respectively, by following the same processes as the advanced oxidation approach. Catalytic activity, kinetics, and specified surface characteristics suggest that A-ATP@Fe3O4 is one of the most promising candidates for advanced oxidation-enrooted removal of organic dyes. [ABSTRACT FROM AUTHOR]

Organic dyes can inflict environmental harm and pose risks to human health, thereby presenting challenges in their treatment within industrial wastewater. Currently, numerous research groups have conducted investigations on the adsorption of organic dyes in industrial wastewater. Herein, this work focuses on the selective adsorption approach towards dyes molecules based on an Anderson-type polyoxometalate (noted as POM-1) as potential adsorbent, which has been functionalized with organic ligands to enhance its negative charge. Adsorption experiments revealed that POM-1 displayed efficient adsorption capabilities towards the cationic dye methyl blue with almost complete adsorption within 25 min, and the adsorption rate was calculated as 98%. A rapid and consecutive filtering experiments have also been performed and further proved the excellent adsorption behavior of POM-1 towards MB. [ABSTRACT FROM AUTHOR]

A concise and efficient synthetic protocol for the synthesis of furan-based bis-stilbene derivatives (BPBFCz1) was described, which is a very promising organic laser dye. Starting with 4,4'-diethynylbiphenyl, BPBFCz1 was prepared with a total yield of 40% through a three-step classical reaction of Sonogashira Coupling, intramolecular cyclization of 2-alkynyl phenol, and Buchwald Hartwig cross-coupling. The crystal structure of BPBFCz1 was presented for the first time. The synthesis strategy was applied to the synthesis of other three materials with similar structure and the yields of 28.6–36.6% were obtained. [ABSTRACT FROM AUTHOR]

This work presents a comprehensive investigation of novel organic dyes MD‐1‐2 as active acid and base co‐sensitizers in dye‐sensitized solar cells (DSSCs), using well‐known Ru(II)‐based N3 dyes. These co‐sensitizers contain a triphenylamine ring as a donor scaffold linked with an electron‐withdrawing cyanopyridyl and cyano benzoic acid acceptor for MD‐1‐2. In this study, we demonstrated the significant impact of base dyes with pyridine anchoring units on the photovoltaic parameters of N3‐sensitized devices. This methodology takes advantage of the ability of carboxyl and pyridyl moieties to interact with the Brønsted acid and Lewis acid sites on TiO2 surfaces, respectively. By reducing competition between dyes for surface binding, dye packing density on the TiO2 is enhanced while electron recombination is minimized, leading to higher photovoltage. Furthermore, the influence of varying sensitizer/co‐sensitizer ratios was comprehensively studied. Outcomes showed devices made using co‐sensitizer MD‐1‐2 with sensitizer N3 at all relative concentrations surpassed those with only N3. Importantly, the co‐sensitized devices that were made utilizing 0.3 mM acid–base MD‐1 and N3 sensitizer had the greatest solar energy capacity. It had a power conversion efficiency of 10.35%, a short‐circuit current density of 20.01 mA·cm−2, and an open‐circuit voltage of 752 mV. The results provide fresh insight into optimizing devices to create DSSCs with improved efficiency by choosing acceptable co‐sensitizers at suitable concentrations. [ABSTRACT FROM AUTHOR]

Magnetic separation of photocatalysts holds great promise for water treatment. A magnetic separation method has a positive effect on the recovery of catalysts after degradation. In this paper, an efficient and reusable catalytic system is developed based on coating magnetic Fe3O4 by depositing Fe2+ on the surface of ZnO. The Fe3O4/ZnO nanocomposite exhibits enhanced performance for organic pollutant degradation. The Fe3O4/ZnO system demonstrates a high photocatalytic activity of 100% degradation efficiency in Rhodamine B (RhB) degradation under UV light irradiation for 50 min. The excellent photocatalytic activity is primarily due to the separation of photogenerated electron-hole pairs being facilitated by the strong interaction between Fe3O4 and ZnO. The induction of the magnetic Fe3O4 endows the Fe3O4/ZnO composite with superior magnetic separation capability from water. Experiments with different radical scavengers revealed that the hydroxyl radical (·OH) is the key reactive radical for the effective degradation of RhB. This work innovatively affords a common interfacial dopant deposition strategy for catalytic application in the degradation of organic dye pollutants and catalyst separation from wastewater efficiently. [ABSTRACT FROM AUTHOR]

Advanced oxidation processes, including photocatalysis, have been proven effective at organic dye degradation. Tailored porous materials with regulated pore size, shape, and morphology offer a sustainable solution to the water pollution problem by acting as support materials to grafted photocatalytic nanoparticles (NPs). This research investigated the influence of pore and particle sizes of photocatalytic MICROSCAFS® on the degradation of methyl orange (MO) in aqueous solution (10 mg/L). Photocatalytic MICROSCAFS® are made of binder-less supported P25 TiO2 NPs within MICROSCAFS®, which are silica–titania microspheres with a controlled size and interconnected macroporosity, synthesized by an adapted sol–gel method that involves a polymerization-induced phase separation process. Photocatalytic experiments were performed both in batch and flow reactors, with this latter one targeting a proof of concept for continuous transformation processes and real-life conditions. Photocatalytic degradation of 87% in 2 h (batch) was achieved, using a calibrated solar light simulator (1 sun) and a photocatalyst/pollutant mass ratio of 23. This study introduces a novel flow kinetic model which provides the modeling and simulation of the photocatalytic MICROSCAFS® performance. A scavenger study was performed, enabling an in-depth mechanistic understanding. Finally, the transformation products resulting from the MO photocatalytic degradation were elucidated by high-resolution mass spectrometry experiments and subjected to an in silico toxicity assessment. [ABSTRACT FROM AUTHOR]

Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed as a sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p–n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2 mA/cm2, demonstrating three times increase compared with the photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2 ng/mL to 10 μg/mL with an ultrasensitive detection limit of 0.2 ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes. [ABSTRACT FROM AUTHOR]

