Search

The incorporation of carbon materials can effectively enhance the performance of thermoelectric materials. By optimizing the thermoelectric properties of the carbon scaffold, it is possible to further improve the thermoelectric performance of the prepared carbon-based composites. To elevate the thermoelectric performance of the carbon scaffold, this work introduces a novel mesoscopic design strategy, utilizing natural flake graphite to create a three-dimensional ordered porous framework. Highly controllable anisotropic conductivity and thermal conductivity of the porous graphite skeleton were achieved, by combining sizable sodium chlorine templates (37.5–250 μm) with a natural flake graphite matrix (50–150 μm). A porous graphite with high electrical conductivity and low thermal conductivity along the vertical axis was obtained by carefully regulating the parameters. The sample demonstrated exceptional thermoelectric conversion performance, achieving a thermoelectric power factor of 12.2 μW m−1 K−2 and a figure of merit value of 28.3 × 10−4. Furthermore, the thermoelectric property of the samples could be greatly improved by adding a small amount of ferric chloride, with a thermoelectric power factor reaching 41.9 × 10−4 and a thermoelectric figure of merit reaching 81.4 μW m−1 K−2. This work provides an effective scheme for the mesoscopic regulation of porous graphite carbon structures and offers a new strategy for enhancing the performance of thermoelectric generators. [Display omitted] [ABSTRACT FROM AUTHOR]

In this study, we focus on important global issue containing both environmental pollution control and energy saving. High density polyethylene (HDPE) is utilized as supporting material to load paraffin, while Al2O3 nano-powder is added into composite behaving as thermal conductivity enhancement to form composite phase change materials (paraffin-Al2O3/HDPE composite PCMs). By the adsorption test and differential scanning calomeritry (DSC) curves, the loading ratio of paraffin in paraffin/HDPE composite is 60%, via taking phase change enthalpy and thermal conductivity into integrated consideration, the adding ratio of Al2O3 is 3% in paraffin-Al2O3/HDPE composite. And CMT4304 universal tester results manifest paraffin-Al2O3/HDPE composites have high compressive strength. For paraffin-Al2O3/HDPE composite with 3 mass% Al2O3, Fourier transformation infrared (FT-IR) result indicates no chemical interaction among raw materials but physical combination. DSC results identify composite PCM happens solid–solid phase transition at 33.3 ºC with enthalpy value of 10.7 J g−1 and melts at 48.8 ºC with enthalpy value of 95.1 J g−1, and thermal cycling measurements demonstrate the form-stable composite PCM with adequate stability after 300 times melting/freezing cycles. Furthermore, the thermal conductivity of paraffin/HDPE composite is enhanced by 119.4% to attain 0.419 Wm−1 K−1 after addition of Al2O3. To sum up, form-stable and tough paraffin-Al2O3/HDPE composite PCMs look promising for application in building field as solar energy utilization materials. [ABSTRACT FROM AUTHOR]