Search

The costs associated with microalgal biomass production can be reduced by leveraging alternative and cheap growth media. Digestate from fermentation reactors is a particularly interesting candidate for use in cultivating mixotrophic species. The aim of the present study was to assess whether pre-digested milk-industry effluent can be harnessed to grow Tetraselmis subcordiformis and produce hydrogen. The experimental series with 25% and 50% effluent in the growth medium performed the best, producing more than 2000 mg VS biomass/dm 3 . The biogas produced in these variants contained over 60% hydrogen. Increasing the effluent in the medium to 75% led to significant deterioration of performance, both in terms of T. subcordiformis biomass growth and biohydrogen production. The highest efficiency of nitrogen and phosphorus removal, respectively 98.1 ± 1.9% and 97.1 ± 1.4%, was observed in the system to which 25% of sewage was introduced. Increasing the share of fermented wastewater directly reduced the efficiency of removing biogenic compounds. A very strong negative correlation was found between initial N-NH 4 in the growth medium and T. subcordiformis biomass production rates (R 2  = 0.9177).

To make microalgae cultivation economically feasible, different waste streams that may serve as cultivation media are being searched for. The aim of this study was membrane filtration of the liquid fraction of digestate (LFD) to produce permeate that will be an effective medium for the cultivation of Chlorella vulgaris. Microfiltration (MF) and ultrafiltration (UF) with ceramic membranes were used in one- and two-stage systems at transmembrane pressures (TMP) of 0.2, 0.3, and 0.4 MPa. The hydraulic capacities of the membrane modules allowed MF at 0.2 MPa to be selected as the most feasible variant of the one-stage variants. The use of MF permeates for microalgae cultivation resulted in the highest biomass yield, due to optimum pH (about 8.8), low color, and high nutrient concentration (about 290 mg/dm 3 of ammonium and about 22 mg/dm 3 of orthophosphates). The high pH (about 9.7) of the UF permeates, which increased the concentration of free ammonia, reduced microalgae growth by 50% compared to the growth noted with the MF permeates. Due to the low nutrient concentration, the use of permeates from the two-stage systems resulted in microalgae growth more than two times lower than the use of MF permeates. Mathematical modeling indicated that the component of the cultivation medium that most significantly affected microalgae growth was the initial ammonium concentration., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

P. subcordiformis is a potentially promising species with commercial, environmental and technological viability for industrial applications. The great potential of these microalgae lies in their fast biomass growth, pollution resistance, and compatibility with different culture media. This study aimed to determine the efficiency of P. subcordiformis biomass production in a medium prepared with water from the Bay of Gdańsk. The tested medium supported high biomass growth rates which reached 317.58 ± 42.31 mgV⁢S/dm3⋅d in the best-performing variant, with a final concentration of 3493.3 ± 465.4 mgV⁢S/dm3⋅d. In the autotrophic culture, nitrogen and phosphorus removal exceeded 98%. Amending the mixotrophic culture with glucose did not affect P. subcordiformis concentrations. However, it did significantly limit the demand for nutrients in the biomass and reduced chlorophyll a production in the cells., Competing Interests: The authors declare no conflict of interest., (© 2022 The Author(s). Published by IMR Press.)

Research to date has mainly focused on the properties and efficiency of the production of selected, individual types of biofuels from microalgae biomass. There are not enough studies investigating the efficiency of the production of all energy sources synthesised by these microorganisms in a single technological cycle. The aim of this research was to determine the possibilities and efficiency of the production of hydrogen, bio-oil, and methane in the continuous cycle of processing T. subcordiformis microalgae biomass. This study showed it was feasible to produce these three energy carriers, but the production protocol adopted was not necessarily valuable from the energy gain standpoint. The production of bio-oil was found to be the least viable process, as bio-oil energy value was only 1.3 kWh/MgTS. The most valuable single process for microalgae biomass conversion turned out to be methane fermentation. The highest specific gross energy gain was found after applying a protocol combining biomass production, hydrogen biosynthesis, and subsequent methane production from T. subcordiformis biomass, which yielded a total value of 1891.4 kWh/MgTS. The direct methane fermentation of T. subcordiformis biomass enabled energy production at 1769.8 kWh/MgTS. [ABSTRACT FROM AUTHOR]

