Search

Rock and gas outbursts occur most frequently in coal mining. Gas-induced geodynamic events in dolomite are a new and unexplored phenomenon. In the last time, two outbursts of gas and dolomite have occurred in the Legnica-Głogów Copper Region in southwestern Poland, which is one of the world's largest copper ore mining regions. Gas-induced geodynamic events are dependent on the co-occurrence of two factors: rock porosity, and the presence of gas under significant pressure in the pores and crevices of the rock. This paper presents a condensed energy balance for the phenomenon of outbursts of dolomites and gases. The quantity of energy depends on the type of transformation taking place during decompression. The work produced enables first the disintegration of the rock, and then its transportation along the mine working space. This paper has focused on the estimation of the energy required to disintegrate the rock. It has been estimated that 0.38 MJ is needed for the size reduction of 1 m3 of ejected mass. Highlights: In the case of a dolomite outburst, the energy is accumulated primarily in the form of compressed gas present in the porous structure of the rock and causes the rock to disintegrate and its transport along the mine working space. Gas decompression during a gas-induced geodynamic phenomena can be between isothermal and adiabatic. Existing disintegration theories: Rittinger's, Kick's and Bond's are based consists chiefly of crushing, compression or abrasion, caused by the action of external factors. Author's theory of disintegration of research on tensile stress and is based on Brazilian tests. The disintegration of 1 m3 of rock requires the production of energy of approximately 0.38 MJ. [ABSTRACT FROM AUTHOR]

Coal mining tends to face increasing stress and gas conditions when it extends to deeper levels. The mining-induced high stress and gas pressure concentrations often result in gasogeodynamic phenomena such as rock bursts and coal & gas outbursts. Over the last decades, these gasogeodynamic events have been observed more often in the Upper Silesian Coal Basin, Poland. With the increasing mining depth, these hazards not only become a serious safety risk but also represent a significant challenge for coal mining. In order to eliminate future hazards and improve safety in underground coal mines, it is necessary to apply particular methods for the prevention and mitigation of possible hazards during mining operations. Inaction or incorrect use of preventive measures may lead to gasogeodynamic events, which may result in accidents and material losses, thereby affecting the mine's economic performance. Several coal mines operated by Jastrzębska Spółka Węglowa S.A. (JSW group), such as Pniówek, Budryk and Zofiówka coal mines have been identified as the area most prone to rock bursts as well as coal and gas outburst. Generally, the longwall panels often experience a high degree of these mining hazards. Therefore, the main aim of this research is to examine and optimise the possibility of application of prevention methods in order to reduce the frequency and scale of dangerous gasogeodynamic phenomena such as coal and gas outburst. As a main part, the field testing of the selected preventive methods that were conducted in the JSW coal mines. Based on the obtained results, the possibility of application of an optimal method for the prevention and control of coal and gas outburst in the geomining conditions of the JSW coal mines was discussed. The research results could be an example for other coal mines in mine planning and designing in the gasogeodynamic (coal and gas outburst) hazard-prone conditions. [ABSTRACT FROM AUTHOR]