Search

Purpose: The aim of this study is to evaluate the relationship between the inclination/impaction depth and root proximity to the inferior alveolar canal/lingual plate on a millimeter scale using CBCT scans., Methods: 340 CBCT scans of the mandibular third molar (M3) of 219 patients were evaluated for this cross-sectional study. After adjustment of the 3D orientation of the individual's jaws, the study variables including the angulation between M3 and second molar (M2)/occlusal plane (OP), and the distance of mesial (M)/distal (D) roots of M3 from the inferior alveolar canal (IAC) and lingual plate (LP) were measured. Winter's classification was used for the specification of teeth angulation. The vertical position of each M3 was then evaluated using the 3D view window (based on Pell & Gregory classification). The Spearman correlation coefficient was used for reporting the correlation between quantitative variables. The One-way ANOVA test and the Welch analysis were used for inter-group comparisons. Finally, a multivariant analysis of variances was performed., Results: Most third molars had a mesioangular inclination (52.1%), and vertical inclination (25.9%) was in second place. There was no significant correlation between angulation and age or the D/LP. A strong positive correlation between M3:M2 and M3:OP was observed (0.983). Furthermore, there was a weak negative correlation between M/IAC or M/LP and angulation (- 0.16 and - 0.13, respectively). Concerning Winter's classification, the relationship between D/IAC and angulation was statistically significant (P = 0.003). Furthermore, teeth in position A had lesser inclination compared to those with B or C positions. Multivariate analysis revealed that there was no statistically significant relationship between particular combinations of inclination-impaction depth and proximity of the M3 roots to the IAC or LP (P = 0.211)., Conclusions: The findings of the current study revealed that there is a strong correlation between M3:M2 and M3:OP. The D/IAC was the only variable that had a significant relationship with the angulation of these teeth. Moreover, the roots of horizontally inclined teeth with position A were the closest to the LP and the farthermost to the IAC., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Simple bone cysts (SBCs) are nonneoplastic intraosseous cavities without an epithelial lining, surrounded by bony walls and either empty or containing liquid and/or connective tissue: they were first described in 1929 as a distinct entity of disease. The characteristic that distinguishes SBCs from true cysts is the absence of epithelial lining, that allow us to regard SBCs as pseudocysts.In the literature, SBCs have been referred to as solitary bone cysts, idiopathic bone cysts, unicameral cysts, traumatic bone cysts, hemorrhagic bone cysts, primary bone cysts, and extravasation cysts.The pathogenesis of SBC remains uncertains. Radiographically, SBCs usually present as isolated unilocular radiolucencies with well-defined borders. When SBC extends to the interdental bone, the characteristic radiographic “scalloping effect” can be observed. The differential diagnosis includes apical periodontitis, odontogenic keratocyst, central giant cell granuloma, ameloblastoma, odontogenic myxoma, and central and neurogenic neoplasms.Surgery (curettage) is the gold standard treatment as it allows both diagnosis and treatment by generation of a blood clot in the vacant cavity of SBCs: bone usually regenerates progressively within 6–12 months. Recurrence rate is almost negligible.The aim of the present article is to present and discuss the diagnosis and management of a case of SBC.

Background: Odontomas are among the most common odontogenic tumors and are generally considered as hamartomatous odontogenic lesions. These tumors can be histopathologically divided into complex odontomas and compound odontomas based on their composition. Odontomas show a slow growing behavior and typically lack characteristic symptoms. The standard surgical treatment for large odontogenic tumors is a mandibular (continuity) resection followed by primary or secondary plastic reconstruction. Case Report: A 22-year-old male presented to the Department of maxillofacial surgery with an increasing feeling of pressure in the left mandible. An orthopantomogram revealed a large complex odontoma rg 038. Instead of mandible continuity resection an alternative minimally invasive technique/approach (intraoral) with a trapezoidal bone flap for the enucleation of an odontoma of the mandibular angle with subsequent flap reimplantation and osteosynthesis was performed. Conclusion: Surgical enucleation of large mandibular odontoma with a continuity resection through an extraoral approach represents the surgical standard treatment of this entity. The present case report describes an alternative minimally invasive technique/approach. This technique may reduce surgical risks of the continuity resection through an extraoral approach (nerve damage, scarring) and can improve the long-term stability of the mandible by bone preservation. [ABSTRACT FROM AUTHOR]

