Search

Contact shots to the head often leave behind biological traces inside firearm barrels, a phenomenon of great forensic interest. Until now, the visualization and preservation of these traces presented a significant challenge, lacking a reliable method. This study addresses this gap by searching for a suitable method to extract the traces within a casting. Using alginate or gelatine as suitable materials, the results were hampered by serious adhesion issues and their extraction out of the firearm barrel was impeded. Finally, the combination of 11% gelatine with 1% alginate, introduced into the barrel around a 'central spine', succeeded to consistently produce replicable castings. Experimental contact shots displayed a distinct staining gradient from the muzzle to the rear of the barrel, as revealed through endoscopy and proved in the macroscopic casting. The technique proved effective for various common handgun barrels and successfully preserved blood and gunshot residue (GSR) patterns within the barrel. This method offers the dual benefits of visually mapping staining patterns and securing localized samples for targeted molecular genetic analysis in forensic investigations., (© 2024. The Author(s).)

Gunshot residues (GSRs) play an important role in forensic investigations of gun-related violence. The presence of GSRs has been described to help to identify the bullet entry area, as it was supposed not to be found at exit wounds. This report details the suicidal headshot of an 84-year-old male where unburned tube-like, cuboid and flake-formed powder particles have been found not only at the inside of the muzzle but also circular around the exit wound. With very short-barrelled weapons, it must be expected that part of the propellant charge leaves the barrel unburned behind the bullet. In contrast to that, the barrel length of the used weapon should lead to a complete burn-up of powder particles. The surprisingly large number of unburned powder particles present at the exit wound of the injury gave reason for further investigation to understand the underlying ballistic aspects and outlines the importance of having a close look at incidence scene photos during an investigation., (© 2022. The Author(s).)

Background: Approximately, 80% of civilian cranial gunshot injuries in India are mainly due to unlicensed mostly country-made guns, called the "Desi-Kattas," manufactured by the traditional gunsmiths. These injuries constitute a unique subgroup, with respect to the make and design along with the unique wound ballistics compared to the factory-made firearms., Objective: This study is aimed at defining the prognostic factors in predicting the outcomes related to cranial gunshot injuries due to these desi-kattas., Methods: Ten patients with kata-related cranial gunshot injury underwent surgical intervention at our institution, between 2014 and 2018. Their clinical status, imaging features, and outcomes were retrospectively analyzed., Results: Ten patients with kata-related gunshot injuries to the head were identified. Homicidal injuries were documented in six cases. Five had a GCS of 13-15 at presentation. Exit wounds were noted in 50% of the suicidal cases. Multilobar involvement was seen in 70% of cases, with the bullet crossing the midline in only 40% cases. Decompressive craniectomy was required in five cases. Eight patients had a Glasgow Outcome Score of four or more at 6 months of follow-up. There was one death during the follow-up period, while the other patient remains to be in vegetative state., Conclusion: The Katta-related cranial injuries constitute low-muzzle velocity injuries with the majority of the patients sustaining nonfatal injuries, especially homicidal. The presence of positive CT findings and the crossing of the bullet across the midline on CT brain predicts dismal prognosis. Optimal neurosurgical approach should consist of minimal local debridement and attain water seal dural closure., Competing Interests: None

Firearm injuries are a preventable epidemic in the USA. Extremities are commonly affected in gunshot injuries. Such injuries may be complex with concomitant osseous, soft tissue, and neurovascular components. The maximum wounding potential of a projectile is determined by its kinetic energy and the proportion of the kinetic energy that is transmitted to the target. Accurate assessment of ballistic injuries is dependent on utilizing the principles of wound ballistics, accurate bullet count, and ballistic trajectory analysis. The goals of this article are to review wound ballistics and the imaging evaluation of extremity civilian firearm injuries in the adult population, with emphasis on ballistic trajectory analysis, specific ballistic fracture patterns, and diffuse, secondary soft tissue ballistic injuries., (© 2021. ISS.)

