Search

This study investigates the stabilization performance of clayey soil treated with alkali-activated hybrid slag/cement. Sodium silicate (SS) and sodium hydroxide (SH) are used as alkali activators, whereas ground blast furnace slag (GGBS) and ordinary Portland cement (OPC) are used as sources of aluminosilicate. A total of 27 different types of mixtures are used for stabilization. Unconfined compressive strength (UCS) of untreated clay and stabilized soils are performed at immediately, 3-, 7-, 28-, and 90 days curing times under air-dried and wet-cured conditions. In addition, 90-d volume and mass changes in the samples are measured. Stabilized samples with an SS/SH ratio of 1 under air-dried conditions reveal moistening at early curing ages (=28 days); afterward, sodium carbonate crystals appear in these samples at longer curing ages. Geopolymer-treated clayey soil exhibits lower volumetric and mass changes compared with OPC. Most of the stabilized clayey soil with alkali-activated hybrid slag/cement exhibits higher strength compared with OPC under air-dried and wet-cured conditions. [ABSTRACT FROM AUTHOR]

Expansive soils have been inevitable during road constructions due to its widespread availability. Conventional stabilizers; cement and lime have not been quite reliable in terms of economic, environmental, and durability perspectives. Thus, geopolymer has come into limelight as a sustainable alternative. However, the complexity of geopolymer-soil behaviour makes it challenging to predict their strength development patterns and it requires a large number of trial and error tests in laboratory scale due to the soil specific nature of such mixes. To date, no research has been attempted to develop design charts for geopolymer-expansive soil stabilization field applications. This study proposes design charts using Artificial neural networks (ANN) to predict the 28-day unconfined compressive strength (UCS) of Class F fly ash (FA) based geopolymer stabilized expansive soil (PI = 32% – 46%) to support field implementation of this novel geopolymer based soil stabilization. The model was developed based on a robust collection of literature data; FA/Soil, Activator/FA, Na 2 SiO 3 /NaOH, alkaline molarity, and their respective 28-day UCS values. Three contour plots for mix design: FA/soil vs. NaOH molarity, activator/FA vs. Na 2 SiO 3 /NaOH, and Na 2 SiO 3 /NaOH vs. NaOH molarity were proposed based on the model predictions. The proposed mix design charts were validated through the in-house tests which showed reasonable match in comparison with the predicted 28-day UCS using the contour plots. The proposed mix design charts can be employed for in-situ geopolymer-expansive subgrade stabilization to achieve strengths between 0.6 and 2.1 MPa. [ABSTRACT FROM AUTHOR]

Geopolymers, or also known as alkali-activated binders, have recently emerged as a viable alternative to conventional binders (cement) for soil stabilization. Geopolymers employ alkaline activation of industrial waste to create cementitious products inside treated soils, increasing the clayey soils' mechanical and physical qualities. This paper aims to review the utilization of fly ash and ground granulated blast furnace slag (GGBFS)-based geopolymers for soil stabilization by enhancing strength. Previous research only used one type of precursor: fly ash or GGBFS, but the strength value obtained did not meet the ASTM D 4609 (<0.8 Mpa) standard required for soil-stabilizing criteria of road construction applications. This current research focused on the combination of two types of precursors, which are fly ash and GGBFS. The findings of an unconfined compressive strength (UCS) test on stabilized soil samples were discussed. Finally, the paper concludes that GGBFS and fly-ash-based geo-polymers for soil stabilization techniques can be successfully used as a binder for soil stabilization. However, additional research is required to meet the requirement of ASTM D 4609 standard in road construction applications, particularly in subgrade layers. [ABSTRACT FROM AUTHOR]