Background: Patients presenting with partially impacted lower third molars (M3) have a higher likelihood of experiencing angle fractures while simultaneously decreasing the risk of condylar fractures. However, the specific biomechanical mechanism responsible for this occurrence remains unclear. Moreover, there is an ongoing debate regarding whether the removal of M3s might actually increase the risk of condylar fractures. This study aimed to evaluate how the presence of M3s influences mandibular fractures resulting from blows to the symphysis and lateral mandibular body, and to determine the indication for extracting M3s in such cases. Methods: Models of the mandible with a partially M3-impacted model (M3I), M3-extracted model (M3E), and M3-absent model (M3A) were generated using a computer. A traumatic blown force of 2000 N was applied to the symphysis and the right body of the mandible. Von Mises and principal stresses were analyzed, and failure indexes were determined. Two cases of mandibular linear fractures were chosen for model verification and interpretation. Results: When force was applied to the symphysis, the condylar region exhibited the highest stress levels, while stress in the mandibular angle region was much less regardless of the M3 state. On applying the force to the right mandibular body, stress in the condylar region decreased while stress in the mandibular body increased, especially in the blown regions. Impacted tooth or cavity formation post-M3 extraction led to uneven stress distribution on the blown side of the mandible, increasing the risk of mandibular angle fractures. In cases where M3 was absent or the extraction socket had healed, stress from lateral traumatic blown force was evenly distributed along both the inner and outer oblique lines of the mandible, thereby reducing the risk of mandibular fractures. Conclusions: The reduced risk of condylar fractures in patients with partially impacted lower M3s and mandibular angle fractures is mainly due to lateral blows on the mandible, which generate less stress in the condylar region than blows on the mandibular symphysis, rather than being caused by the M3 itself. Extraction of the lower M3 can decrease the risk of mandibular fractures, with a minor influence on condylar fractures. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Prevention & Treatment For Stomatological Diseases is the property of Journal of Prevention & Treatment For Stomatological Diseases Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Desmoplastic fibroma (DF) is an uncommon bone tumor that originates from the mesenchymal tissue and despite being benign, exhibits aggressive behavior locally. The following report describes the case of a 7-year-old boy with a rapidly enlarging swelling on the right side of the mandible. After a thorough clinical examination, radiographic imaging, and histopathological analysis, the diagnosis of DF was confirmed. Treatment planning was formulated considering both the tumor's tendency for local recurrence and the patient's well-being. Due to the patient's young age, segmental resection was not deemed appropriate, and an aggressive curettage and enucleation of the lesion followed by the bone graft was performed instead. The patient was kept under close follow-up for the first month of post-surgery and later reviewed after 3, 6, 9, and 12 months, respectively. Good bone healing was observed on radiographs. The patient did not show any signs of recurrence based on clinical or radiographic assessments and did not exhibit any neurosensory deficits as well. [ABSTRACT FROM AUTHOR]

Background: The aim of our study is to evaluate the postoperative complications after the extraction of impacted third molar teeth and to investigate the effects of these complications on the quality of life of patients. Methods: Demographic, clinical, and radiological evaluations were conducted, covering factors like age, gender, and tooth position. Clinical measurements, pain and edema assessments, and quality of life evaluations through OHIP-14 scores were performed. Preoperative and postoperative mouth opening, trismus, alveolitis and dehiscence were evaluated. Results: A total of 100 patients were included in our study. No significant gender-based differences were found in measurements, pain, or swelling. There was no statistically significant difference between the preoperative and postoperative results of difference A-C, difference B-E, difference A-D, and difference mouth opening. Procedure duration correlated positively with age, alveolar osteitis, trismus, and swelling. Postoperative quality of life, assessed by OHIP-14, demonstrated a negative correlation with age and trismus. It was observed that the gender and the tooth positions of the patients had no effect on the severity of postoperative pain and edema. Conclusions: As the age of the patients increases and the duration of the procedure increases, the rate of postoperative complications increases and it is concluded that the quality of life decreases significantly. [ABSTRACT FROM AUTHOR]