Forensic recovery from fired ammunition casings remains one of the most challenging tasks during high-profile investigations. Often, the decision must be made between screening for DNA or fingerprints, and, in doing so, the impact these processes will have on the examination of ballistic markings imparted on the ammunition from the firearm itself. Traditionally, fingermark enhancement processes have yielded low success rates in their efforts to identify suspects by enhancing friction ridge detail left on the cartridge casings. Moreover, the enhancement methods utilised may often induce detrimental physical changes to the casing(s), rendering them unsuitable for subsequent ballistics (marking) examination. Recently, new technology has been shown to increase the success rate of fingermark recovery from fired ammunition, and the growing adoption of such innovation means that new challenges are encountered to maximise evidence recovery and streamline forensic workflows. One such example arises from the potential obscuration of the ammunition headstamp area during such treatments. Accordingly, this study outlines the preliminary investigations and developments of a polymer mask substrate that serves to protect the headstamp of fired ammunition casings during relevant fingermark enhancement processes. The technique also has the capacity to be used as a surface protection device to eliminate unwanted chemical deposition across other areas of interest and evidence types., (Copyright © 2022 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.)

The use of non-lethal weapons has spread worldwide, being introduced as an alternative to firearms in many countries such as the United States or the United Kingdom. Among non-lethal weapons, conducted electrical weapons have been adopted worldwide, to control unruly suspected criminals or to neutralise violent situations. The stun gun belongs to this category and is the most widely available, with more than 140,000 units in use by police officers in the field in the US, and an additional 100,000 electrical stun guns owned by civilians worldwide. In Italy, the use of conducted electrical weapons by law enforcement has only recently been introduced, with private use and commercialisation still prohibited, mainly due to controversies related to the potential dangers of such devices. Before the official adoption, several experiments had to be carried out, with mechanisms that reproduced the ballistics of the stun gun. Here we present the case of a man who suffered a self-injury trauma to his hand during a ballistics exercise with a crossbow loaded with stun gun probes. [ABSTRACT FROM AUTHOR]

In examining deaths resulting from gunshot wounds, it is important to describe the wound pathway created by the projectile. Forensic pathologists must identify all entrance and exit wounds and account for all projectiles. Occasionally, confusion arises as to whether a skin defect represents an entrance wound or not, an exit wound, or some other type of wound. Herein, we propose the descriptor "bullet track skin defect" as a formal description for a superficial skin defect created along the pathway of a projectile within the body. Specifically, we define the "bullet track skin defect" as a partial‐ or full‐thickness skin defect produced by a projectile traveling beneath the skin in a relatively tangential fashion as part of a wound pathway within the body. It is somewhat analogous to a traditional graze or superficial tangential wound, wherein the projectile traveling outside the body strikes the skin tangentially from above, without entering the body. However, the projectile is already traveling within the body with the bullet track skin defect, disrupting the skin tangentially from below rather than from above, without exiting the body. Although these defects are not a common presentation of gunshot wounds, they are certainly not rare. With this case series, we suggest that such defects may be referred to as "bullet track skin defects." Alternative language that can substitute for "bullet track skin defects" includes "bullet track skin wounds" or "bullet track cutaneous defects." [ABSTRACT FROM AUTHOR]

A mathematical simulation of the internal ballistics of a shot from a gun, depending on the design of the charge of the gun, has been performed. A general system of equations defining the unsteady movement of a two-phase gas–powder mixture in the channel of the barrel of a gun in the one-dimensional approximation is presented. Results of simulation of a shot from a gun charged with tubular powder or chopped powder are presented. The influence of the gradual ignition of a powder in a gun and of its nonstationary and erosion burning in it on the parameters of the ballistic process in the gun and the influence of the mass and disposition of an igniter in the gun on the dynamics of a shot from it were investigated. [ABSTRACT FROM AUTHOR]

