Search

The authors investigate a semi‐flooded cooling technology for modular permanent magnet machines using flux gaps (FGs) in alternate stator teeth for extra cooling channels. The investigated machine is separated into stationary and rotational components by a polyether ether ketone sleeve. Liquid is directed into the stationary component to achieve a significant temperature reduction, at the same time, avoiding the liquid leakage into the rotating component that will cause an increase in friction losses. The FGs in the modular machine increase the contact area between coolant and machine components, resulting in better cooling efficiency. Furthermore, the FGs contribute to reduced pressure loss by minimising system flow resistance. The influence of the FG width on improving machine cooling efficiency, lowering machine temperature, and reducing pressure losses is delved. Additionally, the investigation considers the impact of inlet and outlet areas to reveal the influences stemming from fluid expansions and contractions in these regions. Computational fluid dynamics (CFD) modelling is employed to simulate the cooling performances of the investigated machines. In addition, the flow network analysis has also been employed to help understand the fluid behaviour within machines. A series of tests have been carried out to validate the CFD modelling. [ABSTRACT FROM AUTHOR]

Variable flux memory machines (VFMMs) with series hybrid magnets using both low coercive force (LCF) and high coercive force (HCF) permanent magnets (PMs) have been recognized as a viable candidate for wide-speed-range industrial applications due to the advantages of high torque density and wide speed range. Nevertheless, the adverse effects of LCF PM on the HCF PM in series-type VFMM under different magnetization states (MSs) are still unreported. In this paper, the flux barrier effect (FBE) of the LCF PM existing in series hybrid magnet VFMM is first revealed, and its causes are discussed as well as analyzed in depth on the basis of the equivalent magnetic circuit method and finite-element (FE) analyses. A topology of VFMM with dual-layer PMs is further developed to alleviate the FBE induced from LCF PMs. It can be found that the FBE can be effectively suppressed by employing the dual-layer (DL) PM arrangement and additional leakage flux paths. A prototype of the proposed design is built, and the theoretical and FE results are experimentally verified. [ABSTRACT FROM AUTHOR]

In this article, a new dual-permanent magnet spoke-type flux-reversal machine (dual-PM SFRM) for direct-drive applications is proposed. Tangentially magnetized permanent magnets (PMs) sandwiched with iron poles are set in stator slots. To increase the torque density within the geometric restrictions, PMs are introduced in the rotor as well and magnetized radially to form a consequent-pole rotor. Global optimizations are conducted and comparisons are made on torque, torque ripple, and torque/PM volume with the existing single-PM SFRM. It is found that the proposed dual-PM SFRM can produce 22.6% larger torque with an optimal PM volume and a 17.5% larger torque with the same PM volume compared with the single-PM counterpart. Moreover, major magnetic field space harmonics are derived analytically and verified by finite-element analysis (FEA) and the torque components produced by the working harmonics are calculated and compared in terms of different stator/rotor pole number combinations. Comparisons are made on back electromotive force, cogging torque, torque performance, and efficiency between dual-PM SFRM and conventional flux-reversal machine. The influence of different stator configurations, i.e., the slot opening, the iron bridge, and the unequal tooth, on torque performance in the proposed dual-PM SFRM has been studied and highlighted. A prototype has been built and tested to validate the FEA calculations. [ABSTRACT FROM AUTHOR]

A hybrid analytical and lumped-parameter thermal model is proposed in this paper to estimate the transient and steady-state two- and three-dimensional (2/3-D) spatial magnet temperature distributions for an interior permanent magnet synchronous machine (IPMSM). On the basis of a lumped-parameter thermal model (LPTM), the magnet analytical thermal models (ATMs) are synergized to establish the hybrid thermal model. By utilizing the transient or steady-state boundary conditions calculated by the LPTM, the ATMs are obtained by solving the heat conduction equations to estimate the spatial magnet temperature distributions in the 2-D horizontal-vertical and axial-vertical planes, which can also be extended to the 3-D temperature distribution by utilizing the multi-slice method. Meanwhile, the non-uniform magnet eddy current loss is also considered. Finally, both electromagnetic-thermal coupled finite element analysis method and experiments are used for verification based on a totally enclosed IPMSM. [ABSTRACT FROM AUTHOR]