Background: Dentigerous cyst are most common odontogenic cyst and they frequently occur at the mandibular third molar. Their asymptomatic long medical history always resulted in severe bone resorption at the distal aspect of the adjacent second molar. BonMaker® ATB demonstrate an excellent autogenous bone graft candidacy. The aim of this study is to share a single team's experience of dentigerous cyst osseous defect repairing by applying autogenous tooth sticky bone graft. Method: In total, 18 patients with dentigerous cyst, which was arised from mandibular third molar unilaterally, were enrolled in this study. Enucleation of dentigerous cyst was performed extracting with involving teeth under general anesthesia. Autogenous tooth sticky bone graft was prepared using extracted tooth and autogenous fibrin glue. Subsequently, grafting was performed above covering with concentrate growth factors. Patients were followed up at sixth months. Results: They were eleven male and seven female patients. Their ages ranged from 20 to 40 years, with a mean of 31 years. Primary wound healing of all sites was achieved in all the patients. Sixth months postoperative radiographic assessment show that dentigerous cysts osseous defects of seventeen patients were good bone filling and ossification. One patient occurred slight bone resorption at the distal aspect of the adjacent second molar. Conclusion: Within the limitation of sample size and retrospective nature of the present study, autogenous tooth sticky bone graft demonstrates one of the best alternative alveolar bones repairing graft. [ABSTRACT FROM AUTHOR]

Ameloblastoma is a benign epithelial tumor that has aggressive, destructive and unlimited growth potential, having the capacity for recurrence and malignant transformation. Regarding the symptoms and clinical signs, the presentation of ameloblastoma is poor. In children and young people, ameloblastoma can be difficult to diagnose, because it mimics other benign lesions. Its diagnosis requires a combination of imaging data, histopathological analysis and molecular tests. The methods of treatment consist of radical surgery (segmental resection) and conservative treatments (enucleation with bone curettage). The particularity of the presented case is represented by the late request for medical consultation, a direct consequence of the measures implemented to prevent and control the spread of COVID-19. [ABSTRACT FROM AUTHOR]

Purpose: The present three-dimensional (3D) finite element analysis (FEA) was aimed to assess the biomechanical effects and fracture risks of four different interforaminal implant-prosthodontic anchoring configurations exposed to frontal trauma. Material and methods: A symphyseal frontal trauma of 1 MPa was applied to four dental implant models with different configurations (two unsplinted interforaminal implants [2IF-U], two splinted interforaminal implants [2IF-S], four unsplinted interforaminal implants[ 4IF-U], four splinted interforaminal implants [4IF-S]. By using a 3D-FEA analysis the effective cortical bone stress values were evaluated in four defined regions of interest (ROI) (ROI 1: symphyseal area; ROI 2: preforaminal area; ROI 3: mental foraminal area; and ROI 4: condylar neck) followed by a subsequent intermodel comparison. Results: In all models the frontal traumatic force application revealed the highest stress values in the condylar neck region. In both models with a four-implant configuration (4IF-U, 4IF-S), the stress values in the median mandibular body (ROI 1) and in the condylar neck region (ROI 4) were significantly reduced (P <0.01) compared with the two-implant models (2IF-U, 2IF-S). However, in ROI 1, the model with four splinted implants (4IF-S) showed significantly (P < 0.01) reduced stress values compared to the unsplinted model (4IF-U). In addition, all models showed increased stress patterns in the area adjacent to the posterior implants, which is represented by increased stress values for both 2IF-U and 2IF-S in the preforaminal area (ROI 3) and for the four implant-based models (4IF-U, 4IF-S) in the mental foraminal area. Conclusion: The configuration of four splinted interforaminal implants showed the most beneficial distribution of stress pattern representing reduced stress distribution and associated reduced fracture risk in anterior symphysis, condylar neck and preforaminal region. [ABSTRACT FROM AUTHOR]

Copyright of Avances en Odontoestomatologia is the property of Ediciones Avances SL and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Peripheral giant cell granuloma (PGCG) is an asymptomatic, non-neoplastic, and proliferative lesion of unknown etiology. Possible pre-disposing factors, such as hormonal changes during pregnancy, have been suggested. However, the association between PGCG and pregnancy is controversial. There are few reported clinical cases of pregnancy-associated PGCG in the literature, and they occurred only in the lower jaw. The present report is on a 35-year-old female patient at 36 weeks of gestation who presented with a PGCG in the central and lateral incisors of the upper jaw. Management consisted of complete surgical excision of the lesion along with a margin of healthy tissue under local anesthesia, followed by curettage of the adjacent fibers of the affected bony wall. The patient experienced adequate healing without complications. The diagnosis of PGCG was based on clinical characteristics, imaging examinations, and histopathological confirmation. The patient underwent postoperative follow-up evaluations at 3, 6, and 12 months, and there were no signs of recurrence. [ABSTRACT FROM AUTHOR]