In the era of unmanned war, with the increasing muzzle velocity requirement, the design of gun is significantly restricted by recoil, especially for guns installed on unmanned aerial vehicles. A recoilless gun with combustible cartridge was designed to eliminate recoil and increase projectile velocity, and the influence of main parameters on recoil was studied. First, a design of a recoilless gun with high projectile velocity is proposed based on combustible cartridge case. Next, a classical interior ballistic model is developed during the recoilless gun firing cycle, and the effect of main parameters of interior ballistics on the performance is investigated. Additionally, simple nonlinear fitting formulae are defined to highlight the variation of recoil momentum with the time of interior ballistic model. Finally, numerical simulation results are compared with the test results to validate the feasibility of the design. The experimental results demonstrate that the classical interior ballistic model can be used to accurately analyze the effect of the parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocity of the recoilless gun could raised to 1200 m/s and the recoil momentum could be eliminated almostly. Therefore, the newly designed recoilless gun effectively eliminates the recoil momentum and significantly improves the projectile velocity. The findings should make an important contribution to the field of engineering applications of recoilless gun. [ABSTRACT FROM AUTHOR]

Traumatic injuries from civilian gunshot injuries represent a significant clinical burden to orthopaedic surgeons worldwide. Furthermore, the incidence of such injuries is increasing. Having a sound understanding of the pathophysiology associated with gunshot injuries and the appropriate management algorithm is vital. This chapter aims to review the current evidence regarding the incidence and prevalence of civilian ballistic trauma, the pathophysiological processes associated with these injuries, and the recommended management from emergent care at the time of injury to definitive surgery and rehabilitation. [ABSTRACT FROM AUTHOR]

This article deals with Ballistic interpretation of gunshot traces by presenting the main theoretical and practical aspects, which are related to forensic ballistics, firearms, traces left by them and some elements of forensic tactics and technique. [ABSTRACT FROM AUTHOR]

The high recoil force of a high-power gun produces a strong impact on the carrier, which severely limits the application of the high-power gun mounted on vehicles. A gas-controlled side-jet gun was designed to reduce the recoil force, and the gas-solid transient flow in the bifurcated tube of the gun was studied. First, a one-dimensional two-phase interior ballistics model was established considering the gas-solid coupling between the propellant gas and the valve in the front gas tube. Then, the propagation of the rarefaction wave in the barrel was studied, and the flow field distribution in the bifurcated tube was obtained. Finally, the mechanism of recoil reduction was analyzed. Results show that the bifurcated two-phase flow model can be used to accurately analyze the effect of the gas-controlled side-jet gun's parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocities of the gas-controlled side-jet gun and the traditional gun are 955.7 m/s and 960 m/s, respectively. The projectile velocity loss of the gas-controlled side-jet gun is less than 0.5 %. The recoil momentum of the traditional gun and the gas-controlled side-jet gun are 538.62 N·s and 336.68 N·s, respectively. The recoil momentum of the gas-controlled side-jet gun decreases by 37.49 %. Additionally, the single firing time of the gas-controlled side-jet gun (18.91 ms) is less than that of the traditional single-barrel gun (more than 60 ms). Therefore, the newly designed gas-controlled side-jet gun significantly reduces the recoil momentum without losing the projectile velocity and continuous firing mode. [ABSTRACT FROM AUTHOR]

The sodium rhodizonate test is a simple colorimetric technique used to identify traces of lead and barium. A positive test provides rapid and photographically documentable results for shots fired at distances not exceeding 50 cm. Usually, this method is not used for identification of the firing hand, which is detected by electron microscopy with energy dispersive analysis (SEM-EDX), requiring the removal of any particles on the surface to be analyzed by STUB. The use of Sodium Rhodizonate, which is undoubtedly less selective, has the disadvantage of target element solubilization (lead and barium) and thus the loss of the preliminary morphological investigation of the particles. The purpose of this paper is to demonstrate that the two indicated methods can be considered complementary in the following order: 1. buffer sampling for electron microscopy investigation (STUB); 2. and subsequent performance of the Sodium Rhodizonate Test. In some special cases, when it is necessary to obtain the result more quickly, with regards to respecting the chronology of the aforementioned tests, it may be useful to carry out the Sodium Rhodizonate Test first, especially when particular and perhaps antiquated weapons were used for suicidal purposes causing considerable gas dispersion and shot residues from the mechanisms. This research illustrates how significant results were obtained substantiating the suicide hypothesis, following the use of an old revolver (year of manufacture around 1915-1920). [ABSTRACT FROM AUTHOR]

