Search

The emerging tribovoltaic nanogenerators (TVNGs) has garnered considerable attention in recent years owing to its higher power density, but it is still limited by unstable output, mismatched impedance, and lower charging speed. Herein, a power‐managed GaN‐based TVNG is first proposed and a self‐powered wireless temperature monitoring system (SWTMS) is developed. The energy backflow from transition capacitor to TVNG is effectively suppressed by applying a high‐voltage‐resistant diode. Benefiting from the combination of the maximum power point tracking (MPPT and the buck converter, an autonomous power management unit (PMU) is designed. The internal impedance of TVNG with PMU decreases by ten times and the charging speed of capacitor increases by 7.18 times compared to those without PMU. Moreover, 100 LEDs and six parallel thermohygrometers can be constantly powered. The wireless temperature monitoring in industrial environments without external power supply is demonstrated through the developed SWTMS. This work proposes an effective power management strategy for TVNG with high output voltage, which exhibits great potential to promote the development of self‐powered sensors and Industrial Internet of Things (IIoT). [ABSTRACT FROM AUTHOR]

With the advancement of internet of things and wireless sensing technology, the need for personnel track and position monitoring are greatly increasing. Commercial global positioning system (GPS) and Global system for mobile communications (GSM) position methods cannot meet the demand for low power consumption and three‐dimensional indoor position monitoring. Herein, a self‐powered position monitoring system (SPMS) based on an insole‐type wearable triboelectric nanogenerator (IW‐TENG) and Bluetooth beacon for human kinetic energy harvesting and sustainable position monitoring is proposed. The SPMS consists of an insole‐type wearable triboelectric nanogenerator, an energy management module (EMM), and a Bluetooth low energy (BLE) beacon module. Benefitting from the multilayers structure, a maximum energy of 120 µJ per step can be harvested by the IW‐TENG with EMM for a typical adult. By every 3–4 steps, SPMS can transmit Bluetooth signals to obtain the location information. A single BLE signal transmission consumes only 136 µJ, and the transmission distance can reach 100 m. The SPMS is applied to intelligent attendance in office rooms and shows great prospects in intelligent navigation and trajectory tracking in local area network. [ABSTRACT FROM AUTHOR]

Power management is an efficacious route to promote the development of triboelectric nanogenerators (TENGs), in which the buck switch for efficient energy extraction has always been a challenge. Here, we propose a three-port cantilever buck switch which can autonomously release energy from the TENG in maximum by the generated electrostatic field of the TENG. The influence of closing voltage of the buck switch on different structure parameters has been thoroughly investigated. The U-Q curve indicates that the optimal energy extraction can reach 90.86%, and the matched impedance of the TENG is reduced from 60 MΩ to 470 kΩ. Compared to the output power at matched impedance, the average power managed by this three-port cantilever buck switch is increased by 1.554 times, which can power the Bluetooth device, electronic watch, calculator and thermo-meter. This work has realized ultra-efficient power management of TENG by leveraging an autonomous cantilever buck switch, which can contribute to the efficient utilization of micromechanical energy. • A three-port cantilever buck switch controlled by the electrostatic field of the TENG for its power management is pioneered. • A detailed analysis of the force-electricity conversion process has been conducted. • U-Q curve and P-R curve has been linked to characterize the output efficiency for the first time. [ABSTRACT FROM AUTHOR]