Water contamination caused by textile dyes can affect human health, calling for effective treatment method. Here, we report the preparation of MgFe2O4/C composite through hydrothermal method to adsorb three dyes including rhodamine B, methyl orange (MO) and acid yellow 17 (AY) in water. MgFe2O4/C obtained a surface area of 692.32 m2/g and MgFe2O4 particles were well-dispersed on porous carbon matrix. Taguchi experimental design (L16) was conducted to test the effect of four factors, including initial concentration, adsorbent dosage, contact time and pH at different four levels. pH was a first-ranked factor for adsorption of all three dyes with the highest contribution between 33.20 and 55.61%. The highest capacity (158.12 mg/g) was determined for MO dye adsorption under a concentration of 40 mg/L, pH 3, a dose of 0.05 g/L, and a duration of 240 min. The experiments of MgFe2O4/C reusability were performed, reaching at least fourth cycles offering potential for reuse. It is recommended that Taguchi orthogonal array design can be well adopted to reach the best condition of organic dyes adsorption by MgFe2O4/C composite. [ABSTRACT FROM AUTHOR]

Dyes can be determined as a substance that creates many environmental issues leading to the death of aquatic life, plants and all living organisms. Dye removal can be done by several physical, chemical and biological methods, including the photocatalytic method. Photocatalysis is a method in which light energy is used to degrade the dye. This technique is low-cost and eco-friendly, and it degrades many harmful substances from organic dyes compared to other techniques. The prime aim of the present work is to degrade the largely used organic dyes such as methylene blue, malachite green and crystal violet using EDTA-doped FeZnS2 and Leishman stain-doped FeZnS2 thin films. The doped FeZnS2 thin films were fabricated using the co-precipitation method. Thin fabricated films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and UV–Visible spectroscopy (UV). These characterization studies show an active photo response indicating effective dye degradation. Based on the absorption studies of UV spectroscopy measurements after 60 min, the degradation efficiency of methylene blue, crystal violet and malachite green using EDTA-doped FeZnS2 are 76, 85 and 90, respectively. Similarly, the degradation efficiency after 60 min of methylene blue, crystal violet and malachite green using Leishman stain-doped FeZnS2 are 82, 79 and 89, respectively. [ABSTRACT FROM AUTHOR]

This study describes the impact of surfactant molecular weights (PEG 2000 and PEG 4000) on the photocatalytic activity of TiO2 films, deposited via dip-coating from a PEG-stabilized suspension and silver-functionalized photo-fixation of Ag+ under UV illumination. The photocatalytic activity of pure and Ag/TiO2 films is assessed in the aqueous-phase degradation of Malachite green and Methylene blue in distilled and tap water under UV and visible illumination. The results indicate a positive effect of both the higher-molecular-weight non-ionic surfactant and Ag-functionalization yield higher photocatalytic efficiency. Notably, films photo-fixed with 10−2 M Ag+ show the highest degradation percentages in all experimental conditions. A direct correlation between the concentration of Ag+ ions and the enhancement of the photocatalytic activity is revealed: pure TiO2 < Ag, 10−4/TiO2 < Ag, 10−3/TiO2 < Ag, 10−2/TiO2. Flame atomic absorption spectrometry is used to study the Ag+ leeching from the Ag/TiO2 films. The structural properties of the nanostructures are investigated through scanning electron microscopy, Brunauer–Emmett–Teller analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Additionally, after three cycles of operation, Ag, 10−2/TiO2 (PEG 4000) films can maintain their photocatalytic activity, suggesting a potential application in the treatment of dye wastewater. [ABSTRACT FROM AUTHOR]

This study explores the use of Halloysite NanoTubes (HNTs) as photocatalysts capable of decomposing organic dyes under exposure to visible or ultraviolet light. Through a systematic series of photocatalytic experiments, we unveil that the photodegradation of Rhodamine B, used as a model cationic dye, is significantly accelerated in the presence of HNTs. We observe that the extent of RhB photocatalytic degradation in 100 min in the presence of the HNTs is ~four times higher compared to that of bare RhB. Moreover, under optimized conditions, the as-extracted photodegradation rate of RhB (~0.0022 min−1) is comparable to that of the previously reported work on the photodegradation of RhB in the presence of tubular nanostructures. A parallel effect is observed for anionic Coumarin photodegradation, albeit less efficiently. Our analysis attributes this discrepancy to the distinct charge states of the two dyes, influencing their attachment sites on HNTs. Cationic Rhodamine B molecules preferentially attach to the outer surface of HNTs, while anionic Coumarin molecules tend to attach to the inner surface. By leveraging the unique properties of HNTs, a family of naturally occurring nanotube structures, this research offers valuable insights for optimizing photocatalytic systems in the pursuit of effective and eco-friendly solutions for environmental remediation. [ABSTRACT FROM AUTHOR]

