Search

A small granule starch from sand rice (Agriophyllum squarrosum) was subjected to heat‐moisture treatment (HMT) at different moisture contents (MCs,15%–30%). With MC≤20%, a higher MC resulted in increases in the starch orders (i.e., short‐range and crystalline structure) with unchanged granule morphology. Nonetheless, a further elevated MC (>20%) gradually destroyed the granule morphology and starch orders. Also, HMT gradually vanished the lamellar structure as MC increased during HMT. These structural evolutions in HMT‐modified starch resulted in greater thermal stability, higher pasting temperature, lower pasting viscosity and weakened digestibility. Particularly, HMT applied directly in sand rice starch at 20% MC obtained the highest amount of SDS and RS (23.6%), which was 2.2‐fold higher than that of native starch. Therefore, the small granule sand rice starch can be modulated by HMT through controlled MC to expand their application range in food production. [ABSTRACT FROM AUTHOR]

[Display omitted] • Critical melting with freeze–thaw (CMFT) can be used as a clean-label way to prepare porous starch. • Partial weakening of structure before FT is critical for porous starch formation. • Freezing rates determined the pore-forming characteristics of starch. • CMFT-prepared porous starch had more ordered double-helical structures. • CMFT significantly increased the thermostability and water/oil absorption of starch. In this work, critical melting (CM) combined with freeze-thawing treatment (FT, freezing at −20 ℃ and −80 ℃, respectively) was used to prepare porous starch. The results showed that CM combined with the slow freezing rate (−20 ℃) can prepare porous starch with characteristics of grooves and cavities, while combined with the rapid freezing rate (−80 ℃) can prepare with holes and channels, especially after repeating FT cycles. Compared with the native counterpart, the specific surface area, pore volume, and average diameter of CMFT-prepared porous starch were significantly increased to 4.07 m2/g, 7.29 cm3/g × 10−3, and 3.57 nm, respectively. CMFT significantly increased the thermal stability of starch, in which the To, Tp, and Tc significantly increased from 63.32, 69.62, and 72.90 (native) to ∼69, 72, and 76 °C, respectively. CMFT significantly increased water and oil absorption of porous starch from 91.20 % and 72.00 % (native) up to ∼163 % and 94 %, respectively. Moreover, CMFT-prepared porous starch had a more ordered double-helical structure, which showed in the significantly increased relative crystallinity, semi-crystalline lamellae structure, and the proportion of the double helix structure of starch. The synergistic effect of melting combined with ice recrystallization can be used as an effective way to prepare structure-stabilized porous starch. [ABSTRACT FROM AUTHOR]

The limited and unstable interactions between potato starch (PS) and xanthan gum (XG) by simple mixing (SM) lead it difficult to induce substantial changes in starchy products. Structural unwinding and rearrangement of PS and XG by critical melting and freeze-thawing (CMFT) were used to promote PS/XG synergism, and the physicochemical, functionalities, and structural properties were investigated. Compared to "Native" and SM, CMFT promoted the formation of large clusters with a rough granular surface and wrapped by a matrix composed of released soluble starches and XG (SEM), thus making the composite more compact to thermal processes, such as the significantly decreased WSI and SP, and increased the melting temperatures. The enhanced synergism of PS/XG after CMFT effectively decreased the breakdown viscosity from ~3600 (Native) to ~300 mPa·s and increased the final viscosity from ~2800 (Native) to ~4800. CMFT significantly increased the functional properties of PS/XG composite, including water/oil absorptions and resistant starch content. CMFT caused the partial melting and loss of large packaged structures in starch (XRD, FTIR, and NMR), and the melting and the loss of crystalline structure controlled at approximately 20 % and 30 %, respectively, are the most effective for promoting PS/XG interaction. • Critical melting and freeze-thawing (CMFT) enhanced potato starch/xanthan gum (PS/XG) interaction. • Starch melting and crystalline loss controlled at ~20 % and 30 %, respectively, are the most effective. • Soluble starches released by CMFT are beneficial to promote PS/XG interchain entanglement. • CMFT increased the functional properties of starch with decreased digestibility. • CMFT effectively raised the thermal, heating, and shear stability of starch. [ABSTRACT FROM AUTHOR]

Porous starch is one of the widely used multifunctional materials in food and pharmaceutical industries. This work was carried out to prepare porous starch by a novel clean-label method of critical melting (CM) and freeze-thawing (FT) treatment. Porous starch prepared by CMFT showed observable grooves and holes on the surface, channels and cavities inside the granule. Repeated FT after CM promoted the formation of porous structures, in which freezing rates showed different effects on the pore-forming properties of starch granules. Compared to the native counterpart, porous starch prepared by CMFT showed significantly increased thermal stability as shown by water solubility, swelling power, DSC, and RVA. CMFT treatment significantly increased water and oil absorption of porous starch from 85 to 75% (native) up to about 160 and 100%, respectively. Moreover, CMFT prepared porous starch showed the appearance of a visible diffraction peak at 20°, indicating a more ordered double-helical structure in starch granules. The synergistic effect of CM combined with FT could be used to prepare porous starch with "clean-label". [Display omitted] • Critical melting with freeze-thawing could be used for porous starch preparation. • The prepared porous starch has an increased thermostability. • Treatment significantly increased the water and oil absorption of porous starch. • Melting energy and ice crystals recrystallization are critical for porous structure formation. • Reassociation of leached soluble starches during treatment raised thermostability of starch. [ABSTRACT FROM AUTHOR]

An aqueous suspension of native potato starch (PS)/xanthan gum (XG) mixture was subjected to physical treatments, including critical melting (mild heating, MH; partial gelatinization, PG) and freeze-thawing (FT) treatments. The Physical treatments significantly changed the morphology, pasting, and structural characteristics of potato starch compared with the simple aqueous blending of PS and XG. Microscopy revealed that the starch granules partially melted and some of the melted granules aggregated into a cluster after critical melting and FT treatment. The overall intensity of X-ray diffraction peaks and relative crystallinity also decreased obviously after treatment, indicating partial disruption of the starch inner structure. Both XG addition and physical treatment decreased the solubility index, swelling power, and water holding capacity of starch after physical treatments. Moreover, the final viscosity (from 2988 to about 5000 mPa s) and shear stability (from 3542 to about 200 mPa s) of starch paste were substantially increased by the physical treatments. The critical melting caused the leaching of soluble starch, which induced the formation of starch/XG aggregate matrix attached to the surface of starch granules during FT treatment, contributing to the starch property modification. While the formation of these matrices might also be the reason for the increased thickness of the starch semi-crystalline lamellar structure. [Display omitted] • Critical melting and freeze-thawing treatments with xanthan gum (XG) effectively modified potato starch. • Treatments significantly changed the morphology, pasting and structural characteristics of starch. • Formation of soluble starch/XG matrix during treatments stabilized the starch granules against heating. • Treatments raised the final viscosity and shear stability of starch pastes. • Intensity of X-ray diffraction peaks and relative crystallinity decreased obviously after treatments. [ABSTRACT FROM AUTHOR]