The increasing concentration of anthropogenic CO2 in the atmosphere is causing a global environmental crisis, forcing significant reductions in emissions. Among the existing CO2 capture technologies, microalgae-guided sequestration is seen as one of the more promising and sustainable solutions. The present review article compares CO2 emissions in the EU with other global economies, and outlines EU's climate policy together with current and proposed EU climate regulations. Furthermore, it summarizes the current state of knowledge on controlled microalgal cultures, indicates the importance of CO2 phycoremediation methods, and assesses the importance of microalgae-based systems for long-term storage and utilization of CO2. It also outlines how far microalgae technologies within the EU have developed on the quantitative and technological levels, together with prospects for future development. The literature overview has shown that large-scale take-up of technological solutions for the production and use of microalgal biomass is hampered by economic, technological, and legal barriers. Unsuitable climate conditions are an additional impediment, forcing operators to implement technologies that maintain appropriate temperature and lighting conditions in photobioreactors, considerably driving up the associated investment and operational costs. [ABSTRACT FROM AUTHOR]

Microalgae are considered to be very promising feedstocks for biomethane production. It has been shown that the structure of microalgal cell walls can be highly detrimental to the anaerobic digestibility of biomass. Therefore, there is a real need to seek ways to eliminate this problem. The aim of the present study was to assess the effect of ultrasonic disintegration of Scenedesmus sp. and Pinnularia sp. microalgal biomass on the performance and energy efficiency of anaerobic digestion. The pretreatment was successful in significantly increasing dissolved COD and TOC in the system. The highest CH4 yields were noted for Scenedesmus sp. sonicated for 150 s and 200 s, which produced 309 ± 13 cm3/gVS and 313 ± 15 cm3/gVS, respectively. The 50 s group performed the best in terms of net energy efficiency at 1.909 ± 0.20 Wh/gVS. Considerably poorer performance was noted for Pinnularia sp., with biomass yields and net energy gains peaking at CH4 250 ± 21 cm3/gVS and 0.943 ± 0.22 Wh/gVS, respectively. Notably, the latter value was inferior to even the non-pretreated biomass (which generated 1.394 ± 0.19 Wh/gVS). [ABSTRACT FROM AUTHOR]

Microalgal biomass can be used to derive many different types of biofuels. In order to widely commercialize this technology, its limitations and weaknesses must be eliminated. Many technical and economic issues also need to be clarified and unknowns answered. Microalgae-based technologies have been shown to be versatile, efficient and suitable for practical and commercial use. However, the current technological readiness level (TRL) of most microalgae-based bioenergy production systems precludes their quick and widespread implementation. Their development is limited by a combination of factors that must be precisely identified, after which their negative impact on scale-up prospects can be eliminated or minimized. The present study identifies the main barriers to the development of industrial microalgae-production and microalgae-to-biofuel systems. In addition, it proposes measures and efforts necessary to achieve a higher TRL, which will provide investors with sought-after performance and cost-efficiency data for the given project. The main barriers to the development of microalgae cultivation and processing systems have been identified to include: the complex nature of the cultivation process with multiple variables involved; lack of sufficient data from pilot-scale and near-full-scale plants, which often precludes reliable life cycle assessment (LCA); and insufficient legal assistance, advisory assistance, subsidies and funding for innovative projects. Potential ways of improving performance and competitiveness of microalgae-based systems include: process optimization techniques, genetic engineering, yield improvement through advanced process control and monitoring, use of waste as feedstock and dedicated support programs. The presented summary of the current stage of microalgal biofuel production technology development indicates the directions for further research and implementation work, which are necessary for the final verification of the application potential of these solutions. [ABSTRACT FROM AUTHOR]

Microalgae-based technologies have huge potential for application in the environment sector and the bio-energy industry. However, their cost-efficiency has to be improved by drawing on design and operation data for large-scale installations. This paper presents a technical concept of an installation for large-scale microalgae culture on digestate liquor, and the results of a pilot-scale study to test its performance. The quality of non-treated digestate has been shown to be insufficient for direct use as a growth medium due to excess suspended solids, turbidity, and organic matter content, which need to be reduced. To that end, this paper proposes a system based on mechanical separation, flotation, and pre-treatment on a biofilter. The culture medium fed into photobioreactors had the following parameters after the processing: COD—340 mgO2/dm3, BOD5—100 mgO2/dm3, TN—900 mg/dm3, and TP—70 mg/dm3. The installation can produce approx. 720 kgVS/day of microalgal biomass. A membrane unit and a thickening centrifuge (thickener) were incorporated into the design to separate and dehydrate the microalgal biomass, respectively. The total energy consumption approximated 1870 kWh/day. [ABSTRACT FROM AUTHOR]