Water pollutants of non-biodegradable toxic aromatic dye including Methylene blue (MB) and Rhodamine (RhB) are extremely carcinogenic thiazines used in various industries such as leather industry, paper industry, and the dyeing industry. The presence of dyes in wastewater causes severe threats to human health that are responsible for various harmful chronic or acute diseases and also shows an adverse impact on the environment as it reduces transparency and is harmful to water microorganisms. To overcome severe issues, many traditional techniques have been used to remove toxic pollutants, but these methods are insufficient to remove chemically stable dyes that remain in the treated wastewater. However, the photocatalytic degradation process is an efficient approach to degrade the dye up to the maximum extent with improved efficiency. Therefore, in this work, a new class of two-dimensional (2D) transition metal carbide of Titanium Carbide (Ti3C2Tx) MXene material was used for the organic dyes degradation such as MB and RhB using a photocatalytic process. A layered structure of hexagonal lattice symmetry of Ti3C2Tx MXene was successfully synthesized from the Titanium Aluminum Carbide of Ti3AlC2 bulk phase using an exfoliation process. Further, the XRD spectrum confirms the transformation of bulk MAX phase having (002) plane at 9.2° to Ti3C2Tx MXene of (002) plane at 8.88° confirms the successful removal of Al layer from MAX phase. A smooth, transparent, thin sheet-like morphology of Ti3C2Tx nanosheet size were found to be in the range of 70 to 150 nm evaluated from TEM images. Also, no holes or damages in the thin sheets were found after the treatment with strong hydrofluoric acid confirms the formation Ti3C2Tx layered sheets. The synthesized Ti3C2Tx MXene possesses excellent photocatalytic activity for the degradation of dyes MB, RhB, and mixtures of MB and RhB dyes. MB dye degraded with a degradation percentage efficiency of 99.32% in 30 min, while RhB dye was degraded upto 98.9% in 30 min. Also, experiments were conducted for degradation of mixture of MB and RhB dyes by UV light, and the degradation percentage efficiency were found to be 98.9% and 99.75% for mixture of MB and RhB dye in 45 min, respectively. Moreover, reaction rate constant (k) was determined for each dye of MB, RhB, and mixtures of MB and RhB and was found to be 0.0215 min−1 and 0.0058 min−1, and for mixtures, it was 0.0020 min−1 and 0.009 min−1, respectively. [ABSTRACT FROM AUTHOR]

This research investigates the synthesis of sodium alginate–iron oxide nanocomposites (SAL-Fe3O4) through the co-precipitation method, with a focus on the impact of gelation time. SAL-Fe3O4 nanocomposites were precipitated from Fe2(SO4)3 and FeSO4 under an alkaline medium in the presence of sodium alginate, maintaining a stoichiometric balance using a molar ratio of 1:2 for iron (III) Fe3+ to iron (II) Fe2+ ions precursors. Two types of SAL-Fe3O4 nanocomposites were prepared by varying the gelation time of sodium alginate to 3 and 24 h. Extensive characterization was performed using UV, FTIR, XRD and SEM with EDX analysis techniques to evaluate the properties of the nanocomposites. Fourier-Transformed infrared Spectroscopy (FTIR) analysis provided insights into the presence of sodium alginate on the SAL-Fe3O4 nanocomposite surface and the bonding characteristics within the polymer. X-ray diffraction (XRD) analysis was employed to determine lattices, phases, and preferred crystal orientations (texture) of the nanocomposites. Scanning Electron Microscope (SEM) was utilized to examine morphology, microstructures, dimensions, and size of the prepared nanocomposites. Energy-Dispersive X-ray (EDX) was used for the analysis of the elemental composition of the nanocomposites. Additionally, the catalytic efficiency of SAL-Fe3O4 nanocomposites was evaluated through the catalytic degradation of organic dyes using hydrogen peroxide (H2O2) as the oxidizing agent. The degradation processes were monitored by UV-visible spectrophotometry and the apparent rate constant (kapp), degradation time, percentage (%) degradation, degradation concentration and half-life values of different organic dyes were studied and compared, highlighting the influence of gelation time on the degradation efficiency. [ABSTRACT FROM AUTHOR]

This study focuses on the synthesis of BaPbFe2O6 and modifying its photocatalytic activity by precipitation method on brilliant green (BG) dye. According to the characterization data, the UV-Vis absorption spectrum shows several peaks with an optical band gap of 5.45 eV. FESEM images showed irregular shapes of BaPbFe2O6 and EDX confirmed the presence of, Ba, Pb, Fe and O elements. The average particle size measured with maximum diffraction peak using Scherrer's equation was 12.31nm. XPS represents the different oxidation states of the elements. FTIR images show the presence of oxide film on the surface with a band gap of 500-600 cm-1 given as the characteristic stretched band of Pb-O. Maximum degradation is shown on the above optimum condition and complete degradation was held in 20 min on optimum conditions. The degradation rate of BaPbFe2O6 is 86.89% of 4*10-5 M for BG dye by exposing to sunlight for 20 minutes. Degradation of BG dye occurs due to the formation of hydroxyl radicals (.OH) on exposure to sunlight following pseudo first order kinetics. Therefore, BaPbFe2O6 synthesized in this paper can be used for the degradation of other exogenous organisms and for the treatment of wastewater and environmental polluted samples. [ABSTRACT FROM AUTHOR]

Organic dye pollutants are the most common type of pollutant found in water and wastewater as a result of various industrial activities. In particular, one of the largest contributors is the textile industry, which uses a lot of organic dyes to produce its goods. Organic dyes that remain in the effluents are typically permanent and difficult to detoxify using traditional wastewater treatment strategies. Photocatalysis using semiconductors have emerged as an attractive wastewater treatment method for resolving the major drawbacks of traditional methods. Montmorillonite has been presented as a conceivable dye adsorbent. When a semiconductor is incorporated, its adsorptive capability assists in imposing heterogeneous photoactivity. It is widely employed in a variety of applications due to fundamental characteristics such as high flexibility, swelling, ion exchange ability, acidity, usage in catalytic amounts, milder reaction conditions, benefit in reusability, selectivity, high yield, cheap cost, and so on. In this review, we specifically describe the last 3 years' development of dye degradation employing recently developed montmorillonite (MMT)‐based materials, as well as their preparation methods. In addition, the photocatalytic degradation of various types of organic dye pollutants, such as anionic and cationic dyes, was also studied in this review. The findings reveal that MMT‐based materials have a wide range of applications in the photocatalytic degradation of contaminants existing in the environment. [ABSTRACT FROM AUTHOR]

The addition of PnBu3 to o-substituted dianiline squaraine dyes leads to bench stable ylides. Exposure to a metal analyte in solution, results in PIII abstraction and rapid disruption of the ylide conjugation to promote reversion back to the squaraine dye giving an immediate turn-on colorimetric response. The stoichiometric sensitivity and accessibility of these chemodosimeters constitute effective organic dyes for trace transition metal detection. [ABSTRACT FROM AUTHOR]

