Search

The tight oil/gas reservoirs in China have showed the great exploration prospects and high production potential, with the characteristics of low porosity, low permeability, and significant heterogeneity in formation rocks. It remains a challenge to sort out the relations between reservoir wave responses and rock physical properties, and the further studies on the wave response patterns of tight reservoirs are in an urgent demand. The shear modulus and S- (shear) wave attenuation of rocks are affected by the properties of pore fluid and confining pressure. The ultrasonic wave experiments are performed on eight partially-saturated tight sandstone samples at different confining pressures, and we estimate S-wave attenuation with the spectral-ratio method. Results show that S-wave attenuation decreases with increasing confining pressure, and the water saturation case shows more loss compared to the oil saturation case, while the gas saturation case gives the lowest attenuation. We observe the S-wave relaxation peak at an intermediate water saturation for the gas-water partial-saturation case in general. S-wave attenuation increases with increasing porosity or permeability. Based on the measured rock physical properties, and combined with the Voigt–Reuss–Hill (VRH) average, differential effective medium (DEM) model and squirt-flow model, a tight rock attenuation model is proposed for analyzing the attenuation characteristics of fluid-saturated rocks at different confining pressures. The model reasonably describes the S-wave attenuation characteristics. The model predictions of S-wave attenuation show apparent pressure- and fluid-sensitivity at full saturation and partial saturation conditions. For sample TS1-19 at full saturation with different confining pressures, the S-wave peak attenuation predicted by the model ranges from 11.6 to 69.5, and decreases with confining pressure, while the relaxation frequency shifts to high frequency end. For the partial saturation condition of the sample, the predicted S-wave peak attenuation ranges from 15.5 to 39.8 at a confining pressure of 30 MPa and increases with water saturation, while the relaxation frequency shifts to low frequency end. For all the samples at 30MPa confining pressure, the predicted S-wave attenuation ranges from 5.6 to 38.6. At the full-saturation case, the predicted S-wave attenuation increases with porosity and decreases with confining pressure. For the partial saturation case, the S-wave attenuation predicted with the model and the Voigt and Reuss bounds generally increases with water saturation, whereas the experimentally-measured attenuation exhibits the peak attenuation at an intermediate saturation. [ABSTRACT FROM AUTHOR]

Tight gas sandstone reservoirs play an important role in the field of exploration and development of unconventional oil/gas resources. However, these reservoirs typically exhibit low-porosity and poor-permeability, with pore structures of strong heterogeneity comprising connected and isolated pores. The traditional rock physics models (such as the Gassmann model) are established under the assumption of fully connected pores, which cannot reasonably describe the complexity in tight reservoirs. In this regard, this work proposes a rock physics modeling approach aimed at tight sandstone reservoirs based on a reformulated Xu–White model. Specifically, the differential effective medium model and Xu–White model are combined to analyze the influences of isolated pores on the dry rock skeleton. To characterize the general effects due to the different pore types on rock elastic moduli, the volume content of connected pores is defined as a pore-connectivity parameter. The simulated annealing algorithm is applied to invert the parameter, which is treated as a weighting coefficient for correcting the wet rock elastic moduli, thereby improving the precision of rock physics modeling. The proposed approach is tested and verified by using the log data of the work area of Sichuan Basin, West China. The result shows that, compared with the conventional method, the P- and S-wave velocities predicted by the proposed method are consistent with the log data. In addition to the inversion results of the conventional petrophysical parameters, the inverted pore-connectivity parameter can be a good auxiliary attribute that assists locating potential targets for tight gas sandstone reservoirs. [ABSTRACT FROM AUTHOR]