A 3-year-old patient sustained a tripartite mandibular fracture, including bilateral condylar fractures with lateral dislocation of the left condyle and symphyseal fracture. Staged lower jaw reconstruction with closed reduction of the laterally dislocated condyle, transfacial pinning between the mandibular angles, MMF using circummandibular wiring and intermaxillary fixation screws was performed. [ABSTRACT FROM AUTHOR]

Traumatic brain injuries (TBIs) associated with maxillofacial fractures (MFFs) are a public health concern worldwide, especially among adult-aged males. There is an urgent need for early detection of associated TBIs in patients with MFFs during the initial assessment and treatment stage to reduce morbidity and mortality. The objective of the present study was to systematically review the literature to determine specific MFF situations associated with TBIs and to identify the factors associated with TBIs in patients with MFFs. The protocol was developed in accord with the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocols (PRISMA-P) and was registered to the International Prospective Register of Systematic Reviews (PROSPERO) under the registration number CRD42020155912. Overall, of 26,774 patients recorded, 13,667 patients (51.04%) sustained MFFs with an associated TBI. The male to female ratio was 4.8:1. RTA was the most common cause. The most common TBIs were concussions, contusions, and closed brain injuries. Within the limits of this study, it was concluded that TBI-related MFFs should be suspected whenever maxillary or mandibular bone fractures occur, especially among adults, males, and people with injuries caused by RTAs and assaults. There is a need to increase the awareness of maxillofacial surgeons on the possible associations of combined maxillofacial trauma and brain injuries. [ABSTRACT FROM AUTHOR]

Background: Kissing molars (KMs) is defined as a state in which the apex of two impacted molars face opposite directions and the occlusal surfaces touch each other and the crown is in one follicle. Class III KMs have been reported previously; however, reports on class III KMs in young people (< 18 years of age) are limited. Case presentation: Here, we present the case of KMs class III confirmed at an early age, supported by a review of the literature. The patient was a 16-year-old female and experienced discomfort in the left molar of the lower jaw and visited in our department. We diagnosed KMs based on an impacted teeth on the buccal side, near the lower jaw wisdom teeth, and a cyst-like low-density area observed around the crown of both teeth, as revealed by computed tomography. We decide to extract the tooth and enucleate the cyst under local anesthesia as the patient experienced discomfort due to occlusion. Furthermore, the cyst-like structure removal and tooth extraction including tooth root were necessary as the patient had KM class III, possibly inducing complicated malocclusion. Although no previous reports recommended timing for KMs tooth extraction, we propose that extraction at an early stage is important regardless of age especially in class III cases. Conclusions: We report a case of KM class III detected at an early age. [ABSTRACT FROM AUTHOR]

Purpose: The glandular odontogenic cyst (GOC) is considered a rare developmental cyst, with an odontogenic origin and both epithelial and glandular characteristics, with less than 200 reported cases in the literature. Methods: In the present case, a 29-year-old man was referred for evaluation of an asymptomatic slow-growing swelling in the anterior region of the mandible, with one-year history. The patient's medical history did not reveal any systemic alteration. The extraoral examination did not show enlargement of the facial contour and the intraoral examination showed vestibular and lingual swelling. Panoramic radiography and CT scan revealed a well-defined unilocular radiolucent lesion involving the inferior incisors and canines bilaterally. Results: Histopathological analysis revealed multiple cysts lined by stratified epithelium with varying thickness and characteristics, in addition to duct-like structures filled with PAS-positive amorphous material, suggestive of GOC. Conservative treatment was performed through surgical curettage, peripheral ostectomy of the surgical site and apicectomy of the teeth involved in the lesion. There was one recurrence, which was detected in postoperative follow-up, leading to a new surgical approach. Conclusions: Fifteen months after the second procedure, no signs of recurrence were identified, and bone neoformation within the surgical site occurred, supporting that a conservative approach for the treatment of GOC is viable. [ABSTRACT FROM AUTHOR]