Borophene is an emerging two-dimensional material exhibiting exceptional piezocatalytic activity under the influence of ultrasonic vibrations, as exemplified herein by the decomposition of highly stable organic dyes in water. After 6 minutes of exposure, borophene sheets converted up to 92 percent of a mixture of dye molecules at room temperature. [ABSTRACT FROM AUTHOR]

Although second near‐infrared (NIR‐II, 1000–1500 nm) light has attracted considerable attention, especially for life sciences applications, the development of organic dyes with NIR‐II absorption remains a formidable challenge. Herein we report the design, synthesis, and electronic properties of 20π‐electron antiaromatic benziphthalocyanines (BPcs) that exhibit intense absorption bands in the NIR region. The strong, low‐energy absorption of the antiaromatic BPcs is attributed to electric‐dipole‐allowed HOMO‐LUMO transitions with narrow band gaps, enabled by the reduced structural symmetry of BPc compared with regular porphyrins and phthalocyanines. The combination of peripheral substituents and a central metal decreases the HOMO‐LUMO energy gaps, leading to the extension of the absorption bands into the NIR‐II region (reaching 1100 nm) under reductive conditions. [ABSTRACT FROM AUTHOR]

This article reports on the synthesis of an innovative smart polymer, P5‐QPDMAEMA, opportunely developed with the aim of combining the responsiveness of PDMAEMA polymer and the host‐guest properties of covalently linked pillar[5]arenes. Thanks to a traditional Non‐Induced Phase Separation (NIPS) process performed at various coagulation pH, the blending of P5‐QPDMAEMA with polyethersulfone gave rise to the formation of functional beads for the removal of organic dyes in water. Adsorption tests are carried out on all the produced blend‐based beads by employing two representative dyes, the cationic methylene blue (MB), and the anionic methyl orange (MO). In particular, the P5‐QPDMAEMA based beads, prepared at acidic pH, featured the best MO removal rate (i. e., 91.3 % after 150 minutes starting from a 20 mg ⋅ L−1 solution) and a high selectivity towards the removal of the selected anionic dye. Based on the adsorption kinetics and isotherm calculations, the pseudo‐first order and Freundlich models were shown to be the most suitable to describe the MO adsorption behavior, achieving a maximum adsorption capacity of 21.54 mg ⋅ g−1. Furthermore, zwitterionic beads are obtained by a post‐functionalization of the PDMAEMA and the P5‐QPDMAEMA based beads, to test their removal capability towards both anionic and cationic dyes, as shown. [ABSTRACT FROM AUTHOR]

Toxic organic dyes (colorants) are one of the main causes of water pollution that releases destructive effluents in the environment. To overcome this issue, a fundamental need to produce a novel, efficient catalyst for the degradation and mineralization of dye mixtures has arisen. The objective of this research is to develop an eminent Ni-doped magnetic carbon aerogel (Ni-MCA) catalyst using graft co-polymerization method having xanthan gum as backbone doped with Ni-magnetic nanoparticles (Ni-MNPs), that do not show agglomeration and easy to separate. The examination revealed that Ni-MCA provided exceptional magnetic characteristics (Ms = 52.75 emu/g) and potent catalytic activity for the degradation of mono- as well as binary-dye solutions of Congo red (CR) and methyl green (MG) dyes. The formation was verified by various characterization techniques such as FTIR, VSM, XRD, XPS, SEM, TEM, and EDX mapping. Interestingly, Ni-MCA shows faster result on anionic dye CR up to 97% with degradation rate of 5.647 × 10−1 min−1, and MG dye shows degradation of 95.7% with the degradation rate of 2.169 × 10−1 min−1, while dye mixture is showing 90% degradation with rate of 2.159 × 10−1 min−1. [ABSTRACT FROM AUTHOR]

Advances in electronics and medical diagnostics have made organic dyes extremely popular as key functional materials. From a practical viewpoint, it is necessary to assess the spectroscopic and physicochemical properties of newly designed dyes. In this context, the condensation of 1,3-dimethylbarbituric acid with electron-rich alkylaminobenzaldehyde derivatives has been described, resulting in a series of merocyanine-type dyes. These dyes exhibit intense blue-light absorption but weak fluorescence. An electron-donating alkylamino group at position C4 is responsible for the solvatochromic behavior of the dyes since the lone electron pair of the nitrogen atom is variably delocalized toward the barbituric ring, which exhibits electron-withdrawing properties. This was elucidated, taking into account the different geometry of the amino group. The intramolecular charge transfer in the molecules is responsible for the relatively high redshift in absorption and fluorescence spectra. Additionally, an increase in solvent polarity moves the absorption and fluorescence to lower energy regions. The observed solvatochromism is discussed in terms of the four-parameter Catalán solvent polarity scale. The differences in the behavior of the dyes were quantified with the aid of time-dependent density functional theory calculations. The obtained results made it possible to find regularities linking the basic spectroscopic properties of the compounds with their chemical structure. This is important in the targeted search for new, practically important dyes. [ABSTRACT FROM AUTHOR]

Bimetallic nanoparticles with synergistic effects revealed much higher catalytic activity than respective monometallic materials. This review describes bimetallic nanoparticles, especially silver nanoparticles, combined with the other transition elements, such as Ag−Fe, Ag−Co, Ag−Ni, and Ag−Cu, as an enhanced catalytically active material. The coverage is given to the various methods of preparation, in which factors responsible for different structures of bimetallic nanoparticles are thoroughly discussed. Lastly, we explore the use of bimetallic nanoparticles as a catalyst for the degradation of numerous organic pollutants that contribute to water pollution. [ABSTRACT FROM AUTHOR]