Lumped-parameter thermal models (LPTMs) have been widely used to estimate critical temperatures in permanent magnet synchronous machines (PMSMs). However, in some cases, they may be incapable of predicting the hotspots and even cause temperature misestimation. In this paper, the synergized lumped-parameter and sub-domain thermal models are proposed for surface-mounted PMSMs to track the hotspots in the most vulnerable components, i.e., active/end-windings and rotor magnet. Firstly, the “T-type” elementary network based LPTM is developed to predict the average temperatures in main components and the boundary conditions. Secondly, the boundary conditions are applied to three sub-domain thermal models for the active/end-windings and the rotor magnet to predict the respective hotspots and to further correct the misestimated average temperatures. Finally, the proposed synergized thermal model is verified by the experiments on a prototype surface-mounted PMSM under various load conditions. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) configuration suffers asymmetric electromagnetic characteristics although it saves PM usage. The CP-based stator-PM synchronous machines are investigated in this paper, with particular reference to symmetrical issues. The electromagnetic performances of the CP-based stator-PM synchronous machines are firstly evaluated. Afterwards, the rule of even order harmonics cancellation is presented for different slot/pole number combinations and winding layouts, based on which symmetrical phase flux-linkages can be obtained although the unbalanced magnetic flux naturally occurs. Moreover, based on the three-dimensional finite element analysis, the unipolar end leakage-flux caused by the asymmetric magnetic field is identified, and the risk of the shaft magnetization is revealed. Finally, a pair of prototype machines are fabricated and measured to validate the analyses. [ABSTRACT FROM AUTHOR]

In this article, a simplified three-dimensional (3-D) hybrid analytical thermal model for surface-mounted permanent magnet (PM) synchronous machines is proposed and applied to investigate the influence of PM segmenting strategies on the spatial PM temperature distributions and hotspots. The developed 3-D hybrid thermal model synergies the lumped-parameter thermal model and analytical method and is able to estimate 3-D spatial temperature distributions and hotspots for both unsegmented and segmented surface-mounted PMs accounting for the uneven PM eddy current loss distributions. Meanwhile, by utilizing the proposed matrix-based post-processing methods, the developed hybrid analytical thermal model has a simple mathematical expression but persists in high estimation accuracy. Finally, the proposed hybrid analytical modelling method is validated by 3-D electromagnetic-thermal coupled FEA and experiments. [ABSTRACT FROM AUTHOR]

Asymmetric interior permanent magnet (AIPM) rotor topologies can achieve torque enhancement in IPM synchronous machines without the increase of PM usage due to utilizing magnetic-field-shifting (MFS) effect by reducing the current angle difference between maximum PM and reluctance torque components. This paper investigates the influence of armature reaction on MFS effect in AIPM machines. A general model of IPM machines considering MFS effect is analytically developed and the AIPM and IPM machines using the same stator, rotor diameter and total PM amount are comparatively studied. It shows that the armature reaction affects the MFS effect in both AIPM and IPM machines and the influence is more significant in AIPM machine. The relationships between MFS effects in PM flux-linkage and inductance characteristics and current angles for maximum PM and reluctance torque components are revealed. It confirms that the change of current angles of torque components is due to the MFS effect in PM flux-linkage and inductance characteristics in both AIPM and IPM machines. Besides, the developed machine model considering MFS effect is verified by finite element analysis. Finally, a small-scale AIPM machine prototype is fabricated and measured to validate the finite element analysis. [ABSTRACT FROM AUTHOR]