Virtual surgical planning for CAD/CAM mandibular reconstruction by titanium prosthesis was recently reported for resected cases. Even if some advantages are evident, difficulties that may arise for TMJ function after reconstruction originate from prosthesis contamination through oral mucosa dehiscence. In these two cases reported of mandibular reconstruction after resection of ameloblastoma by custom-made CAD/CAM titanium prosthesis, the procedures were aimed to preserve the TMJ glenoid cavity and articular disc avoiding functional problems for hemi-mandibular resections that included the condyle (as in case #1) or with condylar preservation (as in case #2) and avoiding intraoral incisions in both cases. The entire surgical planning and prosthetic fabrication were explained with specifications and the sequence of the surgical procedure. Finite elements analysis (FEA) was performed to check the force distribution and efficacy of the prosthetic device (case 1 with hemi-mandibular resection and rehabilitation). Although successful in these two cases, surgical reconstruction of the mandibular defect after resection by a CAD-CAM custom-made prosthesis still shows some drawbacks and failure risks. Several advantages of this technique and the surgical success in these two cases were presented, but limitations and side effects must be considered when cases are selected. [ABSTRACT FROM AUTHOR]

This retrospective study aimed to evaluate a possible correlation between the characteristics of the mandibular ramus and lower third molar impaction by comparing a group of subjects with an impacted lower third molar and a second group with normal eruption for an early prediction of this pathology. This comparison was made using linear and angular measurements, which were taken on digital panoramic radiographs. Materials and methods: A total of 726 orthopantomographs (OPT) were examined, and 81 were considered suitable for the present study. The results were divided into two groups: a control group and an experimental group. The control group comprised 38 cases in which patients had at least one lower third molar that had erupted, and the experimental group comprised 43 cases in which patients had at least one lower third molar that was impacted or partially impacted. In total, 16 variables (11 linear, 4 angular, and 1 ratio) were determined and measured by an experienced observer. Results: The control group had a larger retromolar space, a larger impaction angle and a higher ratio of retromolar area to the third molar, compared to the experimental group. In contrast, the experimental group showed a deeper sigmoid notch depth than the control group did. In the control group, moderate positive correlations were found between both the length of the coronoid and the width of the third molar, and the retromolar space. Furthermore, in the experimental group, moderate positive correlations were found between both the angular condyle–coronoid process and the inclination of the lower posterior teeth, and the retromolar space. Conclusion: this study showed that the angle of a lower third molar, in relation to mandibular pain, can be an index for predicting tooth inclusion. [ABSTRACT FROM AUTHOR]

Featured Application: Virtual Surgical Planning in Cranio-Facial Traumatology. Atrophic edentulous mandible fractures are a challenge for maxillo-facial surgeons because of low vascularization, low bone regeneration, and lack of occlusion. Whereas occlusion is the main guide in the reduction of mandibular fractures, the aim of our study is to show the advantages of using virtual surgical planning (VSP) in surgery when the occlusal guide is absent. This work is a prospective study that shows the in-house digital workflow for the management of these fractures in the Maxillo-Facial Surgery Unit of Federico II University Hospital of Naples. Four patients who satisfied the criteria were included in the study. For each patient, the same defined CAD/CAM-based was applied. The workflow followed four steps: (1) bone segmentation and virtual reduction of fracture fragments; (2) three-dimensional printing of virtually reduced mandible and modelling of 2.4 reconstruction plate on printed resin model; (3) surgery aided by the pre-formed plate; (4) digital and clinical outcomes analysis. In the last step, a distance colour map was conducted to compare the virtual planning and postoperative CT outcome. In all cases, the discrepancies values between the two images were lower than 1.5 mm, and good clinical outcomes in terms of facial symmetry, absence of sensory disturbance, and possibility of prosthetic rehabilitation were obtained. In conclusion, the VSP, with our in-house workflow brings benefits in the management of atrophic edentulous mandible fractures in terms of the high accuracy of bone repositioning. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to perform a retrospective analysis of the prevalence, etiologies, types of maxillofacial injuries (MFIs), sites of maxillofacial fractures (MFFs) and their management in Yerevan, Armenia. Methods: A retrospective cross-sectional study was conducted. The extracted data included age, sex, date of referral, mode of injury, etiology, radiology records and treatment methods. Study outcomes were measured using percentages, means, standard deviations and tests of proportions. P <.05 was considered significant. Results: A total of 204 patients had a mean age of 36.26 ± 1.08 years (156 males and 48 females), and a total of 259 MFIs were recorded between 2017 and 2020. Interpersonal violence was found to be the most common etiology of MFFs in this study (42.1%), followed by road traffic accidents (RTAs) (27.9%) and falls (18.6%). The nasal bone was the most common injury site (47.5%), followed by the mandible (31.4%) and zygomatic complex (11.7%). The most common fracture site was the mandibular angle (37.9%), followed by the symphysis/parasymphysis (28.1%) and body (12.6%). Isolated soft tissue injuries were reported in 5.9% of the cases. The majority of MFFs were treated by open reduction and internal fixation. Conclusion: Interpersonal violence, followed by RTAs and falls, was the most common cause of MFIs. Males in the 21–30 years age group had the highest MFI incidence rate. The nasal bone was the most common injury site, followed by the mandible and zygomatic complex. Social education with the objective of reducing aggression and interpersonal conflict should be improved, and appropriate RTA prevention strategies should be strengthened and implemented. [ABSTRACT FROM AUTHOR]