It is necessary to develop methods for rapid degradation of untreated waterborne contaminants due to their serious impact on the environment and human health. Here, we proposed a rapid and efficient microplasma electrochemistry (MIPEC) method for organic dye and antibiotic degradation. The atmospheric-pressure plasma acted as the anode and it could generate reactive radicals for rapid and complete degradation of rhodamine B (RhB) in about 6 min, which is one of the fastest methods to our knowledge. Similarly, the degradation of ciprofloxacin (CIP) has also been achieved. This method with mild and convenient operation conditions could be applied in a wide pH range due to the unique properties of the plasma anode, unrestricted by the pH of wastewater. The mechanism study revealed that more reactive species could be generated at the plasma anode than at the cathode, leading to a faster reaction rate at the anode side and the presence of oxygen could also accelerate the generation of reactive species. Besides, the MIPEC method can be used to treat a variety of dyes separately and together in minutes in different water bodies, making it a universal method suitable for treating different dyes in wastewater. This work provides a rapid and efficient method for waterborne contaminant degradation without any secondary pollution and need for post treatment, and also broadens the application field of the MIPEC method. [ABSTRACT FROM AUTHOR]

Fabrication of efficient perovskite photo-Fenton catalytic systems is recognized as an effective strategy for clean water production. However, modifying perovskite catalysts effectively remains a formidable challenge. In this study, we prepared Bi-doped LaFeO 3 photo-Fenton catalysts using a facile microwave-assisted method. Various characterization techniques confirmed the successful formation of these Bi-doped LaFeO 3 perovskite materials. The photo-Fenton activity of the Bi-doped LaFeO 3 perovskite materials with varying Bi content was assessed by monitoring the degradation of methylene blue (MB) dye solution. Remarkably, the optimized Bi-doped LaFeO 3 (referred to as LBFO3) catalyst achieved approximately 93.64% degradation of MB within 100 min of visible light exposure, demonstrating exceptional efficacy in treating wastewater containing organic dye pollutants. The enhanced photocatalytic activity of the LBFO3 perovskite materials arises from the incorporation of Bi, leading to an expanded optical absorption range, increased specific surface area, and enhanced separation and migration of photo-generated carriers. Importantly, the LBFO3 photo-Fenton system exhibited remarkable stability during four successive cycling treatments, indicating promising practical applications. Additionally, quenching experiments were conducted to elucidate electron transfer in the LBFO3 catalyst related to the photo-Fenton degradation mechanism of MB. This study might pave the way toward designing novel perovskite based photo-Fenton systems for highly efficient degradation of waterborne contaminants. [ABSTRACT FROM AUTHOR]

To achieve the actual application of MoO x in absorption removal of organic dye from water, eco-friendly, facilely-scalable, high-yield, and cost-efficient synthesis of MoO x with desirable structures and superior adsorption capacities remains a great challenge. Herein, for the first time, a novel synthetic route to MoO 3 micro-/nanocrystals with different microstructures was based on mechanochemical reactions and subsequent annealing, and their inherent formation mechanisms were also discussed. Moreover, the adsorption kinetics, thermodynamics, and mechanism of Rhodamine B (RhB) on α h -MoO 3 hybrid were systematically investigated. The results show that the microstructures of MoO 3 can be controlled by facile adjusting the dosage of H 2 C 2 O 4 ·2H 2 O, which leads to the different milling precursors. The bicrystalline hybrid of α-MoO 3 nanosheets and h -MoO 3 microrods (α h -MoO 3 hybrid) exhibits an ultrahigh maximum adsorptive capacity (751.88 mg g−1) for RhB at the high initial concentration (80 mg L−1), more than 3 times enhancement compared to that of α-MoO 3 particles (210.16 mg g−1), which can be attributed to the larger specific surface area (28.77 m2 g−1) and more negative surface potential (−72.00 mV). This work provides a scalable and controllable route to synthesize MoO 3 micro-/nanocrystals with desired microstructures, contributing a promising and excellent adsorbent for the practical removal of organic dyes from water. [ABSTRACT FROM AUTHOR]

A new amphiphilic azo‐functionalized polyhedral oligomeric silsesquioxane (POSS) derivative was synthesized by functionalizing octa(3‐aminopropyl)silsesquioxane (OAS‐POSS) with 4‐((4‐(dodecyloxy)phenyl)diazenyl)benzoic acid, affording a hydrophilic amino POSS head and hydrophobic dodecyl tail with a diphenyl‐azo connector. Prepared amphiphilic azo‐functionalized POSS (azo‐POSS) exhibited high ability for encapsulation and transferring cationic dyes into the organic phase by vigorously mixing with aqueous solutions of each dye. The photo‐controlled encapsulating properties of the synthesized phase transfer reagent was studied using cationic dyes, such as methylene blue (MB), crystal violet (CV) and thymol blue in acidic conditions. Results showed more than 95 % encapsulation of MB. However, no considerable encapsulation was shown in the case of anionic dyes such as eriochrome black T (EBT) and thymol blue in alkaline solutions. By trans/cis isomerization of the azo moiety of the phase transfer reagent by UV irradiation (365 nm), the amount of dye encapsulation was decreased, which could be attributed to the formation of cis isomer that led to the folding of the dodecyl alkyl tail on the POSS moiety, and therefore prevent to lay the 3‐aminopropyl moieties of POSS head to the water/DCM interface to adsorb and encapsulate MB molecules. [ABSTRACT FROM AUTHOR]