Copyright of Problems of Mechatronics. Armament, Aviation, Safety Engineering / Problemy Mechatroniki. Uzbrojenie, lotnictwo, Inżynieria Bezpieczeństwa is the property of Index Copernicus International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The balancing force of the interior ballistics is an important issue in the design of the recoilless gun. It has been found in practice that the balancing force design method for recoilless guns based on the traditional classical interior ballistic theory cannot guide the balance from the physical mechanism and process. In order to study the unbalanced force experienced by the recoilless gun during the firing of the projectile and the variation law of its various parameters with time, the analysis and calculation method of the balanced interior ballistics is proposed in this article. This method separately models the aerodynamic and propellant combustion processes of the recoilless gun, using the characteristic line method to solve the model numerically. This method can be used to predict the change of the unbalanced force acting on the recoilless gun during the projectile firing of the recoilless gun. The reliability of the algorithm is verified by the interior ballistic performance when China 78 type 82 mm recoilless smoothbore gun launches the projectile. The study found that the unbalance impulse generated by the gas inside the barrel fired by the recoilless gun accounts for only 1.5 % of the total recoil impulse, but it has a great influence on the amount of impulse a shooter has can take. This approach provides a better understanding of this complex internal ballistic process, which has important implications for the design and improvements of recoilless guns. [ABSTRACT FROM AUTHOR]

The wounding potential of a projectile depends on its kinetic energy. The aim of the study was to investigate the deceleration of non-deforming full metal jacket handgun bullets (FMJ) in gelatine blocks of increasing length. The temporary cavity (TC) was visualized using a SA-X2 Photron camera. 126 test shots in 9 mm nominal calibre were fired under strict temperature control conditions (4°C) at small gelatine blocks ranging from 2 to 12 cm in length. The deposited energy was calculated based on the loss of bullet velocity through high-speed video analysis. The length of the TC was measured, when the TC reached its maximum height. The volume of the TC was approximated by a cylinder. Regression analysis showed a linear correlation between the length of the bullet path and the energy transfer. The constant deceleration of the FMJ bullets in gelatine up to 12 cm bullet path was confirmed across various brands and velocity ranges (270–450 m/s). Higher impact velocities correlated with increased loss of energy in the target medium. The shape of the bullet tip influenced the characteristic of deceleration. The volume of the tubular temporary cavity, derived from high-speed video records, was found to be proportional to the energy transferred. The proposed approach might be a valuable tool in advancing wound ballistics research. • Deceleration of FMJ bullets proportional to bullet path in compact target models. • Higher impact velocities resulted in greater loss of energy in the target medium. • The shape of the bullet tip influenced the characteristic of deceleration. • Proportionality of the temporary cavity to the transferred energy. [ABSTRACT FROM AUTHOR]

Copyright of Problems of Mechatronics. Armament, Aviation, Safety Engineering / Problemy Mechatroniki. Uzbrojenie, lotnictwo, Inżynieria Bezpieczeństwa is the property of Index Copernicus International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Journal of Explosives & Propellants is the property of Chinese Journal of Explosives & Propellants Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The appearance of high-entropy alloys (HEAs) makes it possible for a material to possess both high strength and high ductility. It is with great potential to apply HEAs under extreme conditions such as in the penetration process. In this paper, experiments of WFeNiMo HEA and tungsten heavy alloy (WHA) projectiles penetrating medium-carbon steel were conducted by using the ballistic gun and two-stage light-gas gun that can accelerate projectiles to impact velocities ranging from 1162 m/s to 2130 m/s. Depth of penetration (DOP) at elevated impact velocities of HEA and WHA projectiles were obtained firstly. Combined with the macroscopic and microscopic analysis of the residual projectiles, the transition of the penetration mode of the WFeNiMo HEA projectile was identified systemically. The experimental results indicated that the penetration mode of the HEA projectile changes from self-sharpening to mushrooming with the increase of impact velocity, while for the WHA projectile, the penetration mode is always mushrooming. The microstructure of the residual HEA projectiles showed that the phases tangle with each other and the morphology of the microstructure of the phases differs in the two penetration modes. Besides, the evolution of shear bands and fractures varies in the two modes. The evolution of the microstructure of HEAs causes the sharp-pointed nose to disappear and the HEA projectile ultimately becomes blunt as the impact velocity increases. [ABSTRACT FROM AUTHOR]

