Search

• The spectral characteristics of different types of deterioration are analyzed. • The normalized spectral index is constructed to preliminarily identify the deterioration. • The relationship between spectral reflectance and Schmidt rebound value is established. • The deterioration identification models are established based on hyperspectral image texture features. Deterioration investigation is an essential foundation for understanding the preservation status of stone cultural heritage, as well as for carrying out emergency and preventive conservation. Traditional photogrammetry method for deterioration investigation in stone cultural heritage heavily relies on personnel experience and has low automation. To accurately evaluate the degree of deterioration and quantify its scale, different algorithms are used to establish the rebound value prediction model and deterioration identification model based on the hyperspectral image. The effects of different wavelength selection methods and different classification models are compared. The results show that the rebound value inversion model constructed by CARS and PLS delivers the most accurate forecasts, with R2 being no less than 0.85. The maximum error of the model when applied in the field does not exceed 20%. Different types of deterioration can be initially identified by the normalized spectral index constructed from the 530 nm and 675 nm wavelengths. In addition, all four classification models based on hyperspectral imaging texture features can identify different types of deterioration. The LGBM model has the highest identification accuracy of 0.98. It also has good performance in field identification. This study provides a new method for deterioration investigation in stone cultural heritage. [ABSTRACT FROM AUTHOR]

Currently, a reliable and easy-to-use method to monitor flocculation in the water treatment process is highly demanded, especially for small water purification stations. For this problem, in situ images were used to analyze the flocculation process under different conditions via jar tests. A texture feature of the gray level co-occurrence matrix was found to be helpful for monitoring the floc status, such as growth rate and settling velocity. To further verify this finding, we established the correlation between the texture time sequence curve (TTSC) and its corresponding floc status. The slope of the TTSC during the growth phase and during the settling phase can describe the growth rate and the settling velocity, respectively, i.e., the higher the slope, the higher the growth rate and settling velocity. In addition, significant differences between the TTSCs in various abnormal conditions and the normal condition of coagulation can be identified. By using the TTSC for detecting abnormal conditions, we again verified that the texture feature can reliably reflect the flocculation process. Our study helps to develop a low-cost, stable, and simple method for monitoring flocculation and detecting abnormal conditions, which can effectively be used in the operation and management of water treatment plants. HIGHLIGHTS Compared with the morphological features, the texture features are more stable.; The texture time sequence curve (TTSC) can describe flocculation.; Variation characteristics of TTSC can detect abnormal coagulation conditions.; TTSC-based methods can be readily applied online.;

A novel method of disease diagnosis, based on images that capture every part of a diseased plant, such as the leaf, the fruit, the root, etc., is presented in this paper. As is well known, the plant genotypic and phenotypic characteristics can significantly impact how plants are affected by viruses, bacteria, or fungi that cause disease. Assume that these data are unknown at the outset and that the appropriate precautions are not taken to prevent classifications skewed toward uninteresting traits. An approach to avoid categorization bias brought on by the morphology of leaves is suggested in this study. The basis of this approach is the extraction of textural features. Additionally, Bayesian Optimization is suggested to obtain training hyperparameters that enable the creation of better-trained artificial neural networks. First, we initially pre-processed the images from the PlantVillage dataset to remove background noise. Then, tiles from images were used to reduce any potential bias from leaf form. Finally, several cutting-edge tiny convolutional neural networks (CNNs), created for contexts with little processing power, were trained on a new dataset of 85 × 85 × 3 px images. MobileNet, which had a 96.31% accuracy rate, and SqueezeNet, which had a 95.05% accuracy rate, were the models that predicted the best performance. The results were then examined using Precision and Recall measures, which are important for identifying plant diseases.

Microsatellites are short strings of repeated sequences scattered throughout the human genome. Microsatellite Instability (MSI) is a phenomenon in which the length of microsatellites changes due to the insertion or deletion of repeated units in tumor tissues. MSI type gastric cancer often has unique molecular phenotypes and clinicopathological characteris- tics, and the instability of microsatellites determines whether gastric cancer patients respond well to immunotherapy. Therefore, preoperative detection of MSI status is of great significance for the formulation of treatment plans for gastric cancer patients. Traditional MSI detection methods require immunohistochemistry and genetic analysis, which not only require additional costs, but also are difficult to be extended to every patient in clinical practice. In this paper, image feature extraction technology and machine learning algorithm are applied to quantitative analysis of high-resolution histopathological images of gastric cancer patients to predict the MSI status of gastric cancer patients. The original data of 279 cases are obtained from the TCGA database. After pre-processing and up-sampling, 442 samples are obtained, and 445 quantitative image features are extracted from the histopathological images of each sample, including the first-order statistics, texture features and small wave characteristics of the images. Lasso regression is used to screen features and construct predictive labels (Risk-score) of gastric cancer MSI status, and the performance of predictive labels is verified through logistics classification model. Then, multivariate analysis is carried out in combination with the clinical characteristics of each patient, and personalized train diagram is constructed for MSI status prediction. The experimental results show that the prediction performance AUC value of the prediction label based on histone image texture features is 0.74, and the AUC value of the existing MSI prediction model based on histone image texture features is 0.73. Based on all samples, the AUC value of the MSI prediction model constructed by combining clinical features and Risk- score is 0.802, while the AUC value of the existing MSI prediction model combining clinical features and image features is only 0.752, compared with the existing methods, the MSI prediction model proposed in this paper has better prediction performance and can provide more valuable reference information for the clinical decision-making of gastric cancer patients. [ABSTRACT FROM AUTHOR]

The sea-sky line is an important basis for marine unmanned equipment to perceive the sea environment. However, due to the interference of many external factors, such as sea fog, illumination, and sea target occlusion, sea-sky line detection is challenging. Therefore, we present a texture feature-based local adaptive Otsu segmentation and Hough transform for sea-sky line detection. In this method, image texture features and weighted texture quantization are used to determine the sea-sky area. Based on this sea-sky area, a longitudinal block strategy is introduced, and a new adaptive Otsu segmentation method is applied to obtain the binary image of the sea-sky area. The obtained binary image is then post-processed to enhance the sea-sky line edge information. On this basis, a new adaptive Canny edge detector is applied, and the sea-sky line is extracted by the Hough transform. The experimental results show that the proposed sea-sky line detection method has high accuracy and robustness when handling images of complex marine environments. Compared with other algorithms, the detection error and the error standard deviation of the proposed method are relatively small, indicating that this method is more stable and accurate than other algorithms. [ABSTRACT FROM AUTHOR]

