Search

Fifth-generation (5G) and beyond networks are expected to serve large numbers of user equipments (UEs). Grant-based random access (RA) protocols are efficient when serving human users, typically with large data volumes to transmit. The strongest user collision resolution (SUCRe) is the first protocol that effectively uses the many antennas at the 5G base station (BS) to improve connectivity performance. In this paper, our proposal involves substituting the retransmission rule of the SUCRe protocol with a neural network (NN) to enhance the identification of the strongest user and resolve collisions in a decentralized manner on the UEs' side. The proposed NN-based procedure is trained offline, admitting different congestion levels of the system, aiming to obtain a single setup able to operate with different numbers of UEs. The numerical results indicate that our method attains substantial connectivity performance improvements compared to other protocols without requiring additional complexity or overhead. In addition, the proposed approach is robust regarding variations in the number of BS antennas and transmission power while improving energy efficiency by requiring fewer attempts on the RA stage. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) is being deployed to provide smart solutions for buildings, logistics, hospitals, and many more. It is growing with billions of connected devices. However, with such tremendous growth, maintenance and support are the hidden burdens. The devices deployed for IoT generally have a light microcontroller, low-power, low memory, and lightweight software. The software, which includes firmware and applications, can be managed remotely via a wireless connection. This improves flexibility, installation time, accessibility, effectiveness, and cost. The firmware can be updated constantly to remove known bugs and improve the functionality of the device. This work presents an approach to update firmware over-the-air (OTA) for constrained IoT devices. We used Narrowband IoT (NB-IoT) as the wireless communication standard to communicate between the managing server and devices. NB-IoT is one of the most promising low power wide area (LPWA) network protocols that supports more than 50k devices within a cell using a licensed spectrum. This work is a proof of concept demonstrating the usage of NB-IoT to update firmware for constrained devices. We also calculated the overall power consumption and latency for different sizes of the firmware. [ABSTRACT FROM AUTHOR]

Summary: A well‐optimized and well‐performed communication network protocol is necessary to build successful underwater acoustic sensor networks (UWASNs). But for wired and wireless communication, medium access control (MAC) has a great effect on network performance and optimization. But unlike land‐based MAC protocols, underwater MAC protocols come with various challenges and issues like high propagation delay, limited bandwidth for communication signals, large attenuation in network signals, and the high noise level in signals. It is very challenging to build a well‐optimized underwater MAC protocol. Also, in UWASN, sensor nodes are generally divided into sub‐network parts to reduce the propagation delay of data signals. But this creates the problem of non‐uniform traffic load in sensor nodes. So, considering these issues, dynamic hold time MAC (DHT‐MAC) protocol is proposed here. In this protocol, depending on the distance from the central node, sensor nodes are divided into two sub‐network zones (parent node and child node). Depending on the traffic load and propagation delay, the child nodes can change their respective parent nodes dynamically. Advantage of the proposed method is that, if any of the parent nodes stops working, the child node will connect to the nearest parent node. When collecting the data signals, it has been observed that child nodes have a light traffic load compared to parent nodes. So dynamic cooperative transmission MAC (DCT‐MAC) protocol which is a contention‐based MAC protocol has been used in child nodes and as parent nodes have high traffic load, reservation‐based MAC protocol has been used. [ABSTRACT FROM AUTHOR]

• Automated mechanism for configuring node radio parameters at run-time. • Distributed mechanism, primarily on nodes, reduces communication overhead. • Responds dynamically to both internal and external changes in network environment. • Supports multiple application requirements simultaneously. Advanced wireless communication technologies are leading towards large-scale, geographically distributed systems, which consist of thousands of co-existing devices with potentially conflicting application requirements, such as high data delivery ratio and low power consumption. At the same time, devices are challenged by varying environmental conditions, which can also lead to degradation in network performance. To ensure the overall network performance and service stability offered by individual devices, the devices must co-exist and adapt to changes in their surrounding environment. In this paper, an application-aware adaptive method is proposed to allow individual devices to dynamically and automatically decide and configure its communication parameters according to its application requirements and environmental conditions. The algorithm aims to enhance and maintain the network performance over time, while allowing every device to satisfy its application requirements. The algorithm is realised on the modern LoRaWAN network protocol. Simulated experiments confirm the proposed algorithm's ability to adapt to changing application requirements at runtime while maintaining network performance. They demonstrate an improvement in packet delivery ratio, energy consumption, and the novel ability to respond to an application's individual performance requirements. [ABSTRACT FROM AUTHOR]

In the era of expansion of smart sensing interconnected devices and their growing application in complex systems, the application of wireless communication technology becomes evident. Many wireless technologies are developed to facilitate the growth of systems such as the Internet of Things and Smart Cities. The application of a particular wireless technology in a particular system depends on many factors, such as purpose, requirements, complexity, range, and node deployment. IEEE 802.15.4 is a technical standard that defines the operation of low-rate wireless personal area networks. It is used as the basis for a group of network standards and protocols designed for wireless sensor networks. In this article, the basic features of the emerging IEEE 802.15.4g SUN low-powered wireless network standard, its application scenarios, and performance analyses are presented. [ABSTRACT FROM AUTHOR]