The results of evaluating the adsorption and fluorescent properties of azolotriazine compounds and phases based on cadmium sulfide quantum dots in vapors of volatile organic compounds (biomarkers of living systems) are considered. The adsorption properties of phases based on organic dyes and encapsulated semiconductors towards vapors of alcohols, ketones, amines, acids, ammonia, and aldehydes are investigated using direct high-sensitivity piezoelectric quartz microweighing. The spectral properties and their variations in analyte vapors are investigated using various spectroscopy methods (absorption, photoluminescence). The research results are compared, and the potential for optimizing this stage is assessed. It is proposed to evaluate the consistency of methods for predicting changes in fluorescent properties in test systems for volatile organic compounds using the Kendall coefficient of concordance, W. The highest level of agreement (W = 0.89) was observed between the methods of spectrofluorimetry and direct vapor microweighing upon adsorption on phases being potential fillers of test systems. A correlation between the results obtained by different fluorescence methods (visual plate test systems and fluorimetry of phases on paper substrates) is 0.80, which confirms a high degree of consistency in assessments using them in the degree of interaction between the analytes and organic, combined fluorochromes. The methods closely related in the nature of the analytical response do not exhibit better agreement than the method of direct vapor microweighing on microphases of fluorimetric reagents of different nature (cadmium sulfide quantum dots/chitosan, organic azolotriazine compounds, mixed phases). This, in turn, enables the selection of simpler, more available, and more rapid methods and means of analysis in routine experiments. [ABSTRACT FROM AUTHOR]

A series of new granular carbonaceous adsorbents was prepared via single-stage physical and chemical activation of walnut shells. Their suitability for removing various types of organic pollutants (represented by dyes, surfactants and water-soluble polymers) from the liquid phase was assessed. The activation of the precursor was carried out with CO2 and H3PO4 using conventional heating. Activated biocarbons were characterized in terms of chemical composition, acidic–basic nature of the surface, textural and electrokinetic properties as well as thermal stability. Depending on the type of activating agent used during the activation procedure, the obtained biocarbons differed in terms of specific surface area (from 401 to 1361 m2/g) and the type of porous structure produced (microporosity contribution in the range of 45–75%). Adsorption tests proved that the effectiveness of removing organic pollutants from the liquid phase depended to a large extent on the type of prepared adsorbent as well as the chemical nature and the molecular size of the adsorbate used. The chemically activated sample showed greater removal efficiency in relation to all tested pollutants. Its maximum adsorption capacity for methylene blue, poly(acrylic acid), poly(ethylene glycol) and Triton X-100 reached the levels of 247.1, 680.9, 38.5 and 61.8 mg/g, respectively. [ABSTRACT FROM AUTHOR]

Organic dyes are widely used in many important areas, but they also bring many issues for water pollution. To address the above issues, a reconstructed kaolinite hybrid compound (γ-AlOOH@A-Kaol) was obtained from raw kaolinite (Kaol) in this work. The product was then characterized by X-ray diffraction (XRD), Fourier-transform infrared (ATR-FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM), and the absorption properties of γ-AlOOH@A-Kaol for congo red were further studied. The results demonstrated that flower-like γ-AlOOH with nanolamellae were uniformly loaded on the surface of acid-treated Kaol with a porous structure (A-Kaol). In addition, the surface area (36.5 m2/g), pore volume (0.146 cm3/g), and pore size (13.0 nm) of γ-AlOOH@A-Kaol were different from those of A-Kaol (127.4 m2/g, 0.127 cm3/g, and 4.28 nm, respectively) and γ-AlOOH (34.1 m2/g, 0.315 cm3/g, and 21.5 nm, respectively). The unique structure could significantly enhance the sorption capacity for congo red, which could exceed 1000 mg/g. The reasons may be ascribed to the abundant groups of -OH, large specific surface area, and porous structure of γ-AlOOH@A-Kaol. This work provides an efficient route for comprehensive utilization and production of Kaol-based compound materials that could be used in the field of environmental conservation. [ABSTRACT FROM AUTHOR]

The qualitative impact of pollutants on water quality is mainly related to their nature and their concentration, but in any case, they determine a strong impact on the involved ecosystems. In particular, refractory organic compounds represent a critical challenge, and several degradation processes have been studied and developed for their removal. Among them, heterogeneous Fenton treatment is a promising technology for wastewater and liquid waste remediation. Here, we have developed mono- and bimetallic formulations based on Co, Cu, Fe, and Mn, which were investigated for the degradation of three model organic dyes (methylene blue, rhodamine B, and malachite green). The treated samples were then analyzed by means of UV-vis spectrophotometry techniques. Bimetallic iron-based materials achieved almost complete degradation of all three model molecules in very short time. The Mn-Fe catalyst resulted in the best formulation with an almost complete degradation of methylene blue and malachite green at pH 5 in 5 min and of rhodamine B at pH 3 in 30 min. The results suggest that these formulations can be applied for the treatment of a broad range of liquid wastes comprising complex and variable organic pollutants. The investigated catalysts are extremely promising when compared to other systems reported in the literature. [ABSTRACT FROM AUTHOR]

Herein, we have designed polyfunctional materials of d10‐configuration Cd (II) "Cd‐CP." The coordination polymer Cd‐CP was synthesized using benzene‐1,4‐dicarboxylic acid and 3,5‐diaminotriazole via solvothermal reaction. The Cd‐CP has been fully characterized by using single X‐ray crystallography, thermogravimetric analysis (TGA), Fourier transform–infrared (FT‐IR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) analysis. Single crystal X‐ray crystallography revealed that the CP‐Cd crystallized in triclinic space group P – 1 with the chemical composition [(BDC)(DAT)2Cd2Cl] (CH3)2 NH2+ · H2O. The present study investigated the impact of different reaction parameters, including the concentration of MG, the dosage of catalyst, and the duration of irradiation, on the outcome demonstrating a high level of photocatalytic efficacy at 99.19% under visible light irradiation. The obtained kinetic data exhibited conformity with a pseudo‐first‐order model, indicating that the rate‐determining step is likely to be photo‐absorption. The value of the apparent rate constant was found to be 0.019 min−1 for 50 mg L−1, 0.016 min−1 for 100 mg L−1, and 0.015 min−1 for 150 mg L−1 MG concentration. The corresponding half‐life time was found to be 36.44, 43.31, and 46.20 min with values of correlation coefficient (R2) as 0.99, 0.93, and 0.98, respectively. Moreover, a trapping experiment was conducted to demonstrate that hydroxy radicals (•OH) are the principal reactive oxygen species (ROS) responsible for the degradation of MG. The results of the total organic carbon (TOC) study indicated a mineralization value of around 89%, suggesting that the dye has been completely degraded into non‐toxic by‐products such as carbon dioxide (CO2) and water (H2O). [ABSTRACT FROM AUTHOR]