Around one in eight women will be diagnosed with breast cancer at some time. Improved patient outcomes necessitate both early detection and an accurate diagnosis. Histological images are routinely utilized in the process of diagnosing breast cancer. Methods proposed in recent research only focus on classifying breast cancer on specific magnification levels. No study has focused on using a combined dataset with multiple magnification levels to classify breast cancer. A strategy for detecting breast cancer is provided in the context of this investigation. Histopathology image texture data is used with the wavelet transform in this technique. The proposed method comprises converting histopathological images from Red Green Blue (RGB) to Chrominance of Blue and Chrominance of Red (YCBCR), utilizing a wavelet transform to extract texture information, and classifying the images with Extreme Gradient Boosting (XGBOOST). Furthermore, SMOTE has been used for resampling as the dataset has imbalanced samples. The suggested method is evaluated using 10-fold cross-validation and achieves an accuracy of 99.27% on the BreakHis 1.0 40X dataset, 98.95% on the BreakHis 1.0 100X dataset, 98.92% on the BreakHis 1.0 200X dataset, 98.78% on the BreakHis 1.0 400X dataset, and 98.80% on the combined dataset. The findings of this study imply that improved breast cancer detection rates and patient outcomes can be achieved by combining wavelet transformation with textural signals to detect breast cancer in histopathology images. [ABSTRACT FROM AUTHOR]

The identification of sedimentary structures in lithofacies is of great significance to the exploration and development of Paleogene shale in the Boxing Sag. However, due to the scale mismatch between the thickness of laminae and the vertical resolution of conventional wireline logs, the conventional lithofacies division method fails to realize the accurate classification of sedimentary structures and cannot meet the needs of reservoir research. Therefore, it is necessary to establish a lithofacies identification method with higher precision from advanced logs. In this paper, a method integrating the gray level co-occurrence matrix (GLCM) and random forest (RF) algorithms is proposed to classify shale lithofacies with different sedimentary structures based on formation micro-imager (FMI) imaging logging and elemental capture spectroscopy (ECS) logging. According to the characteristics of shale laminae on FMI images, GLCM, an image texture extraction tool, is utilized to obtain texture features reflecting sedimentary structures from FMI images. It is proven that GLCM can depict shale sedimentary structures efficiently and accurately, and four texture features (contrast, entropy, energy, and homogeneity) are sensitive to shale sedimentary structures. To accommodate the correlation between the four texture features, the random forest algorithm, which has been proven not to be affected by correlated input features, is selected for supervised lithofacies classification. To enhance the model's ability to differentiate between argillaceous limestone and calcareous mudstone, the carbonate content and clay content calculated from the ECS logs are involved in the input features. Moreover, grid search cross-validation (CV) is implemented to optimize the hyperparameters of the model. The optimized model achieves favorable performance on training data, validation data, and test data, with average accuracies of 0.84, 0.79, and 0.76, respectively. This study also discusses the application of the classification model in lithofacies and production prediction. [ABSTRACT FROM AUTHOR]

Image forgery is a crucial part of the transmission of misinfor)mation, which may be illegal in some jurisdictions. The powerful image editing software has made it nearly impossible to detect altered images with the naked eye. Images must be protected against attempts to manipulate them. Image authentication methods have gained popularity because of their use in multimedia and multimedia networking applications. Attempts were made to address the consequences of image forgeries by creating algorithms for identifying altered images. Because image tampering detection targets processing techniques such as object removal or addition, identifying altered images remains a major challenge in research. In this study, a novel image texture feature extraction model based on the generalized k-symbol Whittaker function (GKSWF) is proposed for better image forgery detection. The proposed method is divided into two stages. The first stage involves feature extraction using the proposed GKSWF model, followed by classification using the “support vector machine” (SVM) to distinguish between authentic and manipulated images. Each extracted feature from an input image is saved in the features database for use in image splicing detection. The proposed GKSWF as a feature extraction model is intended to extract clues of tam)pering texture details based on the probability of image pixel. When tested on publicly available image dataset “CASIA” v2.0 (Chinese Academy of Sciences, Institute of Automation), the proposed model had a 98.60% accuracy rate on the YCbCr (luminance (Y), chroma blue (Cb) and chroma red (Cr)) color spaces in image block size of 8 × 8 pixels. The proposed image authentication model shows great accuracy with a relatively modest dimension feature size, supporting the benefit of utilizing the k-symbol Whittaker function in image authentication algorithms. [ABSTRACT FROM AUTHOR]

Marine oil spills are one of the major threats to marine ecological safety, and the rapid identification of oil films is of great significance to the emergency response. Marine radar can provide data for marine oil spill detection; however, to date, it has not been commonly reported. Traditional marine radar oil spill research is mostly based on grayscale segmentation, and its accuracy depends entirely on the selection of the threshold. With the development of algorithm technology, marine radar oil spill extraction has gradually come to focus on artificial intelligence, and the study of oil spills based on machine learning has begun to develop. Based on X-band marine radar images collected from the Dalian 716 incident, this study used image texture features, the BP neural network classifier, and threshold segmentation for oil spill extraction. Firstly, the original image was pre-processed, to eliminate co-channel interference noise. Secondly, texture features were extracted and analyzed by the gray-level co-occurrence matrix (GLCM) and principal component analysis (PCA); then, the BP neural work was used to obtain the effective wave region. Finally, threshold segmentation was performed, to extract the marine oil slicks. The constructed BP neural network could achieve 93.75% classification accuracy, with the oil film remaining intact and the segmentation range being small; the extraction results were almost free of false positive targets, and the actual area of the oil film was calculated to be 42,629.12 m2. The method proposed in this paper can provide a reference for real-time monitoring of oil spill incidents. [ABSTRACT FROM AUTHOR]

Striped stem‐borer (SSB) larvae are one of the most serious insect pests that damages rice. In this study, the combined hyperspectral imaging and chemometric method are proposed detect the early SSB larvae infestation in rice stems. Firstly, hyperspectral reflectance data (390–1040 nm) of rice stems were collected for normal, 3 days of infection, 6 days of infection, and 9 days of infection, respectively. On the spectra, the average spectra of the region of interest of the rice stalk samples were extracted, and 19 characteristic wavelengths were screened by the successive projection algorithm (SPA). Morphological processing was performed on the pseudo‐color (generally known as RGB) images of rice stalk samples on the images. Then five image texture features based on the gray‐scale co‐occurrence matrix (GLCM) and nine image color features based on color moments were obtained. The evaluation models of SSB larval infestation based on full spectra, characteristic wavelengths, GLCM, color moments, and data fusion were developed using partial least squares discriminant analysis (PLS‐DA), respectively. The results show that performance of the PLS‐DA model based on the fusion of characteristic wavelengths and GLCM is best. The accuracy of both the comprehensive modeling set and the prediction set is above 97%. The accuracy of the degree of infestation classification is good for all categories, and only the samples on the third day of infection are slightly less accurate. In conclusion, the hyperspectral imaging technology can be used to effectively detect the infection degree situation of early SSB larval infestation. Practical Applications: Chemical control using insecticides to manage SSB infestation on rice is still the farmers' first choice. However, in the middle and late stages of rice growth, SSB larvae may moth into the inside of the rice stalk, and the rice provides a shelter for SSB so that the sprayed pesticides cannot reach SSB larvae, which produce a large number of overwintering SSB. This leads to the misuse of chemical pesticides, which causes serious pollution to the environment, pesticide residues also cause serious harm to the human body, and it also makes the pest resistance to pesticides rapidly increase. Therefore, it is necessary to find a rapid and effective detection method to detect the early infestation of SSB larvae on rice to reduce the use of pesticides and improve rice yield. [ABSTRACT FROM AUTHOR]

