Search

The magnetic reconnection process relevant to that at the magnetotail is one of the research contents of the Space Plasma Environment Research Facility, which is under construction at the Harbin Institute of Technology in China. Two magnetic mirror sub-coils placed symmetrically in the vertical direction and connected in series cooperate with a dipole coil to generate a magnetic field environment similar to the Earth's magnetotail. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite two magnetic mirror sub-coils to generate a magnetic field with a magnetic flux density of not less than 200 G at the center of the two sub-coils. The PPS should deliver a pulsed current with a peak of more than 8 kA, and the duration of the current not be less than 95% of the peak over 5 ms to two magnetic mirror sub-coils when the charging voltage is not less than 20 kV. In addition, the duration from the peak to 10% of the peak is not more than 130 ms. The detailed design of the PPS is discussed in this paper, and a test method is designed to reduce the risk of damage to the wires and the connection between the wires and the coaxial cables of the PPS when the PPS discharges at a higher charging voltage. Finally, the discharge test of the PPS is carried out to verify the design of the PPS. [ABSTRACT FROM AUTHOR]

The Space Plasma Environment Research Facility uses a coil system with the corresponding pulsed power supply (PPS) system to generate a very flexible magnetosphere-like magnetic configuration. Its purpose is to investigate the 3D asymmetric reconnection and the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration, as well as the physical mechanism of the dipolarization front in the magnetotail. The control and monitoring function of the PPS system is realized by the integrated control subsystem, which adopts a two-layer network structure of the control layer and device layer and is developed based on the Experimental Physics and Industrial Control System framework. The control layer includes a remote control system that consists of an engineer station and an operator station and the data storage system. Both the engineer station and operator station are developed by Control System Studio. The data storage system is based on the combination of the Hierarchical Data Format 5 database and MySQL database, and the data management software of the data storage system is developed based on LabVIEW. The synchronous trigger device, the safety interlocking device, the local controller of each set of PPS, and the module controller of each discharge module are the device layer. Their hardware is designed and developed based on the Field Programmable Gate Array, and their software is based on the Quartus II platform and programmed with the Verilog Hardware Description Language language. The function of the integrated control subsystem is verified by the discharge test of the PPS system. [ABSTRACT FROM AUTHOR]