In this paper, a high-speed permanent magnet (HSPM) motor having 6-slot/2-pole (6s/2p) number combination and 2 coil-pitch windings are developed for domestic appliance application. Two HSPM motors with different layouts of 2 coil-pitch windings are optimized and their electromagnetic performances are evaluated. The best winding configuration is then identified for shorter motor axial length and larger torque density. Since 3-slot/2-pole (3s/2p) HSPM motors with non-overlapping windings have the same winding factor, a comparison between 3-slot and 6-slot motors is also conducted, particularly for torque density, losses, and unbalanced magnetic force (UMF). It shows that 6s/2p PM motors with 2 coil-pitch windings are suitable for high-speed application without UMF and less rotor PM loss. Finite element predicted electromagnetic performances are validated by experiments made on two prototype motors. [ABSTRACT FROM AUTHOR]

Surface mounted permanent magnet Vernier (SPM-V) machines, because of their high torque density and multi-pole structure, are promising candidates for low-speed direct-drive applications. To achieve high torque density, the SPM-V machines are generally designed with high gear ratios. Therefore, their operating frequencies can be much higher than those of the conventional SPM machines. This potentially increases the alternating current (AC) winding losses, especially those with form-wound coils proposed for high-power applications. This article investigates the AC losses (including skin effect, proximity effect, rotor PM induced, and circulating current losses) in form-wound stator coils of a 3 MW direct-drive SPM-V machine with different slot/pole number combinations. The study reveals that the SPM-V machines have significantly higher AC winding losses than their conventional SPM counterparts for similar operating conditions. To reduce the AC winding losses in SPM-V machines, a novel flux shunt concept is proposed along with other conventional techniques such as increasing the number of turns/coil (with terminal voltage being kept constant) and parallel strands/turn, providing extra clearance at slot opening. With the loss reduction techniques implemented, the SPM-V machines can achieve comparable efficiency but much higher torque density than their conventional counterparts. Moreover, the proposed flux shunt was also found to be very effective in reducing the potential risk of permanent magnet (PM) irreversible demagnetization, a key issue for SPM-V machines at high power ratings. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) machines have attracted considerable interest as a means of reducing machine cost through a marked reduction in the volume of PM required to meet a particular torque specification. However, the presence of a large torque ripple that can result from the CPPM structure can hinder their adoption in some applications, especially for the dominant third-order torque ripple. Although several design-specific modifications have been proposed to ameliorate torque ripple, the generalized principles underpinning this behavior have not been fully established. In this article, it will be illustrated that an aggregation of the fluctuations in inductance, back electromotive force, and cogging torque contributes to increased torque ripple. Meanwhile, an asymmetric pole shaping method is proposed to reduce the torque ripple, taking the dominant third-order torque ripple as an example. Both simulated and experimental results of the 12-slot/8-pole prototypes show that compared to the symmetrical pole shaping model and the plain pole model, the proposed asymmetric shaping method is effective in reducing torque ripple. [ABSTRACT FROM AUTHOR]

Consequent pole (CP) permanent magnet (PM) machines offer scope for reducing the quantity of PM material and hence cost compared to more conventional PM machine topologies of the same rating. In this type of machine, the rotor pole arc is usually optimized to realize the largest output torque with pole shaping methods used to reduce torque ripple. However, such approaches tend to be limited by constraints imposed on the pole shapes. It is a common practice to adopt similar PM and iron pole shapes, an approach that does not fully account for the different characteristics of PM and iron poles in CPPM machines, often leading to large even order harmonics in the airgap flux density. This article proposes a shaping method with a variable rotor profile and pole arc span being established by means of optimization by Genetic Algorithm. It is demonstrated that for a fixed quantity of PM material, different PM and iron pole shapes in combination with optimal PM and iron pole arc spans are essential for ensuring both maximum output torque and lower torque ripple when the due account is taken of flux leakage. It also demonstrates that since the flux density in the region under a PM pole is governed by the magnetic potential produced by magnets while it is governed by magnetic reluctance under iron pole, different PM pole and iron pole shapes are necessary to reduce the even-order harmonics in a CPPM machine and consequently to reduce torque ripple. The performances of optimized and more conventional CP machines are compared by finite-element method on 12-slot/8-pole prototype motors. [ABSTRACT FROM AUTHOR]