As internet speeds increase and user demands for video quality grow, video coding standards continue to evolve. H.266/Versatile Video Coding (VVC), as the new generation of video coding standards, further improves compression efficiency but also brings higher computational complexity. Despite the significant advancements VVC has made in compression ratio and video quality, the introduction of new coding techniques and complex coding unit (CU) partitioning methods have also led to increased encoding complexity. This complexity not only extends encoding time but also increases hardware resource consumption, limiting the application of VVC in real-time video processing and low-power devices.To alleviate the encoding complexity of VVC, this paper puts forward a Bayesian and texture-feature-based fast splitting algorithm for coding intraframe bloc of VVC, which aims to reduce unnecessary computational steps, enhance encoding efficiency, and maintain video quality as much as possible. In the stage of rapid coding, the video frames are coded by the original VVC test model (VTM), and Joint Rough Mode Decision (JRMD) evaluation cost is used to update the parameter in the Bayesian algorithm to come and set the two thresholds to judge whether the current coding block continues to be split or not. Then, for coding blocks larger than those satisfying the above threshold conditions, the predominant direction of the texture within the coding block is ascertained by calculating the standard deviations along both the horizontal and vertical axes so as to skip some unnecessary splits in the current coding block patterns. The findings from our experiments demonstrate that our proposed approach improves the encoding rate by 1.40% on average, and the execution time of the encoder has been reduced by 49.50%. The overall algorithm has optimized the VVC intraframe coding technology and reduced the coding complexity of VVC. [ABSTRACT FROM AUTHOR]

Accurate estimation of gross primary production (GPP) of paddy rice fields is essential for understanding cropland carbon cycles, yet remains challenging due to spatial heterogeneity. In this study, we integrated high-resolution unmanned aerial vehicle (UAV) imagery into a leaf biochemical properties-based model for improving GPP estimation. The key parameter, maximum carboxylation rate at the top of the canopy ( V c m a x , 0 25 ), was quantified using various spatial information representation methods, including mean (μref) and standard deviation (σref) of reflectance, gray-level co-occurrence matrix (GLCM)-based features, local binary pattern histogram (LBPH), and convolutional neural networks (CNNs). Our models were evaluated using a two-year eddy covariance (EC) system and UAV measurements. The result shows that incorporating spatial information can vastly improve the accuracy of V c m a x , 0 25 and GPP estimation. CNN methods achieved the best V c m a x , 0 25 estimation, with an R of 0.94, an RMSE of 19.44 μmol m−2 s−1, and an MdAPE of 11%, and further produced highly accurate GPP estimates, with an R of 0.92, an RMSE of 6.5 μmol m−2 s−1, and an MdAPE of 23%. The μref-GLCM texture features and μref-LBPH joint-driven models also gave promising results. However, σref contributed less to V c m a x , 0 25 estimation. The Shapley value analysis revealed that the contribution of input features varied considerably across different models. The CNN model focused on nir and red-edge bands and paid much attention to the subregion with high spatial heterogeneity. The μref-LBPH joint-driven model mainly prioritized reflectance information. The μref-GLCM-based features joint-driven model emphasized the role of GLCM texture indices. As the first study to leverage the spatial information from high-resolution UAV imagery for GPP estimation, our work underscores the critical role of spatial information and provides new insight into monitoring the carbon cycle. [ABSTRACT FROM AUTHOR]

The simulation of object occlusion strategies in data augmentation sets all the pixels in the randomly cropped region of the input image to zero, which erases the effective texture features and leads to poor network generalization. Therefore, this paper proposes a novel data augmentation method known as the “ChannelCut” method. The “ChannelCut” includes two methods: ChannelCut1 and ChannelCut2. Firstly, three square regions are randomly selected on the input image, and the channels of the input image are split to three channel images. Secondly, the ChannelCut1 method selects a square region on the three channel images respectively. The pixels selected by the three channels are different from each other and are set to zero. At the same time, the ChannelCut2 method retains the pixels of the square area selected on each channel in the ChannelCut1 method, and the pixels of the other two square areas corresponding to the channel are set to zero. Finally, the two methods merge the three channel images together to obtain two random channel perturbed images. The proposed method is fused into CNN models such as Resnet18, ShuffleNet V2, MobileNet V3 and experiments are carried out on five datasets such as CIFAR-10 and Image-nette. The results show that the proposed method has a better classification accuracy than the mainstream method on five datasets. Furthermore, the baseline performance has shown a significant improvement. The proposed method has advantages in fine-grained image classification and outperforms the automatic data enhancement type method that uses reinforcement learning in terms of time performance. The ChannelCut method has strong generality and effectiveness, can retain image texture features to different degrees, and enrich image diversity, significantly improving the robustness and generalization of the convolutional neural network model.

Background: The aim of this study is to investigate the added value of combining tumour blood flow (BF) and metabolism parameters, including texture features, with clinical parameters to predict, at baseline, the pathological complete response (pCR) to neoadjuvant chemotherapy (NAC) in patients with newly diagnosed breast cancer (BC). Methods: One hundred and twenty-eight BC patients underwent a 18F-FDG PET/CT before any treatment. Tumour BF and metabolism parameters were extracted from first-pass dynamic and delayed PET images, respectively. Standard and texture features were extracted from BF and metabolic images. Prediction of pCR was performed using logistic regression, random forest and support vector classification algorithms. Models were built using clinical (C), clinical and metabolic (C+M) and clinical, metabolic and tumour BF (C+M+BF) information combined. Algorithms were trained on 80% of the dataset and tested on the remaining 20%. Univariate and multivariate features selections were carried out on the training dataset. A total of 50 shuffle splits were performed. The analysis was carried out on the whole dataset (HER2 and Triple Negative (TN)), and separately in HER2 (N=76) and TN (N=52) tumours. Results: In the whole dataset, the highest classification performances were observed for C+M models, significantly (p-value<0.01) higher than C models and better than C+M+BF models (mean balanced accuracy of 0.66, 0.61, and 0.64 respectively). For HER2 tumours, equal performances were noted for C and C+M models, with performances higher than C+M+BF models (mean balanced accuracy of 0.64, and 0.61 respectively). Regarding TN tumours, the best classification results were reported for C+M models, with better performances than C and C+M+BF models but not significantly (mean balanced accuracy of 0.65, 0.63, and 0.62 respectively). Conclusion: Baseline clinical data combined with global and texture tumour metabolism parameters assessed by 18F-FDG PET/CT provide a better prediction of pCR after NAC in patients with BC compared to clinical parameters alone for TN, and HER2 and TN tumours together. In contrast, adding BF parameters to the models did not improve prediction, regardless of the tumour subgroup analysed. [ABSTRACT FROM AUTHOR]