The purpose of this study is to evaluate the degree of spontaneous bone healing after cyst enucleation as well as its contributing factors. Pre- and post-operative computed tomography (CT) scans of consecutive patients who had undergone jaw cyst enucleation were retrospectively analyzed. The outcome variable was healing ratio, which was calculated using the volume of the cyst before surgery and the volume of the defect in the bone after surgery. Predictor variables including duration of observation, pre-operative cyst size, age, gender, and involved jaw were analyzed to determine their influence. Forty-four subjects (30 Male and 14 Female, average 40.7 ± 15.7 years) were included in this study. Healing ratio was significantly lower during the first year (33.5 ± 32.8%) compared to the second (74.5 ± 24.2%) and subsequent years (74.2 ± 17.8%). In 35 patients who had follow-ups of over 1 year, the healing ratio was not affected by the pre-operative cyst size and upper/lower jaw except gender (p = 0.037, female > male) and age (p = 0.021, younger than 30 years > 30 years and older). The residual defect was significant larger in cysts 3 cc or larger (1.64 ± 1.54 cc) compared to smaller cysts (0.43 ± 0.42 cc, p = 0.006). The residual defect volume of large cysts was similar to those of the pre-operative volume of small cysts (1.47 ± 0.72 cc). In conclusion, spontaneous bone healing ratio of post-enucleation defects was about 73.5% after 12 months. Large cysts (> 3 cc) had larger defect, comparable to the volume of small cysts, but with altered contour. Additional treatment such as a bone graft may be considered especially in large cysts. [ABSTRACT FROM AUTHOR]

Background and Aim: Odontoma is an asymptomatic, slow-growing odontogenic tumor. It is usually found accidentally in the maxilla or mandible on radiographs or when it deforms adjacent teeth. It is most commonly seen in patients 30 years of age or younger. Case Report : A 56-year-old man with a dentigerous cyst associated with complex odontoma in the incisive canal region. The patient was referred with slight swelling in foramen incision area. Under general anesthesia, the cyst was completely excised with excisional biopsy along with dental mass and during pathology evaluation, dentigerous cyst associated with complex odontoma was diagnosed. Conclusion: When surgeons encounter a patient with an odontogenic tumor, even if the patient is old, the odontoma should be placed in a differential diagnosis. [ABSTRACT FROM AUTHOR]

Background: Autogenous bone grafts remain the "gold standard" in maxillofacial reconstructive procedures. The objective of this study was to evaluate the proximal tibia as a donor site of cancellous bone for bone grafting procedures of the mandible on the basis of intraoperative parameters and clinical observations. Methods: The study was based on a medical record search of 40 patients who underwent surgical procedures because of benign pathological lesions of the jaws resulting in 3-wall bone defects of the mandible and qualified for surgical removal of the lesion with simultaneous bone grafting of the defect with autogenous cancellous bone harvested from the proximal tibia. Results: The use of the proximal tibia for bone grafting procedures enables large amounts of cancellous bone (15.09 cc in average) to be obtained. The procedure is characterized by a low risk of early and late complications, which include excessive bleeding, wound infection, lengthy healing time, scars, a loss of sensation around the scars, aching, a dip in bone, swelling and tenderness. Conclusions: The ability to obtain large amounts of cancellous bone and a low risk of intra- and postoperative complications make the proximal tibia an attractive donor site for the bone grafting procedures in maxillofacial surgery. [ABSTRACT FROM AUTHOR]