This article proposes an improved sensorless control method for permanent magnet synchronous machines under phase resistance asymmetry. The proposed method acquires positive sequence current and voltage signals by applying a sequence component extractor and a double synchronous reference frame current control strategy. These signals can, then, be applied to improve the extended electromotive force based sensorless observer to eliminate the undesired second-order fluctuation in position and speed estimation due to asymmetric phase resistances. In addition, the resistance deviations, which may be due to asymmetric resistances and temperature variation, could introduce dc offset error in rotor position estimation. Therefore, a model reference adaptive system based resistance estimation is employed to compensate for inaccuracy of resistances. Moreover, from the information contained in the negative sequence voltages, the specific values of all asymmetric phase resistances can be estimated as well. Experimental and simulation results are provided to validate the proposed method. [ABSTRACT FROM AUTHOR]

This article proposes and investigates two asymmetric consequent-pole hybrid excited flux reversal machine (AS-CP-HEFRM) topologies, which have same numbers of iron poles and permanent magnets (PMs) with concentrated ac and dc windings on each stator pole and a salient pole rotor. If PM number on one stator pole is larger than 1, PMs are magnetized radially in the same direction on one stator pole, while opposite on adjacent stator poles. The phenomenon of the phase shift between the flux linkages of dc and PM excitations in the AS-CP-HEFRMs is revealed for the first time, which will weaken the regulation of dc excitation field to PM produced field. The elimination condition of the phase shift is derived and verified by finite-element analysis in this article, which can be considered as design guidelines in AS-CP-HEFRMs. Airgap magnetic field space harmonics of AS-CP-HEFRM are also investigated and verified by finite-element analyses. Meanwhile, the relationship between the rotor pole number and the stator pole arc (PM ratio) is derived and verified by global optimization based on genetic algorithm for maximum average torque. The influence of stator/rotor pole number combinations is also studied and compared in terms of torque, torque ripple, and flux regulation capability. The torque components produced by airgap magnetic field space harmonics are calculated and compared. A prototype has been built and tested to validate the finite element calculations. [ABSTRACT FROM AUTHOR]

In this article, an online rotor position error correction method is proposed to eliminate the impact of parameter mismatch in sensorless control for dual three-phase (DTP) permanent magnet synchronous machines drives. The rotor position error production mechanism is first derived and shows that the error changes with the trend of current variation when there is a parameter mismatch. Based on this mechanism, by injecting sinusoidal current signals with low frequency and small amplitude into both sets of three-phase windings, the presence of parameter mismatch and its level can be revealed from the corresponding sinusoidal responses of the estimated speed of sensorless observers, which do not depend on the inertia of the machine. Since the amplitudes of these responses decrease as the parameter mismatch level reduces, with the help of the least mean square algorithm, the parameters can be adaptively adjusted to the actual values, and the position error can be thus corrected. Moreover, with the extra freedom of DTP machines, the detrimental effects on torque production due to current signal injections can be eliminated through adjusting the phase between the two injected signals. The effectiveness of the proposed method has been validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

This article proposes a novel asymmetric interior permanent magnet (AIPM) rotor topology that has a mixed V-shape and spoke-type PM configuration, designated as a 1.5-layer PM structure, and asymmetric arrangement of V-shape PMs and asymmetric flux barriers. The AIPM rotor topology is employed for IPM synchronous machines to utilize the magnetic-field-shifting (MFS) effect for increasing average torque by reducing the current angle difference between peak PM and reluctance torque components. Three machines, i.e., the proposed 1.5-layer AIPM, a symmetrical 1.5-layer IPM-I, and a conventional V-shape benchmark IPM-II are designed and optimized using the same stator, rotor diameter, and total PM usage by global parametric optimization considering the mechanical stress. The effect of asymmetric features of the 1.5-layer AIPM rotor design, i.e., asymmetry of V-shape cavity as well as position and dimensions of flux barrier, on maximum torque and open-circuit air-gap field are investigated. The electromagnetic performances of three machines are compared. It confirms that the proposed AIPM machine has the highest maximum torque and the smallest cogging torque simultaneously. It is also revealed that the torque enhancement is achieved by both the 1.5-layer structure and MFS effect. Finally, a prototype of an AIPM machine is manufactured and tested to validate the analyses. [ABSTRACT FROM AUTHOR]