Summary: Background: The purpose of this study was to assess the correlation between textural features from 18fluorodeoxyglucose positron emission tomography (18F-FDG-PET) or computed tomography (CT) and EGFR mutation status in patients with stage IV adenocarcinoma lung cancer. Methods: In all, 71 patients who were diagnosed with stage IV adenocarcinoma lung cancer between April 2014 and August 2018 were included in this study. 18F-FDG-PET/CT scanning and EGFR mutation tests were performed before targeted molecular therapy. Textural features were extracted from manually segmented volumes of tumors, and highly dependent features were excluded. Multivariate logistic regression analysis was used to establish predictive models for detection of EGFR mutations. Receiver operating characteristic (ROC) curves were applied to evaluate areas under the curves (AUCs) of each model. Results: Of the 71 patients, 39 (54.9%) were EGFR mutation and 32 (45.1%) showed wild-type. EGFR mutation status was significantly associated with female sex (P = 0.026). In multivariate analysis, three PET (co-occurrence contrast, intensity-size-zone low-intensity large-zone emphasis, and texture spectrum max spectrum) and two CT quantitative features (intensity-size-zone high-intensity zone emphasis and normalized co-occurrence second angular moment) were independent predictors of EGFR mutation status. The predictive model generated from combined clinical and textural features showed a better predictive value than the model from textural features alone (AUC 0.897 vs 0.864). Conclusions: Textural features combined with clinical features could establish a model for improving the predicting power of EGFR mutation status in patients with stage IV adenocarcinoma lung cancer. [ABSTRACT FROM AUTHOR]

Today's forensic science introduces a new research area for digital image analysis formultimedia security. So, Image authentication issues have been raised due to the wide use of image manipulation software to obtain an illegitimate benefit or createmisleading publicity by using tempered images. Exiting forgery detectionmethods can classify only one of the most widely used Copy-Move and splicing forgeries. However, an image can contain one or more types of forgeries. This study has proposed a hybridmethod for classifying Copy-Move and splicing images using texture information of images in the spatial domain. Firstly, images are divided into equal blocks to get scale-invariant features.Weber law has been used for getting texture features, and finally, XGBOOST is used to classify both Copy- Move and splicing forgery. The proposed method classified three types of forgeries, i.e., splicing, Copy-Move, and healthy. Benchmarked (CASIA 2.0, MICCF200) and RCMFD datasets are used for training and testing. On average, the proposed method achieved 97.3% accuracy on benchmarked datasets and 98.3% on RCMFD datasets by applying 10-fold cross-validation, which is far better than existing methods. [ABSTRACT FROM AUTHOR]

Context: Due to the change and advancement in technology, day by day the internet service usages are also increasing. Smartphones have become the necessity for every person these days. It is used to perform all basic daily activities such as calling, SMS, banking, gaming, entertainment, education, etc. Therefore, malware authors are developing new variants of malwares or malicious applications especially for monetary benefits. Objective: Objective of this research paper is to develop a technique that can be used to detect malwares or malicious applications on the android devices that will work for all types of packed or encrypted malicious applications, which usually evade decompiling tools. Method: In the proposed approach, visualization method is used for the detection of malware. In the first phase, application files are converted into images and then in second phase, texture feature of images are extracted using Grey Level Co-occurrence Matrix (GLCM). In the last phase, machine learning classification algorithms are used to classify the malicious and benign applications. Results: The proposed approach is run on different datasets collected from various repositories. Different efficiency parameters are calculated and the proposed approach is compared with the existing approaches. Conclusion: We have proposed a static technique for efficient detection of malwares. The proposed technique performs better than the existing technique. [ABSTRACT FROM AUTHOR]

Permanent magnet synchronous motors (PMSMs) are extensively utilized in production and manufacturing fields due to their wide speed range, high output torque, fast speed response, small size and light weight. PMSMs are susceptible to inter-turn short circuit faults, demagnetization faults, bearing faults, and other faults arising from irregular vibrations and frequent start–brake cycles. While fault diagnosis for PMSMs offers an effective means to enhance operational efficiency, the multi-sensor information fusion is often overlooked. In industrial production processes, the collected data inevitably suffers from noise contamination, which can adversely impact diagnostic outcomes. To enhance the robustness of diagnostic methods in noisy environments and mitigate the risk of overfitting, a PMSM fault diagnosis method based on image features of multi-sensor fusion is proposed. Firstly, the vibration acceleration signals of the PMSM at different positions were acquired. Then, the newly designed multi-signal Gramian Angular Difference Fields (MGADF) method combines sensor signals from three different installation locations into a single image. Next, the multi-texture features are fused to extract the features of the image. Various machine models are compared in the fault feature learning and classification, and the results show that the proposed diagnostic method has good diagnostic accuracy and robustness, with an average diagnostic accuracy of 99.54% and a standard deviation of accuracy of 0.19. It has excellent performance even in noisy environments. The method is non-invasive and can be extended and applied to the condition monitoring and diagnosis of industrial motors. [ABSTRACT FROM AUTHOR]

Feature extraction is an important part for coal and gangue recognition, which has direct impact on accuracy of recognition. However, the existing feature extraction methods for coal and gangue are not ideal, and so a feature extraction method with multi-fractal is proposed based on energy field normalization for target recognition of coal and gangue in this paper. In the method, the concept of target energy field is established based on 3D grey surface, and the normalized target energy is calculated by using pixels. Then, after analysis of the feature extraction process, a feature extraction algorithm with multi-fractal is proposed based on energy field, in which 3D grey surface is divided by different grid forms, and the pixels in grid are counted to obtain the probability density distribution matrix of pixels. The results of multiple feature extraction is observed visually from probability density distribution, spatial feature distribution, and multi-fractal spectrum to illustrate the measurability of the method for target textures, which is the quantitative attribute of feature extraction. In the experiment, this method is used to quantitatively measure grey texture, and the effectiveness of measured features in coal and gangue recognition is compared with other methods. The experiment results show that the method can achieve effective quantitative measurement for coal and gangue texture, and the recognition accuracy is higher than other methods. [ABSTRACT FROM AUTHOR]

