Search

This study aims to formulate semi-empirical processing applied to analyze simulated and experimental scattering spectra on pipeline samples for estimating the intensity of the single scattering component for the Compton scattering technique. Firstly, a procedure has been developed based on probability density functions of each scattering component, which are obtained by GEANT4. Secondly, sixteen targets are simulated with MCNP6 to validate the proposed procedure. It is shown that the relative deviation for all samples is under 3%. Thirdly, the nine calculated thickness of pipeline samples is determined with a maximum relative deviation lower than 5% in comparing to calibration thickness. [ABSTRACT FROM AUTHOR]

This study suggests an improved X-ray inspection method to determine the effective atomic number to identify explosives during luggage inspection with high resolution of the effective atomic number (Z eff). To obtain high resolution in Z eff , the suggested inspection method uses the ratio of the total and Compton scattering attenuation coefficients between two different energies for decomposing the attenuation coefficients of the Rayleigh scattering and photoelectric absorption that are highly dependent on the atomic number. To acquire the total and Compton scattering coefficient ratio of two different energies, dual-energy X-ray beams and four detectors for the photons transmitted and scattered in three different angles were introduced. MCNP6 simulations were carried out for several materials with X-ray source spectra from a tungsten anode generator to show the effectiveness of the method. The estimated Z eff values with the line beam assumption showed good agreement with the reference values for explosive substances within a relative error of 3% while the additional simulation considering beam width showed increased errors that are acceptable for beam widths less than 1.5 mm. • An improved method for determining effective atomic numbers of explosives is suggested. • The separation of the photoelectric and Rayleigh components led to improved accuracy. • High accuracy of new method for explosives was shown from Monte Carlo simulations. [ABSTRACT FROM AUTHOR]