Geometric heterogeneities in tight reservoir rocks saturated with a fluid mixture may exhibit different scale distribution characteristics. Conventional models of rock physics based on poroelasticity, which usually consider single‐scale pore structure and fluid patches, are inadequate for describing elastic wave responses. A major challenge is to establish the relationship between the wave response at different spatial scales and frequencies. To address this problem, three sets of observational data over a wide frequency range were obtained from a tight oil reservoir in the Ordos Basin, China. Ultrasonic measurements were made on eight sandstone samples at partial oil‐water saturation at 0.55 MHz. Data from six borehole measurements and seismic profiles were acquired and analyzed at about 10 kHz and 30 Hz, respectively. Analysis of the cast thin sections shows that dissolution pores and microcracks generally develop, with fractal dimensions of the pores ranging from 2.45 to 2.67 for the samples with porosities between 5.1% and 10.2%. Compressional wave velocity and attenuation were estimated from the observed data. The results show that the velocity dispersion from seismic to ultrasonic frequencies is 10.02%, mostly occurring between sonic and ultrasonic frequencies. The attenuation is stronger at higher oil saturation. The relationships between velocity, attenuation, and wavelength were established and can be used for further forward modeling and seismic interpretation studies. A partial saturation model has been derived based on effective differential medium theory and a double double‐porosity model, assuming that the medium contains fractal cracks and fluid patches. The effects of scale and saturation on wave responses are prevalent. Modeling results consistent with observed data show that the radii of cracks and fluid patches range from 0.1 μm to 2.8 mm, affecting ultrasonic, acoustic, and seismic attenuation. The multiscale data and proposed model quantify the relationship between fracture and fluid distributions and attenuation and could be useful for upscaling to the reservoir scale. The study helps improve the understanding of seismic wave propagation in partially saturated rocks, which has potential applications in seismic exploration, hydrocarbon production in reservoirs, and CO2 sequestration in aquifers. Plain Language Summary: The physical properties of the rock and fluid can be inferred from the measured elastic wave responses and energy dissipation characteristics. However, the effects of heterogeneities of different sizes and at different frequencies can hinder studies to quantify wave responses in a partially saturated porous medium, which are usually based on laboratory measurements. A major problem is the difference between observed frequencies and scales: megahertz in the laboratory, 10 of kilohertz in the borehole scale, and hertz in the seismic exploration scale. In this work, the frequency‐ and saturation‐dependent compressional velocity and attenuation are investigated using three geophysical data sets from the same tight reservoirs. A strong velocity dispersion over the measured frequency range is observed. The stronger attenuation at partial saturation may be caused by the multiscale heterogeneities of the pore structure and fluid patch distribution. A fractal poroelasticity model is developed by gradually inserting inclusions of different sizes with compliant pores and liquid patches into a homogeneous host skeleton. The wave responses are significantly affected by scale distribution and saturation. The proposed model, verified by the measured data, can be useful in interpreting the anelasticity of tight heterogeneous reservoirs in a broadband range. Key Points: We investigate how fluid saturation affects wave attenuation and dispersion over a wide frequency range in tight sandstone layersA partial saturation model describes the fractal properties of the layersThe size of the cracks and fluid patches are determined by applying the fractal model to the multiscale data [ABSTRACT FROM AUTHOR]

The production of shale gas plays an important role in the global oil/gas industries, which is considered to approach about 1/3 of the total natural gas production at 2040. In recent years, Wufeng–Longmaxi Formation shale in Sichuan Basin has become a key target of gas development in China. The detection of high-quality gas-producing areas based on the relation between pore structure, mineralogy and elastic properties is the main research direction. However, the effects of depositional environment and diagenetic processes are rarely considered in the studies of these petrophysical properties. We select core samples from the two boreholes to perform X-ray diffraction experiments together with another set of cores from the target formation to obtain scanning electron microscope images and ultrasonic velocities. The mineralogy, pore structure and elastic properties are analyzed. The formation is divided into two sections based on the reservoir characteristics and sedimentary environments. Then, we study the different diagenetic processes of the upper and lower sections. Three-dimensional rock-physics templates of the shale in the two sections are built by using equivalent medium theories and elastic attributes. The templates are calibrated with the samples and well-log data. A 2D survey line and a 3D seismic block of the upper and lower sections are selected, respectively, to map the mineral component, porosity and microcrack density. The good match between the predictions and log interpretation and actual gas content reports suggests that the rock-physics template based on differential diagenesis can be effectively used for further interpretation of seismic inversion results. [ABSTRACT FROM AUTHOR]