Strawberry anthracnose, caused by Colletotrichum spp., is a major disease that causes tremendous damage to cultivated strawberry plants (Fragaria × ananassa Duch.). Examining and distinguishing plants potentially carrying the pathogen is one of the most effective ways to prevent and control strawberry anthracnose disease. Herein, we used this method on Colletotrichum gloeosporioides at the crown site on indoor strawberry plants and established a classification and distinguishing model based on measurement of the spectral and textural characteristics of the disease-free zone near the disease center. The results, based on the successive projection algorithm (SPA), competitive adaptive reweighted sampling (CARS), and interval random frog (IRF), extracted 5, 14, and 11 characteristic wavelengths, respectively. The SPA extracted fewer effective characteristic wavelengths, while IRF covered more information. A total of 12 dimensional texture features (TFs) were extracted from the first three minimum noise fraction (MNF) images using a grayscale co-occurrence matrix (GLCM). The combined dataset modeling of spectral and TFs performed better than single-feature modeling. The accuracy rates of the IRF + TF + BP model test set for healthy, asymptomatic, and symptomatic samples were 99.1%, 93.5%, and 94.5%, the recall rates were 100%, 94%, and 93%, and the F1 scores were 0.9955, 0.9375, and 0.9374, respectively. The total modeling time was 10.9 s, meaning that this model demonstrated the best comprehensive performance of all the constructed models. The model lays a technical foundation for the early, non-destructive detection of strawberry anthracnose. [ABSTRACT FROM AUTHOR]

In order to improve the recognition effect of laser images, this study designed an intelligent recognition method of laser images based on big data analysis technology. On the basis of setting up the laser holographic scanning device and parameters, the laser image is obtained by using the calibration method of vision system. In order to avoid the limitation of coordinate system in the process of laser image recognition, a rational function model with general attributes is constructed. Then, convolutional neural network is used to output the feature data of laser images, and Spark parallel support vector machine algorithm is used to complete the classification of laser images. Finally, the SVM classification model based on the big data analysis technology is constructed. The texture feature data can be input to quickly output the classification results of laser images, and then the intelligent classification and recognition of laser images can be realized according to the probability distribution. Experimental results show that this method can accurately identify the tiny features in laser images, and the recognition results have high peak signal-to-noise ratio and high recognition accuracy. [ABSTRACT FROM AUTHOR]

Retinal diseases is one of the major cause of vision impairments worldwide and the variations in fundus images help to identify these retinal diseases. Manual identification and segmentation of these fundus images is a tedious task and is highly prone to errors. Thus, a Dagum probability distribution function (PDF) based on matched filter (MF) for retinal blood vessel segmentation is proposed in this work. Initially, different features are extracted from the fundus images and these features are provided to the ensemble classifier to perform the task of disease classification. The overall performance of the proposed work is evaluated using different popular datasets such as DRIVE, STARE, HRF, IRDiD, Kaggle retinal, ORIGA and RFI. It is found that the specificity of 0.9802 and 0.9838 is achieved on DRIVE and STARE datasets respectively. In addition, the input image is predicted with HRF-glaucoma image '10_g.jpg', having a higher prediction accuracy of 95.45%. [ABSTRACT FROM AUTHOR]

The category identification and grade classification of tea are important to food safety and life safety. The category and grade of the whole tea batch are typically determined by random sampling. However, full distribution graphs of tea categories are hardly available. This study analyzed relevant features and model construction to improve model precision for the category identification of tea. Moreover, spectral and texture features of hyperspectral images of tea were discussed through principal component analysis and gray level concurrence matrix. The category identification models of tea based on spectral features, texture features, and the integration of the two were constructed on the basis of the support vector machine model. The optimal model was applied to hyperspectral images to produce the full category distribution graph of tea. Then, its accuracy was verified through an assessment. Results demonstrate that the model based on hyperspectral images integrating spectral and texture features achieves the highest accuracyon the prediction set, and the total accuracy reaches 94.3%. This outcome is higher than the accuracy of the model based on spectral features (88.9%) and the model based on texture features (85%). On the full-image scale, the overall classification accuracy of the model based on hyperspectral images of four kinds of tea reaches 90.3% when the training sample is only 1%. In addition, the corresponding Kappa coefficient is 0.87, indicating that the established model is feasible. The integration of spectral and texture features can overcome the influences of having different spectra for the same object to some extent. The proposed algorithm provides scientific guidance for authenticity verification, grade classification, and other practical production of tea. [ABSTRACT FROM AUTHOR]

Mapping informal settlements' diverse morphological patterns remains intricate due to the unavailability and huge costs of high-resolution data, as well as the spatial heterogeneity of urban environments. The accessibility to high-spatial-resolution PlanetScope imagery, coupled with the convenience of simple non-iterative clustering (SNIC) algorithm within the Google Earth Engine (GEE), presents the potential for Geographic Object-Based Image Analysis (GEOBIA) to map the spatial morphology of deprivation pockets in a complex built-up environment of Durban. Such advances in multi-sensor satellite image inventories on GEE also afford the possibility to integrate data from sensors with different spectral characteristics and spatial resolutions for effective abstraction of informal settlement diversity. The main objective is to exploit Sentinel-1 radar data, Sentinel-2 and PlanetScope optical data fusion for more accurate and precise localization of informal settlements using GEOBIA, within GEE. The findings reveal that the Random Forests classification model achieved informal settlement identification accuracy of 87% (F-score) and overall accuracy of 96%. An assessment of agreement between observed informal settlement extents and ground truth dimensions was conducted through regression analysis, yielding root mean square log error (RMSLE) = 0.69 and mean absolute percent error (MAPE) = 0.28. The results demonstrate reliability of the classification model in capturing variability of spatial characteristics of informal settlements. The research findings confirm efficacy of combined advantages of GEOBIA within GEE, and integrated datasets for more precise capturing of characteristic morphologic informal settlement features. The outcomes suggest a shift from standard static conventional approaches towards more dynamic, on-demand informal settlement mapping through cloud computing, a powerful analysis platform that simplifies access to and the processing of voluminous data. The study has important implications for identifying the most effective ways to map informal settlements in a complex urban landscape, thus providing a benchmark for other regions with significant landscape heterogeneity. [ABSTRACT FROM AUTHOR]

