Search

Lithium-metal batteries have attracted extensive research attention because of their high energy densities. Developing appropriate electrolytes compatible with lithium-metal anodes is of great significance to facilitate their practical application. Currently used electrolytes still face challenges of high production costs and unsatisfactory Coulombic efficiencies of lithium plating/stripping. In this research, we have developed a diluted electrolyte which is compatible with both lithium-metal anode and sulfurized polyacrylonitrile cathode. It presents a very high Li plating/stripping Coulombic efficiency of 99.3% over prolonged cycling, and the as-assembled anode-free Li-S battery maintains 71.5% of the initial specific capacity after 200 cycles at 0.1 A g−1. This work could shed light on designing a low-cost and high-performance liquid electrolyte for next-generation high-energy batteries. [ABSTRACT FROM AUTHOR]

Rechargeable room‐temperature sodium–sulfur (RT Na–S) batteries are a promising energy storage technology, owing to the merits of high energy density and low cost. However, their electrochemical performance has been severely hindered by the poor compatibility between the existing electrolytes and the electrodes. Here, we demonstrate that an all‐fluorinated electrolyte, containing 2,2,2‐trifluoro‐N,N‐dimethylacetamide (FDMA) solvent, 1,1,2,2‐tetrafluoroethyl methyl ether (MTFE) anti‐solvent and fluoroethylene carbonate (FEC) additive, can greatly enhance the reversibility and cyclability of RT Na–S batteries. A NaF‐ and Na3N‐rich cathode electrolyte interphase derived from FDMA and FEC enables a "quasi‐solid‐phase" Na–S conversion, eliminating the shuttle of polysulfides. The MTFE not only reduces polysulfide dissolution, but also further stabilizes the Na anode via a tailored solvation structure. The as‐developed RT Na–S batteries deliver a high capacity, long lifespan, and enhanced safety. [ABSTRACT FROM AUTHOR]

Rechargeable room‐temperature sodium–sulfur (RT Na–S) batteries are a promising energy storage technology, owing to the merits of high energy density and low cost. However, their electrochemical performance has been severely hindered by the poor compatibility between the existing electrolytes and the electrodes. Here, we demonstrate that an all‐fluorinated electrolyte, containing 2,2,2‐trifluoro‐N,N‐dimethylacetamide (FDMA) solvent, 1,1,2,2‐tetrafluoroethyl methyl ether (MTFE) anti‐solvent and fluoroethylene carbonate (FEC) additive, can greatly enhance the reversibility and cyclability of RT Na–S batteries. A NaF‐ and Na3N‐rich cathode electrolyte interphase derived from FDMA and FEC enables a "quasi‐solid‐phase" Na–S conversion, eliminating the shuttle of polysulfides. The MTFE not only reduces polysulfide dissolution, but also further stabilizes the Na anode via a tailored solvation structure. The as‐developed RT Na–S batteries deliver a high capacity, long lifespan, and enhanced safety. [ABSTRACT FROM AUTHOR]

Wearable electronics require lightweight and flexible batteries, of which lithium‐sulfur (Li‐S) batteries are of great interest due to their high gravimetric energy density. Nevertheless, flexible Li‐S batteries have unsatisfactory electrochemical performance owing to electrode fracture during repeated bending, the volume change of sulfur species and the severe shuttle effect. Binders play essential roles in these batteries but have always lacked attention. Herein, a self‐healing polyvinylpyrrolidone‐polyethyleneimine (PVP‐PEI) binder cross‐linked by hydrogen bonds, which also regulates polysulfide redox kinetics, is reported. The dynamic hydrogen‐bonding networks repair the cracks and ensure the integrity of the electrode while numerous polar groups such as CO and ‐NH2 suppress the shuttle effect by immobilizing polysulfides. Therefore, Li‐S batteries with the PVP‐PEI binder exhibit excellent cycling stability (a capacity decay rate of 0.0718% per cycle at 1 C after 450 cycles), an outstanding areal capacity of 7.67 mAh cm−2 even under a high sulfur loading (7.1 mg cm−2) and relatively lean electrolyte conditions (E/S ratio = 8 µL mg−1). Flexible Li‐S pouch cells using the PVP‐PEI binder show a stable performance for 140 cycles and a favorable capacity retention of over 95% after 2800 bending cycles, confirming its application potential in high‐performance flexible Li‐S batteries. [ABSTRACT FROM AUTHOR]