Reaction of Mn(OAc)2·4H2O with pentaerythritol (H4peol) in the presence of NaSCN leads to formation of a 1-D coordination polymer (CP) based on Mn(II), [Mn(SCN)2(peol)]n (1, SCN− = thiocyanate), under solvothermal conditions. EA, FTIR, PXRD, SCXRD and TGA analyses were used to study the composition and phase purity of the Mn(II) coordination polymer. The degradation of alizarin was investigated using organic framework substances as degradation agents. The results showed that the maximum degradation value of 86.12% was achieved at 50 min. This study not only promotes the preparation of organic frameworks, but also provides a feasible solution for the effective degradation of alizarin. [ABSTRACT FROM AUTHOR]

Photothermal nanoparticles are recent materials which provide additional capacity supply during the photocatalytic reactions. Iron disulfide (FeS2) nanoparticles with unique chemical and optical properties effectively absorb the full broad spectrum and convert the solar energy into chemical energy owing to its small band gap energy of 1.5 eV. However, the fast electron–hole pair recombination reduces the efficiency of FeS2 and depresses the redox reaction. In this novel research, FeS2/CeO2 heterojunctions are prepared for successful decomposition of rhodamine B dye as toxic pollutant belonging to xanthene dye group. CeO2 nanoparticles are fabricated through sol–gel procedure via triton- × 100 as pore directing agent. Nanoparticle's FeS2 is developed by the precipitating process under a N2-atmospheric condition. Various amounts of FeS2 particles were deposited in ultrasonic bath onto the surface of CeO2. The nanostructures, crystalline and optical properties of the solid specimens are evaluated by scanning and transmission electron microscopy (SEM and TEM) with Energy-dispersive X-ray spectroscopy (EDS), x-ray diffraction (XRD), photoluminescence (PL) and diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic efficiency of CeO2, FeS2 and various compositions of FeS2/CeO2 heterojunction was deliberated via following the decomposition of rhodamine B dye under UV radiation at 365 nm. FeS2 efficiently transfers the absorbability of the nanocomposite to deep visible region by decreasing the band gap energy of CeO2 from 2.3 to 1.5 eV revealing that FeS2 determines the optical properties of the nanocomposites. The charge transportation proceeds through type (I) heterojunction with accumulation of the massive charge carriers in the valence and conduction bands of FeS2 nanoparticles. The novel nanocomposite with strong absorbability of nearly full absorption spectrum could be an effective photocatalyst for decomposition of toxic organic dye from various sources of water. [ABSTRACT FROM AUTHOR]

An experimental study is presented on the possibility of using the fluorescence from organic dyes as a broadband light source together with a monochromator for applications in excitation–emission matrix (EEM) fluorescence spectroscopy. A high-power single-chip light-emitting diode (LED) was chosen as an excitation source with a central output wavelength at 365 nm to excite a fluorescent solution of Coumarin 1 dye dissolved in ethanol. Two excitation configurations were investigated: direct excitation from the LED and excitation through an optical-fiber-coupled LED. A Czerny–Turner monochromator with a diffraction grating was used for the spectral tuning of the fluorescence. A simple method was investigated for increasing the efficiency of the excitation as well as the fluorescence signal collection by using a diffuse reflector composed of barium sulfate (BaSO4) and polyvinyl alcohol (PVA). As research objects, extra-virgin olive oil (EVOO), Coumarin 6 dye, and Perylene, a polycyclic aromatic hydrocarbon (PAH), were used. The results showed that the light-emitting-diode-induced fluorescence was sufficient to cover the losses on the optical path to the monochromator output, where a detectable signal could be obtained. The obtained results reveal the practical possibility of applying the fluorescence from dyes as a light source for food system analysis by EEM fluorescence spectroscopy. [ABSTRACT FROM AUTHOR]

The study demonstrates the effective application of high-speed dispersion and bead mill dispermat systems in dispersing organic pigments, specifically phthalocyanine blue and green, in water with positive results. Particle size analysis reveals that formulations prepared using a bead mill with the selective surfactants such as Tween-80, SLS, Cocosulphosuccinate (CSPS) and Oleyl sulphosuccinate (OSPS) which exhibits a narrower range of particle size distribution compared to those prepared using high-speed dispersion (HSD). Phthalocyanine blue pigment concentrate formulation, the bead mill preparation using Tween-80 and CSPS surfactants resulted in a higher viscosity and color strength compared to HSD. In addition, the phthalocyanine green pigment concentrate formulation prepared using a bead mill with SLS surfactant showed higher color strength than the formulation prepared using HSD with SLS surfactant. Moreover, the comparative study reported the Nano CaCO3 pigment concentrate formulation prepared using a bead mill with SLS surfactant displayed a narrow range of particle size distribution ranging from 0.31 to 0.56 nm, with an average particle size of 0.435 nm, compared to the formulation prepared using HSD. All these findings suggested bead mill dispermat system with specific surfactants can produce pigment dispersions with a narrower particle size distribution, higher color strength, and better viscosity compared to HSD which demonstrating its potential as a more efficient and effective method for pigment dispersion. [ABSTRACT FROM AUTHOR]