Early detection and diagnosis of brain tumors are essential for early intervention and eventually successful treatment plans leading to either a full recovery or an increase in the patient lifespan. However, diagnosis of brain tumors is not an easy task since it requires highly skilled professionals, making this procedure both costly and time-consuming. The diagnosis process relying on MR images gets even harder in the presence of similar objects in terms of their density, size, and shape. No matter how skilled professionals are, their task is still prone to human error. The main aim of this work is to propose a system that can automatically classify and diagnose glioma brain tumors into one of the four tumor types: (1) necrosis, (2) edema, (3) enhancing, and (4) non-enhancing. In this paper, we propose a combined texture discrete wavelet transform (DWT) and statistical features based on the first- and second-order features for the accurate classification and diagnosis of multiclass glioma tumors. Four well-known classifiers, namely, support vector machines (SVM), random forest (RF), multilayer perceptron (MLP), and naïve Bayes (NB), are used for classification. The BraTS 2018 dataset is used for the experiments, and with the combined DWT and statistical features, the RF classifier achieved the highest average accuracy whether for separated modalities or combined modalities. The highest average accuracy of 89.59% and 90.28% for HGG and LGG, respectively, was reported in this paper. It has also been observed that the proposed method outperforms similar existing methods reported in the extant literature. [ABSTRACT FROM AUTHOR]

This paper aims to develop an automatic feature extraction system for detecting icebergs in Antarctica. Extracting suitable features to discriminate an iceberg from sea ice and land melting based on its content is tedious. Especially in Synthetic Aperture Radar data, high image content is highly affected by speckle noise. Establishing the appropriate spatial relationship between pixels is not producing much accuracy with the standard low-level features. The proposed method introduces the two-level iceberg detection and tracking algorithm. The available samples were used to train the first-level convolution neural network-based features. False-positive predictions have been removed using the multiscale contourlet-based Haralick texture features in the second level. The final detected iceberg movement has been tracked using the temporal image data. The distance moved in both temporal images is computed with the help of latitude and longitude information. The proposed methodology exhibited the best performance over state-of-the-art methods and acquired 79.1% precision and 83.8 F1 score. [ABSTRACT FROM AUTHOR]

Nowadays, diagnosis of thyroid nodules is mainly based on clinical methods, which requires a lot of manpower and medical resources. Therefore, this work proposes an automated thyroid ultrasound nodule diagnosis method that combines convolutional neural networks and image texture features. The main steps include: Firstly, ultrasound thyroid nodule dataset is established by collecting positive and negative samples, standardizing of images and segmentation of nodule area. Secondly, through texture features extraction, feature selection and data dimensionality reduction, texture features model is obtained; Thirdly, by transfer learning, deep neural network is used to obtain feature model of the nodule in images; Then, texture features model and convolutional neural network feature model are combined to form a new nodule feature model called Feature Fusion Network; Finally, Feature Fusion Network is applied to train and improve performance than single network, and a deep neural network diagnosis model that can adapt to the characteristics of thyroid nodules is built. In order to test this method, 1874 groups of clinical ultrasound thyroid nodules are collected. Harmonic average F-score based on Precision and Recall is used as an evaluation indicator. Experimental results show that Feature Fusion Network can distinguish between benign and malignant thyroid nodules with an F-score of 92.52%. Compared with traditional machine learning methods and convolutional neural networks, performance of this work is better.

This paper presents classification of five different types of milled rice grain using various texture feature extraction models. Four different gray level based texture features extraction techniques are discussed in this work. The classification task is performed using an adaptive threshold back propagation neural network. The above four texture feature extraction techniques are compared with that of the proposed gray-level-size-zone matrix based rotation invariant texture model. The classification outcome of the proposed texture features extraction model is also validated through publicly available texture dataset from Brodatz's database. Results show that classification task based on the proposed texture model is able to achieve higher accuracy both in rice and standard data as compare to other four different texture features extraction techniques discussed in this work. Results also show that back propagation neural network provides better accuracy of 99.4% when compared with other statistical classifiers presented in this work. [ABSTRACT FROM AUTHOR]

An early evaluation of colorectal cancer liver metastasis (CRCLM) is crucial in determining treatment options that ultimately affect patient survival rates and outcomes. Radiomics (quantitative imaging features) have recently gained popularity in diagnostic and therapeutic strategies. Despite this, radiomics faces many challenges and limitations. This study sheds light on these limitations by reviewing the studies that used radiomics to predict therapeutic response in CRCLM. Despite radiomics' potential to enhance clinical decision-making, it lacks standardization. According to the results of this study, the instability of radiomics quantification is caused by changes in CT scan parameters used to obtain CT scans, lesion segmentation methods used for contouring liver metastases, feature extraction methods, and dataset size used for experimentation and validation. Accordingly, the study recommends combining radiomics with deep learning to improve prediction accuracy. [ABSTRACT FROM AUTHOR]

The automated and accurate detection of brain tumors is challenging for classifying brain Magnetic Resonance (MR) images. The conventional techniques for diagnosing the images are tedious and inefficient in decision making. Therefore, this work proposes an adaptive and non-invasive method for accurately classifying images into pathological and normal brain MR images to overcome these drawbacks. This system uses the Skull Stripping algorithm for removing the non-cerebral tissues. We have developed the Modified version of Simplified Pulse-Coupled Neural Network for segmenting the Region of Interest. The Stationary Wavelet Transform is employed for transforming the image to extract the multiresolution data from the segmented images. The dimensionality of the transformed images is high. Thus, texture- and intensity-based features are extracted from transformed images, and the features of least entropy are selected to make a set of prominent features. Finally, Probabilistic Neural Network and Linear Programming Twin Support Vector Machines with Newton-Armijo algorithm are applied for the classification of images. The validation of the experiments is carried out on the three databases, viz., DB-66, DB-160, and DB-255. The experimental results show that the suggested scheme is robust and effective as compared to other state-of-the-art schemes. The suggested method can assist the radiologists in treatment planning. Hence, the proposed method can effectively classify the brain MR images and be installed on medical machines. [ABSTRACT FROM AUTHOR]

The identification of script in a document page image is the first step for an OCR system processing multi-script documents. In this multilingual/multiscript world, document processing systems relying on the OCR that need human involvement to select the appropriate OCR package is definitely undesirable and inefficient. The development of robust and efficient methods for automatic script identification of a document is a subject of major importance for automatic document processing in a multilingual/multiscript environment. Thus, the basic objective is to come up with some intuitive methods having straightforward implementation without compromising with efficiency. The aim of this work is to evaluate state-of-the-art feature extraction and classification techniques in the field of automatic script identification of printed and handwritten documents and to propose the best combination for the same. [ABSTRACT FROM AUTHOR]