This article investigates the effect of airgap length on the electromagnetic performance of direct-drive surface mounted permanent magnet Vernier (SPM-V) machines with different power ratings. Using 3 kW machine as an example, its performance is comprehensively compared with a conventional SPM machine with the same airgap lengths using two-dimensional finite-element analysis. For each airgap length, the slot/pole number combination for the SPM-V machine is investigated to achieve the optimal performance compared to the conventional SPM machine. In order to make the study more generic, the slot/pole number and the airgap length variations are expressed as normalized pole pitch, i.e., $\overline {{{\boldsymbol{\tau }}_{\boldsymbol{r}}}} $ (ratio of rotor pole pitch to electromagnetic airgap length). The results show that for 3 kW machines, $\overline {{{\boldsymbol{\tau }}_{\boldsymbol{r}}}} $ >2.2 is a good design criterion for the SPM-V machines to achieve higher average torque and efficiency than the conventional SPM machines. In addition, a reasonably good power factor (>0.9 in this case) can be achieved. Although the power factor of SPM-V machines drops significantly at multi-MW power level, i.e., 3 and 10 MW, the criterion $\overline {{{\boldsymbol{\tau }}_{\boldsymbol{r}}}} $ >2.2 still results in achieving a performance closest to their optimal capability. However, when $\overline {{{\boldsymbol{\tau }}_{\boldsymbol{r}}}} $ >2.2, special consideration should be paid to avoid potential irreversible magnet demagnetization at multi-MW power levels. [ABSTRACT FROM AUTHOR]

This article proposes a novel asymmetric interior permanent magnet (AIPM) rotor topology for torque enhancement and torque ripple reduction in IPM synchronous machines. The AIPM rotor structure is featured by a hybrid-layer permanent magnet configuration, i.e., for each pole, a part of PM configuration has one-layer while the other part has two layers. It allows the magnetic-field-shifting (MFS) effect to be utilized by reducing the current angle difference between maximum PM and reluctance torque components, thereby effectively increasing the maximum resultant torque. The proposed AIPM machine and a conventional V-shape IPM machine are designed and globally parametric optimized with the same 24-slot/4-pole stator, rotor diameter, and PM usage. The influence of key rotor geometric parameters of the AIPM machine on torque and open-circuit air-gap magnetic field characteristics are investigated. The comparison of electromagnetic performance confirms that significant torque enhancement and torque ripple reduction in the AIPM machine compared with the conventional V-shape IPM machine and reveals the MFS effect is essential for torque increase. Finally, an AIPM machine is manufactured and tested for validation. [ABSTRACT FROM AUTHOR]

This article investigates the influence of stator slot number on electromagnetic performance of two-pole high speed permanent magnet (HSPM) slotted motors with toroidal (TO) windings. Four two-pole slotted motors with different slot numbers, i.e., 3, 6, 9, and 12, are globally optimised for maximum torque, and their electromagnetic performance are compared, including winding factor, air-gap flux density, back electromotive force, cogging torque, electromagnetic torque, winding inductances, unbalanced magnetic force (UMF), and various loss components. It shows that the six-slot/two-pole HSPM motor with TO windings is eminently suitable for high speed application due to no UMF and easy to realise a modular structure. In addition, TO and tooth-coil windings are compared in the three-slot/two-pole motors, and the results confirm that TO windings are not suitable for use in the three-slot/two-pole HSPM slotted motor due to large airgap field harmonics. Finally, a six-slot/two-pole prototype motor is manufactured and tested to validate the finite element predictions. [ABSTRACT FROM AUTHOR]