The wave-induced local fluid flow mechanism is relevant to the complex heterogeneity of pore structures in rocks. The analysis of the local fluid flow mechanism is useful for accurately describing the wave propagation characteristics in reservoir rocks. In the exploration and production of hydrocarbon reservoirs, the real stratum may be partially saturated with a multi-phase fluid mixture in general. Therefore, it is of great significance to investigate the wave velocity dispersion and attenuation features in relation to pore structures and fluids. In this work, the characteristics of fabric microstructures are obtained on the basis of pressure dependency of dry rock moduli using the effective medium theory. A novel anelasticity theoretical model for the wave propagation in a partially-saturated medium is presented by combining the extended Gurevich squirt-flow model and White patchy-saturation theory. Numerical simulations are used to analyze wave propagation characteristics that depend on water saturation, external patchy diameter, and viscosity. We consider a tight sandstone from the Qingyang area of the Ordos Basin in west China and perform ultrasonic measurements under partial saturation states and different confining pressures, where the basic properties of the rock are obtained at the full gas saturation. The comparison of experimental data and theoretical modeling results shows a fairly good agreement, indicating that the new theory is effective. [ABSTRACT FROM AUTHOR]

The prediction of the pore geometrical properties is important in the exploration and development of tight-sandstone hydrocarbon reservoirs. To investigate this topic, we have measured the porosity, permeability, P- and S-wave velocities, electrical conductivity, and axial and radial strains as a function of differential (confining minus pore) pressure of tight-sandstone samples, collected from the Zhongjiang gas field of Sichuan, in West China. The results show that the closure of cracks with pressure highly affects these properties. Then, we propose a multiphase reformulated differential effective-medium (R-DEM) model that employs the unified pore geometry (the same pores or cracks with different aspect ratios and volume fractions) for both elastic and electrical modeling. The model gives the pressure-dependence of the P- and S-wave velocities and electrical conductivity, and the experimental porosity and static moduli are used as constraints to estimate the pore geometry. The model describes the elastic properties of sandstones saturated with nitrogen gas, and the electrical conductivity when the pore fluid is brine. The prediction of the wet-rock S-wave velocities is less accurate, due to the presence of shear stiffening and weakening effects. Furthermore, we compare the results with those of the joint elastic-electrical inversion by using the dynamic instead of the static stiffness modulus. The results show that the latter provides a better agreement between theory and experiment. Subsequently, we show that the pore geometry estimated from the elastic or the electrical measurements separately (unjoint inversion) present discrepancies, indicating that a joint inversion is required. The published experimental data are also used to illustrate the model, and the results are satisfactory. • We have measured the porosity, velocities, electrical conductivity, and axial and radial strains of tight sandstones. • The data are interpreted by a multiphase reformulated differential effective-medium modelwith a unified pore geometry. • The results show that the proposed model successfully explains those properties. [ABSTRACT FROM AUTHOR]

Low porosity-permeability structures and microcracks, where gas is produced, are the main characteristics of tight sandstone gas reservoirs in the Sichuan Basin, China. In this work, an analysis of amplitude variation with offset (AVO) is performed. Based on the experimental and log data, sensitivity analysis is performed to sort out the rock physics attributes sensitive to microcrack and total porosities. The Biot–Rayleigh poroelasticity theory describes the complexity of the rock and yields the seismic properties, such as Poisson's ratio and P-wave impedance, which are used to build rock-physics templates calibrated with ultrasonic data at varying effective pressures. The templates are then applied to seismic data of the Xujiahe formation to estimate the total and microcrack porosities, indicating that the results are consistent with actual gas production reports. [ABSTRACT FROM AUTHOR]