Search

Woven flax-carbon hybrid polyamide biocomposites offer a blend of carbon fibers' mechanical strength and flax's environmental advantages, potentially developing material applications. This study investigated their thermal behavior, degradation kinetics, and durability to water uptake and relative humidity exposure and compared them with pure flax and carbon composites with the same matrix. The hybrid composite exhibited intermediate water/moisture absorption levels between pure flax and carbon composites, with 7.2% water absorption and 3.5% moisture absorption. It also displayed comparable thermal degradation resistance to the carbon composite, effectively maintaining its weight up to 300 °C. Further analysis revealed that the hybrid composite exhibited a decomposition energy of 268 kJ/mol, slightly lower than the carbon composite's value of 288.5 kJ/mol, indicating similar thermal stability. Isothermal lifetime estimation, employing the activation energy (Ed) and degree of conversion facilitated by the Model Free Kinetics method, indicated a 41% higher service life of the hybrid laminate at room temperature compared to the carbon laminate. These insights are crucial for understanding the industrial applications of these materials without compromising durability. [ABSTRACT FROM AUTHOR]

Fiber hybridization is suggested to enhance the properties of fiber‐reinforced composites. Regarding the matrix, thermoplastic alternatives to conventional thermosets are needed to balance mechanical performance and sustainability. We combined woven flax and carbon fibers with a polyamide 11 matrix into a hybrid biocomposite and studied its manufacturing process as well as its impact, tensile, and damping properties. Mechanical damage was investigated using scanning electron microscopy and X‐ray computed tomography. Hybridization significantly improved the tensile properties: 233% higher modulus and 432% higher strength than pure flax composites and 19% higher failure strain than pure carbon composites. Additionally, the hybrid composites exhibited a positive hybrid effect with respect to the impact resistance, characterized by higher displacement at maximum impact force and occurrence of combined damage mechanisms. Although the damping behavior of the hybrid composites remained inferior to that of pure flax composites, their damping factor was 20% higher than that of pure carbon composites. These results provide valuable insights into the mechanical performance of carbon‐flax hybrid composites. Highlights: Enhanced mechanical performance and impact resistance in woven flax‐carbon/PA11 hybrid biocomposite compared to nonhybrid reference composites.Superior tensile modulus and strength of hybrid biocomposite than pure flax fiber composite, and greater failure strain than pure carbon fiber composite.A positive hybridization effect in impact properties with a greater displacement at maximum force and higher dissipated impact energy, indicating enhanced ductility and fracture toughness.Improved damping behavior in hybrid biocomposite compared to the pure carbon composite. [ABSTRACT FROM AUTHOR]

Hybridizing carbon-fiber-reinforced polymers with natural fibers could be a solution to prevent delamination and improve the out-of-plane properties of laminated composites. Delamination is one of the initial damage modes in composite laminates, attributed to relatively poor interlaminar mechanical properties, e.g., low interlaminar strength and fracture toughness. This study examined the interlaminar bond strength, flexural properties, and hardness of carbon/flax/polyamide hybrid bio-composites using peel adhesion, three-point bending, and macro-hardness tests, respectively. In this regard, interlayer hybrid laminates were produced with a sandwich fiber hybrid mode, using woven carbon fiber plies (C) as the outer layers and woven flax fiber plies (F) as the inner ones (CFFC) in combination with a bio-based thermoplastic polyamide 11 matrix. In addition, non-hybrid carbon and flax fiber composites with the same matrix were produced as reference laminates to investigate the hybridization effects. The results revealed the advantages of hybridization in terms of flexural properties, including a 212% higher modulus and a 265% higher strength compared to pure flax composites and a 34% higher failure strain compared to pure carbon composites. Additionally, the hybrid composites exhibited a positive hybridization effect in terms of peeling strength, demonstrating a 27% improvement compared to the pure carbon composites. These results provide valuable insights into the mechanical performance of woven carbon–flax hybrid bio-composites, suggesting potential applications in the automotive and construction industries. [ABSTRACT FROM AUTHOR]