Quantum wireless communication networks are an important part of global quantum networks. Here we propose a measurement-device-independent quantum wireless network communication protocol, which can not only close detector-side-channel loopholes launched by malicious nodes but also remedy the drawback of a perfectly shared Greenberger-Horne-Zeilinger state between the nodes. Moreover, the correctness of the generated entanglement between the sender and the receiver is checked. The security analysis shows that the proposed protocol is secure against common attacks from malicious nodes. [ABSTRACT FROM AUTHOR]

Most existing network communication systems, such as the Internet, are built around the TCP/IP protocol stack. However, TCP/IP cannot effectively support the upcoming network communication systems with more wireless communication links and higher requirements in terms of throughput, latency, and reliability. In this article, we introduce a general network communication protocol design based on batched network coding (BNC), which includes the existing framework as a special case and whose design can be guided by channel coding theory. BNC-based protocols can have significant throughput gain for single-hop or multihop wireless communications and provide better trade-off among throughput, latency and reliability. [ABSTRACT FROM AUTHOR]

Low-power wireless communication is a central building block of cyber-physical systems and the Internet of Things. Conventional low-power wireless protocols make avoiding packet collisions a cornerstone design choice. The concept of synchronous transmissions challenges this view. As collisions are not necessarily destructive, under specific circumstances, commodity low-power wireless radios are often able to receive useful information even in the presence of superimposed signals from different transmitters. We survey the growing number of protocols that exploit synchronous transmissions for higher robustness and deficiency as well as unprecedented functionality and versatility compared to conventional designs. The illustration of protocols based on synchronous transmissions is cast in a conceptional framework we establish, with the goal of highlighting differences and similarities among the proposed solutions. We conclude this article with a discussion on open questions and challenges in this research field. [ABSTRACT FROM AUTHOR]

Liu, Y.; Xu, Y.; Zhang, K., and Feng, Y., 2019. Hardware design of marine buoy data communication terminal based on the 1st generation Beidou navigation positioning system. In: Guido-Aldana, P.A. and Mulahasan, S. (eds.), Advances in Water Resources and Exploration. Journal of Coastal Research, Special Issue No. 93, pp. 639–645. Coconut Creek (Florida), ISSN 0749-0208. Aiming at the actual situation of marine buoy data monitoring and the problems of poor anti-interference performance, low fault tolerance coefficient and high energy consumption in current communication system, the hardware design of marine buoy data communication terminal based on the 1st generation Beidou navigation positioning system is proposed. Based on the marine buoy system, the overall structure of communication terminal is designed. The main components of the hardware are Beidou communication module and wireless network communication module, and the auxiliary parts are antenna and power supply module. The long-distance part uses the inherent data transmission mode of Beidou navigation system to communicate, while the short-range part uses the radio network communication protocol to complete the data transmission. There are two UART interfaces in the hardware, one is connected with the auxiliary cabin, which is responsible for receiving the related data of the auxiliary cabin, including azimuth, attitude and pressure sensing, and the other UART interface is connected with the Beidou communication module, which is responsible for receiving positioning and navigation data and transmitting remote data. The experimental results show that the design has high signal-to-noise ratio, strong fault-tolerant performance, high positioning accuracy and communication success rate, low energy consumption and perfect performance. [ABSTRACT FROM AUTHOR]

The groundbreaking transformations triggered by the Industry 4.0 paradigm have dramatically reshaped the requirements for control and communication systems within the factory systems of the future. The aforementioned technological revolution strongly affects industrial smart and distributed measurement systems as well, pointing to ever more integrated and intelligent equipment devoted to derive accurate measurements. Moreover, as factory automation uses ever wider and complex smart distributed measurement systems, the well-known Internet of Things (IoT) paradigm finds its viability also in the industrial context, namely Industrial IoT (IIoT). In this context, communication networks and protocols play a key role, directly impacting on the measurement accuracy, causality, reliability and safety. The requirements coming both from Industry 4.0 and the IIoT, such as the coexistence of time-sensitive and best effort traffic, the need for enhanced horizontal and vertical integration, and interoperability between Information Technology (IT) and Operational Technology (OT), fostered the development of enhanced communication subsystems. Indeed, established technologies, such as Ethernet and Wi-Fi, widespread in the consumer and office fields, are intrinsically non-deterministic and unable to support critical traffic. In the last years, the IEEE 802.1 Working Group defined an extensive set of standards, comprehensively known as Time Sensitive Networking (TSN), aiming at reshaping the Ethernet standard to support for time-, mission- and safety-critical traffic. In this paper, a comprehensive overview of the TSN Working Group standardization activity is provided, while contextualizing TSN within the complex existing industrial technological panorama, particularly focusing on industrial distributed measurement systems. In particular, this paper has to be considered a technical review of the most important features of TSN, while underlining its applicability to the measurement field. Furthermore, the adoption of TSN within the Wi-Fi technology is addressed in the last part of the survey, since wireless communication represents an appealing opportunity in the industrial measurement context. In this respect, a test case is presented, to point out the need for wirelessly connected sensors networks. In particular, by reviewing some literature contributions it has been possible to show how wireless technologies offer the flexibility necessary to support advanced mobile IIoT applications. [ABSTRACT FROM AUTHOR]