Search

The tribovoltaic effect can convert semiconductor interfacial frictional mechanical energy into direct current (DC) electricity, but the flexibility and durability of semiconductor materials limit its application in wearable electronic. Herein, a robust flexible textile tribovoltaic nanogenerator is presented based on a 2D dynamic heterojunction of 2H‐MoS2/Ta4C3 (MTNG). During the friction process, a built‐in electric field (Eb) and an additional interfacial electric field (ECE) are generated in a continuous dynamic contact of 2H‐MoS2/Ta4C3, and through the 2H‐MoS2/Ta4C3 dynamic heterojunction, a significant number of electron‐hole pairs are excited and move directionally to generate a DC. The influences of mechanical pressure and sliding speed on output performance of MTNGs are systematically investigated. The MTNGs deliver excellent output power density (39.15 mW m2) and outstanding robustness (43 000 cycles). Ten MTNGs can be connected in series to obtain a DC voltage of 3.3 V and in parallel to obtain a DC current of 75 µA. Furthermore, the MTNGs can effectively power a variety of commercial electronic watches and calculators by harvesting human kinetic energy. A 2D dynamic heterojunction 2H‐MoS2/Ta4C3 DC nanogenerator is described and offers a workable option for the creation of flexible DC power sources and self‐powered wearable electronics. [ABSTRACT FROM AUTHOR]

Based on the coupling effect of contact electrification and electrostatic induction, the triboelectric nanogenerator (TENG) as an emerging energy technology can effectively harvest mechanical energy from the ambient environment. However, due to its inherent property of large impedance, the TENG shows high voltage, low current and limited output power, which cannot satisfy the stable power supply requirements of conventional electronics. As the interface unit between the TENG and load devices, the power management circuit can perform significant functions of voltage and impedance conversion for efficient energy supply and storage. Here, a review of the recent progress of switching power management for TENGs is introduced. Firstly, the fundamentals of the TENG are briefly introduced. Secondly, according to the switch types, the existing power management methods are summarized and divided into four categories: travel switch, voltage trigger switch, transistor switch of discrete components and integrated circuit switch. The switch structure and power management principle of each type are reviewed in detail. Finally, the advantages and drawbacks of various switching power management circuits for TENGs are systematically summarized, and the challenges and development of further research are prospected. [ABSTRACT FROM AUTHOR]

A series of direct‐current tribovoltaic nanogenerators (TVNGs) with high current density have been developed for energy harvesting and mechanical sensing recently, but the lead wires that need to be connected to two relatively moving parts have greatly restricted the application of TVNG. Herein, a freestanding‐mode TVNG (FTVNG) is proposed based on metal, p‐type silicon (p‐Si), and n‐type silicon (n‐Si). As the freestanding part of metal simultaneously rubs against p‐Si and n‐Si, opposite direct current (DC) outputs can be generated, thus forming a DC output from p‐Si to n‐Si in the external circuit. Resulting from the distinctive structure, FTVNGs are applicable for harvesting energy from moving objects without attached wires. Additionally, by using steel needles to precisely control the actual contact area, the electrical output characteristics and influence laws of the tribovoltaic effect under different working parameters such as area and speed are studied. Moreover, FTVNG is integrated into the traditional rolling bearing as a triboelectric bearing, realizing energy recovery from the rotational motion of mechanical parts and speed sensing, which demonstrates the great application potential of TVNG in basic components and parts. [ABSTRACT FROM AUTHOR]