Photothermal therapy (PTT) represents a groundbreaking approach to targeted disease treatment by harnessing the conversion of light into heat. The efficacy of PTT heavily relies on the capabilities of photothermal agents (PTAs). Among PTAs, those based on organic dyes exhibit notable characteristics such as adjustable light absorption wavelengths, high extinction coefficients, and high compatibility in biological systems. However, a challenge associated with organic dye‐based PTAs lies in their efficiency in converting light into heat while maintaining stability. Manipulating dye aggregation is a key aspect in modulating non‐radiative decay pathways, aiming to augment heat generation. This review delves into various strategies aimed at improving photothermal performance through constructing aggregation. These strategies including protecting dyes from photodegradation, inhibiting non‐photothermal pathways, maintaining space within molecular aggregates, and introducing intermolecular photophysical processes. Overall, this review highlights the precision‐driven assembly of organic dyes as a promising frontier in enhancing PTT‐related applications. This article is categorized under:Therapeutic Approaches and Drug Discovery > Emerging TechnologiesTherapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic DiseaseDiagnostic Tools > In Vivo Nanodiagnostics and Imaging [ABSTRACT FROM AUTHOR]

This study explores the synthesis and modification of poly(N-vinylformamide-co-N-hydroxyethyl acrylamide) (poly(NVF-co-HEA)) hydrogels for cosmetic applications. Poly(NVF-co-HEA) hydrogels were produced followed by an acid hydrolysis reaction to produce poly(NVF-co-VAm-co-HEA) hydrogels, introducing poly(vinyl amine) (PVAm) into the structure. This modification considerably alters the hydrogels' properties, yielding materials with over 96% water content, predominantly in the form of non-freezing or free water, which is beneficial in the uptake and release of hydrophilic species. The primary amine groups from inclusion of VAm also improved the mechanical properties, as evidenced by an 8-fold increase in Young's modulus. The hydrogels also possessed pH-responsive behavior, which was particularly noticeable under acidic and basic conditions, where a large decrease in water content was observed (40% to 75% reduction). Characterizing the hydrogels' release capabilities involved using organic dyes of different functional groups and sizes to examine the pH impact on release. The results indicated that hydrolyzed hydrogels interacted more effectively with charged species, highlighting their suitability for pH-responsive delivery. The release of cosmetic active ingredients was also demonstrated through the controlled release of Liquid Azelaic™, specifically potassium azeloyl diglycinate (PAD). Our findings reveal that the hydrolyzed hydrogels exhibit superior burst release, especially under alkaline conditions, suggesting their suitability for cosmetic applications where controlled, pH-responsive delivery of active ingredients is desired. Overall, this investigation highlights the potential of hydrolyzed poly(NVF-co-HEA) hydrogels in cosmetic applications. Their ability to combine high water content with mechanical integrity, along with their pH-responsive release ability, allows for use in cosmetic formulations. [ABSTRACT FROM AUTHOR]

Water pollution by organic dyes represents a major health and environmental issue. Despite the fact that peptide-based hydrogels are considered to be optimal absorbents for removing such contaminants, hydrogel systems often suffer from a lack of mechanical stability and complex recovery. Recently, we developed an enzymatic approach for the preparation of a new peptide-based magnetogel containing polyacrylic acid-modified γ-Fe2O3 nanoparticles (γ-Fe2O3NPs) that showed the promising ability to remove cationic metal ions from aqueous phases. In the present work, we tested the ability of the magnetogel formulation to remove three model organic dyes: methyl orange, methylene blue, and rhodamine 6G. Three different hydrogel-based systems were studied, including: (1) Fmoc-Phe3 hydrogel; (2) γ-Fe2O3NPs dispersed in the peptide-based gel (Fe2O3NPs@gel); and (3) Fe2O3NPs@gel with the application of a magnetic field. The removal efficiencies of such adsorbents were evaluated using two different experimental set-ups, by placing the hydrogel sample inside cuvettes or, alternatively, by placing them inside syringes. The obtained peptide magnetogel formulation could represent a valuable and environmentally friendly alternative to currently employed adsorbents. [ABSTRACT FROM AUTHOR]

In this study, photocatalysts with high photocatalytic activity performance are synthesized by synthesizing graphene aerogel‐supported, cadmium‐doped TiO2 composites by hydrothermal method for the effective degradation of organic dyes in wastewater. Here, GA–TiO2–Cd is investigated as a photocatalyst for the degradation of toxic dyes named Orange G, Acid Blue 161, and Brilliant Green in the UV part of the light spectrum. As a result of the experiments, it is observed that the effective decomposition of organic dyes is due to graphene aerogel (GA) and cadmium‐doped TiO2 nanoparticles. The results show that for 20 ppm solutions of Orange G, Acid Blue 161, and Brilliant Green, dyes are removed at approximately 81.075%, 84.15%, and 95.18% in 120 min. The morphology and elemental analysis of the synthesized composites are determined using SEM‐EDS, crystal structure analysis by XRD, chemical bond analysis by FTIR, optical properties by UV‐Vis‐NIR spectrophotometry, and thermal resistance by TGA analysis. [ABSTRACT FROM AUTHOR]

Water, essential for all life, faces contamination challenges due to industrialization and unchecked urban development, producing pollutants such as organic dyes, detergents, heavy metals, and pesticides. This has emerged as one of the most pressing environmental concerns in recent years, with a particular emphasis on organic dyes due to their demonstrated health-related concerns. In this context, this paper reviews the use of photocatalysis as a wastewater treatment method, highlighting its significant potential for removing organic dyes from aqueous solutions. Additionally, the focus is on the design, development, performance enhancement, and overall research progress in fabricating graphene-based semiconductor nanocomposites as photocatalysts. Representative examples are discussed, emphasizing the potential of these nanocomposites in degrading toxic organic dyes through photocatalysis. The enhanced photoactivity is attributed to the synergistic effects of graphene and semiconductor materials, leading to improved light absorption, charge separation, and reactive oxygen species generation. This comprehensive review provides valuable insights to advance wastewater treatment technologies and address environmental impacts caused by organic dye pollution. [ABSTRACT FROM AUTHOR]