Structural cracks in concrete have a significant influence on structural safety, so it is necessary to detect and monitor concrete cracks. Deep learning is a powerful tool for detecting cracks in concrete structures. However, it requires a large quantity of training samples and is costly in terms of computational time. In order to solve these difficulties, a deep learning target detection framework combining texture features with concrete crack data is proposed. Texture features and pre-processed concrete data are merged to increase the number of feature channels in order to reduce the demand of training samples for the model and improve training speed. With this framework, concrete crack detection can be realized even with a limited number of samples. To accomplish this aim, self-made steel fiber reinforced concrete crack data is used for comparison between our framework and those without texture feature mergence or pre-processed concrete data. The experimental results show that the number of parameters that need to be fitted in the model training and training time can be correspondingly reduced and the detection accuracy can also be improved. [ABSTRACT FROM AUTHOR]

The problem of segmentation of natural and technogenic objects by panchromatic satellite images of ultra-high spatial resolution (<1 m) using texture analysis is considered. The effectiveness of various statistical methods for extracting textural features is analyzed. On the basis of numerical experiments, methods have been identified that make it possible to segment with high accuracy (>95%) the main types of natural and anthropogenic objects, as well as various structures of the plant canopy. The TTSPCA method is proposed, which makes it possible to share the most informative features extracted using various statistical methods. The results of test calculations show that this method has higher accuracy (>99%) in solving the problem of texture segmentation compared to the considered standard approaches. [ABSTRACT FROM AUTHOR]

Breast density has been recognised as an important biomarker that indicates the risk of developing breast cancer. Accurate classification of breast density plays a crucial role in developing a computer-aided detection (CADe) system for mammogram interpretation. This paper proposes a novel texture descriptor, namely, rotation invariant uniform local quinary patterns (RIU4-LQP), to describe texture patterns in mammograms and to improve the robustness of image features. In conventional processing schemes, image features are obtained by computing histograms from texture patterns. However, such processes ignore very important spatial information related to the texture features. This study designs a new feature vector, namely, K-spectrum, by using Baddeley's K-inhom function to characterise the spatial distribution information of feature point sets. Texture features extracted by RIU4-LQP and K-spectrum are utilised to classify mammograms into BI-RADS density categories. Three feature selection methods are employed to optimise the feature set. In our experiment, two mammogram datasets, INbreast and MIAS, are used to test the proposed methods, and comparative analyses and statistical tests between different schemes are conducted. Experimental results show that our proposed method outperforms other approaches described in the literature, with the best classification accuracy of 92.76% (INbreast) and 86.96% (MIAS). [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to realize automatic segmentation of lung parenchyma based on random walk algorithm to ensure the accuracy of lung parenchyma segmentation. The explicable features of pulmonary nodules were added into VGG16 neural network to improve the classification accuracy of pulmonary nodules. Materials and Methods: LIDC-IDRI, a public dataset containing lung Computed Tomography images/pulmonary nodules, was used as experimental data. In lung parenchyma segmentation, the maximum Between-Class Variance method (OTSU), corrosion and expansion methods were used to automatically obtain the foreground and background seed points of random walk algorithm in lung parenchyma region. The shortest distance between point sets was added as one of the criteria of prospect probability in the calculation of random walk weight function to achieve accurate segmentation of pulmonary parenchyma. According to the location of the nodules marked by the doctor, the nodules were extracted. The texture features and grayscale features were extracted by Volume Local Direction Ternary Pattern (VLDTP) method and gray histogram. The explicable features were input into VGG16 network in series mode and fused with depth features to achieve accurate classification of nodules. Intersection of Union (IOU) and false positive rate (FPR) were used to measure the segmentation results. Accuracy, Sensitivity, Specificity, Accuracy and F1 score were used to evaluate the results of nodule classification. Results: The automatic random walk algorithm is effective in lung parenchyma segmentation, and its segmentation efficiency is improved obviously. In VGG16 network, the accuracy of nodular classification is 0.045 higher than that of single depth feature classification. Conclusion: The method proposed in this paper can effectively and accurately achieve automatic segmentation of lung parenchyma. In addition, the fusion of multi-feature VGG16 network is effective in the classification of pulmonary nodules, which can improve the accuracy of nodular classification. [ABSTRACT FROM AUTHOR]

Cotton is an important economic crop, but large-scale field extraction and estimation can be difficult, particularly in areas where cotton fields are small and discretely distributed. Moreover, cotton and soybean are cultivated together in some areas, further increasing the difficulty of cotton extraction. In this paper, an innovative method for cotton area estimation using Sentinel-2 images, land use status data (LUSD), and field survey data is proposed. Three areas in Hubei province (i.e., Jingzhou, Xiaogan, and Huanggang) were used as research sites to test the performance of the proposed extraction method. First, the Sentinel-2 images were spatially constrained using LUSD categories of irrigated land and dry land. Seven classification schemes were created based on spectral features, vegetation index (VI) features, and texture features, which were then used to generate the SVM classifier. To minimize misclassification between cotton and soybean fields, the cotton and soybean separation index (CSSDI) was introduced based on the red band and red-edge band of Sentinel-2. The configuration combining VI and spectral features yielded the best cotton extraction results, with F1 scores of 86.93%, 80.11%, and 71.58% for Jingzhou, Xiaogan, and Huanggang. When CSSDI was incorporated, the F1 score for Huanggang increased to 79.33%. An alternative approach using LUSD for non-target sample augmentation was also introduced. The method was used for Huangmei county, resulting in an F1 score of 78.69% and an area error of 7.01%. These results demonstrate the potential of the proposed method to extract cotton cultivated areas, particularly in regions with smaller and scattered plots. [ABSTRACT FROM AUTHOR]

A tremendous amount of video data is transferred over the Internet from one location to another, and its amount is growing exponentially every day. Significant advances made in multipurpose video editing software technology have considerably increased the chances of digital video tampering/forgeries. Therefore, the authenticity of digital video has become important. In this paper, the passive algorithm based on the correlation consistency between entropy coded (DistrEn2D and MSE2D) frames for video forgery detection is proposed. The entropy-based texture feature, such as two-dimensional distribution entropy (DistrEn2D) and bi-dimensional multiscale entropy (MSE2D), is used in the proposed algorithm. This algorithm works in four stages and can investigate the presence of multiple forgeries in the videos. The first stage is pre-processing. In step second, the texture feature is extracted from the video frames. After that, inter-frame correlation consistency between Entropy coded frames is investigated to detect multiple forgeries. In the final stage, multiple forgeries are localized in the video using an abnormal point detection. An experimental result shows that the proposed algorithm (using DistrEn2D and MSE2D feature) provides better performance in identifying the forgeries present in the video. [ABSTRACT FROM AUTHOR]