A two-dimensional axisymmetric model, employing a dynamic mesh and user-defined functions, is used to numerically simulate the transient multiphase flow field produced by an underwater gun. Furthermore, a visualized shooting experiment platform with a high-speed camera is built to observe the evolution process of such a multiphase flow field. The simulated phase distribution diagram is agreed well with the shadow photo of the experiment, indicating that the numerical model is reasonable. Further examinations of the multiphase flow fields by using the submerged and sealed launch methods show that use of the sealed launch can significantly improve the interior ballistic performance of an underwater gun. In the cases by using these two types of underwater launch methods, the displacement of the projectile within the range of the muzzle flow field meets the exponential law over time. Moreover, a not fully developed bottle-shaped shock wave is formed when t = 0.4 ms, but this bottle-shaped shock wave expands more rapidly for the sealed launch. In addition, the amplitude of pressure oscillation for the sealed launch is larger than that of the submerged launch, but the pressure oscillation of the sealed launch lasts shorter. [ABSTRACT FROM AUTHOR]

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User's domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers. There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a Userfriendly overview of all such interfaces and provide unique guidance as to their criticality and influence. [ABSTRACT FROM AUTHOR]

Rarefaction wave gun can significantly reduce the recoil and the barrel heat without affecting projectile velocity during the launching process. This paper aims to improve the understanding of the muzzle flow characteristics during a rarefaction wave gun firing and clarify the different ballistic behaviors between the rarefaction wave gun and the traditional gun. First, the mathematical models and the numerical methods of the muzzle flow with the interior ballistic process were established. Then, the numerical simulation results were compared with the experimental data to validate the reliability and accuracy. Next, the rarefaction wave propagation behavior was described, and the interior ballistic process of the rarefaction wave gun was compared with that of the traditional gun. Then the development law of the muzzle flow field for the rarefaction wave gun coupled with the interior ballistics process was studied. Finally, the different detailed results of the muzzle flow between the traditional gun and the rarefaction wave gun were investigated. The development processes of the muzzle flow in both guns are generally similar, but the strength of the main flow parameters and the ballistic performances for the rarefaction wave gun are smaller than that for the traditional gun due to the rarefaction wave influence. This paper could provide a valuable reference for the research and design on the rarefaction wave gun. [ABSTRACT FROM AUTHOR]

• Thermal modification does not significantly change the ballistic performance of coastal western hemlock CLT. • Density and hardness do no fully encompass the energy absorbing capacity of CLT under small arms ballistic threats. • Empirically fit UFC partial penetration equation formulations fit treatment specific datasets with minimal error. • One global UFC partial penetration equation can be utilized for design with an appropriate safety factor. To test and understand the potential for integration of thermally modified coastal western hemlock CLT systems in military applications, 109 ballistic experiments were conducted at the United States Army Engineer Research Development Center's Fragmentation Simulation Facility. For a range of CLT thicknesses, the depth of penetration and residual velocities were recorded for different striking velocities utilizing a 0.50 caliber steel sphere projectile. This information was used to compare and add to the existing ballistics data for CLT, investigate the effects of thermal modification on high strain rate loading of wood, assess physics-based empirical design equations used by the Unified Facilities Criteria, and evaluate energy absorbing behavior at a range of thicknesses and striking velocities. The experimental results showed that thermal modification does not significantly alter the full and partial penetration performance of coastal western hemlock CLT. However, the mechanism of fracture along the path of the projectile differed, which indicates that the model parameters used in the UFC design equation (density, hardness, and projectile properties) may not fully encompass the ballistic failure mechanisms of CLT. [ABSTRACT FROM AUTHOR]