The aim of the study was to investigate the potential of microalgal cultivation on anaerobic liquid digestate as a growth medium. The two methods of liquid digestate treatment including centrifugation and distillation and the two algal strains (Chlorella vulgaris and Arthrospira platensis) were compared. Additionally, the volume of the liquid digestate used to prepare the culture medium constituted from 10 to 50% of the medium volume. The study demonstrated that the highest C. vulgaris and A. platensis biomass productions of 2490 mg TS/L and 2990 mg/L, respectively, were obtained by adding 50% of distilled digestate to a growth medium. Regarding centrifuged liquid digestate, only 10% dilution was required to obtain the maximum final biomass concentration. A. platensis removed 81.1% and 66.4% of the total nitrogen from medium prepared on distilled and centrifuged digestate, respectively, while C. vulgaris ensured 64.1% and 47.1% of removal, respectively. The phosphorus removal from both culture media was higher than 94.2% with A. platensis, while it was 70.4% from distilled and 87.4% from centrifuged media with C. vulgaris. The study confirmed a great potential of microalgal biomass production on anaerobic liquid digestate with a high treatment efficiency of digestate. [ABSTRACT FROM AUTHOR]

Biological processes run by microalgae are prospective but still little known methods of hydrogen production. A prerequisite for their increased advancement is the development of economically viable and efficient technologies. The study presented in this manuscript focused on determining the efficiency of biohydrogen production by P. subcordiformis using a culture medium prepared based on natural waters. The rate of P. subcordiformis biomass growth reached 317.6 ± 42.3 mgODM/dm3·d and ensured a biomass concentration of 3493 ± 465 mgODM/dm3. The percentage concentration of hydrogen in the biogas reached 63.2 ± 1.4%, and its production rate ranged from 0.53 ± 0.05 cm3/h to 0.70 ± 0.01 cm3/h. [ABSTRACT FROM AUTHOR]

The study aimed to determine the effectiveness of docosahexaenoic acid (DHA) production by Schizochytrium sp. biomass fed with waste glycerol depending on the concentration of extracellular polymeric substances (EPS) in the culture medium and medium aeration effectiveness. The microalgae from the genus Schizochytrium sp. were proved to be capable of producing EPS composed of glucose, galactose, mannose, fucose, and xylose. The highest EPS concentration, reaching 8.73 ± 0.09 g/dm3, was determined at the stationary growth phase. A high EPS concentration caused culture medium viscosity to increase, contributing to diminished oxygen availability for cells, lower culture effectiveness, and reduced waste glycerol conversion to DHA. The Schizochytrium sp. culture variant found optimal in terms of the obtained technological effects and operating costs was performed at the volumetric oxygen mass transfer coefficient of kLa = 600 1/h, which enabled obtaining dry cell weight (DCW) of 147.89 ± 4.77 g/dm3, lipid concentration of 69.44 ± 0.76 g/dm3, and DHA concentration in the biomass reaching 29.44 ± 0.36 g/dm3. The effectiveness of waste glycerol consumption in this variant reached 3.76 ± 0.31 g/dm3·h and 3.16 ± 0.22 g/gDCW. [ABSTRACT FROM AUTHOR]

Hydrogen is an environmentally friendly biofuel which, if widely used, could reduce atmospheric carbon dioxide emissions. The main barrier to the widespread use of hydrogen for power generation is the lack of technologically feasible and—more importantly—cost-effective methods of production and storage. So far, hydrogen has been produced using thermochemical methods (such as gasification, pyrolysis or water electrolysis) and biological methods (most of which involve anaerobic digestion and photofermentation), with conventional fuels, waste or dedicated crop biomass used as a feedstock. Microalgae possess very high photosynthetic efficiency, can rapidly build biomass, and possess other beneficial properties, which is why they are considered to be one of the strongest contenders among biohydrogen production technologies. This review gives an account of present knowledge on microalgal hydrogen production and compares it with the other available biofuel production technologies. [ABSTRACT FROM AUTHOR]