Detection and recognition of Diabetic Retinopathy (DR) at the early phase can prevent the risk of gradual damage in the retina and vision loss. Many works have been introduced for automatic DR recognition and diagnosis in recent years. To date, there are still some issues that are required to work on to improve the quality and the performance of automatic DR recognition systems. Therefore, this paper introduces a machine learning-based approach for DR diagnosis and recognition by proposing texture analysis features of the GLDM technique (Contrast, Angular Second Moment, Entropy, Mean, and Inverse Difference Moment) feature and feed-forward neural network classifier. The proposed method has achieved a recognition accuracy of 95% according to undertaken experiments and performance analysis. [ABSTRACT FROM AUTHOR]

Copyright of Hydrographic Surveying & Charting / Haiyang Cehui is the property of Hydrographic Surveying & Charting Editorial Board and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Over the past years, image manipulation tools have become widely accessible and easier to use, whichmade the issue of image tampering farmore severe. As a direct result to the development of sophisticated image-editing applications, it has become near impossible to recognize tampered images with naked eyes. Thus, to overcome this issue, computer techniques and algorithms have been developed to help with the identification of tampered images. Research on detection of tampered images still carries great challenges. In the present study, we particularly focus on image splicing forgery, a type of manipulation where a region of an image is transposed onto another image. The proposed study consists of four features extraction stages used to extract the important features from suspicious images, namely, Fractal Entropy (FrEp), local binary patterns (LBP), Skewness, and Kurtosis. The main advantage of FrEp is the ability to extract the texture information contained in the input image. Finally, the "support vector machine" (SVM) classification is used to classify images into either spliced or authentic. Comparative analysis shows that the proposed algorithm performs better than recent state-of-the-art of splicing detection methods. Overall, the proposed algorithm achieves an ideal balance between performance, accuracy, and efficacy, which makes it suitable for real-world applications. [ABSTRACT FROM AUTHOR]

Clinical procedures, which require a large number of personnel and medical resources, receive the majority of the current focus on thyroid nodule diagnosis. An automated thyroid ultrasound nodule identification system is built using image texture data and convolutional neural networks in this study. The following are the major phases: The underlying stages in building a ultrasound thyroid knob dataset incorporate gathering positive and negative examples, normalizing pictures, and portioning the knob region. Second, a texture features model is built by selecting features, reducing the dimensionality of the data, and extracting texture features. Third, deep neural networks in move learning are utilized to create an element model of the knob in an image. The convolutional brain network highlight model and the surface component model were combined to create the brand-new knob include model known as the Feature Fusion Network. The Feature Fusion Network is used to prepare and improve performance over a single organization in order to create a demonstrative model for deep neural networks that can adapt to a variety of knob features. 1874 clinical ultrasonography thyroid knobs were gathered for this investigation. The musical normal F-score considering Accuracy and Review is utilized as an assessment metric. With an F-score of 92.52 percent, the study’s findings suggest that the Element Combination Organization can differentiate between benign and harmful thyroid knobs. As far as execution, this methodology performs better compared to standard ML procedures and convolutional neural networks.

Marine oil spills are one of the major threats to marine ecological safety, and the rapid identification of oil films is of great significance to the emergency response. Marine radar can provide data for marine oil spill detection; however, to date, it has not been commonly reported. Traditional marine radar oil spill research is mostly based on grayscale segmentation, and its accuracy depends entirely on the selection of the threshold. With the development of algorithm technology, marine radar oil spill extraction has gradually come to focus on artificial intelligence, and the study of oil spills based on machine learning has begun to develop. Based on X-band marine radar images collected from the Dalian 716 incident, this study used image texture features, the BP neural network classifier, and threshold segmentation for oil spill extraction. Firstly, the original image was pre-processed, to eliminate co-channel interference noise. Secondly, texture features were extracted and analyzed by the gray-level co-occurrence matrix (GLCM) and principal component analysis (PCA); then, the BP neural work was used to obtain the effective wave region. Finally, threshold segmentation was performed, to extract the marine oil slicks. The constructed BP neural network could achieve 93.75% classification accuracy, with the oil film remaining intact and the segmentation range being small; the extraction results were almost free of false positive targets, and the actual area of the oil film was calculated to be 42,629.12 m2. The method proposed in this paper can provide a reference for real-time monitoring of oil spill incidents.

UAV imaging provides an efficient and non-destructive tool for characterizing farm information, but the quality of the UAV model is often affected by the image’s spatial resolution. In this paper, the predictability of models established using UAV multispectral images with different spatial resolutions for nitrogen content of winter wheat was evaluated during the critical growth stages of winter wheat over the period 2021–2022. Feature selection based on UAV image reflectance, vegetation indices, and texture was conducted using the competitive adaptive reweighted sampling, and the random forest machine learning method was used to construct the prediction model with the optimized features. Results showed that model performance increased with decreasing image spatial resolution with a R2, a RMSE, a MAE and a RPD of 0.84, 4.57 g m−2, 2.50 g m−2 and 2.34 (0.01 m spatial resolution image), 0.86, 4.15 g m−2, 2.82 g m−2 and 2.65 (0.02 m), and 0.92, 3.17 g m−2, 2.45 g m−2 and 2.86 (0.05 m), respectively. Further, the transferability of models differed when applied to images with coarser (upscaling) or finer (downscaling) resolutions. For upscaling, the model established with the 0.01 m images had a R2 of 0.84 and 0.89 when applied to images with 0.02 m and 0.05 m resolutions, respectively. For downscaling, the model established with the 0.05 m image features had a R2 of 0.86 and 0.83 when applied to images of 0.01 m and 0.02 m resolutions. Though the image spatial resolution affects image texture features more than the spectral features and the effects of image spatial resolution on model performance and transferability decrease with increasing plant wetness under irrigation treatment, it can be concluded that all the UAV images acquired in this study with different resolutions could achieve good predictions and transferability of the nitrogen content of winter wheat plants.

The aim of this study was to evaluate whether textural analysis could differentiate between the two common types of lytic lesions imaged with use of radiography. Sixty-two patients were enrolled in the study with intraoral radiograph images and a histological reference study. Full textural analysis was performed using MaZda software. For over 10,000 features, logistic regression models were applied. Fragments containing lesion edges were characterized by significant correlation of structural information. Although the input images were stored using lossy compression and their scale was not preserved, the obtained results confirmed the possibility of distinguishing between cysts and granulomas with use of textural analysis of intraoral radiographs. It was shown that the important information distinguishing the aforementioned types of lesions is located at the edges and not within the lesion. [ABSTRACT FROM AUTHOR]