Background: Alveolar bone plays a vital role in mastication and supporting the teeth. The alveolar process is one of the most challenging regions of facial bone to reconstruct due to the deformity involves both hard and soft tissues. However, the etiology, gender, and age distribution vary between different regions, cultures, and countries. This study aims to investigate the prevalence of alveolar trauma in Shahid Rajaee Hospital, Shiraz, Iran, for three years. Methods: In a retrospective cross-sectional study, patients with alveolar fractures referred to Shahid Rajaei Hospital in Shiraz were included in the study. Age, sex, site of alveolar fractures, and etiology factors of trauma explored. The collected data was analyzed by SPSS software. Mean ± SD calculated for the inferential statistics, and the data compared using Chi-square and Exact Fisher. A p-value of < 0.05 was considered statistically significant with a 95% reliability. Results: A total of 165 patients had alveolar fractures in this study. We found that the most common cause of alveolar fracture was road accidents (32.3%) and the lowest reason was violence (9%). Most people with alveolar trauma were male and in the 21–30 years. The prevalence of mandibular and maxillary alveolar fractures was 17.61 and 17.01%, respectively, with the most anterior area of injury. Conclusion: Alveolar trauma is one of the most common injuries among trauma patients. Early diagnosis and treatment plans are necessary to reduce the complications of facial trauma. Early training for a young adult is essential to prevent the severity of trauma. [ABSTRACT FROM AUTHOR]

Accurate evaluation, diagnosis, and management of mandibular fractures is essential to effectively restore an individual's facial esthetics and function. Understanding of surgical anatomy, fracture fixation principles, and the nuances of specific fractures with respect to various patient populations can aid in adequately avoiding complications such as malocclusion, non-union, paresthesia, and revision procedures. This article reviews comprehensive mandibular fracture assessment, mandibular surgical anatomy, fracture fixation principles, management considerations, and commonly encountered complications. In addition, this article reviews emerging literature examining 3-dimensional printing and intraoperative imaging. [ABSTRACT FROM AUTHOR]

Featured Application: Mandibular marginal resection is the usual choice when treating cases of stage 3 medication-related osteonecrosis of the jaws (MRONJ) in order to achieve healing. Here, we present two cases in which treatment was performed using virtual surgical planning and CAD/CAM to produce surgical guides and reconstruction plates, and evaluate their outcome from clinical and radiographical standpoints. Background: Marginal mandible resection is required to achieve healing in some cases of medication-related osteonecrosis of the jaws (MRONJ). Despite the sparsity of the literature, computer-aided design/computer-aided manufacturing (CAD/CAM) materials may provide superior outcomes for patients with an increased risk of mandible fracture. The aim of this study was to report a digital workflow for surgical interventions to prevent mandible fracture in MRONJ patients. Methods: We present two cases in which virtual surgical planning (VSP) and CAD/CAM surgical guides and reconstruction plates were used to prevent mandible fractures in elderly MRONJ patients submitted for marginal resection. Two osteoporotic patients, aged 73 and 84 years, presented with stage 3 MRONJ of the right mandibular body with inferior alveolar nerve involvement. The unaffected bone height was 6 mm in both cases, implying a high risk of mandible fracture. After preoperative VSP, surgery was performed through a combined intraoral–transbuccal approach. CAD/CAM-customized cutting guides and reconstruction plates were used for the marginal resection of necrotic bone and internal fixation. Results: Complete healing was achieved and the patients remained asymptomatic up to 1 year post-surgery. Conclusions: VSP and CAD/CAM-customized materials facilitated the complete resection of necrotic bone and rigid fixation in MRONJ patients, allowing a simplified approach with shorter operative times, reduced morbidity, and predictable results. [ABSTRACT FROM AUTHOR]